tpm total productive maintenance
Post on 09-Jan-2017
176 Views
Preview:
TRANSCRIPT
TOTAL PRODUCTIVE MAINTENANCE
KULDEEP MATHURM.B.A. JIWAJI UNIVERSITY GWALIOR
1
1. About TPM1. About TPMA company-wide team-based effort to
build quality into equipment and to improve overall equipment effectiveness
Total◦ all employees are involved◦ it aims to eliminate all accidents, defects and breakdowns
Productive◦ actions are performed while production goes on◦ troubles for production are minimized
Maintenance◦ keep in good condition◦ repair, clean, lubricate
2
1. Other Definition1. Other DefinitionTPM combines the traditional
American practice of preventive maintenance with Total Quality Control and Total Employee Involvement, to create a culture where operators develop ownership of their equipment, and become full partners with Maintenance, Engineering and Management to assure equipment operates properly everyday.
3
1a. Other Explanations of 1a. Other Explanations of TPMTPM
TPM brings maintenance into focus as a necessary and vitally important part of the business. It is no longer regarded as a non-profit activity.
Down time for maintenance is scheduled as a part of the manufacturing day and, in some cases, as an integral part of the manufacturing process. It is no longer simply squeezed in whenever there is a break in material flow. The goal is to hold emergency and unscheduled maintenance to a minimum.
4
2. Origins of TPM2. Origins of TPMTPM evolved from TQM, Dr. Deming introduced statistical
analysis and used the resulting data to control quality during manufacturing (TQM)
The Japanese imported preventive maintenance (PM) from the united states in the 1950s and it remained well established until the 1970s. This consisted mainly of time-based maintenance featuring periodic servicing and overhaul. During the 1980s PM was steadily replaced by predictive maintenance, or condition-based maintenance
Some general concepts of TQM did not work well in the maintenance environment. There was little or no involvement of the machine operator in the maintenance program and maintenance personnel had little training beyond what was contained in often inadequate maintenance manuals.
5
2. Origins of TPM (Cont.)2. Origins of TPM (Cont.) The need to go further than preventive maintenance
was quickly recognized by those companies who were committed to TQM
The origin of the term "Total Productive Maintenance" is disputed. Some say that it was first coined by American manufacturers over forty years ago. Others contribute its origin to a maintenance program used in the late 1960's by Nippondenso, a Japanese manufacturer of automotive electrical parts. Seiichi Nakajima, an officer with the Institute of Plant Maintenance in Japan is credited with defining the concepts of TPM and seeing it implemented in hundreds of plants in Japan.
TPM is defined as productive maintenance involving total participation - a kind of marriage between PM and TQM, Maintenance became an integral part of TQM in the early 90’s.
6
3. TPM principles3. TPM principlesIncrease Overall Equipment Effectiveness
(OEE)Improve existing planned maintenance
systemsThe operator is the best condition monitorProvide training to upgrade operations and
maintenance skillsInvolve everyone and utilize cross-functional
teamwork 7
4. TPM Goal (1)4. TPM Goal (1)TPM aims to establish good maintenance practice through the
pursuit of "the five goals of TPM”
(1) Improve equipment effectiveness: examine the effectiveness of facilities by identifying and examining all losses which occur - downtime losses, speed losses and defect losses.
(2) Achieve autonomous maintenance: allow the people who operate equipment to take responsibility for, at least some, of the maintenance tasks. This can be at :◦ the repair level (where staff carry out instructions in response to a
problem);
◦ the prevention level (where staff take pro-active action to prevent foreseen problems); and the
◦ improvement level (where staff not only take corrective action but also propose improvements to prevent recurrence). 8
4. TPM Goal (2)4. TPM Goal (2)(3) Planed maintenance: have a systematic approach to all maintenance activities.
This involves the identification of the nature and level of preventive maintenance required for each piece of equipment, the creation of standards for condition-based maintenance, and the setting of respective responsibilities for operating and maintenance staff. The respective roles of "operating" and "maintenance" staff are seen as being distinct. Maintenance staff are seen as developing preventive actions and general breakdown services, whereas operating staff take on the "ownership" of the facilities and their general care. Maintenance staff typically move to a more facilitating and supporting role where they are responsible for the training of operators, problem diagnosis, and devising and assessing maintenance practice. 9
4. TPM Goal (3)4. TPM Goal (3)(4) Train all staff in relevant maintenance skills:
◦ The defined responsibilities of operating and maintenance staff require that each has all the necessary skills to carry out these roles.
