specification sheet lumenbeam - lumenpulseappv1.lumenpulse.com/.../files/...lbm_spec_sheet.pdf ·...
Post on 09-Jun-2020
3 Views
Preview:
TRANSCRIPT
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
1/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
838 "
[212mm]
714 "
[185mm]
4
1316 "
[122mm]
101116 "
[271mm]
Standard Yoke (as shown, included)
0°
90°
165°Standard Yoke Mounting
Adjustable pivot limits
70°
Client Project name
Order# Type Qty
FEATURES AND BENEFITS
Physical :• Low copper content high pressure die-cast aluminum housing• Heavy aluminum formed yoke (standard yoke included)• Stainless steel hardware• Silicone sealing devices• Clear tempered glass• Dual chamber design for heat management and ease of maintenance• Electro-statically applied polyester powder coat finish• 3.05 kg / 6.7 lbs• EPA: Front = 0.46 sq. ft./0.042 sq. m. Side = 0.37 sq. ft./ 0.034 sq. m.• IP66• IK09 rated• Meets 3G ANSI C136.31 Vibration standard for bridge applications• Corrosion-resistant coating for hostile environments*
Performance :• Minimum 1fc (10.7 lux) @ 274 feet (83m) distance (4000K, 6° optic)• 1,891 delivered lumens and 75,232 candelas at nadir (4000K, 6° optic)• 6°, 10°, 20°, 40° or 60° optics available• CRI value: 80+ • Lumen maintenance 120,000 hrs [L70 @ 25°C]• Lumen measurements comply with LM - 79 - 08 standard• Operating temperatures: -25° C to 50° C [-13F to 122F]
Electrical :• Line voltage luminaire for 100 to 277V• Power and data in 1 cable, 3ft/1 m cord (#16-5)• 28 watts• Dimming options: 0-10 volt, DMX/RDM enabled or DALI
* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure!
IK09CERTIFICADO No.05884,
05885RETILAP
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
2/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
MOUNTING OPTION
Short Yoke mountingadjustable pivot limits
2"[51mm]
7"16
516 "
[8mm]
[11mm]
SYShort Yoke Mounting
Standard and Short Yoke mountingholes pattern
OPTICAL OPTIONS*Factory installed
LSLHLinear Spread Lens
Horizontal distribution(not adjustable on site)
LSLVLinear Spread LensVertical distribution
(not adjustable on site)
Factory installed, available for 6° to 40° optics.See Optical Accessories for field adjustable spread lens.
714 "
[185mm]8 5
16 "
[211mm]
838 "
[212mm]
41316 "
[122mm]
0°
105°
20°
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
3/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
ACCESSORIES Order separately
PM4-1, PM4.5-1, PM5-1Round Pole Mounting accessory
single �xture
PM4-2, PM4.5-2, PM5-2 Round Pole Mounting accessory
twin �xtures
PM4 Round Pole Mounting Accessory Shown*Consult factory for square pole section
When PM4-2, PM4.5-2 or PM5-2 are speci�ed,one bracket assembly is supplied per 2 �xtures unless
otherwise speci�ed.
Mounting Accessories
75
16 "[185mm]
1578 "
[403mm]
2 316 "
[55mm]
TN2Tenon adapter
to �t on 2 3/8” O.D. tenon
TN4Tenon adapter
to �t on 4” O.D. tenon
578 "
[149mm]
3
1516 "
[100mm]
212 "
[63mm]
578 "
[149mm]
418 "
[105mm]
31516 "
[100mm]
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
4/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
ACCESSORIES - continuedOrder separately
Mounting Accessories
[271mm]
10 1116 "
"8[473mm]
518
838 "
[213mm]
FRONT VIEW
SKStake Mounting
SIDE VIEW
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
5/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
ACCESSORIES - continuedOrder separately
Optical Accessories:LBM-SN-___-BK Snoot accessory. Please specify desired exterior finish from the list below.
Interior surface painted black.
LBM-SNW-___-BK Snoot Wide accessory. Please specify desired exterior finish from the list below.Interior surface painted black.
