standard for pump performance and quality… · mec 80x65-160 5.5-15kw mfa 50x32-200 5.5-11kw mfb...
Post on 03-Jul-2020
1 Views
Preview:
TRANSCRIPT
Form 2723B Sept 2008
“STAR-LINE” CENTRIFUGAL
MOTORPUMPS
“STAR-LINE” CENTRIFUGAL
MOTORPUMPS
SIMPLE SERVICINGBack-Pull-Out and
Assembly
Southern Cross “Star-Line”Motorpumps offer time and costsaving advantages during servicing.Pump body, with suction anddischarge lines attached, remainsundisturbed during back-pull-out andreassembly. The complications offlexible coupling disassembly andrealignment associated with longcoupled pump units are also totallyeliminated .
“STAR-LINE”PUMP MOUNTING
Wells and other restricted areas are no problem forSouthern Cross “Star-Line” Motorpumps. Mountingis simple and efficient in all applications.
“STAR-LINE”SPACE SAVING
A substantial cost saving feature of Southern Cross“Star-Line” Motorpumps is the reduced spacerequirement over conventional long coupledcentrifugal pump units. In building design, plantroomspace can be reduced substantially forbig savings on floor area.Where space is alreadylimited “Star-Line”Motorpumpsprovide a spacesaving andeconomicalsolution.
SPACESAVING
APPLICATIONS
● Designed for efficient and reliable general purpose water transfer in industry, building services and irrigation.
FEATURES
● Space saving design
● Superior hydraulic design & manufacturing methods produce significantlyhigher efficiencies forlower running costs and reduced maintenance.
● Australian designed and manufactured.
● Up to 250 litres persecond discharge.
● Australia wide serviceand backup.
● 32 to 200mm discharge.
● Wide range of options.
● Heads to 160 metres.
…setting thestandard for pumpperformance and quality…
Special design features of Southern Cross“Star-Line” Motorpumps include the use ofstandard off-the-shelf foot and flangedelectric motors with highly accurate clampon shaft extensions; taper mounted andkeyed impeller for easy removal from shaftduring servicing and positive locking duringoperation; heavy duty stainless steel shaftextension for safe operation at high speed;AS1830/T260 cast iron volute for addedsafety; reusable “O” ring body seal;hydraulically and dynamically balancedimpellers; and highly efficient suctionperformance from double curvature impellervanes.
● STANDARD FEATURES
Type 316 stainless steel shaft extension;S.G. cast iron motor shaft clamp; TEFC IP55motor; rugged cast iron volute with integralsuction and discharge flanges and mountingfeet; pressure rated to 1600kPa (160 metreshead); cast iron impeller and backplate;stainless steel impeller nut; rigid cast ironbell housing connects motor and pumphousing; and single mechanical seal.
● OPTIONAL MATERIALS
Zinc-free bronze impeller and Molybondcoating.
● OPTIONAL EXTRASZinc-free bronze wear rings for impeller,volute and backplate; optional singlemechanical seals; opt ional motorspecifications and classes; works certifiedand witnessed tests for guaranteedperformance; impeller turn-downs; andpressed or welded steel baseplates.
● MAXIMUM OPERATING TEMP.
Maximum pumped liquid temperature forSouthern Cross “Star-Line” Motorpumps is100°C using standard seals. Liquids up to140°C can be handled using special seals…consult Southern Cross Customer ServiceUnit for further information.
● 2 YEAR WARRANTY
Australian made to…ISO 2858
International StandardREDUCED RUNNING COSTSSuperior hydraulic design and high technologymanufacturing methods produce significantly higherefficiencies for less power consumption and minimummaintenance …features which guarantee Southern Cross“Star-Line” Motorpump users continuing savings in allapplications.
GENERAL-PURPOSE PUMPSSouthern Cross “Star-Line” Motorpumps offer top efficiencyand reliability for a full range of general purpose watertransfer applications in industry, building services andirrigation.
INTERNATIONAL STANDARDConforming with ISO2858 Standard means dimensionalinterchangeability with other makes of pumps, manufacturedto the same international standard, however because ofdesign superiority Southern Cross “Star-Line” Motorpumpsexceed the performance standard.
“ISO Star-Line” FEATURESThese Australian designed and manufactured SouthernCross “Star-Line” Motorpumps are readily available in afull range of sizes, backed not only by an Australia wideservice and spare parts network, but with an extensivegroup of international stock and service centres.