◦ TPM places a heavy emphasis on appropriate and continuous training.
(5) Achieve early equipment management:
◦ The aim is to move towards zero maintenance through "maintenance prevention" (MP).
◦ MP involves considering failure causes and the maintainability of equipment during its design stage, its manufacture, its installation, and its commissioning.
◦ As part of the overall process, TPM attempts to track all potential maintenance problems back to their root cause so that they can be eliminated at the earliest point in the overall design, manufacture and deployment process. 10
Objective of TPMObjective of TPM
11
• Zero accidents• Zero defects• Zero downtime• Zero failures• Zero losses• Zero delays• Zero overtime• Zero …….
Similarities between TQM and Similarities between TQM and TPM TPM
The TPM program closely resembles the popular Total Quality Management (TQM) program. Many of the tools such as employee empowerment, benchmarking, documentation, etc. used in TQM are used to implement and optimize TPM. Following are the similarities between the two. ◦ Total commitment to the program by upper level management is required in both programs ◦ Employees must be empowered to initiate corrective action, and ◦ A long range outlook must be accepted as TPM may take a year or more to implement and is an on-going process. Changes in employee mind-set toward their job responsibilities must take place as well.
12
Differences between TQM Differences between TQM and TPM and TPM
13
Category TQM TPM
Object Quality ( Output and effects )
Equipment ( Input and cause )
Means of attaining goal
Systematize the management. It is software oriented
Employees participation and it is hardware oriented
Target Quality for PPM Elimination of losses and wastes.
The Pillars of TPMThe Pillars of TPM
14
Planned Maintenance
5S
Total Employee Participation
Jishu Hozen
Kobetsu K
aizen
Training & D
evelopment
Office TPM
Safety ,Health &
Environment
TOTAL PRODUCTIVE MAINTENANCE
Quality M
aintenance
TPM Plant StructureTPM Plant Structure
15
5. TPM implementation5. TPM implementation3 requirements for fundamental improvement3 requirements for fundamental improvement
Increasing motivation: changing peoples attitudes
Increasing competency and peoples skills
Improving the work environment, so that it supports the establishment of a program for implementing TPM
16
5. TPM Implementation5. TPM Implementation12 steps12 steps
17
Preparation
Kick-off
Implementation
1.Announcement to introduce TPM2.Introductory education campaign for the workforce
3.TPM Promotion (special committees)
4.Establish basic TPM policies and goals5.Preparation and Formulation of a master plan
7.Develop an equipment management program8.Develop a planned maintenance program
9.Develop an autonomous maintenance program10.Increase skills of production and maintenance personnel
12.Perfect TPM implementation and raise TPM levelsStabilization
11.Develop early equipment management program
6.Invite customers, affiliated companies and subcont.
5. TPM Implementation 5. TPM Implementation Process Process flowflow
18
• Train and Introduce• Promotion Office• Policies and Targets• Prepare Master Plan
• Education• Quality• Office• Safety
6. Benefits of Total Productive 6. Benefits of Total Productive MaintenanceMaintenance
TPM reduces equipment-related waste including: downtime, speed losses, defects, frequent adjustments, breakdowns, etc. Typical manufacturing operations have experienced improvements in the following areas in a relatively short period of time (6-12 months) through the implementation of TPM:
Overall Equipment Effectiveness (capacity) improvement of 25-50%.◦ Quality improvement of 25-50%◦ Maintenance expenditure reductions of 10-50%◦ Percent Planned vs. Unplanned maintenance increase of 10-60%◦ Increased equipment productivity◦ Reduced equipment downtime◦ Increased plant capacity◦ Lower maintenance and production costs◦ Approaching zero equipment-caused defects◦ Enhanced job satisfaction◦ Increased Return On Investment
19
The Results of TPM The Results of TPM Ford, Eastman Kodak, Dana Corp., Allen Bradley, Harley Davidson, M&M, Sundram Fasteners, Maruti, Tata Motors; these are just a few of the companies that have implemented TPM successfully. All report an increase in productivity using TPM. Kodak reported that a $5 million investment resulted in a $16 million increase in profits which could be traced and directly contributed to implementing a TPM program. One appliance manufacturer reported the time required for die changes on a forming press went from several hours down to twenty minutes! This is the same as having two or three additional million dollar machines available for use on a daily basis without having to buy or lease them. Texas Instruments reported increased production figures of up to 80% in some areas. Almost all the above named companies reported 50% or greater reduction in down time, reduced spare parts inventory, and increased on-time deliveries. The need for out-sourcing part or all of a product line was greatly reduced in many cases.
