1

2

4

5

2

1

3

4

5

2

1

3

6

8

7

9

6

8

7

9

Rolling Sequence

MCO3 Roll-Double PinchThickness range up to 200 mm

Three drive rolls driven by three indipendent hydraulic motors

MCORoll Width Rolling Thickness Pre-bending Thickness Top Roll Diameter Bottom Clamping

Roll Diameter Electric Power

mm mm mm mm mm Hp2533 2550 22 18 330 300 252535 2550 28 25 350 330 302539 2550 38 32 390 370 402545 2550 45 38 450 410 603034 3100 20 16 340 310 253037 3100 25 22 370 350 303041 3100 35 30 410 380 403045 3100 42 35 450 410 603053 3100 54 48 530 490 753060 3100 70 60 600 550 100

For machine specification beyond above list, please contact/send your inquiry to us.

NO Lubricant

Cones

3

MAV3 roll machine with Variable AxisThickness range: 40-500 mmA Machine with Minimum Gauge

Excellent performance on thick plate

For machine specification beyond above list, please contact/send your inquiry to us.

MAVRolls Width Rolling

ThicknessPre-bending

Thickness Top roll Ø Clamp roll Ø Top RollBending Power Power

mm mm mm mm mm Tons HPI-20 2050 mm 55 mm 45 mm 440 mm 390 mm 320 60J-20 2050 mm 68 mm 57 mm 480 mm 440 mm 450 75K-20 2050 mm 82 mm 70 mm 560 mm 480 mm 550 100N-20 2050 mm 105 mm 88 mm 600 mm 520 mm 730 125I-25 2550 mm 50 mm 38 mm 450 mm 400 mm 320 60J-25 2550 mm 60 mm 48 mm 500 mm 450 mm 450 75K-25 2550 mm 72 mm 62 mm 580 mm 500 mm 550 125N-25 2550 mm 56 mm 75 mm 620 mm 540 mm 730 100J-30 3100 mm 85 mm 44 mm 520 mm 460 mm 530 75K-30 3100 mm 68 mm 52 mm 600 mm 520 mm 550 100N-30 3100 mm 85 mm 65 mm 640 mm 560 mm 730 125P-30 3100 mm 90 mm 75 mm 700 mm 600 mm 800 1503072 3100 mm 100 mm 80 mm 720 mm 640 mm 1000 150R-30 3100 mm 130 mm 110 mm 850 mm 760 mm 1350 225U-30 3100 mm 170 mm 145 mm 960 mm 870 mm 1800 280V-30 3100 mm 175 mm 155 mm 1000 mm 800 mm 2000 330W-30 3100 mm 190 mm 170 mm 1050 mm 950 mm 2200 290

NO Lubricant

Cones

4

MCA4 RollsThickness range 4-15 mm

MCARoll width Rolling thickness Pre-bending thickness Top roll diameter Bottom clamping

roll diameter Electric power

mm mm mm mm mm HP2019 2050 9 6 190 180 5.52020 2050 11 8 205 190 102024 2050 16 13 240 230 152520 2.550 8 6 200 180 5.52522 2.550 10 8 220 200 102527 2.550 15 12 270 250 153020 3.100 7 4 200 180 5.53022 3.100 9 6 220 200 103028 3.100 14 10 280 260 153030 3.100 15 12 300 280 15

NO Lubricant

Cones

5

MCB4 RollsThickness range 15-360 mm

Conical shapes

Allows the machine controlled from another place

No any rigid housing

MCBRoll Length Rolling Thickness Pre-bending

Thickness Top Roll Ø Bottom Roll Ø Power

mm mm mm mm mm HPE-20 2050 26 22 320 300 25F-20 2050 32 30 360 340 30G-20 2050 44 40 400 370 40I-20 2050 54 48 440 410 60E-25 2550 24 19 350 330 25F-25 2550 30 28 360 340 30G-25 2550 38 35 420 330 40I-25 2550 48 43 450 430 60E-30 3100 22 18 370 340 25F-30 3100 28 24 400 380 30G-30 3100 36 30 430 400 40I-30 3100 44 38 460 440 60J-30 3100 52 45 500 480 75K-30 3100 60 52 550 530 100N-30 3100 75 65 640 590 125

For machine specification beyond above list, please contact/send your inquiry to us.

