tapestry zipper bags - embroidery online
Post on 02-Jun-2022
1 Views
Preview:
TRANSCRIPT
11
XDesigns
Fits hoop sizes 5” x 7” and larger3Designs
Fits hoop sizes 6” x 10” and larger
TAPESTRY ZIPPER BAGS
Collection No. 128693 Designs
Project instructions included
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork. Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
2It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
Isacord Thread Colors0670 Cream 0713 Lemon 1102 Pumpkin 1800 Wildfire 2508 Hot Pink 2640 Frosted Plum 2655 Aura 2912 Sugar Plum 2953 Concord Fog 4620 Jade 5326 Evergreen 5722 Green Grass 5912 Erin Green
THREAD LIST
*Project instructions included after design list
3
DESIGNS
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork. Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
Size Inches: Size mm: Stitch Count:
n 1. Zipper Placement Guide .................................. 2912n 2. Zipper Tackdown ............................................. 2912n 3. Front Panels Tackdown ................................... 2912n 4. Medium Purple Detail ...................................... 2912n 5. Dark Purple Detail ........................................... 2953n 6. Pale Purple Detail ............................................ 2655n 7. Light Purple Detail ........................................... 2640n 8. Inner Panels Tackdown ................................... 2912n 9. Backing Tackdown ........................................... 2912n 10. Inner Lining Tackdown ..................................... 2912
12869-01 Tapestry Zipper Bag 1
179.5 X 136.8 mm7.06 X 5.39 in. 26845 St.S199.0 X 151.9 mm7.83 X 5.98 in. 31261 St.L
Size Inches: Size mm: Stitch Count:
n 1. Zipper Placement Guide .................................. 5722n 2. Zipper Tackdown ............................................. 5722n 3. Front Panels Tackdown ................................... 5722n 4. Dark Green Detail ............................................ 5326n 5. Medium Green Detail ...................................... 5722n 6. Light Green Detail ........................................... 5912nn 7. Cream Detail ................................................... 0670n 8. Inner Panels Tackdown ................................... 5722n 9. Backing Tackdown ........................................... 5722n 10. Inner Lining Tackdown ..................................... 5722
12869-02 Tapestry Zipper Bag 2
182.7 X 136.8 mm7.19 X 5.39 in. 35651 St.197.2 X 152.0 mm7.76 X 5.99 in. 44393 St.
SL
*Fabric Required
*Fabric Required
4
DESIGNS
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork. Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
Size Inches: Size mm: Stitch Count:
n 1. Zipper Placement Guide .................................. 4620n 2. Zipper Tackdown ............................................. 4620n 3. Front Panels Tackdown ................................... 4620n 4. Yellow Detail .................................................... 0713nn 5. Cream Detail ................................................... 0670n 6. Dark Purple Detail ........................................... 2953n 7. Dark Green Detail ............................................ 5722n 8. Orange Detail ...................................................1102n 9. Light Purple Detail ........................................... 2912n 10. Red Detail ........................................................ 1800n 11. Pink Detail ....................................................... 2508n 12. Inner Panels Tackdown ................................... 4620n 13. Backing Tackdown ........................................... 4620n 14. Inner Lining Tackdown ..................................... 4620
12869-03 Tapestry Zipper Bag 3
210.0 X 136.6 mm8.27 X 5.38 in. 25578 St.S231.5 X 151.8 mm9.11 X 5.98 in. 30599 St.L
*Fabric Required
5It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
COLLECTION SUPPLIES
Stabilizers
• See chart for fabric requirements• Note: Fabric sizes are estimates and may result in overage.
• OESD Medium Weight TearAway• OESD Fusible Woven
• As per thread chart • OESD Bobbin Thread
Fabrics/Textiles
Notions & Tools• OESD Expert Embroidery Tape TearAway• OESD Expert Point and Press Tool• OESD Perfect Embroidery Press Cloth• 10”-14” Polyester or nylon zipper at least 2” larger than opening (NO metal zippers)
Isacord Thread Colors
• Embroidery Hoop to accommodate: Largest Design 6” X 10”• Finished project size: Size see chart
Information
6It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
Front Panel Top
Cut 1 of outer fabric and 1 of lining
Front Panel Bottom
Cut 1 of outer fabric and 1 of lining
Back
Cut 1 of outer fabric and 1 of lining
SUMMARY
8.5 x 3.5
Cut Fusible Woven 8.5 x 1.75
10 x 10
Cut Fusible Woven 10 x 5
10 x 7
Cut Fusible Woven 10 x 7
7.5 x 3
Cut Fusible Woven7.5 x 1.5
9 x 9.5
Cut Fusible Woven9 x 4.75
9 x 6
Cut Fusible Woven9 x 6
Large Bag
Small Bag
Plastic/Nylon Zipper: at least 10” Long
Teal Bag
Front Panel Top
Cut 1 of outer fabric and 1 of lining
Front Panel Bottom
Cut 1 of outer fabric and 1 of lining
Back
Cut 1 of outer fabric and 1 of lining
8.5 x 7
Cut Fusible Woven8.5 x 3.5
8.5 x 7
Cut Fusible Woven8.5 x 3.5
8.5 x 8
Cut Fusible Woven8.5 x 8
7.5 x 6
Cut Fusible Woven7.5 x 3
7.5 x 6
Cut Fusible Woven7.5 x 3
7.5 x 7
Cut Fusible Woven7.5 x 7
Green Bag
Plastic/Nylon Zipper: at least 14” Long
Large Bag
Small Bag
Plastic/Nylon Zipper: at least 10” Long
Plastic/Nylon Zipper: at least 14” Long
7It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
Front Panel Top
Cut 1 of outer fabric and 1 of lining
Front Panel Bottom
Cut 1 of outer fabric and 1 of lining
Back
Cut 1 of outer fabric and 1 of lining
SUMMARY
8.5 x 3.5
Cut Fusible Woven 8.5 x 1.75
8.5 x 10
Cut Fusible Woven8.5 x 5
8.5 x 7
Cut Fusible Woven8.5 x 7
7.5 x 3
Cut Fusible Woven7.5 x 1.5
7.5 x 8.5
Cut Fusible Woven7.5 x 4.25
7.5 x 6
Cut Fusible Woven7.5 x 6
Purple Bag
Large Bag
Small Bag
Plastic/Nylon Zipper: at least 10” Long
Plastic/Nylon Zipper: at least 14” Long
*The In-The-Hoop instructions included in the design pack are general instructions for the collection. For demonstration purposes, a sample design that best represents the entire collection is shown. Fabric and thread requirements will vary by design, but the general
technique will be the same.