20
Conclusion Conclusion Today, with competition in industry at an all time high, TPM
may be the only thing that stands between success and total failure for some companies. It has been proven to be a program that works. It can be adapted to work not only in industrial plants, but in construction, building maintenance, transportation, and in a variety of other situations.
Employees must be educated and convinced that TPM is not just another "program of the month" and that management is totally committed to the program and the extended time frame necessary for full implementation. If everyone involved in a TPM program does his or her part, an unusually high rate of return compared to resources invested may be expected.
21
22
PILLAR 1 - Autonomous Maintenance PILLAR 1 - Autonomous Maintenance (Jishu Hozen)(Jishu Hozen)
JH is about automatic response in maintaining the machine’s basic condition.
Geared towards developing operators to be able to take care of small maintenance tasks.
Policy:
Uninterrupted operation of equipments. Flexible operators to operate and maintain other equipments. Eliminating the defects at source through active employee
participation.
JISHU HOZEN Targets:
Reduce process time by 50% Increase use of JH by 50%
23
PILLAR 1 - Autonomous Maintenance PILLAR 1 - Autonomous Maintenance (Jishu Hozen – Contd.) (Jishu Hozen – Contd.)
7 steps are implemented to progressively increase operators knowledge, participation and responsibility for their equipment.1. Perform initial cleaning and inspection2. Countermeasures for the causes and effects of dirt and dust3. Establish cleaning and lubrication standards4. Conduct general inspection training5. Carry out equipment inspection checks6. Workplace management and control7. Continuous improvement
24
PILLAR 2 -PILLAR 2 - Equipment and process Equipment and process improvement improvement (Kobetsu Kaizen) (Kobetsu Kaizen)
This pillar is aimed at reducing losses in the workplace that affect the efficiencies. By using a detailed and thorough procedure it eliminate losses in a systematic method using various Kaizen tools.
Basically kaizen is for small improvements.
These activities are not limited to production areas and can be implemented in administrative areas as well.
Kaizen Policy :
Practice concepts of zero losses in every activity. To achieve cost reduction targets in all resources To improve over all plant equipment effectiveness.
Kaizen Target :
To achieve and sustain zero loses with respect to minor stops, measurement and adjustments, defects and downtimes. 25
Tools used in Kaizen Tools used in Kaizen
PM analysis Why - Why analysis Summary of losses Kaizen register Kaizen summary sheet
26
PILLAR 3 - PILLAR 3 - Planned maintenancePlanned maintenance It is aimed to have trouble free machines and
equipments producing defect free products for total customer satisfaction.
Policy :◦ Achieve and sustain availability of machines ◦ Optimum maintenance cost. ◦ Reduces spares inventory. ◦ Improve reliability and maintainability of machines.
Target :◦ Zero equipment failure and break down. ◦ Improve reliability and maintainability by 50 %
27
PILLAR 3 - PILLAR 3 - Planned maintenance (cont’d)Planned maintenance (cont’d) Six steps in Planned maintenance :
◦ Equipment evaluation and recoding present status.
◦ Restore deterioration and improve weakness.
◦ Building up information management system.
◦ Prepare time based information system, select equipment, parts and members and map out plan.
◦ Prepare predictive maintenance system by introducing equipment diagnostic techniques and
◦ Evaluation of planned maintenance. 28
PILLAR 4 PILLAR 4 –– Quality Maintenance ( Quality Maintenance (Hinshitsu Hinshitsu Hozen)Hozen)
Objective• to set and maintain conditions to accomplish zero defects.• Perfect equipment produce perfect parts!• The condition are checked and measure in time series to verify that measure values are within standard values to prevent defects.
