trapezoidal screw drives gttgt - getotec...gewindeausführung : gerollte trapezgewindespindeln iso...
Post on 25-Feb-2020
3 Views
Preview:
TRANSCRIPT
Trapezoidal screw drives GTTGT
www.getotec.de
© All rights reserved.Reprinting, in whole or in part, is not permitted without our approval.
Note:We always strive to ensure that the contents of our publications are of the highestquality.However, although the greatest care is exercised in this regard, we cannot warrantor accept liability for the accuracy, up-to-date status or completeness of the contentand information in this catalog.We reserve the right to update the contentand the technical characteristics of theproducts in this catalog at any time.
GETOtec
Schwindstraße 9D-80798 München
Telefon: +49 (0)89 954164 10Telefax: +49 (0)89 954164 11
info@getotec.dewww.getotec.de
1 Ordering key 4
1.1 Trapezoidal threaded spindles 4
1.2 Trapezoidal threaded nuts 5
2 Trapezoidal threaded spindles 6
2.1 Trapezoidal threaded spindle TSP 6
2.2 Trapezoidal threaded spindle TSS 8
2.3 Trapezoidal threaded spindle TES 10
3 Trapezoidal threaded nuts 12
3.1 Trapezoidal threaded nut FBR 12
3.2 Trapezoidal threaded nut RLR 14
3.3 Trapezoidal threaded nut RKS 15
3.4 Trapezoidal threaded nut RLS 16
3.5 Trapezoidal threaded nut SKS 17
Content
1.1 Trapezoidal threaded spindles
GTTGT TSP 10x4-P2 1000 RG C
1 2 3 4 5 6
Code Description
1 Type GTTGT -
2 Spindle type TSP -
3 Size 10x4-P2 Diameter x Pitch
4 Thread length 1000 in mm
5 Thread direction RG, LGRG: right-hand threadLG: left-hand thread
6 Customized C, 0C: Editing according to drawing0: Standard
4
Trapezoidal screw drives GTTGT
1 Ordering key
1.2 Trapezoidal threaded nuts
GTTGT SSK 10x2 EG RG C
1 2 3 4 5 6
Code Description
1 Type GTTGT -
2 Nut type SSK -
3 Size 10x2 Diameter x Pitch
4 Number of thread start EG, ZGEG: Single startZG: Two start
5 Thread direction RG, LGRG: right-hand threadLG: left-hand thread
6 Customized CEditing of nut according to drawing
5
6
Trapezoidal screw drives GTTGT
2 Trapezoidal threaded spindles
2.1 Trapezoidal threaded spindle TSP
• Type of thread: rolled
• Material: C35E / C45E
• Norm: ISO 2901/2903 und DIN 103
• Tolerance: 7e
• Total length: - up to Ø 28 mm, 3.000 mm - as of Ø 30 mm, 3.000 mm and 6.000 mm
These precision threaded spindles are for mechanical applications for transmission.
They are made of C35E/C45E which makes it possible to obtain better performances in use and also better machining conditions.
On request we can supply spindles cut to length and also machined according to your dra-wings.
Our spindles are carefully packed in wooden boxes to protect them during transport and thus preserve their quality.
Français 2012:Montage OK 05.2002 F 27/08/12 14:57 Page3
V1 02 12
Gerollte Trapezgewindespindel RPTS aus C35E / C45E nach ISO 2901/2903 und DIN 103 Toleranz 7e.
Diese Präzisions-Trapezgewindespindeln finden Ihre Verwendung in allen Bereichen der Antriebstechnik. Durch den Einsatz von C35E/C45E verfügen unsere Produkte über bessere mechanische Eigenschaften und sind besonders gut zu bearbeiten. Gewindeausführung : Gerollte Trapezgewindespindeln ISO 2901/2902 und DIN 103 Toleranz 7e. Alle aufgeführten Produkte sind bis einschließlich Ø 28mm in Herstelllängen von 3000mm lieferbar, alle größeren Durchmesser in Herstelllängen von 3000 mm und 6000 mm. Auf Wunsch liefern wir Ihnen die Gewindespindeln auf Länge geschnitten oder komplett nach Ihren Zeichnungen und Vorgaben bearbeitet. Zum Schutz werden alle Gewindespindeln für den Transport konserviert und sorgsam in Holzkisten verpackt, um so ihre Qualität zu bewahren.
