the name in aluminium casting the liquid aluminium is then cast into ingots, billets, sheets or...
Post on 16-Apr-2019
218 Views
Preview:
TRANSCRIPT
THE NAME IN ALUMINIUM
CONTENTS
01
OU
r S
TO
ry
HISTORY
Founded in 1965, TC Aluminium has played a pivotal role in transforming Singapore into
a metropolitan city. With the increased demand for aluminium, the business rapidly expanded
into the Southeast Asian market in 1975.
OUR STORY
As Singapore’s largest and leading aluminium supplier, TC Aluminium prides ourselves
on our exceptional quality, uncompromising integrity and service excellence. The
strong bonds we’ve forged with our suppliers ensure the standards of our products
are maintained at the highest levels and production lead times are reduced.
We continually push the boundaries of technology with new and improved systems, as well as
develop our working environment with a single aim in mind – to efficiently produce quality
products for all of our customers.
Over the years, we have grown from strength to strength. While we started off supporting
companies in the Engineering, and Building and Construction industries, we now supply our
premium products to those in the Marine, Offshore, Oil and Gas, Aerospace, Solar Energy,
Green Building and Architecture industries as well. We have expanded our presence beyond
Southeast Asian shores to countries including Australia, Bangladesh, China and Maldives.
COMPANY VALUES
Quality. Integrity. Excellence.
That is the foundation upon which TC Aluminium is built on. Our sole objective is to ensure
we provide the best solutions and supply quality aluminium to our customers, with integrity.
4 CASTINGThe liquid Aluminium is then cast into ingots, billets, sheets or foundry alloys.
6 PACKINGThe aluminium extrusions and sheets are then packed with precision into pallets before getting shipped out from factories.
7 SHIPPINGThe packed aluminium products are then shipped via road or sea, from the warehouses to our customers. Ready to be fabricated into many useful products.
1 BAUXITE MININGThe first step of aluminium production begins with the mining of bauxite, a clay like soil typically found in tropical regions.
2 ALUMINA REFININGBauxite is transported to processing plants where the clay is washed off and bauxite passed through a grinder and dried to a white powder which is reduced to Pure Alumina.
3SMELTINGThe Alumina is passed between a cathode
which is reduced to Pure Aluminium. It is then smelted to form molten Aluminium.
Pure
Alu
min
a
Aluminium E
xtru
sio
n B
illet
s
Aluminium
She
ets
Ingo
ts
8 RECYCLINGAluminium is considered a “Green Metal” because recycling of aluminium requires only 5 percent of the energy used to make aluminium and the ease of recycling. Aluminium can be recycled with 100% efficiency such that none of the qualities are lost.
5 ROLLINGSince aluminium is very ductile. Aluminium Sheets and foils are rolled out from a sheet ingot. They are flattened from about 60mm to as thin as 0.3mm.
5 EXTRUSIONThe ingot or billet is then heated till soft and pressed through a die.
Extruded A
lum
iniu
m
Molten A
lum
iniu
m
recyclability – Aluminium can be
recycled with 100%efficiency with only
5% of the energy.
“
”
PrOCESS OF MAKING ALUMINIUM
As one of the most abundant metal elements, pure aluminium usually needs to undergo a series of complex production processes
before it is transformed to premium aluminium for commercial use. Leveraging cutting edge technology, aluminium making process
is continually refined to maintain high standards of quality and efficiency, and production expertise has been honed into a fine craft
over the years. Here is an inside look into the highly sophisticated process:
03
Pr
OC
ESS
OF
MA
KIN
G A
LUM
IMIU
M
4 CASTINGThe liquid Aluminium is then cast into ingots, billets, sheets or foundry alloys.
6 PACKINGThe aluminium extrusions and sheets are then packed with precision into pallets before getting shipped out from factories.
7 SHIPPINGThe packed aluminium products are then shipped via road or sea, from the warehouses to our customers. Ready to be fabricated into many useful products.
1 BAUXITE MININGThe first step of aluminium production begins with the mining of bauxite, a clay like soil typically found in tropical regions.
2 ALUMINA REFININGBauxite is transported to processing plants where the clay is washed off and bauxite passed through a grinder and dried to a white powder which is reduced to Pure Alumina.
3SMELTINGThe Alumina is passed between a cathode
which is reduced to Pure Aluminium. It is then smelted to form molten Aluminium.
Pure
Alu
min
a
Aluminium E
xtru
sio
n B
illet
s
Aluminium
She
ets
Ingo
ts
8 RECYCLINGAluminium is considered a “Green Metal” because recycling of aluminium requires only 5 percent of the energy used to make aluminium and the ease of recycling. Aluminium can be recycled with 100% efficiency such that none of the qualities are lost.
5 ROLLINGSince aluminium is very ductile. Aluminium Sheets and foils are rolled out from a sheet ingot. They are flattened from about 60mm to as thin as 0.3mm.
5 EXTRUSIONThe ingot or billet is then heated till soft and pressed through a die.
Extruded A
lum
iniu
m
Molten A
lum
iniu
m
04
Pr
OC
ESS
OF
MA
KIN
G A
LUM
IMIU
M
ALUMINIUM GRADES
AND APPLICATION
AL
UM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
ALLOy AA 1100
Aluminium Alloy 1100 has a minimum of 99% purity and is commercially considered pure aluminium. Soft and ductile with excellent
workability, it’s ideal for applications with difficult forming. It can be welded using any method, but it is not heat-treatable. With its
excellent resistance to corrosion, it is commonly used in the chemical and food processing industries.
CHArACTErISTICS
WELDABILITY FABRICATION
GAS ARC BRAZABILITY RESISTANCE MACHINABILITY WORKABILITY
EXCELLENT EXCELLENT EXCELLENT EXCELLENT POOrCOLD:
VEry GOOD
TEMPEr AVAILABLE
SHEETS & PLATES H14
CHEMICAL COMPOSITION
SILICON (Si)
IRON (Fe)
COPPER (Cu)
MAGANESE (Mn)
MAGANESE (Mg)
CHROMIUM (Cr)
ZINC (Zn)
TITANIUM (Ti)
OTHERS (Each)
OTHERS (Total)
ALUMINIUM (Al)
1.00 0.05-0.20 0.00-0.05 - - 0.00-0.10 - 0.00-0.05 0.00-0.15 99.00
MECHANICAL PrOPErTIES
TEMPERTENSILE STRENGTH
(MPa)
PROOF STRESS ELONGATION (At 50mm)Min. (MPa)
H14 110-145 95 5 MIN %
PHySICAL PrOPErTIES
DENSITYMELTING
POINTTHERMAL
EXPANSIONMODULUS OF
ELASTICITYTHERMAL
CONDUCTIVITYELECTRICAL RESISTIVITY
2.71 g/cm3 643-657°C 23.6 x 10-6 / K 68 GPa 222 W/m.K 0.292 x 10-6 Ω.m
GrADE APPLICATION• Chemical Equipment
• Drawn and Spun Parts
• General Fabrication
• Sheet Metal Work
• General Sheet Metal Works
07
ALU
MIN
IUM
Gr
AD
ES
AN
D A
PP
LIC
AT
ION
ALLOy AA 3003
Aluminium Alloy 3003 is a medium strength alloy with very good resistance to atmospheric corrosion and very good weldability, as
well as good cold formability. It has better mechanical properties than the 1000 series alloys, especially at elevated temperatures.
CHArACTErISTICS
WELDABILITY FABRICATION
GAS ARC BRAZABILITY RESISTANCE SOLDERABILITY MACHINABILITY WORKABILITY
VEry GOOD VEry GOOD VEry GOOD GOOD VEry GOOD POOr COLD: VEry GOOD
TEMPEr AVAILABLE
SHEETS & PLATES H14
CHEMICAL COMPOSITION
SILICON (Si)
IRON (Fe)
MAGNESIUM (Mg)
HYDROGEN (H)
ZIRCONIUM (Zr)
COBALT (Co)
OTHERS (Each)
OTHERS (Total)
ALUMINIUM (Al)
0.00-0.60 1.00-1.50 0.00-0.70 0.00-0.10 0.05-0.20 0.00-0.05 0.00-0.15 rEMAINDEr
MECHANICAL PrOPErTIES
TEMPERTENSILE STRENGTH
(MPa)
PROOF STRESS ELONGATION (At 50mm)Min. (MPa)
H14 95-135 115 8 MIN %
PHySICAL PrOPErTIES
DENSITYMELTING
POINTTHERMAL
EXPANSIONMODULUS OF
ELASTICITYTHERMAL
CONDUCTIVITYELECTRICAL RESISTIVITY
2.73 g/cm3 655°C 23.1 x 10-6 / K 69.5 GPa 190 W/m.K 0.034 x 10-6 Ω.m
GrADE APPLICATION• Architectural
• Drawn and Spun Parts
• General Fabrication
• Pressure Vessels
• Sheet Metal Work
• Storage Tanks
08
ALU
MIN
IUM
Gr
AD
ES
AN
D A
PP
LIC
AT
ION
ALLOy AA 5052
Out of the non-heat-treatable grades, Alloy AA 5052 is one of the higher strength alloys with a fatigue strength that’s greater than
most other aluminium grades. It has good resistance against marine and industrial atmospheres, as well as salt water corrosion. With
its excellent workability, it can easily be drawn or formed into intricate shapes.
CHArACTErISTICS
WELDABILITY FABRICATION
GAS ARC BRAZABILITY RESISTANCE SOLDERABILITY MACHINABILITY WORKABILITY
GOOD VEry GOOD ACCEPTABLE VEry GOOD NOT rECOMMENDED ACCEPTABLE COLD:
VEry GOOD
TEMPEr AVAILABLE
SHEETS & PLATES H32
CHEMICAL COMPOSITION
SILICON (Si)
IRON (Fe)
COPPER (Cu)
MAGANESE (Mn)
MAGNESIUM (Mg)
CHROMIUM (Cr)
ZINC (Zn)
TITANIUM (Ti)
OTHERS (Each)
OTHERS (Total)
ALUMINIUM (Al)
0.00-0.25 0.00-0.40 0.00-0.10 0.00-0.10 0.00-0.10 2.20-2.80 0.15-0.35 - 0.00-0.05 0.00-0.15 rEMAINDEr
MECHANICAL PrOPErTIES
TEMPERTHICKNESS
(mm)TENSILE STRENGTH
(MPa)
PROOF STRESS HARDNESS BRINELL (HB)Min. (MPa)
H32 0.20-6.00 210-260 130 61
PHySICAL PrOPErTIES
DENSITY MELTING POINT
THERMAL EXPANSION
MODULUS OF ELASTICITY
THERMAL CONDUCTIVITY
ELECTRICAL RESISTIVITY
2.68 g/cm3 605°C 23.7 x 10-6 / K 70 GPa 138 W/m.K 0.0495 x 10-6 Ω.m
GrADE APPLICATION• Aircraft (Structure/Tube)
• Boat Building
• Cooking Utensils
• General Fabrication
• Marine Applications
• Pressure Vessels
• Sheet Metal Work
• Trucks Frames & Trailers
09
ALU
MIN
IUM
Gr
AD
ES
AN
D A
PP
LIC
AT
ION
ALLOy AA 5083
Aluminium AA 5083 is known for its exceptional performance in extreme environments. Highly resistant to both seawater and
industrial chemical environments, Alloy AA 5083 also retains exceptional strength after welding. Out of the non-heat-treatable
grades, 5083 is one of the higher strength alloys. It is not recommended for use in temperatures in excess of 65°C.