8It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
STEP X• Design used for this project is 12869-03L.• Hoop 1 piece of OESD Medium Weight TearAway Stabilizer.• Stitch Machine Step 1, Zipper Placement Guide.
STEP X• Re-fold outer fabrics and press.
STEP X• Press Bottom Front, Top Front, Top Front Lining and Bottom Front
Lining in 1/2 wrong sides together, lengthwise. • OESD Fusible Woven is applied only to the outer fabrics, not the
lining.• Open outer fabrics and press OESD Fusible Woven to one half of the
wrong side of the fabric, lining up the Fusible Woven with the fold of the fabric.
• Press a whole piece of Fusible Woven to the wrong side of the Back fabric.
STEP 3
STEP 2
STEP 1
EMBROIDERY
9It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
STEP X• Remove the hoop from the machine, but DO NOT remove the
project from the hoop.• Place the folded edges of the Top and Bottom Front Panels next to
the teeth of the zipper.• Note: The fabric side with the Fusible Woven attached needs to be
on top to support the embroidery stitches.• Cover the Zipper Tackdown line, but not the zipper teeth.• Tape to hold.
STEP X• Remove the hoop from the machine, but DO NOT remove the project from the hoop.• Place the zipper, right side up, within the Placement Guide and tape to hold in place.• Metal ends must be outside of the stitching area.• Return the hoop to the machine.• Stitch Machine Step 2, Zipper Tackdown.
STEP 5
STEP 4
EMBROIDERY
10It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
STEP X• Remove the hoop from the machine, but DO NOT remove the
project from the hoop.• Turn hoop over and lay face down on a flat surface.• On the back of the hoop, locate the Zipper Tackdown lines.• Place the folded edges of the Top and Bottom Lining fabric slightly
inside the Zipper Tackdown.• Gently secure with tape. (Do not press too hard!)
STEP X• Follow the color chart and stitch the remaining embroidery details,
machine steps 4-11.
STEP X• Return the hoop to the machine.• Stitch Machine Step 3, Front Panels Tackdown.
STEP 8
STEP 7
STEP 6
BACK OF HOOP
EMBROIDERY
11It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
STEP X• Position the back fabric, right side down over the front of the zipper
pouch completely covering the stitched pieces. (Fusible Woven prepped fabric).
STEP X• Note: This is the most important step in the whole project!• Without it, you will need a seam ripper!• Unzip the zipper halfway!• Not all the way, just HALFWAY!
STEP X• Return the hoop to the machine.• Stitch Machine Step 12, Inner Panels Tackdown.
STEP 11
STEP 10
STEP 9
BACK OF HOOP
EMBROIDERY
12It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
STEP X• Return the hoop to the machine.• Stitch Machine Step 14, Inner Lining Tackdown.• Note the “neck” opening in the top for turning the back lining.
STEP X• Remove the hoop from the machine, but DO NOT remove the
project from the hoop.• Turn the hoop over and position the back lining, face down on the
back of the hoop.• Tape fabric to hold it in place.
STEP X• Stitch Machine Step 13, Backing Tackdown.
STEP 14
STEP 13
STEP 12
EMBROIDERY
BACK OF HOOP
13It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
STEP X• Tuck the “neck” area to the inside of the bag, press.• Close the opening by hand stitching. • Turn the pouch right side out, through the zipper. Use the Expert
Point and Press Tool to help push out the corners and sides. • Press with a dry iron, zipper down, on Perfect Embroidery Press
Cloth.
STEP X• Turn the pouch inside out to show the right side of the lining fabric.• Use the large end of the Expert Point and Press tool to push out the
corners and edges.• Remove the excess stabilizer from the zipper area.• Unzip the zipper completely.
STEP X• The stitching is now complete.• Remove the project from the hoop and trim approximately 1/4” from
the outermost stitching line as shown. • DO NOT cut off the “neck” opening at the top. Trim across the
opening above the vertical lines of stitching. • Clip each inner corner to, but not through, the stitches in the corner.
STEP 17
STEP 16
STEP 15
EMBROIDERY
top related