LBM-VS-___-BK Visor accessory. Please specify desired exterior finish from the list below.Interior surface painted black.
LBM-WG-___ Wire Guard accessory. Please specify desired exterior finish from the list below.
LBM-LSLA-___ Linear Spread Lens Adjustable accessory. Please specify desired exterior finish from the list below.
Available finishes:BK - Black SandtexBRZ - Bronze SandtexSI - Silver SandtexWH - Smooth white, low glossBKTX - Textured blackBRZTX - Textured bronze, non-metallicGRATX - Textured medium grayGRNTX - Textured greenWHTX - Textured whiteCC - Custom color and finish (please specify RAL color)1
Accessory combinations: Snoot
Snoot+
Visor
Linear SpreadLens Adjustable
Visor Wire Guard
NO NO YES
NO NO YES
YES
Snoot Wide
NO
NO
YES YES NO
Accessory combinations must be ordered together on a single line.Ex: A Snoot + Wire Guard combination order code is LBM-SNWG-BK-BK.
Notes:1 North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate colorcharts. Final color matching results may vary.
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
6/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
ACCESSORIES - continuedOrder separately
Control Systems:LTO2 Lumentouch is a wall mount DMX 512 controller keypad.
LCU Lumencue is a USB / mini SD DMX 512 controller.
LID LumenID is a diagnostic and addressing DMX 512 controller.It must be specifi ed on all DMX applications.Refer to LID specifi cation sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controllerwith a push button rotary dial and live feedback.
Control Boxes:CBX DMX/RDM control box.
Up to six power and data outputs to fi xtures or fi xture runs.Ethernet enabled option.Refer to CBX specifi cation sheet for details.
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
7/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
TYPICAL WIRING DIAGRAMS
Dimming Version (0-10V)10% minimum dimming value
Non-Dimming Version
JBOX
100-277V#16-5 Power& data cable
(by others)
100-277V
JBOX
Junction box(by others)
To fixture
To nextfixture
Fromprevious
fixture
Ground greenNeutral white
Line black
Wire-nuts
#16-3 Powercable
(by others)
Dimmer
Ground greenNeutral white
Line black
Data- orangeData+ red
Wire-nuts
Junction box(by others)
Fromdimmer
100-277V Tofixture
To nextfixture
Maximum run lengths - 15A maximum, 16AWG cable,10' [3m] on center spacing
Configuration/Voltage 240V 277V
53
49
58
5450ft from electrical panel
10ft from electrical panel
120V
33
29
208V
48
44
Notes: 1 Run length calculations are based on a voltage drop of no more than 25V.2 Consult factory for specific applications and max. cable length recommendations.3 0-10V mA Ratings: Passive Dimmer (Current Sink): 3mA per fixture Active Dimmer (Current Source): 0.5mA per fixture
AmericanColor Code
CEColor Code
Black Brown
Red/Purple BlackOrange Grey
White Blue
USE
Live 100-277V
0-10V / Data +
Green Yellow/Green Ground
0-10V / Data -
Neutral
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
8/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
TYPICAL WIRING DIAGRAMS - continued
Dimming Version (DALI)1% minimum dimming value
JBOX
100-277V#16-5 Power& data cable
(by others)
TypicalDALI
Controller
Ground greenNeutral white
Line black
Data- orangeData+ red
Junction box(by others)
FromDALI controller
Tofixture
To nextfixture
Maximum run lengths - 15A maximum, 16AWG cable,10' [3m] on center spacing
Configuration/Voltage 240V 277V
53
49
58
5450ft from electrical panel
10ft from electrical panel
120V
33
29
208V
48
44
Notes: 1 Run length calculations are based on a voltage drop of no more than 25V and a 64 fixture limit per DALI loop.2 Consult factory for specific applications and max. cable length recommendations.
