specifications - acuity brands. peerless lighting ... bruno project: ... peerless lighting reserves...
Post on 04-Jul-2018
255 Views
Preview:
TRANSCRIPT
CATALOG NUMBER
AVAILABLE FIXTURES
SPECIFICATIONS
ORDERING LOGIC
S P E C I F I C A T I O N S
PEERLESS LIGHTING • Box 2556, Berkeley, CA 94702-0556 • Tel: 510.845.2760 • Fax: 510.845.2776 • peerless-lighting.com
_________ _________ _________ _________ _________ _________ _________ _________ FT _________ _________ _________ _________ _________ _________ _________ _________ _________ _________ ____________________
BRM4 1 T8 WHR
BRM4 3 T8 WHR
BRM4 2 T8 WHR
BRM4 1 T8 WHR
BRM4 3 T8 WHR
BRM4 2 T8 WHR
BRM4 1 T8 WHR
BRM4 3 T8 WHR
BRM4 2 T8 WHR
Type: ________________________
Project: ______________________
Use guide below to order complete fixture runs from four feet to one-hundred feet in increments of four.
© 2008 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark, and “Bruno” is a trademark of Acuity Brands Lighting. Products in this brochure may be covered by one or more U.S. Patents and Patents Pending. Peerless Lighting reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
1 11⁄16”
8 1⁄4”
BRM4 - 1 BRM4 - 2 BRM4 - 3
1⁄2”
1 11⁄16”
8 1⁄4”1⁄2”
1 11⁄16”
8 1⁄4”1⁄2”
Bruno®
Indirect / Direct T8
Pendant Mount — Modular / 8” X 2” Rectangular BRM4
Examples: BRM4 2 32 SPR 40FT R8 277 GEB10 DCT LP835 F1/18 SCEP — BRM4 3 32 SPR 32FT R8 277 GEB10 1SE EL DCT LP835 F1/21
ConstructionHousing is a nominal 8 1⁄4” x 1 11⁄16” rectangular channel formed from cold-rolled steel. 5⁄8” thick aluminum die cast end cap is standard, 4” sculpted die cast aluminum end cap is optional.
ReflectorsDie formed specular reflector with 95% reflectance.
ShieldingTwo choices: 1) Aluminum semispecular parabolic louver. 2) Optional white painted aluminum
parabolic baffle. Each available with optional acrylic opal overlay.
FinishFine textured white polyester powder paint is standard. Consult factory for special finish requirements.
ElectricalSpecify 120V, 277V, or 347V. Pre-wired with 16AWG fixture wire. For special circuiting or wire
gauge, consult factory. Plug-in electrical connectors included. UL and C-UL listed and labeled.
Fixture Length4’ 3⁄8” and 8’ lengths in a single section for nominal support spacing 4’-0” and 8’-0”. For total fixture length, add 5⁄8” for each flat end cap and 4” for each sculpted end cap. Using internal joiners, 4’ and 8’ sections can be joined to form longer rows. Consult factory for availability of 12’ length fixture section.
Notes:1 Must be in 4’ increments.2 Optional.3 EL and EC are installed in last 4’ of fixture sections and are not available concurrently
with each other. Separate feed required for each EL or EC unless ELS/ELH is specified.
4 Available with standard distribution only.5 Available with 3 lamp cross section only.6 Not available in 347 volt.
_________ _________ _________ ______________ ______________ ______________ ______________ ___________ FT ____________ _________ ________________ ______________
Fixture
BRM4
# of Lamps in Cross Section
123
Lamp Type
32
Distribution
Blank Standard 65/35
20/80 20% Up, 80% Down
40/60 40% Up, 60% Down
0/100 0% Up, 100% Down
CLI Center Lamp Isolater5
Reflector
SPR4 Specular Reflector
Shielding
BlankOPD Baffle
w/ std brightness diffuser/Opal overlay
Baffle
SSB Semi Specular Louver
WPB White Parabolic Baffle
Nominal Row Length1
Maximum Section Length
R4R8
Voltage
120277347
Ballast Type
GEB10 <10% THD ELECTRONIC
ADEZ6 Advance Mark 10 dimming
ECO106 Lutron ECO-10 dimmingADZT6 Advance Mark 7 0-10v
dimming
Reference Ballast Chart on website or consult factory for other options.