CHArACTErISTICS
WELDABILITY FABRICATION
GAS ARC BRAZABILITY RESISTANCE SOLDERABILITY MACHINABILITY WORKABILITY
AVErAGE EXCELLENT POOr EXCELLENT POOr POOr COLD: VEry GOOD
TEMPEr AVAILABLE
SHEETS & PLATES H111 , H112 , H116 and H321
CHEMICAL COMPOSITION
SILICON (Si)
IRON (Fe)
COPPER (Cu)
MAGANESE (Mn)
MAGNESIUM (Mg)
CHROMIUM (Cr)
ZINC (Zn)
TITANIUM (Ti)
OTHERS (Each)
OTHERS (Total)
ALUMINIUM (Al)
0.00-0.40 0.00-0.40 0.00-0.10 0.40-1.00 4.00-4.90 0.05-0.25 0.00-0.10 0.05-0.25 0.00-0.05 0.00-0.15 rEMAINDEr
MECHANICAL PrOPErTIES
TEMPERTHICKNESS
(mm)TENSILE STRENGTH
(MPa)
PROOF STRESS HARDNESS BRINELL (HB)Min. (MPa)
H 1 1 1 0.20-6.30 275-350 125 75
H32 0.20-6.00 304-380 21 5 89
PHySICAL PrOPErTIES
DENSITYMELTING
POINTTHERMAL
EXPANSIONMODULUS OF
ELASTICITYTHERMAL
CONDUCTIVITYELECTRICAL RESISTIVITY
2.65 g/cm3 570°C 25 x 10-6 / K 72 GPa 121 W/m.K 0.058 x 10-6 Ω.m
GrADE APPLICATION• Ship Building
• rail Cars
• Vehicle Bodies
• Tip Truck Bodies
• Mine Ships and Cages
• Pressure Vessels
10A
LUM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
ALLOy AA 6061
The most versatile of the heat-treatable aluminium alloys, Alloy AA 6061 preserves most of the good qualities of aluminium. It is a
medium strength structural alloy. This grade has a great range of mechanical properties and corrosion resistance. It can be fabricated
with most of the commonly used techniques and has good workability in the annealed conditions. It can be welded by all methods and
furnace brazed. Because of this, it’s widely used in a wide range of products and applications where appearance and better corrosion
resistance with good strength are required.
CHArACTErISTICS
WELDING Alloy 6061 is readily welded by the MIG and TIG processes. recommended filler alloy is 5356. Alloy 4043 may also be
used for general welding except when welding 6061 to aluminium-magnesium alloys.
RIVERTS Alloy 6053-T61
MACHINING readily machined in all tempers given
FORMING All tempers may be formed, the softer tempers accepting more severe forming
CORROSION Excellent resistance to the atmosphere, fresh waters and many soils. Fair resistance to seawater. Good general
corrosion resistance in structural application.
TEMPEr AVAILABLE
EXTRUSIONS T6
SHEETS & PLATES H32
CHEMICAL COMPOSITION
SILICON (Si)
IRON (Fe)
COPPER (Cu)
MAGANESE (Mn)
MAGNESIUM (Mg)
CHROMIUM (Cr)
ZINC (Zn)
TITANIUM (Ti)
OTHERS (Each)
OTHERS (Total)
ALUMINIUM (Al)
0.40-0.80 0.00-0.70 0.15-0.40 0.00-0.15 0.80-1.20 0.04-0.35 0.00-0.25 0.00-0.15 0.00-0.05 0.00-0.15 rEMAINDEr
MECHANICAL PrOPErTIES
TEMPERTHICKNESS
(mm)ULTIMATE STRENGTH
Min.
0.2% STRESSHARDNESS BRINELL
(HB)HARDNESS BRINELL
(HB)Min. (MPa) Max. (MPa)
T4 ALL 180 1 10 - 16 75
T6UP TO 6.3 260 240 - 8 105
OVEr 6.3 260 240 - 10 -
11A
LUM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
PHySICAL PrOPErTIES
DENSITYMELTING
POINTCOEFFICIENT OF LINEAR EXPANSION
BETWEEN 20 - 100ºCSPECIFIC HEAT
BETWEEN 20 - 100ºC
2.71 g/cm3 580-650°C 24 x 10-6 / K 920 J/kg.K
MODULUS OF RIGIDITY
MODULUS OF ELASTICITY
THERMAL CONDUCTIVITY AT 25ºC
ELECTRICAL RESISTIVITY AT 20ºC
69000 N/mm2 26000 N/mm2 1.67 W/cm.K 0.040μΩm
GrADE APPLICATION• Aircraft (Structure/Tube)
• Architectural
• Building Products
• Boat Building
• Chemical Equipment
• Electrical
• Fasteners & Fittings
• General Fabrication
• Marine Applications
• Piping
• recreation Equipment
• Sheet Metal Work
• Storage Tanks
• Structural Applications
• Trucks Frames & Trailers
12A
LUM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
ALLOy AA 6063
Commonly known as an architectural alloy, Alloy AA 6063 provides a good balance of extrudability and mechanical properties. Its
excellent extrudability allows thin-walled hollow shapes, intricate solids, and other shapes that are usually difficult to extrude with a
satisfactory finish, to be produced more easily. It responds well to polishing, chemical brightening, anodising and dyeing. It also has a
high degree of resistance to corrosion.
CHArACTErISTICS
WELDING Alloy 6063 is readily welded by the mig and tig processes. Alloy 5356 is the recommended filler alloy, particularly
when welding exposed surfaces that will be anodised for decorative purposes. Alloy 4043 may be used in other cases.
RIVERTS Alloy 6053-T61
MACHINING readily machined in all tempers given
FORMING All tempers may be formed, the softer tempers accepting more severe forming
CORROSION Excellent resistance to the atmosphere. Particularly suitable for anodising for architectural applications
TEMPEr AVAILABLE
EXTRUSIONS T4, T5, T6
CHEMICAL COMPOSITION
SILICON (Si)
IRON (Fe)
COPPER (Cu)
MAGANESE (Mn)
MAGNESIUM (Mg)
CHROMIUM (Cr)
ZINC (Zn)
TITANIUM (Ti)
OTHERS (Each)
OTHERS (Total)
ALUMINIUM (Al)
0.20-0.60 0.00-0.35 0.00-0.10 0.00-0.10 0.45-0.95 0.00-0.10 0.00-0.10 0.00-0.10 0.00-0.05 0.00-0.15 rEMAINDEr
MECHANICAL PrOPErTIES
TEMPERTHICKNESS
(mm)ULTIMATE STRENGTH
Min.
0.2% STRESSHARDNESS BRINELL
(HB)HARDNESS BRINELL
(HB)Min. (MPa) Max. (MPa)
T4UP TO 12.50 115 60 - 12 40
12.50-25.00 110 55 - 12 -
T5UP TO 12.50 150 110 - 8 60
12.50-25.00 145 105 - 8 -
T6UP TO 12.50 205 170 - 8 80
12.50-5.00 205 170 - 10 -
13A
LUM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
PHySICAL PrOPErTIES
DENSITYMELTING
POINTCOEFFICIENT OF LINEAR EXPANSION
BETWEEN 20 - 100ºCSPECIFIC HEAT
BETWEEN 20 - 100ºC
2.71 g/cm3 615-655°C 23 x 10-6 / K 879 J/kg.K
MODULUS OF ELASTICITY
THERMAL CONDUCTIVITY AT 25ºC
ELECTRICAL RESISTIVITY AT 20ºC
69 x 103 MPa 202 W/cm.K 0.033μΩm
GrADE APPLICATION• Architectural
• Building Products
• Electrical
• Marine Applications
• Piping
• recreation Equipment
• Storage Tanks
• Trucks Frames & Trailers
14A
LUM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
PrODUCT DATA FINISH & TEMPEr
STANDARD FINISH
• Mill Finish
Natural aluminium finish off the extrusion press.
• Natural Anodised Finish
Aluminium is a corrosion resistant metal due to the film of aluminium oxide that forms naturally on its surface.
By anodising aluminium using an electro-chemical process that thickens the natural oxide film on the aluminium, the resulting
anodised aluminium surfaces become extremely hard, and are corrosion and wear resistant
The natural anodised finish conforms to BS EN12373-1 and is available in nominal film thickness of 6, 10, 15, 20 and 25 microns.
The recommended film thickness is 10 microns and 25 microns for normal and corrosive atmospheric conditions, respectively.
COLOURED ANODISED FINISH
Aluminium extrusions can be treated in durable inorganic colours to yield a finish which is permanent, lightfast, resistant to abrasion
and corrosion, and unchanging in colour intensity. The finish available in bronze and black anodise.
In the colour process, inorganic metal particles are deposited electrolytically in the pores of a clear anodic film. Electrolytic
deposition results in the colour particles being fixed at the very base of the pores, allowing virtually the full thickness of the anodic film
to protect them.
The extrusion is sealed in boiling deionised water, which closes off the pores in the anodic film and permanently seals in the
colour particles.
There are five colours available: Light, Medium Light, Medium, Dark Bronze and Black anodise in nominal film thickness of 15, 20
and 25 microns.
15A
LUM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
POWDER COATING AND FLUOROCARBON (PVDF) FINISH
• Powder Coating
Our fully integrated powder coating lines offer additional surface finishing that allow customisation of colours.
We are able to match various colours that are consistent with the rAL International Colour Code Standard.
Powder Coating Process
Through this process, a solid paint - which is grinded into a fine powder - is thinly applied to the workpiece
by electrostatic spray, melted to form a film and then further heated to polymerise and cure the coating.
The powder coating uses 1 coat system; the electrostatic spray gun applies powder paint only once onto
the profile.
• Fluorocarbon (PVDF)
Fluorocarbon coating is another excellent finishing we provide. We highly recommend this finishing as it is:
- Extremely weather resistant against fading and ultraviolet degradation
- Very durable
- Easy to maintain
- Available in a wide range of colours
Fluorocarbon (PVDF) Process:
During this process, a thin layer of wet paint is applied to the workpiece using an electrostatic spray to form a film,
and then further heated to polymerise and cure the coating.
Fluorocarbon (PDVF) uses 2, 3 or 4 coats system; the electrostatic spray gun applies liquid paint two to four times
onto the profile.
WOODGRAIN FINISH
Woodgrain Finish is a revolutionary new design in wood patterns for aluminium surfaces. It enhances your surroundings with
a rich, natural touch of elegance.
Pro-environment, multi-coloured and refined, Woodgrain Finish is a work of art created by electrostatic spray, allowing the one-
time meticulous application of powder paint onto workpieces, resulting in a natural varnished look complemented by an authentic
wood grain feel.
Woodgrain Finish is multidimensional and can be specially designed for both indoor and outdoor use, for recreational or industrial
purposes and much more. It can be used for doors, windows, kitchen cabinets, wardrobes, garden appliances and a wide selection
of architectural and interior designs.
16A
LUM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
TEMPEr DESINATION
EXTRUSIONS
GRADE TEMPER TEMPER DESCRIPTION
AA6063
T4 Solution heat-treated and naturally aged to a substantially stable condition. No artificial ageing required.
T5 Air cooled from the extrusion temperature and artificially aged to improve mechanical properties
T6 Solution heat-treated and then artificially aged. These products normally water quenched at the press.
AA6061 T6 Solution heat-treated and then artificially aged. These products normally water quenched at the press.
SHEETS / PLATES / COILS
GRADE TEMPER TEMPER DESCRIPTION
AA1100 H14 Strain-hardened – ½ hard
AA3003 H14 Strain-hardened – ½ hard
AA5052 H32 Strain-hardened and stabilised – ¼ hard
AA5083
H111 Annealed and slightly strain-hardened during subsequent operations such as stretching or levelling
H112Slightly strain-hardened from working at an elevated temperature from a limited amount of
cold work (mechanical property limits specified)
H116Applies to aluminium-magnesium alloys with a magnesium content of 4% or more and for
which mechanical property limits and exfoliation corrosion resistance are specified
H321Strain hardened less than required for a controlled H32 temper (Work hardened then stabilised
by low-temperature heat treatment to quarter hard).
AA6061
T6 Solution heat-treated and then artificially aged. These products normally water quenched at the press.
T651
Solution heat-treated, Stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to
3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled
ring) and then artificially aged. The products receive no further straightening after stretching.17A
LUM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
This page is intentionally left blank.
18A
LUM
INIU
M G
rA
DE
S A
ND
AP
PL
ICA
TIO
N
GE
OM
ET
rIC
SE
CT
ION
GEOMETRIC SECTION
EQUAL ANGLE
Aluminium Angle is vastly versatile. It is lightweight
and has a good strength-to-weight ratio, which
is why it’s commonly used for vehicle bodies,
buildings, aerospace, general fabrications, frame
buildings, shop fittings and architectural purposes.
The section can be drilled and cut easily. It can be
welded with the correct equipment and training.
Corrosion resistance can be improved with
anodising or powder coating.