New Design of YokeIncrease rigidity and accuracy

NO Lubricant

Cones

6

MCPSection Bending 3 rollBeams up to 1.200 mm highPipes up to 800 mm diameterFlange up to 600 x 200 mm on edge

Hydraulic Traction SupportFor H - IPE - UPN beams

MCP

9 11 14 18 20 24a = Universal Rolls; b = Special Rolls; c = special equipment(for beams the-hard-way)

a 1 Flat_on edge 80x18 ø800 100x25 ø700 125x32 ø1000 150x40 ø1400 175x45 ø1600 175x40 ø1200

a 2 Flat_on flat 180x20 ø500 200x35 ø600 220x50 ø1000 250x60 ø1400 320x65 ø1600 350x45 ø900

a 3 Square 50 ø500 65 ø680 85 ø1200 105 ø1600 115 ø1500 110 ø1500

a -b 4 Round 60 ø600 75 ø900 90 ø1100 110 ø1200 130 ø1400 125 ø2000

a 5 L_leg out 80x10 ø800 100x12 ø1000 120x15 ø1300 150x16 ø1200 180x18 ø1800 160x20 ø1600

a 6 L_ leg in 80x10 ø700 100x10 ø1000 120x13 ø1100 150x15 ø1500 180x15 ø2000 150x20 ø1600

a 7 T _leg out 80x9 ø700 100x12 ø800 120x15 ø1000 150x16 ø1000 180x18 ø1400 160x20 ø1400

a 8 T _leg in 80x9 ø1300 100x10 ø800 120x13 ø1000 150x15 ø1200 180x15 ø1600 150x20 ø2000

a 9 T_on one side 100x12 ø1000 100x12 ø1000 120x15 ø1000 150x16 ø1000 180x18 ø1400 160x20 ø1500

a 10 Rectangular Hollow Section 100x50x5 120x50x4 150x50x5 180x70x8 200x75x8 220x75x8

a 11 Square Hollow Section 65x6 80x6 100x8 120x10 150x10 150x8

a 12 UPN "C section"_leg out

UPN 140X60 ø600 UPN 180 ø800 UPN 220 ø900 UPN 300 ø1100 UPN 360 ø1300 UPN 360

ø1200

a 13 UPN "C section"_leg in

UPN 140X60 ø800

UPN 180 ø1000 UPN 220ø1100 UPN 300 ø1200 UPN 360 ø1600 UPN 360

ø1400

a 14 IPE_easy way IPE 140 ø600 IPE 180 ø1000 IPE 220 ø1000 IPE 300 ø1100 IPE 360 ø1200 IPE 360 ø1500

a 15 HEA_easy way HEA 100 ø900 HEA 120 ø1000 HEA 150 ø1100 HEA 180 ø1100 HEA 220 ø2500 HEA 240 ø1500

b 16 Tube 96x2 ø1400 141 x 3,4 ø3000

168 x 3,4 ø2500 219 x 2,7 ø3000 273 x 4,2 ø5000 324 x 4,5

ø10000

b 17 Tube 76x6.3 ø700 114 x 6 ø2500 141 x 6 ø2500 168 x 7 ø3000 219 x 8 ø3500 190 ø2500

a - c 18 UPN "C section"_hard way

UPN 65x42 ø4000

UPN 120 ø4500

UPN 160 ø8000 UPN 180 ø8000 UPN 220 ø9000 UPN 200x75

ø11000

a - c 19 IPE_hard way IPE 80 ø1200 IPE 120 ø3000 IPE 150 ø4000 IPE 180 ø5000 IPE 240 ø9000 IPE 200 ø5000

a - c 20 HEA_hard wayMax Section Modulus 18-25 cm³

HEA 100 ø4500 HEA 120 ø3000HEA 160 ø 8000 HEB 140 ø10000

HEA 200 ø9000 HEB 180 ø12000

HEA 180 ø4500

Section modulus W cm3 18-25 40 - 70 80 - 150 120 - 220 240 - 450 180 - 320

Shafts ø mm. 85/85 105 140 / 120 180 / 160 200 / 180 240 / 220

Rolls ø (external) mm. 250 310 390 470 560 550

Electric (50Hz) Power HP 10 15 20 30 40 40

Max Weight Kg. 4500 7000 12000 17000 21000

Oil tank capacity (lt) 160 180 200 450 500

NO Lubricant

7

MCP

26 28 30 32 36a = Universal Rolls; b = Special Rolls; c = special equip-ment

(for beams the-hard-way)

a 1 Flat_on edge 200x60 ø1800 200x60 ø1800 250x60 ø2100 250x80 ø1900 400x80 ø2100

a 2 Flat_on flat 400x80 ø1800 400x80 ø1800 470x80 ø1400 500x90 ø1200 650x100 ø1500

