step 1 - installing tstatspec download the tstatspec ... 1 - installing tstatspec download the...
Post on 20-Apr-2018
217 Views
Preview:
TRANSCRIPT
Step 1 - Installing TStatSpec
Download the TStatSpec software from customer.honeywell.com. The files will need to be extracted in a new folder.
Check "The program worked in earlier versions of Windows but won't install or run now" then click Next
If User Account Control comes up, allow the program to run. At this point, follow the prompts to install TStatSpec and the PL-2303 driver, it may take some time for this to run completely. Give the installer time to run completely. If and error comes up, click OK to close it.
After your computer restarts there will be a shortcut to TStatSpec on the desktop. Right click the icon and select Properties.
Click the Compatibility tab, then check "Run this program in compatibility mode for" and select " Windows XP (Service Pack 3)" from the drop down menu and click OK.
Step 2 - Installing the correct USB-TIM driver
Download and run the USB-TIM Driver Installation found on customer.honeywell.com
After the driver is installed connect the USB-TIM cable to a USB port. Click the Windows icon in the corner of your screen and type "Device Manager" then click to open Device Manager.
Click to expand the "Ports (COM & LPT)" then right click "Prolific USB-to-Serial Comm Port" and click Properties
Click the Driver tab, if the driver version is 3.4.25.218 the correct driver is installed, click OK and proceed to Step 3. If any other driver version is listed, click "Update Driver..."
top related