7
Size(Tr)
Tolerance 7e Max. lead variationµm/300mm
Straightnessmm/300mm
Lead angleWeight
(kg)d maxmm
d minmm
d2 maxmm
d2 minmm
d3 maxmm
d3 minmm
10x2* 10 9,820 8,929 8,739 7,500 6,891 200 0,5 4°07‘ 0,482
10x4-P2 10 9,820 8,929 8,716 7,500 6,891 300 0,5 8°12‘ 0,482
12x3* 12 11,764 10,415 10,191 8,500 7,685 200 0,5 5°17‘ 0,653
12x6-P3 12 11,764 10,415 10,164 8,500 7,685 300 0,5 10°30‘ 0,653
14x3* 14 13,764 12,415 12,191 10,500 9,685 200 0,5 4°26‘ 0,932
14x6-P3 14 13,764 12,415 12,164 10,500 9,685 300 0,5 8°49‘ 0,932
16x4* 16 15,700 13,905 13,640 11,500 10,474 50 0,5 5°16‘ 1,173
16x8-P4 16 15,700 13,905 13,608 11,500 10,474 100 0,5 10°29‘ 1,173
18x4* 18 17,700 15,905 15,640 13,500 12,474 50 0,5 4°36‘ 1,528
18x8-P4 18 17,700 15,905 15,608 13,500 12,474 100 0,5 9°20‘ 1,528
20x4* 20 19,700 17,905 17,640 15,500 14,474 50 0,5 4°05‘ 1,940
20x8-P4 20 19,700 17,905 17,608 15,500 14,474 100 0,5 8°09‘ 1,940
22x5* 22 21,665 19,394 19,114 16,500 15,294 50 0,2 4°43‘ 2,294
22x10-P5 22 21,665 19,394 19,058 16,500 15,294 200 0,3 9°23‘ 2,294
24x5* 24 23,665 21,394 21,094 18,500 17,269 50 0,2 4°17‘ 2,781
24x10-P5 24 23,665 21,394 21,058 18,500 17,269 200 0,3 8°31‘ 2,781
26x5* 26 25,665 23,394 23,094 20,500 19,269 50 0,2 3°55‘ 3,329
26x10-P5 26 25,665 23,394 23,058 20,500 19,269 200 0,3 7°48‘ 3,329
28x5* 28 27,665 25,394 25,094 22,500 21,269 50 0,2 3°36‘ 3,905
28x10-P5 28 27,665 25,394 25,058 22,500 21,269 200 0,3 7°12‘ 3,905
30x6* 30 29,625 26,882 26,547 23,000 21,563 70 0,2 4°05‘ 4,358
30x12-P6 30 29,625 26,882 26,507 23,000 21,563 200 0,3 8°08‘ 4,358
32x6* 32 31,625 28,882 28,547 25,000 23,563 70 0,2 3°48‘ 5,038
32x12-P6 32 31,625 28,882 28,507 25,000 23,563 200 0,3 7°34‘ 5,038
36x6* 36 35,625 32,882 32,547 29,000 27,563 70 0,2 3°20‘ 6,546
36x12-P6 36 35,625 32,882 32,507 29,000 27,563 200 0,3 6°39‘ 6,546
40x7* 40 39,575 36,375 36,020 32,000 30,381 80 0,2 3°31‘ 7,983
40x14-P7 40 39,575 36,375 35,977 32,000 30,381 200 0,3 7°01‘ 7,983
44x7* 44 43,575 40,375 40,020 36,000 34,381 80 0,2 3°10‘ 9,856
44x14-P7 44 43,575 40,375 39,977 36,000 34,381 200 0,3 6°20‘ 9,856
50x8* 50 49,550 45,868 45,468 41,000 39,168 100 0,2 3°11‘ 12,696
55x9 55 54,500 50,360 49,935 45,000 42,979 100 0,2 3°16‘ 15,400
60x9* 60 59,470 55,360 54,935 50,000 47,979 100 0,2 2°58‘ 18,498
70x10* 70 69,470 64,850 64,425 59,000 56,819 100 0,4 2°49‘ 25,627
80x10* 80 79,470 74,850 74,425 69,000 66,819 100 0,4 2°27‘ 34,189
90x12 90 89,400 83,840 83,365 77,000 74,446 200 0,5 2°36‘ 43,000
95x16 95 94,290 86,810 86,250 77,000 73,710 200 1,0 3°22‘ 45,600
100x16 100 99,290 91,810 91,250 82,000 78,710 200 1,0 3°11‘ 51,000
120x16 120 119,290 111,810 111,250 102,000 98,710 200 1,0 2°36‘ 76,000
*Available in left-hand thread
8
2.2 Trapezoidal threaded spindle TSS
• Type of thread: rolled
• Material: C15E
• Norm: ISO 2901/2903 und DIN 103
• Tolerance: 7e
• Total length: 1.000 mm and 3.000 mm
These current quality threaded spindles are for simple applications.