Policy Defect free conditions and control of equipments. Focus on prevention of defects at source Effective implementation of operator quality assurance.
Target Achieve and sustain customer complaints at zero Reduce cost of quality by 50 %.
29
Pillar 5: 5S - SEIRI - Sort out Pillar 5: 5S - SEIRI - Sort out
To sort and organized items as critical, important, frequently used items, useless, or items that are not need as of now.
Critical items to be kept for use nearby and items that are not be used in near future, should be stored in some place.
30
SEITON - Organise SEITON - Organise
Items shall be placed back after usage at the same place. The concept is "Each items has a
place, and only one place".For easily identify, name plates and colored tags has to be used for the items. Vertical racks can be used for this purpose, and heavy items occupy the bottom position in the racks.
31
SEISO - Shine the workplaceSEISO - Shine the workplace This involves cleaning the work
place free of burrs, grease, oil, waste, scrap etc.
No loosely hanging wires or oil leakage from machines.
32
SEIKETSU - StandardizationSEIKETSU - Standardization
Employees need to discuss together and decide on standards for keeping the work place / Machines / pathways neat and clean.
This standards are implemented for the whole organization and are tested / Inspected randomly.
33
SHITSUKE - Self disciplineSHITSUKE - Self discipline This includes wearing badges,
following work procedures, punctuality, dedication to the organization etc.
Considering 5S as a way of life and bring about self-discipline among the employees of the organization.
34
PILLAR 6 - EDUCATION AND TRAININGPILLAR 6 - EDUCATION AND TRAINING
Education is given to operators to upgrade their skill. It is not sufficient know only "Know-How" They should also learn "Know-why". The employees should be trained to achieve the four phases
of skill. The goal is to create a factory full of experts.
◦ Phase 1 : Do not know.Phase 2 : Know the theory but cannot do.Phase 3 : Can do but cannot teachPhase 4 : Can do and also teach.
35
con’tcon’t
Policy :1. Focus on improvement of knowledge, skills and
techniques. 2. Creating a training environment for self learning
based on felt needs. 3. Training curriculum / tools /assessment etc
conductive to employee revitalization 4. Training to remove employee fatigue and make
work enjoyable.
36
CON’TCON’T
Target :1. Achieve and sustain downtime due to want
of men at zero on critical machines. 2. Achieve and sustain zero losses due to lack
of knowledge / skills / techniques 3. Aim for 100 % participation in suggestion
scheme.
37
CON’TCON’T
Steps in Educating and training activities :1. Setting policies and priorities and checking present status of
education and training. 2. Establish of training system for operation and maintenance
skill up gradation. 3. Training the employees for upgrading the operation and
maintenance skills. 4. Preparation of training calendar. 5. Kick-off of the system for training. 6. Evaluation of activities and study of future approach.
38
PILLAR 7 - OFFICE TPMPILLAR 7 - OFFICE TPM
Office TPM should be started after activating four other pillars of TPM to improve productivity, efficiency in the administrative functions and identify and eliminate losses.
Processing loss Communication loss Set-up loss
39
CON’TCON’T
How to start office TPM ?
TPM co-ordinate plans and guides the sub committee.
1. Providing awareness about office TPM to all support departments
2. Identify the scope for improvement in each function
3. Collect relevant data
40
CON’TCON’T
5. Help them to solve problems in their circles
6. Make up an activity board where progress is monitored on both sides - results and actions along with Kaizens.
7. Fan out to cover all employees and circles in all functions.
41
CON’TCON’T
Office TPM and its Benefits :
1. Involvement of all people in support functions for focusing on better plant performance
2. Better utilized work area 3. Reduce repetitive work 4. Reduced inventory levels in all parts of the supply chain 5. Reduced administrative costs 6. Reduced inventory carrying cost
42
PILLAR 8 - SAFETY, HEALTH AND ENVIRONMENTPILLAR 8 - SAFETY, HEALTH AND ENVIRONMENT Target :1. Zero accident, 2. Zero health damage 3. Zero fires. In this area focus is on to create a safe workplace and a
surrounding area that is not damaged by our process or procedures.
This pillar will play an active role in each of the other pillars on a regular basis.