Ar
A
T
21
EQU
AL
AN
GL
E
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
EQUAL ANGLE continued
SECTION NO. A (mm) T (mm) R (mm) WEIGHT (kg/m)
EA0001 9.50 1.00 - 0.050
EA0002 9.53 1.50 - 0.071
EA0003 12.70 1.00 - 0.066
EA0004 12.70 1.50 - 0.097
EA0005 12.70 2.00 - 0.127
EA0006 12.70 2.90 - 0.177
EA0007 15.88 2.00 - 0.161
EA0008 15.88 2.80 - 0.220
EA0009 15.90 1.00 - 0.083
EA0010 19.05 1.00 - 0.101
EA0011 19.05 1.50 - 0.149
EA0012 19.05 2.00 - 0.196
EA0013 19.05 2.80 - 0.268
EA0014 25.40 0.80 - 0.108
EA0015 25.40 1.50 - 0.200
EA0016 25.40 2.00 - 0.264
EA0017 25.40 2.50 - 0.327
EA0018 25.40 2.80 - 0.364
EA0019 25.40 4.50 - 0.563
EA0020 25.40 5.90 - 0.718
EA0021 25.40 8.00 - 0.908
EA0022 30.00 2.00 - 0.314
EA0023 31.75 1.00 - 0.169
EA0024 31.75 2.90 - 0.476
EA0025 31.75 4.50 - 0.720
EA0026 31.75 6.00 - 0.935
EA0027 32.00 1.50 - 0.254
EA0028 38.10 1.00 - 0.203
EA0029 38.10 1.50 - 0.304
EA0030 38.10 2.00 - 0.402
22
EQU
AL
AN
GL
E
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedEQUAL ANGLE
SECTION NO. A (mm) T (mm) R (mm) WEIGHT (kg/m)
EA0031 38.10 2.80 - 0.557
EA0032 38.10 4.50 - 0.874
EA0033 38.10 5.90 - 1.124
EA0034 40.00 8.00 - 1.561
EA0035 44.45 2.90 - 0.676
EA0036 44.45 6.00 - 1.326
EA0037 50.00 10.00 - 2.438
EA0038 50.80 1.20 - 0.327
EA0039 50.80 1.59 - 0.431
EA0040 50.80 2.00 - 0.540
EA0041 50.80 2.80 - 0.750
EA0042 50.80 4.50 - 1.184
EA0043 50.80 5.80 - 1.505
EA0044 50.80 8.00 - 2.030
EA0045 50.80 9.00 - 2.258
EA0046 50.80 9.53 - 2.378
EA0047 50.80 12.00 - 2.917
EA0048 63.50 2.90 - 0.975
EA0049 63.50 4.50 - 1.494
EA0050 63.50 6.00 - 1.938
EA0051 63.50 8.00 - 2.535
EA0052 63.50 9.00 - 2.878
EA0053 63.50 9.53 9.53 3.087
EA0054 63.50 12.00 - 3.743
EA0055 76.20 2.90 - 1.175
EA0056 76.20 4.50 - 1.804
EA0057 76.20 6.00 - 2.380
EA0058 76.20 8.00 - 3.133
EA0059 76.20 9.00 - 3.498
EA0060 76.20 9.53 - 3.690
23
EQU
AL
AN
GL
E
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
endEQUAL ANGLE
SECTION NO. A (mm) T (mm) R (mm) WEIGHT (kg/m)
EA0061 76.20 9.53 9.53 3.743
EA0062 76.20 12.70 - 4.812
EA0063 76.20 12.70 12.70 4.907
EA0064 80.00 12.00 4.00 4.826
EA0065 88.90 6.00 - 2.793
EA0066 100.00 8.00 - 4.163
EA0067 100.00 10.00 - 5.149
EA0068 101.60 3.00 - 1.628
EA0069 101.60 4.50 - 2.423
EA0070 101.60 6.00 - 3.206
EA0071 101.60 6.35 6.35 3.414
EA0072 101.60 9.00 - 4.719
EA0073 101.60 9.52 - 5.011
EA0074 101.60 9.53 9.53 5.059
EA0075 101.60 12.00 - 6.223
EA0076 101.60 12.70 12.70 6.656
EA0077 127.00 9.53 - 6.075
EA0078 127.00 12.00 - 7.877
EA0079 127.00 12.70 - 8.312
EA0080 152.40 6.00 - 4.863
EA0081 152.40 9.53 9.53 7.731
EA0082 152.40 12.70 - 10.062
EA0083 152.40 12.70 12.70 10.156
EQU
AL
AN
GLE
15
24
EQU
AL
AN
GL
E
UNEQUAL ANGLE
Aluminium Angle is hugely versatile. It is light weight and has a good strength to weight ratio thus it is commonly used for vehicle body, building, aerospace, general fabrications, frame building, shop fitting and architectural use. The section can be drilled and cut easily. It can be welded with the correct equipment and training. Corrosion resistance can be improved with anodising or powder coating.
A
B
T
r
25
UN
EQU
AL
AN
GL
E
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continued
SECTION NO. A (mm) B (mm) T (mm) R (mm) WEIGHT (kg/m)
UA0001 6.50 12.50 1.00 - 0.049
UA0002 12.70 19.00 1.00 - 0.083
UA0003 12.70 19.05 2.00 - 0.161
UA0004 12.70 25.40 1.00 - 0.101
UA0005 12.70 25.40 2.00 - 0.196
UA0006 12.70 25.40 2.80 - 0.268
UA0007 12.70 31.75 1.00 - 0.119
UA0008 12.70 38.10 1.00 - 0.135
UA0009 12.70 38.10 2.00 - 0.264
UA0010 12.70 38.10 2.80 - 0.363
UA0011 12.70 44.45 1.20 - 0.182
UA0012 12.70 50.80 1.00 - 0.172
UA0013 12.70 50.80 2.80 - 0.461
UA0014 12.70 63.50 1.20 - 0.243
UA0015 12.70 76.20 1.20 - 0.285
UA0016 15.88 25.40 2.80 - 0.292
UA0017 19.05 25.40 1.20 - 0.141
UA0018 19.05 25.40 2.00 - 0.230
UA0019 19.05 25.40 2.80 - 0.316
UA0020 19.05 31.75 2.90 - 0.376
UA0021 19.05 38.10 1.00 - 0.152
UA0022 19.05 38.10 2.00 - 0.299
UA0023 19.05 38.10 2.80 - 0.412
UA0024 19.05 50.80 2.90 - 0.526
UA0025 25.40 31.75 2.80 - 0.412
UA0026 25.40 38.10 1.00 - 0.172
UA0027 25.40 38.10 2.00 - 0.333
UA0028 25.40 38.10 2.90 - 0.476
UA0029 25.40 38.10 4.50 - 0.720
UA0030 25.40 50.80 1.00 - 0.203
UA0031 25.40 50.80 2.00 - 0.402
UNEQUAL ANGLE
26
UN
EQU
AL
AN
GL
E
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
SECTION NO. A (mm) B (mm) T (mm) R (mm) WEIGHT (kg/m)
UA0032 25.40 50.80 2.80 - 0.557
UA0033 25.40 50.80 3.00 - 0.593
UA0034 25.40 50.80 4.50 - 0.871
UA0035 25.40 50.80 6.00 - 1.141
UA0036 25.40 63.50 2.80 - 0.653
UA0037 25.40 76.20 1.10 - 0.300
UA0038 25.40 76.20 2.00 - 0.538
UA0039 25.40 76.20 2.90 - 0.776
UA0040 25.40 76.20 6.00 - 1.554
UA0041 25.40 101.60 1.20 - 0.409
UA0042 25.40 101.60 2.90 - 0.975
UA0043 25.40 127.00 2.90 - 1.175
UA0044 30.00 45.00 10.00 - 1.755
UA0045 38.10 50.80 2.80 - 0.653
UA0046 38.10 50.80 4.50 - 1.027
UA0047 38.10 50.80 6.35 - 1.421
UA0048 38.10 63.50 2.80 - 0.750
UA0049 38.10 63.50 6.00 - 1.553
UA0050 38.10 63.50 6.35 - 1.639
UA0051 38.10 76.20 2.90 - 0.876
UA0052 38.10 76.20 4.50 - 1.339
UA0053 38.10 76.20 6.00 - 1.761
UA0054 38.10 101.60 2.90 - 1.075
UA0055 38.10 101.60 5.90 - 2.139
UA0056 40.00 50.00 2.00 - 0.477
UA0057 50.00 65.00 8.00 8.00 2.328
UA0058 50.00 150.00 6.00 - 3.157
UA0059 50.00 200.00 11.18/7.37 - 5.285
UA0060 50.80 63.50 6.00 6.00 1.775
UA0061 50.80 76.20 2.90 - 0.975
continuedUNEQUAL ANGLE
27
UN
EQU
AL
AN
GL
E
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
SECTION NO. A (mm) B (mm) T (mm) R (mm) WEIGHT (kg/m)
UA0062 50.80 76.20 4.50 - 1.494
UA0063 50.80 76.20 6.00 - 1.967
UA0064 50.80 76.20 8.00 8.00 2.560
UA0065 50.80 76.20 9.52 - 3.035
UA0066 50.80 101.60 2.90 - 1.175
UA0067 50.80 101.60 4.50 - 1.804
UA0068 50.80 101.60 6.00 - 2.380
UA0069 50.80 101.60 9.53 - 3.631
UA0070 50.80 127.00 6.00 - 2.793
UA0071 50.80 127.00 9.53 9.53 4.402
UA0072 50.80 152.40 9.53 5.00 5.020
UA0073 75.00 100.00 5.00 - 2.295
UA0074 75.00 100.00 8.00 8.00 3.627
UA0075 75.00 100.00 10.00 - 4.472
UA0076 76.20 101.58 9.53 9.53 4.402
UA0077 76.20 101.60 2.90 - 1.374
UA0078 76.20 101.60 6.00 - 2.783
UA0079 76.20 101.60 9.53 - 4.454
UA0080 76.20 127.00 6.00 - 3.390
UA0081 76.20 127.00 7.94 7.94 4.243
UA0082 76.20 127.00 9.53 - 5.018
UA0083 76.20 152.40 6.00 - 3.619
UA0084 76.20 152.40 9.53 - 5.660
UA0085 76.20 152.40 12.70 10.00 7.393
UA0086 80.00 120.00 10.00 - 5.153
UA0087 88.90 127.00 9.52 9.52 5.384
UA0088 100.00 200.00 10.00 6.00 7.887
UA0089 101.60 152.40 5.80 - 3.904
UA0090 101.60 152.40 9.53 9.53 6.369
UA0091 101.60 152.40 12.70 10.00 8.200
endUNEQUAL ANGLE
28
UN
EQU
AL
AN
GL
E
EQUAL CHANNEL
Aluminium Channel is used in a huge number
of industries and is an excellent material for a
considerable number of applications like protective
edges, covers, railing, rims, window and door frames,
trim, cladding, brackets, tracks, slides, clamps and
many more. It is light weight yet it provides strong
structural support. It is highly sought-after for its
strength, heat treatability, machinability, weldability
and good finishing characteristics.
A
A
T
29
EQU
AL
CH
AN
NEL
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
endEQUAL CHANNEL
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
EC0001 9.53 1.00 0.072
EC0002 9.53 1.50 0.104
EC0003 12.70 0.90 0.089
EC0004 12.70 1.57 0.149
EC0005 15.00 2.00 0.222
EC0006 15.88 1.10 0.135
EC0007 15.88 1.50 0.182
EC0008 19.05 1.10 0.164
EC0009 19.05 1.57 0.230
EC0010 19.05 1.90 0.275
EC0011 20.00 1.50 0.232
EC0012 25.00 2.00 0.385
EC0013 25.40 1.10 0.221
EC0014 25.40 2.00 0.391
EC0015 25.40 2.50 0.482
EC0016 25.40 2.80 0.536
EC0017 31.75 2.80 0.680
EC0018 38.10 2.90 0.853
EC0019 50.80 2.80 1.114
EC0020 76.20 3.00 1.810
30
EQU
AL
CH
AN
NEL
UNEQUAL CHANNEL
Aluminium Channel is used in a huge number
of industries and is an excellent material for a
considerable number of applications like protective
edges, covers, railing, rims, window and door frames,
trim, cladding, brackets, tracks, slides, clamps and
many more. It is light weight yet it provides strong
structural support. It is highly sought-after for its
strength, heat treatability, machinability, weldability
and good finishing characteristics.