On request we can supply spindle cut to length and also machined according to your dra-wings.
Our bars are carefully packed in wooden boxes to protect them during transport and thus pre-serve their quality.
Trapezoidal screw drives GTTGT
Français 2012:Montage OK 05.2002 F 27/08/12 14:57 Page3
V1 02 12
Gerollte Trapezgewindespindel RTS aus C15E nach ISO 2901/2903 und DIN 103 Toleranz 7e.
Diese gerollten Trapezgewindespindeln sind für einfache Verstellaufgaben bestimmt und sind außerdem schweißbar. Gewindeausführung : Gerollte Trapezgewindespindeln ISO 2901/2902 und DIN 103 Toleranz 7e. Diese Trapezgewindespindeln sind in den Längen 1000mm und 3000mm verfügbar.Auf Wunsch liefern wir Ihnen die Gewindespindeln auf Länge geschnitten oder komplett nach Ihren Zeichnungen und Vorgaben bearbeitet. Zum Schutz werden alle Gewindespindeln für den Transport konserviert und sorgsam in Holzkisten verpackt, um so ihre Qualität zu bewahren.
Max. Steigungs- Geradheits- Steigungs- GewichtBenennung d max d min d2 max d2 min d3 max d3 min abweichung abweichung winkel / m
mm mm mm mm mm mm µm/300mm mm/300mm (Kg)RTS TR10x2 10.000 9.820 8.929 8.739 7.500 6.891 300 1.5 4°07 ' 0.482RTS TR12x3 12.000 11.764 10.415 10.191 8.500 7.685 300 1.5 5°17' 0.653RTS TR14x3 14.000 13.764 12.415 12.191 10.500 9.685 300 1.5 4°26' 0.932RTS TR16x4 16.000 15.700 13.905 13.640 11.500 10.474 300 1.5 5°16' 1.173RTS TR18x4 18.000 17.700 15.905 15.640 13.500 12.474 300 1.5 4°36' 1.528RTS TR20x4 20.000 19.700 17.905 17.640 15.500 14.474 300 1.5 4°05' 1.940RTS TR22x5 22.000 21.665 19.394 19.114 16.500 15.294 300 1.5 4°43' 2.294RTS TR24x5 24.000 23.665 21.394 21.094 18.500 17.269 300 1.5 4°17' 2.781RTS TR26x5 26.000 25.665 23.394 23.094 20.500 19.269 300 1.5 3°55' 3.329RTS TR28x5 28.000 27.665 25.394 25.094 22.500 21.269 300 1.5 3°36' 3.905RTS TR30x6 30.000 29.625 26.882 26.547 23.000 21.563 300 1.5 4°05' 4.358RTS TR32x6 32.000 31.625 28.882 28.547 25.000 23.563 300 1.5 3°48' 5.038RTS TR36x6 36.000 35.625 32.882 32.547 29.000 27.563 300 1.5 3°20' 6.546RTS TR40x7 40.000 39.575 36.375 36.020 32.000 30.381 300 1.5 3°31' 7.983
Toleranz 7e
9
Size(Tr)
Tolerance 7e Max. lead variationµm/300mm
Straightnessmm/300mm
Lead angleWeight
(kg)d maxmm
d minmm
d2 maxmm
d2 minmm
d3 maxmm
d3 minmm
10x2 10 9,820 8,929 8,739 7,500 6,891 300 1,5 4°07‘ 0,482
12x3 12 11,764 10,415 10,191 8,500 7,685 300 1,5 5°17‘ 0,653
14x3 14 13,764 12,415 12,191 10,500 9,685 300 1,5 4°26‘ 0,932
16x4 16 15,700 13,905 13,640 11,500 10,474 300 1,5 5°16‘ 1,173
18x4 18 17,700 15,905 15,640 13,500 12,474 300 1,5 4°36‘ 1,528
20x4 20 19,700 17,905 17,640 15,500 14,747 300 1,5 4°05‘ 1,940
22x5 22 21,665 19,394 19,114 16,500 15,294 300 1,5 4°43‘ 2,294
24x5 24 23,665 21,394 21,094 18,500 17,269 300 1,5 4°17‘ 2,781
26x5 26 25,665 23,394 23,094 20,500 19,269 300 1,5 3°55‘ 3,329
28x5 28 27,665 25,394 25,094 22,500 21,269 300 1,5 3°36‘ 3,905
30x6 30 29,625 26,882 26,547 23,000 21,563 300 1,5 4°05‘ 4,358
32x6 32 31,625 28,882 28,547 25,000 23,563 300 1,5 3°48‘ 5,038
36x6 36 35,625 32,882 32,547 29,000 27,563 300 1,5 3°20‘ 6,546
40x7 40 39,575 36,375 36,020 32,000 30,381 300 1,5 3°31‘ 7,983
10
2.3 Trapezoidal threaded spindles TES
• Type of thread: rolled
• Material: X2CrNiMo17.12.2 (stainless steel V4A)
• Norm: ISO 2901/2903 und DIN 103
• Tolerance: 7e
• Total length: - up to Ø 28 mm, 3.000 mm - as of Ø 30 mm, 3.000 mm and 6.000 mm
These stainless steel-threaded spindles are obtained by rolling and are meant to be used in wet or corrosive environment.