“STAR-LINE”CENTRIFUGALMOTORPUMPS
PUMP SELECTION GUIDE
…setting the standardfor pump performance
and quality…
…setting the standardfor pump performance
and quality…
M3/HR 10 20 30 50 100 150 250 500
IGPM 50 100 150 250 500 1,000 1,500
TO
TAL
HE
AD
IN M
ET
RE
S
L/SEC 3 4 5 6 8 10 20 30 40 50 70 100 150
USGPM 50 100 150 250 500 1,000 1,500
TO
TAL
HE
AD
IN F
EE
T
200
150
100
80
60
50
40
30
20
15
600
500
400
300
200
150
100
50
2900R.P.M.(NominalSpeed)
MEA50x32-1602.2-5.5kW MEB
65x50-1604-7.5kW
MED100x80-16011-18.5kW
MEC80x65-1605.5-15kW
MFA50x32-2005.5-11kW
MFB 65x40 -200 7.5-15 kW
MFC80x50-20011-22kW
MFD100x65-20018.5-37kW MFE
125x80- 200 22-45 kW
MGB65x40-25011-30kW
MGC80x50-25022-45kW
MGD100x65-250
30-75kW MGE125x80
-250 45-90 kW
MFF 125x100 -200 30- 75kW
MGF 125x100
-250 55- 110 kW
MHB65x40-31522-45kW
MHC80x50-31530-75kW
MHD100x65-31555-110kW
MHF125x100-315
90-132kW
MHE125x80-31575-132kW
VOLUMETRIC FLOW RATEM3/HR 10 20 30 50 100 150 250 500 1,000
IGPM 50 100 150 250 500 1,000 1,500 2,500
MHE 125x80 -315 11- 18.5
TOTA
L H
EA
D IN
ME
TR
ES
L/SEC 3 4 5 6 8 10 20 30 40 50 70 100 150 200 300
USGPM 50 100 150 250 500 1,000 1,500 2,500 5,000
TOTA
L H
EA
D IN
FE
ET
100
80
60
50
40
30
20
10
8
6
5
400
300
200
100
50
40
30
20
15
1450 R.P.M.(Nominal Speed)
MHH 200 x150-
315 22- 45
kW
MJH 200x 150-400 45-110kW
MKH200x150 -500 90-200 kW
MHJ250x 200 -31537-75kW
MKG 150x 125-500 75-132kW
MKF125x100-500
55-110kW
MEA50x32-160
0.55-0.75kW
MFA50x32-200
0.75—1.5kW
MGB65x40-2501.5-3kW
MHB65x40-3153-5.5kW
MEB65x50-160
0.55-1.1kW
MFB 65x40 -200 1.1-2.2 kW
MEC80x65-160
0.75-1.5kW
MFC80x50-2001.5-3kW
MGC80x50-250
3-5.5kW
MHC80x50-
315
MED100x80-160
1.1-3kW
MFD100x65-2002.2-5.5kW
MGD100x65-250
4-7.5kW
MHD100x65-315 7.5-15kW
MJE125x80-400
15-30kW
MFE 125x80- 200 3-7.5 kW
MGE125x80
-250 5.5-11 kW
MFF 125x 100 -200 4- 7.5 kW
MGF 125x100
-250 7.5-
15
MHF 125x 100 -315 11-22 kW
MJF 125x100
-40022-45kW
MGG 150x125
-25011-22kW
MHG 150x125 -315 18.5-45 kW
MJG150x125-400
37-55kW
PUMP CONSTRUCTION FEATURES…SUPERIOR HYDRAULIC DESIGNFOR GREATER PERFORMANCEAND REDUCED RUNNING COSTS
STANDARD FLANGED, FOOTMOUNTED ELECTRIC MOTOR
RIGID CAST IRON BELLHOUSING ACCURATELYALIGNS MOTOR AND PUMP
MOTOR SHAFT
SEPARATE BACKPLATE FOREASY PUMP SERVICING
STURDY MOUNTING FEET CASTINTEGRAL WITH PUMP BODY
TAPPED CONNECTIONFOR PRESSURE
GAUGE
FLANGES TO AS2129TABLE “E” OPTIONAL
DRILLINGS ON REQUEST
TAPPED AND PLUGGEDVOLUTE DRAIN HOLE
MECHANICALSHAFT SEAL
HEAVY DUTYSTAINLESS STEEL
SHAFT EXTENSION
TAPPED CONNECTIONFOR SUCTION GAUGE
TAPER MOUNTED ANDKEYED IMPELLER FOR
EASY REMOVAL ANDPOSITIVE LOCKING
REUSABLE “O”RING SEAL
BETWEEN PUMPVOLUTE ANDBACKPLATE
top related