A
B
T2
r
T1
31
UN
EQU
AL
CH
AN
NEL
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedUNEQUAL CHANNEL
SECTION NO. A (mm) B (mm) T1 (mm) T2 (mm) R (mm) WEIGHT (kg/m)
UC0001 5.54 7.14 1.27 1.27 - 0.054
UC0002 6.35 15.88 1.00 1.00 - 0.072
UC0003 12.70 19.05 1.00 1.00 - 0.115
UC0004 12.70 19.05 2.00 2.00 - 0.219
UC0005 12.70 25.40 0.80 0.80 - 0.107
UC0006 12.70 25.40 2.00 2.00 - 0.254
UC0007 12.70 31.75 1.00 1.00 - 0.149
UC0008 12.70 38.10 1.00 1.00 - 0.167
UC0009 12.70 44.45 1.00 1.00 - 0.184
UC0010 12.70 50.80 1.20 1.20 - 0.239
UC0011 12.70 63.50 1.20 1.20 - 0.281
UC0012 12.70 76.20 1.20 1.20 - 0.323
UC0013 12.70 101.60 1.20 1.20 - 0.405
M1870C 14.00 9.00 1.00 1.00 - 0.095
UC0062 19.05 25.40 2.36 2.36 - 0.376
UC0014 19.05 25.40 2.80 2.80 - 0.439
UC0016 19.05 38.10 2.90 2.90 - 0.553
UC0017 20.00 40.00 2.50 2.50 - 0.508
UC0018 25.00 50.00 2.00 2.00 - 0.520
UC0019 25.40 31.75 2.40 2.40 - 0.505
UC0020 25.40 38.10 1.00 1.00 - 0.235
UC0021 25.40 38.10 2.00 2.00 - 0.460
UC0022 25.40 38.10 2.80 2.80 - 0.632
UC0023 25.40 50.80 1.00 1.00 - 0.270
UC0024 25.40 50.80 2.80 2.80 - 0.728
UC0025 25.40 63.50 2.80 2.80 - 0.825
UC0026 25.40 76.20 2.00 2.00 - 0.665
UC0027 25.40 76.20 2.90 2.90 - 0.953
UC0028 25.40 79.00 1.10 1.10 - 0.402
UC0029 25.40 101.60 1.30 1.30 - 0.527
UC0030 25.40 101.60 2.90 2.90 - 1.152
32U
NEQ
UA
L C
HA
NN
EL
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
end
SECTION NO. A (mm) B (mm) T1 (mm) T2 (mm) R (mm) WEIGHT (kg/m)
UC0031 38.10 19.05 2.20 2.20 - 0.542
UC0032 38.10 19.05 2.40 2.40 - 0.588
UC0033 38.10 25.40 2.40 2.40 - 0.630
UC0034 38.10 50.80 2.80 2.80 - 0.921
UC0035 38.10 76.20 2.90 2.90 - 1.152
UC0036 38.10 76.20 6.00 6.00 - 2.283
UC0037 38.10 101.60 2.90 2.90 - 1.352
UC0038 50.80 25.40 2.80 2.80 - 0.921
UC0039 50.80 38.10 2.70 2.70 - 0.983
UC0040 50.80 76.20 3.00 3.00 - 1.397
UC0041 50.80 76.20 5.90 5.90 - 2.654
UC0042 50.80 101.60 2.80 2.80 - 1.499
UC0043 50.80 101.60 5.90 5.90 - 3.060
UC0044 50.80 127.00 6.35 6.00 - 3.522
UC0045 50.80 152.40 6.00 6.00 - 3.934
UC0046 50.80 152.40 9.53 9.53 5.00 5.911
UC0047 76.20 25.40 2.00 2.00 - 0.941
UC0048 76.20 25.40 2.50 2.50 - 1.172
UC0049 76.20 25.40 2.80 2.80 - 1.307
UC0050 76.20 38.10 2.80 2.80 - 1.403
UC0051 76.20 127.00 9.53 9.53 5.00 6.803
UC0052 76.20 152.40 8.00 6.00 - 5.555
UC0053 76.20 152.40 9.53 6.35 5.00 6.250
UC0054 76.20 152.40 12.70 9.53 5.00 8.412
UC0055 76.20 177.80 12.70 9.53 5.00 8.948
UC0056 76.20 203.20 12.70 9.53 5.00 9.655
UC0057 76.20 228.60 12.70 9.53 6.00 10.640
UC0058 100.00 38.00 2.80 2.80 - 1.763
UC0059 101.60 38.10 2.80 2.80 - 1.790
UC0060 101.60 203.20 13.92 9.35 6.00 12.311
UNEQUAL CHANNEL
33
UN
EQU
AL
CH
AN
NEL
SQUArE HOLLOW
Aluminium Square/rectangle Hollow has a
wide range of uses due to its light weight, good
strength properties, hardness, corrosion resistance,
machinability and weldability. It is used extensively
in areas like trellis, frames, support structures and
general fabrications. Appearance can be changed by
anodising and powder coating.
A
A
T
34
SQU
Ar
E H
OL
LOW
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedSQUArE HOLLOW
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
SH0001 9.53 1.50 0.131
SH0002 12.00 1.50 0.171
SH0003 12.70 1.00 0.127
SH0004 12.70 3.00 0.315
SH0005 15.88 1.00 0.161
SH0006 15.88 1.50 0.234
SH0007 15.88 2.70 0.385
SH0008 19.05 1.50 0.285
SH0009 19.05 2.00 0.370
SH0010 19.05 2.80 0.493
SH0011 19.10 1.00 0.196
SH0012 25.40 0.90 0.239
SH0013 25.40 1.50 0.389
SH0014 25.40 2.00 0.507
SH0015 25.40 2.80 0.686
SH0016 31.75 1.00 0.333
SH0017 31.75 1.50 0.492
SH0018 31.75 1.98 0.639
SH0019 31.75 3.00 0.935
SH0020 38.10 1.00 0.403
SH0021 38.10 1.20 0.480
SH0022 38.10 1.50 0.595
SH0023 38.10 1.98 0.775
SH0024 38.10 2.90 1.107
SH0025 38.10 4.78 1.727
SH0026 44.45 1.10 0.516
SH0027 44.45 1.59 0.739
SH0028 44.45 1.98 0.912
SH0029 44.45 3.00 1.348
SH0030 50.00 3.00 1.528
SH0031 50.80 1.15 0.618
35
SQU
Ar
E H
OL
LOW
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
endSQUArE HOLLOW
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
SH0032 50.80 1.50 0.131
SH0033 50.80 1.98 1.048
SH0034 50.80 2.80 1.457
SH0035 50.80 4.50 2.259
SH0036 50.80 6.00 2.914
SH0037 63.50 2.90 1.905
SH0038 63.50 6.00 3.739
SH0051 76.20 1.20 0.976
SH0039 76.20 2.00 1.609
SH0040 76.20 2.80 2.220
SH0041 76.20 4.50 3.500
SH0042 76.20 6.00 4.566
SH0043 101.60 2.00 2.159
SH0044 101.60 2.90 3.103
SH0045 101.60 6.00 6.218
SH0046 101.60 6.35 6.556
SH0047 127.00 3.00 4.036
SH0048 127.00 6.35 8.313
SH0049 152.40 3.00 4.858
SH0050 152.40 6.00 9.531
36
SQU
Ar
E H
OL
LOW
rECTANGLE HOLLOW
Aluminium Square/rectangle Hollow has a
wide range of uses due to its light weight, good
strength properties, hardness, corrosion resistance,
machinability and weldability. It is used extensively
in areas like trellis, frames, support structures and
general fabrications. Appearance can be changed by
anodising and powder coating.
A
B
T
37r
ECT
AN
GL
E H
OL
LOW
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continued
SECTION NO. A (mm) B (mm) T (mm) WEIGHT (kg/m)
rH0001 10.00 40.00 1.00 0.260
rH0002 12.70 25.40 1.00 0.196
rH0003 12.70 25.40 1.30 0.250
rH0004 12.70 25.40 1.50 0.285
rH0005 12.70 25.40 2.40 0.432
rH0006 12.70 38.10 1.30 0.340
rH0007 12.70 50.80 1.20 0.397
rH0008 12.70 50.80 2.00 0.643
rH0009 12.70 76.20 1.30 0.608
rH0010 19.05 31.75 2.39 0.596
rH0011 19.05 38.10 1.00 0.299
rH0012 19.05 38.10 1.50 0.440
rH0013 19.05 38.10 2.80 0.783
rH0014 20.00 40.00 2.00 0.607
rH0015 20.00 50.00 2.00 0.715
rH0016 20.00 150.00 1.70 1.536
rH0017 25.40 38.10 1.00 0.333
rH0018 25.40 38.10 1.50 0.491
rH0019 25.40 38.10 2.00 0.645
rH0020 25.40 38.10 2.90 0.907
rH0021 25.40 50.80 1.00 0.402
rH0022 25.40 50.80 1.50 0.595
rH0023 25.40 50.80 1.98 0.775
rH0024 25.40 50.80 2.80 1.072
rH0025 25.40 63.50 1.00 0.471
rH0026 25.40 63.50 2.90 1.306
rH0027 25.40 76.20 1.00 0.539
rH0028 25.40 76.20 1.50 0.802
rH0029 25.40 76.20 2.00 1.058
rH0030 25.40 76.20 2.80 1.457
rECTANGLE HOLLOW
38
rEC
TA
NG
LE
HO
LLO
W
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedrECTANGLE HOLLOW
SECTION NO. A (mm) B (mm) T (mm) WEIGHT (kg/m)
rH0031 25.40 101.60 1.20 0.810
rH0032 25.40 101.60 1.40 0.942
rH0033 25.40 101.60 2.00 1.333
rH0034 25.40 101.60 2.80 1.842
rH0035 25.40 127.00 2.00 1.609
rH0081 30.00 50.80 3.00 1.212
rH0036 31.75 63.50 2.00 0.989
rH0037 38.00 100.00 1.50 1.097
LH81006 38.00 100.00 2.30 1.663
LH81005 38.00 125.00 2.30 1.967
rH0038 38.10 50.80 1.20 0.561
rH0039 38.10 50.80 2.00 0.920
rH0040 38.10 50.80 2.90 1.306
rH0041 38.10 76.20 1.10 0.668
rH0082 38.10 76.20 1.50 0.904
rH0042 38.10 76.20 2.00 1.196
rH0043 38.10 76.20 2.90 1.705
rH0044 38.10 101.60 2.90 2.105
rH0045 44.45 76.20 1.10 0.706
rH0046 44.45 76.20 1.40 0.894
rH0047 44.45 76.20 2.00 1.266
rH0048 44.45 76.20 2.80 1.746
rH0049 44.45 101.60 1.10 0.859
rH0050 44.45 101.60 1.40 1.087
rH0051 44.45 101.60 2.00 1.539
rH0052 44.45 101.60 2.80 2.124
rH0053 50.00 150.00 1.90 2.020
rH0054 50.00 150.00 5.00 5.154
rH0055 50.00 175.00 2.20 2.633
rH0056 50.80 76.20 1.20 0.810
39
rEC
TA
NG
LE
HO
LLO
W
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
endrECTANGLE HOLLOW
SECTION NO. A (mm) B (mm) T (mm) WEIGHT (kg/m)
rH0057 50.80 76.20 1.90 1.269
rH0058 50.80 76.20 3.00 1.967
rH0059 50.80 76.20 4.50 2.878
rH0060 50.80 76.20 6.00 3.739
rH0061 50.80 101.60 1.50 1.214
rH0062 50.80 101.60 2.00 1.609
rH0063 50.80 101.60 2.90 2.304
rH0064 50.80 101.60 4.50 3.485
rH0065 50.80 101.60 5.90 4.496
rH0066 50.80 127.00 1.90 1.792
rH0067 50.80 127.00 2.80 2.604
rH0068 50.80 152.40 2.80 2.999
rH0069 50.80 203.20 3.00 4.032
rH0070 75.00 150.00 4.50 5.268
rH0071 75.00 200.00 3.00 4.373
rH0072 76.20 101.60 3.00 2.793
rH0073 76.20 101.60 4.50 4.117
rH0074 76.20 127.00 3.00 3.206
rH0075 76.20 152.40 2.90 3.502
rH0076 76.20 152.40 6.00 7.044
rH0077 100.00 150.00 5.00 6.510
rH0078 100.00 200.00 3.00 4.783
rH0079 100.00 300.00 3.50/3.00 7.462
rH0080 101.60 152.40 2.80 3.756
40
rEC
TA
NG
LE
HO
LLO
W
SQUArE BAr
Aluminium Square Bar offers a high strength-
to-weight ratio. It has a wealth of uses including
construction, engineering applications,
electronics, furniture making, window frames
and milling purposes.
A
A
41
SQU
Ar
E B
Ar
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
endSQUArE BAr
SECTION NO. A (mm) WEIGHT (kg/m)
SB0001 6.35 0.109
SB0002 7.94 0.171
SB0003 9.53 0.246
SB0004 10.00 0.271
SB0005 12.00 0.390
SB0006 12.70 0.435
SB0007 15.88 0.683
SB0008 19.05 0.983
SB0009 22.23 1.339
SB0010 25.40 1.748
SB0011 31.75 2.732
SB0012 38.10 3.934
SB0013 44.45 5.335
SB0014 50.80 6.994
SB0015 57.15 8.819
SB0016 63.50 10.939
SB0017 70.00 13.279
SB0018 76.20 15.750
SB0019 90.00 21.951
SB0020 95.25 24.615
SB0021 101.60 27.974
SB0022 114.30 35.381
SB0023 127.00 44.079
SB0024 139.70 53.416
SB0025 152.40 63.181
SB0026 165.10 73.883
SB0027 177.80 86.257
SB0028 203.20 114.426
SB0029 228.60 142.436
SB0030 250.00 169.240
42
SQU
Ar
E B
Ar
FLAT BAr
A basic aluminium component, Flat Bar has a wide range of applications and is commonly used in construction, engineering, manufacturing, fabrication and many other industries. With its excellent resistance, light weight and strength, it is greatly versatile.