They are made of X2CrNiMo17.12.2 which ensures their resistance to nearly all types of corro-sion.
On request we can supply spindles cut to length and also machined according to your dra-wings.
Our spindles are carefully packed in wooden boxes to protect them during transport and thus preserve their quality.
Trapezoidal screw drives GTTGT
11
Français 2012:Montage OK 05.2002 F 27/08/12 14:57 Page3
V1 02 12
Gerollte Trapezgewindespindel RTS aus C15E nach ISO 2901/2903 und DIN 103 Toleranz 7e.
Diese gerollten Trapezgewindespindeln sind für einfache Verstellaufgaben bestimmt und sind außerdem schweißbar. Gewindeausführung : Gerollte Trapezgewindespindeln ISO 2901/2902 und DIN 103 Toleranz 7e. Diese Trapezgewindespindeln sind in den Längen 1000mm und 3000mm verfügbar.Auf Wunsch liefern wir Ihnen die Gewindespindeln auf Länge geschnitten oder komplett nach Ihren Zeichnungen und Vorgaben bearbeitet. Zum Schutz werden alle Gewindespindeln für den Transport konserviert und sorgsam in Holzkisten verpackt, um so ihre Qualität zu bewahren.
Max. Steigungs- Geradheits- Steigungs- GewichtBenennung d max d min d2 max d2 min d3 max d3 min abweichung abweichung winkel / m
mm mm mm mm mm mm µm/300mm mm/300mm (Kg)RTS TR10x2 10.000 9.820 8.929 8.739 7.500 6.891 300 1.5 4°07 ' 0.482RTS TR12x3 12.000 11.764 10.415 10.191 8.500 7.685 300 1.5 5°17' 0.653RTS TR14x3 14.000 13.764 12.415 12.191 10.500 9.685 300 1.5 4°26' 0.932RTS TR16x4 16.000 15.700 13.905 13.640 11.500 10.474 300 1.5 5°16' 1.173RTS TR18x4 18.000 17.700 15.905 15.640 13.500 12.474 300 1.5 4°36' 1.528RTS TR20x4 20.000 19.700 17.905 17.640 15.500 14.474 300 1.5 4°05' 1.940RTS TR22x5 22.000 21.665 19.394 19.114 16.500 15.294 300 1.5 4°43' 2.294RTS TR24x5 24.000 23.665 21.394 21.094 18.500 17.269 300 1.5 4°17' 2.781RTS TR26x5 26.000 25.665 23.394 23.094 20.500 19.269 300 1.5 3°55' 3.329RTS TR28x5 28.000 27.665 25.394 25.094 22.500 21.269 300 1.5 3°36' 3.905RTS TR30x6 30.000 29.625 26.882 26.547 23.000 21.563 300 1.5 4°05' 4.358RTS TR32x6 32.000 31.625 28.882 28.547 25.000 23.563 300 1.5 3°48' 5.038RTS TR36x6 36.000 35.625 32.882 32.547 29.000 27.563 300 1.5 3°20' 6.546RTS TR40x7 40.000 39.575 36.375 36.020 32.000 30.381 300 1.5 3°31' 7.983
Toleranz 7e
*Available in eft-hand thread
Size(Tr)
Tolerance 7e Max. lead variationµm/300mm
Straightnessmm/300mm
Lead angleWeight
(kg)d maxmm
d minmm
d2 maxmm
d2 minmm
d3 maxmm
d3 minmm
10x2 10 9,820 8,929 8,739 7,500 6,891 300 1,5 4°07‘ 0,482
12x3* 12 11,764 10,415 10,191 8,500 7,685 300 1,5 5°17‘ 0,653
14x3 14 13,764 12,415 12,191 10,500 9,685 300 1,5 4°26‘ 0,932
16x4* 16 15,700 13,905 13,640 11,500 10,474 100 1,5 5°16‘ 1,173
18x4 18 17,700 15,905 15,640 13,500 12,474 100 1,5 4°36‘ 1,528
20x4* 20 19,700 17,905 17,640 15,500 14,474 100 1,5 4°05‘ 1,940
22x5 22 21,665 19,394 19,114 16,500 15,294 100 1,5 4°43‘ 2,294