# of Emergency Modules2
Blank No Emergency
1SE 1 section2SE 2 sectionsXSE X sections
______________ ______________ ________________ ______________ / ______________ ______________ _________________________________
Emergency Type2,3
Blank No Emergency or Night Light
EL Emergency Battery Pack
EC Emergency / Night Light Circuit
EN Emergency Battery Pack with Night Light Circuit
Switching
SCT Single Circuit
DCT Dual Circuit
Lamp Color
L/LP No LampLP730 3000K 70+ CRILP735 3500K 70+ CRILP741 4100K 70+ CRILP830 3000K 80+ CRILP835 3500K 80+ CRILP841 4100K 80+ CRI
Reference Lamp Chart on website or consult factory for other options.
Mounting Type /
F1 T-Bar Ceiling (Universal Mounting Bracket)
F1A T-Bar Ceiling (UMB with Integrated J-Box)
F2 Hard Ceiling (Horizontal J-Box)
F3 Stem MountF4A IDS Clip 15⁄16” TeeF4B IDS Clip 9⁄16” TeeF4C IDS Clip Screw Slot
Overall Suspension
12 12” overall suspension15 15” overall suspension18 18” overall suspension21 21” overall suspension24 24” overall suspensionXX XX” overall suspension
Finish
C210 Standard White White (fine-textured low gloss)
C110 Painted to match Aluminum Finish
C099 Custom Color
Options
ACG Adjustable Cable GrippersAPF Alternate Power FeedCP Chicago PlenumDL Damp Location LabelDU Dust CoverELH EM Through wire w/ Separate FeedELS EM Through Wire w/ Single FeedGLR Fusing (Fast blow)GMF Fusing (Slow Blow)NYC New York City CodeSCEP Sculptured End Cap
BRM-15
PEERLESS LIGHTING • Box 2556, Berkeley, CA 94702-0556 • Tel: 510.845.2760 • Fax: 510.845.2776 • peerless-lighting.com
P H O T O M E T R I C S
© 2008 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark, and “Bruno” is a trademark of Acuity Brands Lighting. Products in this brochure may be covered by one or more U.S. Patents and Patents Pending. Peerless Lighting reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
Type: ________________________
Project: ______________________Bruno®
Indirect / Direct T8Pendant Mount — Modular / 8” X 2” Rectangular BRM4
1-LAMP T8 WITH SPECULAR REFLECTOR AND OPD 1-LAMP T8 WITH SPECULAR REFLECTOR
2-LAMP T8 WITH SPECULAR REFLECTOR 3-LAMP T8 WITH SPECULAR REFLECTOR
BRM-16
PEERLESS LIGHTING • Box 2556, Berkeley, CA 94702-0556 • Tel: 510.845.2760 • Fax: 510.845.2776 • peerless-lighting.com
P H O T O M E T R I C S
© 2008 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark, and “Bruno” is a trademark of Acuity Brands Lighting. Products in this brochure may be covered by one or more U.S. Patents and Patents Pending. Peerless Lighting reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
Type: ________________________
Project: ______________________
Pendant Mount — Modular / 8” X 2” Rectangular BRM4
Bruno®
Indirect / Direct T8 — 20/80 VDR
1-LAMP T8 WITH WHITE REFLECTOR 2-LAMP T8 WITH WHITE REFLECTOR
3-LAMP T8 WITH WHITE REFLECTOR
BRM-17
PEERLESS LIGHTING • Box 2556, Berkeley, CA 94702-0556 • Tel: 510.845.2760 • Fax: 510.845.2776 • peerless-lighting.com
P H O T O M E T R I C S
© 2008 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark, and “Bruno” is a trademark of Acuity Brands Lighting. Products in this brochure may be covered by one or more U.S. Patents and Patents Pending. Peerless Lighting reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
Type: ________________________
Project: ______________________
Pendant Mount — Modular / 8” X 2” Rectangular BRM4
Bruno®
Indirect / Direct T8 — 40/60 VDR
1-LAMP T8 WITH WHITE REFLECTOR 2-LAMP T8 WITH WHITE REFLECTOR
3-LAMP T8 WITH WHITE REFLECTOR
BRM-18
PEERLESS LIGHTING • Box 2556, Berkeley, CA 94702-0556 • Tel: 510.845.2760 • Fax: 510.845.2776 • peerless-lighting.com
P H O T O M E T R I C S
© 2008 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark, and “Bruno” is a trademark of Acuity Brands Lighting. Products in this brochure may be covered by one or more U.S. Patents and Patents Pending. Peerless Lighting reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.
BRM-19
Type: ________________________
Project: ______________________
Pendant Mount — Modular / 8” X 2” Rectangular BRM4
Bruno®
Indirect / Direct T8 — 0/100 VDR
1-LAMP T8 WITH WHITE REFLECTOR 2-LAMP T8 WITH WHITE REFLECTOR
3-LAMP T8 WITH WHITE REFLECTOR
top related