AmericanColor Code
CEColor Code
Black Brown
Red/Purple BlackOrange Grey
White Blue
USE
Live 100-277V
0-10V / Data +
Green Yellow/Green Ground
0-10V / Data -
Neutral
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
9/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
TYPICAL WIRING DIAGRAMS - continued
Daisy Chain Layout (DMX/RDM)1% minimum dimming value
Star Layout (DMX/RDM)1% minimum dimming value
100-277V
CBX-ST
#16-5 Power &data cable(by others)
#16-5 Power &data cable(by others)
Ground greenNeutral white
Line black
Data+ redData- orange
Wire-nuts
Junction box(by others)
lumenterminator(use at the endof each run only)
Fromfixture or
CBXToFixture
Ground greenNeutral white
Line black
Data+ redData- orange
Wire-nuts
Junction box(by others)
lumenterminator(use at the endof each run only)
Fromfixture or
CBXToFixture
JBOX
JBOX
Data out to next CBX(optional,not isolated/not boosted)
100-240V
Lumentouch 2.0
CBX-DS
100-277V
Data out tonext CBX(optional,
not isolated/not boosted)
Datainput
100-240V
Lumentouch 2.0
DMX terminator is required at the end of each run to maintaindata integrity.
(2x) DMX lumenterminator included per CBX-DS(6x) DMX lumenterminator included per CBX-ST
See installation instructions for details.
Maximum run lengths - 15A maximum, 16AWG cable,10' [3m] on center spacing
Configuration/Voltage 240V 277V
32
32
32
3250ft from CBX
10ft from CBX
120V
32
29
208V
32
32
Notes: 1 Run length calculations are based on a voltage drop of no more than 25V and a 32 DMX/RDM enabled fixture limit per DMX/RDM run.2 Consult factory for specific applications and max. cable length recommendations3 Each fixture requires 1 DMX address.4 6 outputs max. per CBX-ST, 1 output max. per CBX-DS.
AmericanColor Code
CEColor Code
Black Brown
Red/Purple BlackOrange Grey
White Blue
USE
Live 100-277V
0-10V / Data +
Green Yellow/Green Ground
0-10V / Data -
Neutral
MEDIUMWHITE & STATIC COLORS
S.Ayite - Rev.26
10/10
26/AL/2016
Specification Sheet lumenbeam™
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003 F. 514.937.6289info@lumenpulse.comwww.lumenpulse.com
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
LBM 1 2 3 4 5 6 7 8
HOW TO ORDER
1 Housing:
LBM - Lumenbeam™ Medium
2 Voltage:
100 - 100 volts120 - 120 volts208 - 208 volts
220 - 220 volts240 - 240 volts277 - 277 volts
3 Colors and Color temperatures:
27K - 2700K30K - 3000K35K - 3500K40K - 4000K57K - 5700KRD - RedGR - GreenBL - Blue
4 Optic:
VN - Very Narrow 6°
NS - Narrow Spot 10°
NF - Narrow Flood 20°
FL - Flood 40°
WFL - Wide Flood 60°
5 Optical Option:
LSLH - Linear Spread Lens Horizontal distribution1
LSLV - Linear Spread Lens Vertical distribution1
6 Finish:
BK - Black SandtexBRZ - Bronze SandtexSI - Silver SandtexWH - Smooth white, low glossBKTX - Textured blackBRZTX - Textured bronze, non-metallicGRATX - Textured medium grayGRNTX - Textured greenWHTX - Textured whiteCC - Custom color and finish (please specify RAL color)2
7 Control:
NO - No DimmingDIM - 0-10V Dimming option3
DMX/RDM - DMX/RDM enabled4
DALI - DALI Dimming option5
8 Option:
SY - Short Yoke3GV - 3G ANSI C136.31 Vibration RatingCRC - Corrosion-resistant coating for hostile environmentsCE - CE (certification covers European Economic Area)
Notes:1 Factory installed, available for 6° to 40° optics. See Optical Accessories for field adjustable spread lens. 2 North American RAL colors specified with RAL number only are provided with asmooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary. 3 10% minimum dimming value.Current Sink: 3mA/fixture, Current Source: 0.5mA/fixture. 4 1% minimum dimming value. 1 DMX address per fixture. 5 1% minimum dimming value.
top related