T
A
43
FLA
T B
Ar
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedFLAT BAr
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
FB0001 6.00 3.10 0.052
FB0002 9.53 3.18 0.082
FB0003 9.53 6.35 0.164
FB0004 10.00 6.00 0.162
FB0005 12.70 1.00 0.034
FB0006 12.70 2.00 0.069
FB0007 12.70 2.90 0.100
FB0008 12.70 4.70 0.161
FB0009 12.70 6.35 0.218
FB0010 15.00 2.00 0.081
FB0011 15.88 1.59 0.068
FB0012 15.88 2.90 0.125
FB0013 15.88 4.50 0.194
FB0014 15.88 6.35 0.273
FB0015 19.00 2.00 0.103
FB0016 19.05 1.00 0.052
FB0017 19.05 1.50 0.077
FB0018 19.05 2.90 0.150
FB0019 19.05 4.50 0.232
FB0020 19.05 6.00 0.310
FB0021 19.05 6.35 0.328
FB0022 19.05 9.53 0.492
FB0023 19.05 12.70 0.656
FB0024 20.00 2.00 0.108
FB0025 25.00 2.00 0.136
FB0026 25.40 1.00 0.069
FB0027 25.40 1.50 0.103
FB0028 25.40 2.80 0.193
FB0029 25.40 4.50 0.310
FB0030 25.40 6.00 0.413
FB0031 25.40 8.00 0.551
44
FLA
T B
Ar
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedFLAT BAr
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
FB0032 25.40 9.53 0.656
FB0033 25.40 12.70 0.874
FB0034 25.40 15.90 1.094
FB0035 25.40 19.05 1.311
FB0036 31.75 1.20 0.103
FB0037 31.75 1.59 0.138
FB0038 31.75 2.00 0.172
FB0039 31.75 2.80 0.241
FB0040 31.75 4.50 0.387
FB0041 31.75 6.00 0.516
FB0042 31.75 8.00 0.689
FB0043 31.75 9.53 0.821
FB0044 31.75 12.70 1.094
FB0045 31.75 15.87 1.366
FB0046 31.75 19.05 1.639
FB0047 31.75 25.40 2.186
FB0048 38.10 1.00 0.103
FB0049 38.10 1.20 0.124
FB0050 38.10 1.59 0.164
FB0051 38.10 2.00 0.207
FB0052 38.10 2.90 0.299
FB0053 38.10 4.50 0.465
FB0054 38.10 6.00 0.620
FB0055 38.10 8.00 0.826
FB0056 38.10 9.53 0.984
FB0057 38.10 12.70 1.306
FB0058 38.10 15.88 1.641
FB0059 38.10 19.05 1.967
FB0060 38.10 25.40 2.613
FB0061 38.10 31.75 3.281
FB0062 44.45 2.90 0.349
45
FLA
T B
Ar
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedFLAT BAr
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
FB0063 44.45 4.50 0.542
FB0064 44.45 4.76 0.574
FB0065 44.45 6.00 0.723
FB0066 44.45 8.00 0.963
FB0067 44.45 9.53 1.150
FB0068 44.45 12.70 1.531
FB0069 44.45 15.88 1.914
FB0070 44.45 19.05 2.297
FB0071 44.45 25.40 3.061
FB0072 44.45 31.75 3.828
FB0073 44.45 38.10 4.592
FB0074 50.80 1.20 0.165
FB0075 50.80 1.57 0.216
FB0076 50.80 2.00 0.275
FB0077 50.80 2.80 0.385
FB0078 50.80 4.50 0.619
FB0079 50.80 6.00 0.826
FB0080 50.80 8.00 1.027
FB0081 50.80 9.53 1.312
FB0082 50.80 12.70 1.748
FB0083 50.80 15.88 2.178
FB0084 50.80 19.05 2.625
FB0085 50.80 25.40 3.496
FB0086 50.80 31.75 4.375
FB0087 50.80 38.10 5.245
FB0088 50.80 44.45 6.201
FB0089 63.50 1.50 0.258
FB0090 63.50 2.90 0.499
FB0091 63.50 4.50 0.774
FB0092 63.50 6.00 1.033
FB0093 63.50 8.00 1.377
46
FLA
T B
Ar
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedFLAT BAr
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
FB0094 63.50 9.53 1.640
FB0095 63.50 12.70 2.185
FB0096 63.50 15.88 2.736
FB0097 63.50 19.05 3.278
FB0098 63.50 25.40 4.375
FB0099 63.50 31.75 5.510
FB0100 63.50 38.10 6.561
FB0101 63.50 44.45 7.656
FB0102 63.50 50.80 8.750
FB0103 76.20 1.20 0.247
FB0104 76.20 2.90 0.599
FB0105 76.20 4.50 0.929
FB0106 76.20 6.00 1.239
FB0107 76.20 8.00 1.715
FB0108 76.20 9.53 1.968
FB0109 76.20 12.70 2.623
FB0110 76.20 15.88 3.283
FB0111 76.20 19.05 3.934
FB0112 76.20 25.40 5.245
FB0113 76.20 31.75 6.613
FB0114 76.20 38.10 7.875
FB0115 76.20 44.45 9.301
FB0116 76.20 50.80 10.500
FB0117 76.20 63.50 13.123
FB0118 80.00 8.00 1.733
FB0119 88.90 2.90 0.699
FB0120 88.90 9.53 2.297
FB0121 88.90 12.70 3.061
FB0122 88.90 15.88 3.830
FB0123 88.90 19.05 4.592
FB0124 88.90 25.40 6.125
47
FLA
T B
Ar
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedFLAT BAr
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
FB0125 88.90 76.20 18.377
FB0126 100.00 8.00 2.168
FB0127 101.60 1.50 0.413
FB0128 101.60 2.90 0.798
FB0129 101.60 3.18 0.876
FB0130 101.60 4.50 1.239
FB0131 101.60 6.00 1.657
FB0132 101.60 9.53 2.623
FB0133 101.60 12.70 3.497
FB0134 101.60 15.88 4.377
FB0135 101.60 19.05 5.245
FB0136 101.60 25.40 6.994
FB0137 101.60 31.75 8.818
FB0138 101.60 38.10 11.025
FB0139 101.60 44.45 12.250
FB0140 101.60 50.80 14.000
FB0141 101.60 63.50 17.500
FB0142 101.60 76.20 20.984
FB0143 127.00 3.00 1.033
FB0144 127.00 6.35 2.185
FB0145 127.00 8.00 2.754
FB0146 127.00 9.52 3.264
FB0147 127.00 12.70 4.375
FB0148 127.00 15.88 5.470
FB0149 127.00 19.05 6.561
FB0150 127.00 25.40 8.748
FB0151 127.00 31.75 11.022
FB0152 127.00 38.10 12.986
FB0153 127.00 50.80 17.481
FB0154 127.00 76.20 26.311
FB0155 130.00 44.45 15.675
48
FLA
T B
Ar
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
endFLAT BAr
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
FB0156 130.00 63.50 22.902
FB0157 150.00 10.00 4.065
FB0158 152.40 3.00 1.239
FB0159 152.40 6.00 2.478
FB0160 152.40 8.00 3.305
FB0161 152.40 9.53 3.936
FB0162 152.40 12.70 5.250
FB0163 152.40 15.88 6.534
FB0164 152.40 19.05 7.875
FB0165 152.40 25.40 10.500
FB0166 152.40 38.10 15.750
FB0167 152.40 50.80 20.683
FB0168 152.40 76.20 31.683
FB0169 155.00 63.50 27.421
FB0170 177.80 25.40 12.251
FB0171 200.00 38.10 21.645
FB0172 203.20 6.00 3.302
FB0173 203.20 9.53 5.249
FB0174 203.20 12.70 7.000
FB0175 203.20 15.88 8.476
FB0176 203.20 25.40 14.000
49
FLA
T B
Ar
rOUND TUBING
Aluminium round Tubing has a wide variety
of structural and architectural applications.
It is commonly used in heating, ventilation
and air conditioning and plumbing systems,
and for applications in the aerospace, automotive,
chemical processing, food and beverage,
manufacturing and medical industries.
A
T
50r
OU
ND
TU
BIN
G
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedrOUND TUBING
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
rT0001 6.35 1.30 0.056
rT0002 8.00 1.00 0.060
rT0003 9.53 0.90 0.066
rT0004 9.53 1.50 0.102
rT0005 12.70 1.00 0.099
rT0006 12.70 1.50 0.143
rT0007 12.70 3.18 0.258
rT0008 15.88 1.00 0.126
rT0009 15.88 1.50 0.184
rT0010 19.05 1.00 0.154
rT0011 19.05 1.57 0.234
rT0012 19.05 2.80 0.387
rT0013 22.00 1.60 0.277
rT0082 22.00 2.00 0.341
rT0014 22.22 1.00 0.181
rT0015 25.40 1.00 0.208
rT0016 25.40 1.57 0.319
rT0017 25.40 2.00 0.398
rT0018 25.40 2.80 0.539
rT0019 25.40 4.50 0.798
rT0020 25.40 6.00 0.992
rT0021 25.40 6.35 1.030
rT0022 28.57 1.20 0.279
rT0023 31.75 1.20 0.312
rT0024 31.75 1.57 0.403
rT0025 31.75 2.00 0.506
rT0026 31.75 2.80 0.690
rT0027 31.75 4.50 1.044
rT0028 31.75 5.88 1.294
rT0029 31.75 6.35 1.373
rT0030 38.00 1.50 0.467
51r
OU
ND
TU
BIN
G
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continuedrOUND TUBING
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
rT0031 38.10 1.15 0.362
rT0032 38.10 1.50 0.467
rT0033 38.10 2.00 0.614
rT0034 38.10 2.80 0.842
rT0035 38.10 4.50 1.287
rT0036 38.10 6.00 1.641
rT0037 38.10 12.70 2.749
rT0038 44.45 1.50 0.549
rT0039 44.45 2.80 0.993
rT0083 45.00 6.00 1.992
rT0040 50.00 1.50 0.620
rT0041 50.00 2.00 0.817
rT0042 50.80 1.20 0.506
rT0043 50.80 1.50 0.630
rT0044 50.80 2.80 1.144
rT0045 50.80 4.50 1.767
rT0046 50.80 5.90 2.255
rT0047 57.15 2.80 1.296
rT0048 63.50 1.20 0.636
rT0084 63.50 1.50 0.792
rT0049 63.50 2.80 1.448
rT0050 63.50 6.00 2.937
rT0051 63.50 6.35 3.090
rT0052 76.20 1.57 0.998
rT0053 76.20 2.80 1.750
rT0054 76.20 4.50 2.750
rT0055 76.20 4.75 2.890
rT0056 76.20 6.00 3.587
rT0057 82.45 3.08 2.062
rT0058 88.90 3.00 2.194
rT0059 88.90 4.50 3.234
52r
OU
ND
TU
BIN
G
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
endrOUND TUBING
SECTION NO. A (mm) T (mm) WEIGHT (kg/m)
rT0060 88.90 6.00 4.235
rT0061 96.00 3.00 2.376
rT0062 101.60 2.80 2.355
rT0063 101.60 6.00 4.883
rT0064 110.00 3.00 2.733
rT0065 114.30 6.00 5.532
rT0066 127.00 2.80 2.961
rT0067 127.00 6.00 6.180
rT0068 127.00 9.50 9.503
rT0069 127.00 12.70 12.371
rT0070 139.70 6.00 6.836
rT0071 139.70 9.52 10.561
rT0072 139.70 12.70 13.745
rT0073 152.40 2.80 3.566
rT0074 152.40 6.35 7.897
rT0075 152.40 9.52 11.592
rT0076 152.40 12.70 15.119
rT0077 177.80 6.35 9.278
rT0078 177.80 12.70 17.869
rT0079 203.20 6.35 10.625
rT0080 203.20 12.70 20.618
rT0081 254.00 6.35 13.401
53r
OU
ND
TU
BIN
G
rOUND rOD
Aluminium round rod has extremely varied uses
due to its light weight, high strength, corrosion
resistant properties and ease of machining. It is used
in a wide range of applications including hardware,
automotive parts, couplings and connectors, hinge
pins, fasteners and fittings.