24x5* 24 23,665 21,394 21,094 18,500 17,269 100 1,5 4°17‘ 2,781
26x5 26 25,665 23,394 23,094 20,500 19,269 100 1,5 3°55‘ 3,329
28x5 28 27,665 25,394 25,094 22,500 21,269 100 1,5 3°36‘ 3,905
30x6* 30 29,625 26,882 26,547 23,000 21,563 100 1,5 4°05‘ 4,358
32x6* 32 31,625 28,882 28,547 25,000 23,563 100 1,5 3°48‘ 5,038
36x6* 36 35,625 32,882 32,547 29,000 27,563 100 1,5 3°20‘ 6,546
40x7* 40 39,575 36,375 36,020 32,000 30,381 150 1,5 3°31‘ 7,983
50x8* 50 49,550 45,868 45,468 41,000 39,168 150 2,0 3°11‘ 12,696
60x9* 60 59,470 55,360 54,935 50,000 47,979 150 2,0 2°58‘ 18,498
70x10* 70 69,470 64,850 64,425 59,000 56,819 150 2,0 2°49‘ 25,627
3.1 Trapezoidal threaded nut FBR
• For manual or powered control.
• For low and medium rotation speeds.
• For working under load.
• Material: CC493K CuSn7ZnPb (bronze)
• Norm: ISO 2901/2903 and DIN 103
• Tolerance: 7H
The use with steel or stainless steel screws gives good results, especially if lubrication is correctly ensured.
Size(Tr)
Thread direction
D1mm
D4mm
D5mm
D6mm
L1mm
L2mm
L3mm
Contactsurfacemm²
Weightkg
10x2 RG/LG 25 42 34 5 25 10 6 250 0,016
12x3 RG/LG 28 48 38 6 35 12 8 400 0,266
14x3 RG/LG 28 48 38 6 35 12 8 460 0,258
16x4 RG/LG 28 48 38 6 35 12 8 530 0,244
18x4 RG/LG 28 48 38 6 35 12 8 610 0,228
20x4 RG/LG 32 55 45 7 44 12 8 870 0,346
22x5 RG/LG 32 55 45 7 44 12 8 1030 0,322
24x5 RG/LG 32 55 45 7 44 12 8 1040 0,304
26x5 RG/LG 38 62 50 7 46 14 8 1280 0,474
28x5 RG/LG 38 62 50 7 46 14 8 1200 0,442
30x6 RG/LG 38 62 50 7 46 14 8 1370 0,408
32x6 RG/LG 45 70 58 7 54 16 10 1710 0,706
36x6 RG/LG 45 70 58 7 54 16 10 1950 0,606
40x7 RG/LG 63 95 78 9 66 16 12 2650 1,700
44x7 RG/LG 63 95 78 9 66 16 12 2940 1,524
50x8 RG/LG 72 110 90 11 75 18 14 4540 2,324
60x9 RG/LG 88 130 110 11 90 20 16 5490 3,942
70x10 RG/LG 95 130 110 11 105 22 17 7500 4,465
EG-Single start
Trapezoidal screw drives GTTGT
3 Trapezoidal threaded nuts
12
13
RG= right-hand thread
LG= left-hand thread
Size(Tr)
Thread direction
D1mm
D4mm
D5mm
D6mm
L1mm
L2mm
L3mm
Contactsurfacemm²
Weightkg
12x6P3 RG 28 48 38 6 35 12 8 400 0,266
14x6P3 RG 28 48 38 6 35 12 8 460 0,258
16x8P4 RG 28 48 38 6 35 12 8 530 0,244
18x8P4 RG 28 48 38 6 35 12 8 610 0,228
20x8P4 RG 32 55 45 7 44 12 8 870 0,346
22x10P5 RG 32 55 45 7 44 12 8 1030 0,322
24x10P5 RG 32 55 45 7 44 12 8 1040 0,304
26x10P5 RG 38 62 50 7 46 14 8 1280 0,474
28x10P5 RG 38 62 50 7 46 14 8 1200 0,442
30x12P6 RG 38 62 50 7 46 14 8 1370 0,408
32x12P6 RG 45 70 58 7 54 16 10 1710 0,706
36x12P6 RG 45 70 58 7 54 16 10 1950 0,606
40x14P7 RG 63 95 78 9 66 16 12 2650 1,700
50x16P8 RG 72 110 90 11 75 18 14 - -
ZG-Two start
14
• For manual or powered control
• For low and medium rotation speeds
• For working under load
• Material: CC493K (bronze)
• Norm: ISO 2901/2903 and DIN 103
• Tolerance: 7H
The use with steel or stainless steel screws gives good results, especially if lubrication is correctly ensured.