a 3 Square 140 ø1900 140 ø1900 160 ø2200 180 ø2200 240 ø2200

a -b 4 Round 150 ø1500 150 ø1500 180 ø2000 200 ø2200 260 ø1800

a 5 L_leg out 200x25 ø2500 200x25 ø2500 200x28 ø2000 200x28 ø1600 200x28 ø1600

a 6 L_ leg in 200x20 ø2000 200x20 ø2000 200x20 ø2000 200x28 ø1800 200x28 ø1800

a 7 T _leg out 200x25 ø2500 200x25 ø2500 200x28 ø1800 200x28 ø1600 200x28 ø1600

a 8 T _leg in 200x20 ø2000 200x20 ø2000 200x20 ø2800 200x28 ø2500 200x28 ø2500

a 9 T_on one side 200x25 ø2000 200x25 ø2000 200x28 ø2800 200x28 ø1600 200x28 ø1600

a 10Rectangular Hollow Section

230x100x10 230x100x10 250x125x12 250x125x12 420x200x12

a 11 Square Hol-low Section 180x12 180x12 220x13 225x12 400x16

a 12UPN "C section"_leg out

UPN 475 ø1500 UPN 475 ø1500 UPN 500 ø2000 UPN550 ø2200 UPN 1000 ø4000

a 13 UPN "C sec-tion"_leg in UPN 475 ø2500 UPN 475 ø2500 UPN 500 ø2000 UPN 550 ø3000 UPN 1000 ø4000

a 14 IPE_easy way IPE450 ø1500 IPE450 ø1500 IPE 500 ø2500 IPE 600 ø2200 IPE1000 ø5000

a 15 HEA_easy way HEA 280 ø3000 HEA 280 ø3000 HEA 400 ø3500 HEA 450 ø3500 HEA 1000 ø5000

b 16 Tube 324 x 4,5 ø10000 324 x 4,5 ø10000 - 406x6,3 ø15000 558x12,7 ø10000

b 17 Tube 273 x 9,3 ø15000 273 x 9,3 ø15000 368x8 ø15000 356x9,5 ø10000 508x15 ø10000

a - c 18UPN "C sec-tion"_hard way

UPN 260 ø15000 UPN 260 ø15000 UPN 280 ø16000 UPN 300 ø20000 UPN 400 ø38000

a - c 19 IPE_hard way IPE 270 ø11000 IPE 270 ø11000 IPE 300 ø12000 IPE 360 ø20000 IPE 600 ø32000

a - c 20 HEA_hard way

HEA 240 ø20000HEB 200 ø10000

HEA 240 ø20000 HEB 200 ø10000

HEA 260 ø12000 HEB 240 ø12000

HEA 300 ø20000 HEB 260 ø12000

HEA 550 ø36000 HEB 500 ø24000

Section modulus W cm3 350 - 600 300 - 600 350 - 1000 600 - 1300 1000 - 4300

Shafts ø mm. 260 / 260 280 / 260 300 / 280 320 / 320 360 / 360

Rolls ø (external) mm. 680 660 720 800 800

Electric (50Hz) Power HP 60 60 100 100 125

Max Weight Kg. 25000 32000 32000 44000 55000

Oil tank capacity (lt) 500 600 600 700 900

NO Lubricant

8

A complete system available to youRequiring only ONE operator!

DAVI since 1966 produces high quality plate rolls (3 and 4 rolls type) up to 400 mm thickness and angle rolls machines for flanges and sections, all 100% made in Italy. An excellent “customer care” service is offered to answer the customer needs, anywhere in the world, quickly and efficiently, with its professional service team, dedicated exclusively to customer service.

kls/

p&a.

497/

2k/D

V.6/

ban.

uni/1

1.17

Tel. : (021) 582-8282BALITel. : (0361) 907-9320BALIKPAPANTel. : (0542) 763-698BANDUNGTel. : (022) 421-3939BATAMTel. : (0778) 473-566

BONTANGTel. : 0811 581 4591CIKARANGTel. : (021) 8984-5858CILEGONTel. : (0254) 387-987LAMPUNGTel. : (0721) 474-480MAKASARTel. : (0882) 2736-5749

TANJUNG MORAWATel. : (061) 794-1328YOGYAKARTATel. : (0274) 642-9097,98,99

MEDANTel. : (061) 452-7269PALEMBANGTel. : (0711) 571-7788 SAMARINDATel. : (0541) 410-0637SEMARANGTel. : (024) 355-8788SURABAYA (Juanda)Tel. : (031) 868-8328

Kawan Lama Industrial SolutionBALIKPAPANTel. : (0542) 870-3946PEKANBARUTel. : (0761) 282-98 KL

S/P&

A.53

9/2k

/kls.

Davi/

Fau.U

NI/0

6.19