A
54
rO
UN
D r
OD
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
continued
SECTION NO. A (mm) WEIGHT (kg/m)
rr0001 4.00 0.034
rr0002 4.80 0.049
rr0003 6.00 0.077
rr0004 7.94 0.134
rr0005 9.00 0.172
rr0006 9.53 0.193
rr0007 12.70 0.343
rr0008 15.88 0.537
rr0009 19.05 0.773
rr0010 22.23 1.051
rr0011 25.40 1.373
rr0012 28.58 1.740
rr0013 30.00 1.915
rr0014 31.75 2.146
rr0015 34.93 2.611
rr0016 38.10 3.090
rr0017 42.00 3.758
rr0018 44.45 4.206
rr0019 47.63 4.825
rr0020 50.80 5.493
rr0021 57.15 6.953
rr0022 63.50 8.582
rr0023 69.85 10.389
rr0024 76.20 12.359
rr0025 82.55 14.516
rr0026 88.90 16.821
rr0027 95.25 19.455
rr0028 101.60 21.974
rr0029 107.95 24.828
rr0030 114.30 27.834
rr0031 120.65 31.012
rOUND rOD
55r
OU
ND
rO
D
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
endrOUND rOD
SECTION NO. A (mm) WEIGHT (kg/m)
rr0032 127.00 34.366
rr0033 133.35 38.209
rr0034 139.70 41.579
rr0035 146.05 46.053
rr0036 152.40 49.482
rr0037 165.10 58.500
rr0038 177.80 67.903
rr0039 190.50 77.220
rr0040 203.20 88.744
rr0041 215.90 100.180
rr0042 228.60 111.107
rr0043 241.30 124.370
rr0044 254.00 137.520
rr0045 266.70 151.840
rr0046 279.40 167.980
rr0047 292.10 183.948
rr0048 304.80 198.608
rr0049 330.20 232.930
rr0050 355.60 270.500
rr0051 381.00 310.110
rr0052 406.40 352.840
rr0053 431.80 398.320
rr0054 457.20 446.560
rr0055 500.00 534.080
56r
OU
ND
rO
D
TEE
Aluminium Tee Section is mainly used in the marine
and construction industries. It is lightweight yet
strong, and provides an even strength distribution.
B
A
T1
T2
r
57T
EE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
TEE end
SECTION NO. A (mm) B (mm) T1 (mm) T2 (mm) R (mm) WEIGHT (kg/m)
T0001 12.70 12.70 1.00 1.00 - 0.066
T0002 19.05 19.05 1.00 1.00 - 0.101
T0003 19.05 19.05 2.80 2.80 - 0.267
T0004 25.40 25.40 0.90 0.90 - 0.122
T0005 25.40 25.40 2.90 2.90 - 0.376
T0006 31.75 31.75 2.80 2.80 - 0.459
T0007 38.10 38.10 2.80 2.80 - 0.557
T0008 38.10 38.10 6.00 6.00 - 1.141
T0009 40.00 80.00 6.00 6.00 5.00 1.883
T0010 50.00 60.00 6.00 4.00 5.00 1.416
T0011 50.00 100.00 5.00 5.00 5.00 1.995
T0012 50.00 125.00 5.00 8.00 8.00 3.652
T0013 50.00 150.00 5.00 3.50 5.00 2.083
T0014 50.00 150.00 9.00 3.50 5.00 2.586
T0015 50.00 200.00 10.00 6.00 5.00 4.477
T0016 50.80 50.80 2.90 2.90 - 0.776
T0017 50.80 50.80 4.50 4.50 4.00 1.203
T0018 50.80 50.80 5.00 5.00 - 1.310
T0019 50.80 50.80 5.80 5.80 - 1.505
T0020 50.80 50.80 6.00 6.00 5.00 1.584
T0021 50.80 63.50 6.00 6.00 5.00 1.791
T0022 50.80 76.20 6.00 6.00 5.00 1.998
T0023 50.80 101.60 6.00 6.00 5.00 2.411
T0024 63.50 63.50 6.00 6.00 5.00 1.998
T0025 65.00 100.00 6.00 6.00 5.00 2.616
T0026 75.00 125.00 8.00 6.00 5.00 3.558
T0027 76.20 76.20 5.00 5.00 - 1.997
T0028 76.20 76.20 6.00 6.00 5.00 2.411
T0029 80.00 156.00 6.00 6.00 6.00 3.777
T0030 100.00 125.00 6.00 6.00 5.00 3.593
T0031 110.00 150.00 10.00 4.00 5.00 4.528
58T
EE
B
A
T1
T2
r
I-BEAM
Aluminium I-Beams are the standard shape for
aluminium beams used in floor and ceiling joists
to ensure that a structure is physically sound. It
provides an excellent structural base for framework,
overhead and other supports, trailers, truck bead
and railings, and more.
59I-
BE
AM
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
I-BEAM
SECTION NO. A (mm) B (mm) T1 (mm) T2 (mm) R (mm) WEIGHT (kg/m)
IB0001 50.80 76.20 6.00 6.00 3.00 2.718
IB0002 50.80 101.60 6.00 6.00 5.00 3.169
IB0003 76.20 101.60 6.35 4.78 9.53 3.987
IB0004 76.20 152.40 8.00 8.00 6.00 6.350
IB0005 76.20 177.80 9.53 6.35 5.00 6.729
IB0006 88.90 127.00 7.92 6.35 11.10 6.023
IB0007 88.90 152.40 9.53 6.35 11.13 7.178
IB0008 100.00 150.00 5.00 4.50 3.00 4.442
IB0009 101.60 101.60 7.92 6.35 11.10 6.128
IB0010 101.60 152.40 9.53 7.14 11.10 8.118
end
60
I-B
EA
M
BULB FLAT BAr
Aluminium Bulb Flat Bar is mostly used in the marine industry, both in the initial construction as well as the working life phase. Its rounded shape enhances drainage, and minimises dirt and moisture traps. There is also no need for edge grinding. It delivers buckling resistance at a lower weight than flat bars or angles.
A
B
TA
B
T2
T1
61
BU
LB
FL
AT
BA
r
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
A
B
T2
T1
SECTION NO. A (mm) B (mm) T1 (mm) T2 (mm) WEIGHT (kg/m)
BF0001 11.50 45.00 8.00 4.00 0.648
BF0002 12.00 50.00 8.00 5.00 0.830
BF0003 15.00 60.00 11.00 5.00 1.110
BF0004 20.00 85.00 15.00 5.00 1.760
SECTION NO. A (mm) B (mm) T (mm) WEIGHT (kg/m)
BF0005 14.00 50.00 4.50 0.752
BF0006 19.00 76.20 5.60 1.463
BF0007 19.00 98.70 5.40 1.755
BF0008 19.00 127.00 6.00 2.340
A
B
T
endBULB FLAT BAr
62
BU
LB
FL
AT
BA
r
MISCELLANEOUS
Ar
CH
ITE
CT
Ur
AL
AN
D O
TH
Er
SE
CT
ION
S
ARCHITECTURE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
ROUND CORNER ANGLE
RA0002 / 0.086 kg/m
9.50mm
19.00mm
1.20mm
RA0001 / 0.076 kg/m
9.53mm
15.88mm
1.20mm
MISCELLANEOUS
65
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
ROUND CORNER ANGLE
RA0003 / 0.168 kg/m
19.05mm
19.05mm 1.80mm
RA0004 / 0.230 kg/m
25.40mm
25.40mm
1.80mm 66
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
E1885R / 0.352 kg/m
25.40mm
51.00mm
4.20mm
1.60mm
EDGING
E1885A / 0.392 kg/m
28.60mm25.40mm
3.20mm
1.50mm
49.8mm
MISCELLANEOUS
E1885 / 0.234 kg/m
25.00mm
46.00mm
2.00mm 1.00mm
67
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
E4076 / 0.180 kg/m
12.50mm
39.00mm
15.46mm
1.20mm
EDGING
E5011 / 0.143 kg/m
25.40mm
1.27mm
3.56mm
E6962 / 0.104 kg/m
29.15mm
2.65mm1.40mm
68
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
HB0003 / 0.814 kg/m
12.70mm
31.70mm
HALF ROUND BAR
HB0001 / 0.099 kg/m
4.00mm
19.00mm
2.60mm
HB0002 / 0.190 kg/m
25.40mm
4.80mm
3.80mm
MISCELLANEOUS
69
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
SKY LIGHT
SL84332 / 0.176 kg/m
7.00mm
50.00mm
1.00mm 1.50mm
SL84333 / 0.461 kg/m
7.50mm
50.00mm
1.20mm
10.20mm 12.60mm
SLF2 / 0.204 kg/m
25.00mm
20.00mm
1.20mm
25.00mm
18.00mm
SLF1 / 0.191 kg/m
6.20mm 8.60mm
1.00mm
M1870C / 0.095 kg/m
14.00mm
9.00mm
70
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
P5563 / 0.195 kg/m
63.50mm
0.90mm
4.60mm
P5566 / 0.355 kg/m
100.00mm
4.50mm
1.00mm
PUN4 / 0.089 kg/m
25.00mm
5.00mm
0.80mm
P3208 / 0.452 kg/m
28.00mm
87.00mm
1.00mm
PARTITION
MISCELLANEOUS
71
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
P3207 / 0.297 kg/m
87.00mm
5.00mm
1.00mm
P71283 / 0.610 kg/m
87.00mm
44.50mm
28.50mm
1.05mm
UC0028 / 0.402 kg/m
79.00mm
25.40mm
1.10mm
PARTITION
72
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
M5116 / 0.235 kg/m
29.35mm
14.00mm
21.50mm
1.80mm
M5830 / 0.104 kg/m
8.20mm
21.50mm
1.00mm
M6081 / 0.064 kg/m
6.35mm
12.70mm
1.00mm
7.00mm
OTHERS
MISCELLANEOUS
73
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
M1983 / 0.113 kg/m
6.45mm
23.90mm
1.55mm
E21047A / 0.129 kg/m
10.80mm
9.80mm
23.40mm
1.25mm
M5128 / 0.337 kg/m
16.00mm
35.10mm
16.00mm
2.20mm
OTHERS
74M
ISC
ELL
AN
EOU
S
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
2.30mm
LS81006 / 1.663 kg/m
38.00mm
100.00mm
LS81005 / 1.967 kg/m
38.00mm
125.00mm
2.30mm
SUBSTATION
MISCELLANEOUS
75
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LS85543C / 1.293 kg/m
40.00mm
25.00mm
100.00mm
2.30mm
LS81007 / 1.789 kg/m
38.00mm
17.50mm
20.50mm
110.00mm
100.00mm
2.30mm
SUBSTATION
76M
ISC
ELL
AN
EOU
S
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
WHITE BOARD
WBG22 / 0.251 kg/m
30.50mm0.90mm
19.50mm
14.50mm
WBG23 / 0.226 kg/m
25.00mm0.90mm
19.50mm
14.50mm
18.20mm 1.10mm
90.00mm
19.30mm
WB73049 / 0.641 kg/m
MISCELLANEOUS
77
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
AUSTRALIA TRACK
AT320A / 0.471 kg/m
30.50mm
28.10m
1.60mm
23.00mm
8.70mm
13.00mm
10.50mm
1.30mm
FURNITURE
FU93442 / 0.201 kg/m
19.90mm
25.80mm
1.20mm
6.20mm
LIGHT BOX
LB93300 / 0.331 kg/m
CURTAIN TRACK
CA21036 / 0.182 kg/m
15.00mm
22.00mm
0.90mm
4.50mm
78
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
25.40mm
1.50mm
1.00mm
DECORATIVE PIPE
DP0001 / 0.252 kg/m
13.80mm
1.50mm
88.50mm
FERRY
FE72903 / 0.882 kg/m
MISCELLANEOUS
79
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
This page is intentionally left blank.