43
CON’TCON’T
A committee is constituted for this pillar which comprises representative of officers as well as workers.
The committee is headed by Senior vice President (Technical ).
Manager (Safety) is looking after functions related to safety.
To create awareness among employees various competitions like safety slogans, Quiz, Drama, Posters, etc. related to safety can be organized at regular intervals.
44
5. TPM Implementation5. TPM Implementation5.1. Announce top management’s decision to 5.1. Announce top management’s decision to introduce TPMintroduce TPM
State TPM objectives in a company notice board information/company newsletter to inform all employees.
Place articles on TPM in the company
bulletins.
45
5. TPM Implementation5. TPM Implementation5.2. Introductory education campaign5.2. Introductory education campaign
Seminars for managersSlide presentations for all employees
46
5. TPM Implementation5. TPM Implementation5.3. TPM Promotion5.3. TPM Promotion
Special committees at every level to promote TPM
NewslettersArticlesVideosPosters
47
5. TPM Implementation5. TPM Implementation5.4. Establish basic TPM policies and goals5.4. Establish basic TPM policies and goals
Analyze existing conditionsSet goalsPredict results
48
5. TPM Implementation5. TPM Implementation5.5. Preparation and Formulation of a master plan5.5. Preparation and Formulation of a master plan
A master plan lays out your goals, what you will do to achieve them and when you will achieve them
Detailed plans for each pillar have to be prepared
49
5. TPM Implementation5. TPM Implementation5.6. TPM kick-off5.6. TPM kick-off
The main kick-off to TPM should take the form of a formal presentation with all the employees attending
This opportunity can be used to gain the full support of the employees
Invite external customers, affiliated and subcontracting companies
50
5. TPM Implementation5. TPM Implementation5.7. Develop an equipment management 5.7. Develop an equipment management program (1)program (1)The tools of Total Quality Management
and Continuous Improvement are applied to the management and improvement of equipment
Form project teamsSelect model equipment
◦ identify equipment problems◦ analyze equipment problems◦develop solutions and proposals for
improvement51
5. TPM Implementation5. TPM Implementation5.7. Develop an equipment management 5.7. Develop an equipment management program (2)program (2)Typical membership of a team
five to seven operatorsa maintenance persona technical expert
ToolsParetoCause & effectRoot causeMethods Analysis
52
5. TPM Implementation5. TPM Implementation5.8. Develop a planned maintenance program5.8. Develop a planned maintenance program
Set up plans and schedules to carry out work on equipment before it breaks down, in order to extend the life of the equipment
Include periodic and predictive maintenance
Include management of spare parts and tools
53
5. TPM Implementation5. TPM Implementation 5.9. Develop a autonomous maintenance program5.9. Develop a autonomous maintenance program A handing-over of maintenance tasks from
specialized maintenance personnel to production operators
Promote the seven stepsTasks to hand over
cleaninglubricatinginspectingset-up and adjustment
54
5. TPM Implementation5. TPM Implementation5.10. Increase skills of production and maintenance 5.10. Increase skills of production and maintenance personnelpersonnelThe training sessions must be
planned shortly after the kick-off presentation.
2 major components◦ soft skills training◦ technical training
Train leaders togetherHave leaders share information
with group members55
5. TPM Implementation5. TPM Implementation5.11. Develop early equipment management 5.11. Develop early equipment management program(1)program(1)
The principle of designing for maintenance prevention can be applied to new products, and to new and existing machines.
New products must be designed so that they can be easily produced on new or existing machines
New machines must be designed for easier operations, changeover and maintenance
56
5. TPM Implementation5. TPM Implementation5.11. Develop early equipment management 5.11. Develop early equipment management program(2)program(2)
Existing machines:◦analyze historical records for
trends of types of failures frequency of component failures root causes of failures
◦ determine how to eliminate the problem and reduce maintenance through an equipment design change or by changing the process
57
5. TPM Implementation5. TPM Implementation5.12. Perfect TPM implementation and raise 5.12. Perfect TPM implementation and raise TPM levelsTPM levels
Evaluate for the PM Award: The Japanese Institute for Productive Maintenance runs the annual PM Excellence Award. They provide a checklist for companies applying for the award.
Set higher goals58
top related