80
MIS
CEL
LA
NEO
US
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
CW0003 / 0.684 kg/m
20.10mm
48.00mm
3.00mm
13.10mm
CW0001 / 2.370 kg/m
50.00mm
111.00mm
2.50mm
90.00mm
CW0002 / 0.312 kg/m
15.00mm
50.00mm
1.60mm
CURTAIN WALL
ArCHITECTUrE
81
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
CW0004 / 2.029 kg/m
50.00mm
111.00mm
90.00mm
2.00mm
CW0005 / 0.337 kg/m
7.00mm
73.90mm
1.50mm
82
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LOUVER – Z
LZ1899 / 0.406 kg/m
70.64mm
31.75mm
1.57mm
LZ1899A / 0.294 kg/m
70.64mm
31.75mm
1.10mm
LI85729 / 0.289 kg/m
12.70mm
38.00mm
1.80mm
ArCHITECTUrE
83
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LOUVER – Z
LZ7563 / 0.262 kg/m
53.00mm
32.80mm
1.20mm
LZ1562 / 0.448 kg/m
1 1.50mm
82.55mm
1.57mm
84
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LOUVER – Z
LZ83612 / 0.869 kg/m
58.00mm
104.75mm
2.30mm
LI9783 / 0.355 kg/m
12.70mm
61.20mm
1.50mm
1.60mm
58.20mm
ArCHITECTUrE
85
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LOUVER – Z
LZ7473 / 0.615 kg/m
1.30mm
120.00mm
42.00mm
LI85729 / 0.289 kg/m
12.70mm
38.00mm
1.80mm
33.40mm
LZ83613 / 0.762 kg/m
103.25mm
2.30mm
LI7471 / 0.208 kg/m
1 1.00mm
44.00mm
1.00mm1.20mm
86
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LI1207 / 0.259 kg/m
20.00mm
45.50mm
43.30mm
1.10mm
LC1206 / 0.557 kg/m
65.60mm
42.50mm
1.20mm
LOUVER – CHEVRON
ArCHITECTUrE
87
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LOUVER – HOLLOW
LH0001 / 0.800 kg/m
12.00mm
100.00mm
1.10mm
LH0002 / 0.774 kg/m
70.00mm
20.00mm
1.40mm
88
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LH0004 / 0.458 kg/m
25.00mm
25.00mm
1.50mm
LH0003 / 0.510 kg/m
24.00mm
38.00mm
1.20mm
LOUVER – HOLLOW
ArCHITECTUrE
89
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LH0005 / 0.554 kg/m
25.00mm
50.80mm
1.20mm
LH0006 / 0.515 kg/m
25.40mm
63.50mm
1.00mm
LOUVER – HOLLOW
90
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LH0007 / 0.713 kg/m
25.00mm
76.20mm
1.20mm
LH0008 / 0.706 kg/m
50.80mm
50.80mm
1.20mm
LOUVER – HOLLOW
ArCHITECTUrE
91
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LH0010 / 1.858 kg/m
50.80mm
152.40mm
1.60mm
LH0009 / 1.197 kg/m
50.80mm
101.60mm
1.40mm
LOUVER – HOLLOW
92
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LOUVER – AEROFOIL
LA0001 / 0.369 kg/m
12.70mm
50.80mm
1.10mm
LA0002 / 0.580 kg/m
15.00mm
75.00mm
1.20mm
LA0003 / 0.542 kg/m
15.00mm
85.00mm
1.15mm
ArCHITECTUrE
93
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LOUVER – AEROFOIL
LA0004 / 0.844 kg/m
16.00mm
115.00mm
1.20mm
LA0005 / 0.795 kg/m
25.00mm
100.00mm
1.30mm
LA0006 / 1.222 kg/m
25.00mm
150.00mm
1.30mm
94
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LOUVER – AEROFOIL
LA0007 / 1.452 kg/m
30.00mm
153.60mm
1.50mm
LA0008 / 1.702 kg/m
50.00mm
150.00mm
1.80mm
ArCHITECTUrE
95
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
LOUVER – AEROFOIL
LA0009 / 3.636 kg/m
200.00mm
50.00mm
2.80mm
96
Ar
CH
ITEC
TU
rE
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
TC2020 / 0.435 kg/m
20.00mm 6.20mm
20.00mm
1.50mm
5.50mm
DETAILdrawing scale 1:2
TC2040 / 0.772 kg/m
40.00mm
20.00mm 6.20mm
1.50mm
CONVEyOr
97
CO
NV
Ey
Or
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
TC3030 / 0.842 kg/m
30.00mm
8.30mm
30.00mm
2.00mm
TC3060 / 1.506 kg/m
60.00mm
8.30mm
30.00mm 2.00mm
7.20mm
DETAILdrawing scale 1:2
98
CO
NV
Ey
Or
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
TC4040 / 1.420 kg/m
40.00mm
10.50mm
40.00mm
2.00mm
TC4080 / 2.668 kg/m
10.50mm
80.00mm
40.00mm 2.00mm
10.10mm
DETAILdrawing scale 1:2
CONVEyOr
99
CO
NV
Ey
Or
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
TC4545L / 1.690 kg/m
45.00mm
10.50mm
45.00mm
2.30mm
10.10mm
DETAILdrawing scale 1:2
TC4590 / 3.600 kg/m
90.00mm
10.50mm45.00mm 2.50mm
45.00mm
10.50mm
45.00mm
2.50mm
TC4545HD / 1.971 kg/m
100
CO
NV
Ey
Or
ALUMINIUM SHEETS.
COILS AND PLATES
AL
UM
INIU
M S
HE
ET
S. C
OIL
S A
ND
PL
AT
ES
ALUMINIUM SHEET 1100
When aluminium is passed between rolls under
pressure, it becomes thinner and longer in the
direction in which it is moving. This simple process
is the basis for producing aluminium plates, sheets
and foils of a variety of sizes and thicknesses.
The most common form of industrial aluminium,
sheet aluminium is widely utilised in aerospace,
transportation, packaging and construction. Sheet
aluminium can be colour-anodised to black, gold, red,
blue and hundreds of other colours. It can be etched
to a matte finish, polished to a sparkling brightness, or
textured and painted to resemble wood.
W
L
T
103
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
ALUMINIUM SHEET 1100
DIMENSION (WxL)
4’ X 8’ 4’ X 10’ 4’ X 12’ 5’ X 8’ 5’ X 10’ 5’ X 12’ 3’ X 8’
1219.20 X
2438.40mm
1219.20 X
3048.00mm
1219.20 X
3657.60mm
1524.00 X
2438.40mm
1524.00 X
3048.00mm
1524.00 X
3657.60mm
914.44 X
2438.40mm
THICKNESS (mm) WEIGHT (Kg / Pc)
0.3 2.42 3.02 3.63 3.02 3.78 4.53 1.81
0.4 3.22 4.03 4.83 4.03 5.04 6.04 2.42
0.5 4.03 5.04 6.04 5.04 6.29 7.55 3.02
0.6 4.83 6.04 7.25 6.04 7.55 9.06 3.63
0.7 5.64 7.05 8.46 7.05 8.81 10.57 4.23
0.8 6.45 8.06 9.67 8.06 10.07 12.08 4.83
0.9 7.25 9.06 10.88 9.06 11.33 13.60 5.44
1 8.06 10.07 12.08 10.07 12.59 15.11 6.04
1.2 9.67 12.08 14.50 12.08 15.11 18.13 7.25
1.5 12.08 15.11 18.13 15.11 18.88 22.66 9.06
2 16.11 20.14 24.17 20.14 25.18 30.21 12.08
2.3 18.53 23.16 27.80 23.16 28.95 34.74 13.90
2.5 20.14 25.18 30.21 25.18 31.47 37.77 15.11
3 24.17 30.21 36.25 30.21 37.77 45.32 18.13
4 32.23 40.28 48.34 40.28 50.35 60.42 24.17
4.5 36.25 45.32 54.38 45.32 56.65 67.98 27.19
5 40.28 50.35 60.42 50.35 62.94 75.53 30.21
6 48.34 60.42 72.51 60.42 75.53 90.64 36.25
7 56.40 70.49 84.59 70.49 88.12 105.74 42.30
8 64.45 80.57 96.68 80.57 100.71 120.85 48.34
9 72.51 90.64 108.76 90.64 113.30 135.95 54.38
9.53 76.78 95.97 115.17 95.97 119.97 143.96 57.58
10 80.57 100.71 120.85 100.71 125.88 151.06 60.42
Items that are highlighted and in bold are stock items. Please contact us to find out about other sizes as well as stock availability.
All weights as shown are based on a theoratical calculation and actual weights might vary.
Density=2.71g/cm3
104
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
ALUMINIUM SHEET 3003
When aluminium is passed between rolls under
pressure, it becomes thinner and longer in the
direction in which it is moving. This simple process
is the basis for producing aluminium plates, sheets
and foils of a variety of sizes and thicknesses.
The most common form of industrial aluminium,
sheet aluminium is widely utilised in aerospace,
transportation, packaging and construction. Sheet
aluminium can be colour-anodised to black, gold, red,
blue and hundreds of other colours. It can be etched
to a matte finish, polished to a sparkling brightness, or
textured and painted to resemble wood.
W
L
T
105
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
ALUMINIUM SHEET 3003
DIMENSION (WxL)
4’ X 8’ 4’ X 10’ 4’ X 12’ 5’ X 8’ 5’ X 10’ 5’ X 12’
1219.20 X
2438.40mm
1219.20 X
3048.00mm
1219.20 X
3657.60mm
1524.00 X
2438.40mm
1524.00 X
3048.00mm
1524.00 X
3657.60mm
THICKNESS (mm) WEIGHT (Kg / Pc)
0.3 2.43 3.04 3.65 3.04 3.80 4.57
0.4 3.25 4.06 4.87 4.06 5.07 6.09
0.5 4.06 5.07 6.09 5.07 6.34 7.61
0.6 4.87 6.09 7.30 6.09 7.61 9.13
0.7 5.68 7.10 8.52 7.10 8.88 10.65
0.8 6.49 8.12 9.74 8.12 10.15 12.17
0.9 7.30 9.13 10.96 9.13 11.41 13.70
1 8.12 10.15 12.17 10.15 12.68 15.22
1.2 9.74 12.17 14.61 12.17 15.22 18.26
1.5 12.17 15.22 18.26 15.22 19.02 22.83
2 16.23 20.29 24.35 20.29 25.36 30.44
2.3 18.67 23.33 28.00 23.33 29.17 35.00
2.5 20.29 25.36 30.44 25.36 31.70 38.04
3 24.35 30.44 36.52 30.44 38.04 45.65
4 32.46 40.58 48.70 40.58 50.73 60.87
Items that are highlighted and in bold are stock items. Please contact us to find out about other sizes as well as stock availability.
All weights as shown are based on a theoratical calculation and actual weights might vary.
Density=2.73g/cm3
106
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
ALUMINIUM SHEET 5052
When aluminium is passed between rolls under
pressure, it becomes thinner and longer in the
direction in which it is moving. This simple process
is the basis for producing aluminium plates, sheets
and foils of a variety of sizes and thicknesses.
The most common form of industrial aluminium,
sheet aluminium is widely utilised in aerospace,
transportation, packaging and construction. Sheet
aluminium can be colour-anodised to black, gold, red,
blue and hundreds of other colours. It can be etched
to a matte finish, polished to a sparkling brightness, or
textured and painted to resemble wood.
W
L
T
107
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
ALUMINIUM SHEET 5052
DIMENSION (WxL)
4’ X 8’ 4’ X 10’ 4’ X 12’ 5’ X 8’ 5’ X 10’ 5’ X 12’
1219.20 X
2438.40mm
1219.20 X
3048.00mm
1219.20 X
3657.60mm
1524.00 X
2438.40mm
1524.00 X
3048.00mm
1524.00 X
3657.60mm
THICKNESS (mm) WEIGHT (Kg / Pc)
1 7.97 9.96 11.95 9.96 12.45 14.94
1.2 9.56 11.95 14.34 11.95 14.94 17.93
1.5 11.95 14.94 17.93 14.94 18.67 22.41
2 15.93 19.92 23.90 19.92 24.90 29.88
2.3 18.32 22.91 27.49 22.91 28.63 34.36
2.5 19.92 24.90 29.88 24.90 31.12 37.35
3 23.90 29.88 35.85 29.88 37.35 44.82
4 31.87 39.84 47.80 39.84 49.80 59.76
4.5 35.85 44.82 53.78 44.82 56.02 67.22
5 39.84 49.80 59.76 49.80 62.25 74.69
6 47.80 59.76 71.71 59.76 74.69 89.63
7 55.77 69.71 83.66 69.71 87.14 104.57
8 63.74 79.67 95.61 79.67 99.59 119.51
9 71.71 89.63 107.56 89.63 112.04 134.45
9.53 75.93 94.91 113.89 94.91 118.64 142.37
10 79.67 99.59 119.51 99.59 124.49 149.39
12 95.61 119.51 143.41 119.51 149.39 179.27
12.7 101.19 126.48 151.78 126.48 158.10 189.72
15 119.51 149.39 179.27 149.39 186.74 224.08
15.8 125.88 157.36 188.83 157.36 196.69 236.03
16 127.48 159.35 191.22 159.35 199.18 239.02
18 143.41 179.27 215.12 179.27 224.08 268.90
20 159.35 199.18 239.02 199.18 248.98 298.78
Items that are highlighted and in bold are stock items. Please contact us to find out about other sizes as well as stock availability.
All weights as shown are based on a theoratical calculation and actual weights might vary.
Density=2.68g/cm3
108
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
ALUMINIUM SHEET 5083
When aluminium is passed between rolls under
pressure, it becomes thinner and longer in the
direction in which it is moving. This simple process
is the basis for producing aluminium plates, sheets
and foils of a variety of sizes and thicknesses.
The most common form of industrial aluminium,
sheet aluminium is widely utilised in aerospace,
transportation, packaging and construction. Sheet
aluminium can be colour-anodised to black, gold, red,
blue and hundreds of other colours. It can be etched
to a matte finish, polished to a sparkling brightness, or
textured and painted to resemble wood.
W
L
T
109
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
ALUMINIUM SHEET 5083
DIMENSION (WxL)
4’ X 8’ 1.5 x 6.0m 2.0 x 6.0m 4’ X 10’ 4’ X 12’ 5’ X 8’ 5’ X 10’
1219.20 X
2438.40mm
1500.00 X
6000.00mm
2000.00 X
6000.00mm
1219.20 X
3048.00mm
1219.20 X
3657.60mm
1524.00 X
2438.40mm
1524.00 X
3048.00mm
THICKNESS (mm) WEIGHT (Kg / Pc)
3 23.72 71.82 95.76 29.65 35.59 29.65 37.07
4 31.63 95.76 127.68 39.54 47.45 39.54 49.42
4.5 35.59 107.73 143.64 44.48 53.38 44.48 55.60
5 39.54 119.70 159.60 49.42 59.31 49.42 61.78
6 47.45 143.64 191.52 59.31 71.17 59.31 74.14
7 55.36 167.58 223.44 69.19 83.03 69.19 86.49
8 63.26 191.52 255.36 79.08 94.89 79.08 98.85
9 71.17 215.46 287.28 88.96 106.76 88.96 111.20
9.53 75.36 228.15 304.20 94.20 113.04 94.20 117.75
10 79.08 239.40 319.20 98.85 118.62 98.85 123.56
12 94.89 287.28 383.04 118.62 142.34 118.62 148.27
12.7 100.43 304.04 405.38 125.54 150.65 125.54 156.92
15 118.62 359.10 478.80 148.27 177.93 148.27 185.34
15.8 124.94 378.25 504.34 156.18 187.42 156.18 195.23
16 126.53 383.04 510.72 158.16 189.79 158.16 197.70
18 142.34 430.92 574.56 177.93 213.51 177.93 222.41
20 158.16 478.80 638.40 197.70 237.24 197.70 247.12
25.4 200.86 608.08 810.77 251.08 301.29 251.08 313.85
Items that are highlighted and in bold are stock items. Please contact us to find out about other sizes as well as stock availability.
All weights as shown are based on a theoratical calculation and actual weights might vary.
Density=2.66g/cm3
110
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
ALUMINIUM COIL
Aluminium sheet ingots are passed between rolls
under pressure, it then becomes thinner and longer
in the direction it is moving. Instead of being cut into
the standard sizes, the aluminium sheet is produced
as a long sheet with a fixed width and rolled into a
coil. The end users mount them on slitting machines
that cut the sheets to their desired lengths.
W
111
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
WIDTH
4’ 5’
CUSTOMISED WIDTHS1219.20mm 1524.00mm
THICKNESS
0.5mm
TO BE OrDErED By INDENT, BASED ON MINIMUM OrDEr QUANTITy AND rEQUIrEMENT
0.6mm
0.6mm
0.8mm
0.9mm
1.0mm
1.5mm
2.0mm
3.0mm
Coils of various thickness and widths have to be ordered by indent and quoted separately.
Aluminium Coils are sold by per coil unit, partial order of a coil is not available for sale.
Slitting and Shearing charges are billed seperately. Standard Coil usually weigh about 2.0, 2.5, 5.0, 6.0 tons.
The weight and length of each coil will vary.
Please contact us to find out about the size and weight of coils as well as stock availability.
ALUMINIUM COIL
112
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
CHECKEr / TrEAD PLATE
Checker Plate bears the distinctive diamond
patterns of raised marks on its surface and it comes
in a variety of thicknesses. It is lightweight but
robust, easy to clean and non-skid. Also, its pattern
provides good slip resistance. This combination
of properties makes it popular for applications
such as truck beads, kick plates, work surfaces and
wall coverings. It is also often used for industrial
walkways, ramps and stairs. Having good forming,
drilling and welding ability, it is easy to fabricate.
W
L
T
113
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
CHECKEr / TrEAD PLATE
W (mm) L (mm) T (mm) GRADE TEMPER WEIGHT (kg/pc) FINISH
1219.20 2438.40 1.50/1.80 1100 H14 13.068 Mill Finish
1219.20 2438.40 2.00/2.70 1100 H14 18.903 Mill Finish
1219.20 2438.40 2.70/3.00 1100 H14 26.672 Mill Finish
1219.20 2438.40 4.20/4.50 1100 H14 37.845 Mill Finish
1219.20 2438.40 5.40/6.00 1100 H14 52.671 Mill Finish
1219.20 3657.60 2.70/3.00 1100 H14 40.007 Mill Finish
1219.20 3657.60 4.20/4.50 1100 H14 56.699 Mill Finish
1219.20 3657.60 5.40/6.00 1100 H14 79.006 Mill Finish
1524.00 3048.00 2.70/3.00 1100 H14 37.757 Mill Finish
1524.00 3048.00 4.20/4.50 1100 H14 61.775 Mill Finish
1524.00 3048.00 5.40/6.00 1100 H14 82.368 Mill Finish
1640.00 3950.00 2.70/3.00 1100 H14 58.169 Mill Finish
Tread size and patterns are dependent on batch sold.
Thickness in the description is inclusive of the tread and pattern thickness.
All weights as shown are based on a theoratical calculation and actual weights might vary.
Please contact us to find out about other sizes as well as stock availability.
114
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
PErFOrATED SHEETS
Perforated sheets are created by punching regular
flat sheets with a predetermined pattern. There are
myriad different applications in which perforated
sheets can be used. With its pleasing aesthetics, it
can be used in architectural and design applications
such as facades, fixtures and privacy panels.
Other applications include screens, filters, shields
and guards. In additional, perforated sheets can
control the passage of air, liquid, light, solids, heat,
electromagnetic waves and sound waves.
W
L
T
115
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
PErFOrATED SHEETS
SECTION NO. W (mm) L (mm) T (mm) DIAMETER (mm) PITCH (mm) OPENING (%) FINISH
PS0001 1219.20 2438.40 0.40 3.00 5.00 32.64 Mill Finish
PS0002 1219.20 2438.40 0.40 5.00 8.00 35.40 Mill Finish
PS0003 1219.20 2438.40 0.50 3.00 5.00 32.64 Mill Finish
PS0004 1219.20 2438.40 0.50 5.00 8.00 35.40 Mill Finish
PS0005 1219.20 2438.40 0.60 3.00 5.00 32.64 Mill Finish
PS0006 1219.20 2438.40 0.60 5.00 8.00 35.40 Mill Finish
PS0007 1219.20 2438.40 0.70 3.00 5.00 32.64 Mill Finish
PS0008 1219.20 2438.40 0.70 5.00 8.00 35.40 Mill Finish
PS0009 1219.20 2438.40 0.80 3.00 5.00 32.64 Mill Finish
PS0010 1219.20 2438.40 0.80 5.00 8.00 35.40 Mill Finish
PS0011 1219.20 2438.40 1.00 3.00 5.00 32.64 Mill Finish
PS0012 1219.20 2438.40 1.00 5.00 8.00 35.40 Mill Finish
PS0013 1219.20 2438.40 1.20 3.00 5.00 32.64 Mill Finish
PS0014 1219.20 2438.40 1.20 5.00 8.00 35.40 Mill Finish
PS0015 1219.20 2438.40 1.50 3.00 5.00 32.64 Mill Finish
PS0016 1219.20 2438.40 1.50 5.00 8.00 35.40 Mill Finish
PS0017 1219.20 2438.40 2.00 3.00 5.00 32.64 Mill Finish
PS0018 1219.20 2438.40 2.00 5.00 8.00 35.40 Mill Finish
PS0019 1219.20 2438.40 3.00 3.00 5.00 32.64 Mill Finish
PS0020 1219.20 2438.40 3.00 5.00 8.00 35.40 Mill Finish
PS0021 1524.00 3048.00 1.00 3.00 5.00 32.64 Mill Finish
PS0022 1524.00 3048.00 1.00 5.00 8.00 35.40 Mill Finish
PS0023 1524.00 3048.00 1.50 3.00 5.00 32.64 Mill Finish
PS0024 1524.00 3048.00 1.50 5.00 8.00 35.40 Mill Finish
PS0025 1524.00 3048.00 2.00 3.00 5.00 32.64 Mill Finish
PS0026 1524.00 3048.00 2.00 5.00 8.00 35.40 Mill Finish
PS0027 1524.00 3048.00 3.00 3.00 5.00 32.64 Mill Finish
Items highlighted in bold are in stock
Perforated sheets are customisable by punching depending on the availability of tooling equipment
116
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
60° pitch turned by 30° changes direction of perforation
60° Staggered Pitch
90° Square Pitch
30°
Dir
ecti
on o
f pe
rfor
atio
n
∅
Direction of perforation
60°
90°
∅
PErFOrATED SHEETS
117
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
© 2018 TC Aluminium All Rights ReservedAll products are subject to standard production tolerances.
45° Pitch
Rectangular Pitch
Random Perforations
45° 45°
118
ALU
MIN
IUM
SH
EET
S, C
OIL
S A
ND
PL
AT
ES
FEATUrED PrOJECTS
Solaris, Fusionopolis
Trilight Condominium
CleanTech One
Solar Park, Marina Barrage
OTHEr PrOJECTS
Commercial / residential Buildings
1. The Metropolis
2. Esparina residences
3. Sentosa Green
4. The Foresta
5. Marina One
6. Esplanade
7. Changi Airport
8. Coca-Cola
9. Starhub Media Hub
10. eCO
Schools
1. CHIJ St. Nicholas Secondary School
2. Temasek Polytechnic
3. Singapore University of Technology & Design
4. Nanyang Technological University
Transportation
1. Batam Passenger Ferry
2. Passenger Buses
Events
1. Formula 1
2. Marina Bay Sands – Christmas Wonderland
FEA
TU
rE
D P
rO
JEC
TS
* Project involvment includes supply of materials only
Solaris, Fusionopolis
Solaris, Fusionopolis
Solaris, Fusionopolis
Solaris, FusionopolisApplication: FaÇade & Interior
Trilight Condominium
Offictatempos pernatur sam reperci ius orepedi sae niatios sim doluptiuae niatios
sim doluptium deligen.
“
”
Trilight CondominiumApplication: Exterior
CleanTech One
CleanTech OneApplication: Perforated Panels
Solar Park, Marina BarrageApplication: Solar Panels Frame
Solar Park, Marina Barrage
Passenger FerryMarine Hawk 2
Forging Singapore & Global LandscapesThe Name in Aluminium — Quality, Integrity, Excellence.
Copyright © 2018 by TC Aluminium Pte Ltd / Teck Cheong Aluminium Pte Ltd
All rights reserved. All trademarks mentioned herein belong to their respective owners. No part of
this publication may be reproduced, distributed, or transmitted in any form or by any means, including
photocopying, recording, or other electronic or mechanical methods, without the prior written permission
of the publisher, except in the case of brief quotations embodied in critical reviews and certain other
noncommercial uses permitted by copyright law. For permission requests, write to the publisher,
addressed “Attention: Permissions Coordinator,” at the address below.
All drawings might not be drawn to scale. All information and drawings are accurate at the time of printing
and are subject to change without notice. To the maximum extent permitted by law, the company is not liable
to any party for any direct, indirect, special or other consequential damages for any use of this catalogue or
any other linked data, including, without limitation, any lost profits business interruption, loss of programs
or other data on your information handling system, reputation or opportunity, in contract, tort or otherwise
arising in connection with a contract even if we are expressly advised of the possibility of such damage.
TC Aluminium Pte Ltd
803 King George's Avenue, #01-246/248/250, Singapore 2000803
+65 6294 9650
aluminium@tcaluminium.com
www.tcaluminium.com
Des
ign
and
art
dir
ecti
on
by P
OP
folio
top related