3.2 Trapezoidal threaded nut RLR
Trapezoidal screw drives GTTGT
D=Rechtsgewinde G= Linksgewinde
Size(Tr)
Thread direction
Dmm
Cmm
Contactsurfacemm²
Weightkg
10x2 RG/LG 22 20 200 0,053
12x3 RG/LG 26 24 280 0,083
14x3 RG/LG 30 28 380 0,135
16x4 RG/LG 36 32 490 0,232
18x4 RG/LG 40 36 630 0,320
20x4 RG/LG 45 40 790 0,455
22x5 RG/LG 45 44 940 0,480
24x5 RG/LG 50 48 1130 0,656
26x5 RG/LG 50 52 1340 0,670
28x5 RG/LG 60 56 1570 1,102
30x6 RG/LG 60 60 1780 1,140
32x6 RG/LG 60 64 1910 1,177
36x6 RG/LG 75 72 2610 2,189
40x7 RG/LG 80 80 3210 2,725
44x7 RG/LG 80 88 3920 2,815
50x8 RG/LG 90 100 5060 4,014
60x9 RG/LG 100 120 7320 5,150
70x10 RG/LG 110 140 10000 7,805
Size(Tr)
Thread direction
Dmm
Cmm
Contactsurfacemm²
Weightkg
12x6P3 RG 26 24 280 0,083
14x6P3 RG 30 28 380 0,135
16x8P4 RG 36 32 490 0,232
18x8P4 RG 40 36 630 0,320
20x8P4 RG 45 40 790 0,455
22x10P5 RG 45 44 940 0,480
24x10P5 RG 50 48 1130 0,656
26x10P5 RG 50 52 1340 0,670
28x10P5 RG 60 56 1570 1,102
30x12P6 RG 60 60 1780 1,140
32x12P6 RG 60 64 1910 1,177
36x12P6 RG 75 72 2610 2,189
40x14P7 RG 80 80 3210 2,725
50x16P8 RG 90 100 - -
EG-Single start ZG-Two start
RG= right-hand thread
LG= left-hand thread
15
Size(Tr)
Thread direction
Dmm
Cmm
Contactsurfacemm²
Weightkg
10x2 RG/LG 22 15 150 0,035
12x3 RG/LG 26 18 210 0,055
14x3 RG/LG 30 21 285 0,090
16x4 RG/LG 36 24 365 0,155
18x4 RG/LG 40 27 470 0,215
20x4 RG/LG 45 30 590 0,305
22x5 RG/LG 45 33 700 0,322
24x5 RG/LG 50 36 845 0,440
26x5 RG/LG 50 39 1005 0,450
28x5 RG/LG 60 42 1175 0,740
30x6 RG/LG 60 45 1335 0,765
32x6 RG/LG 60 48 1430 0,790
36x6 RG/LG 75 54 1950 1,470
40x7 RG/LG 80 60 2400 1,830
44x7 RG/LG 80 66 2940 1,890
50x8 RG/LG 90 75 3790 2,695
60x9 RG/LG 100 90 5490 3,865
70x10 RG/LG 110 100 7140 5,115
80x10 RG/LG 120 110 8900 6,000
Size(Tr)
Thread direction
Dmm
Cmm
Contactsurfacemm²
Weightkg
12x6P3 RG 26 18 210 0,055
14x6P3 RG 30 21 285 0,090
16x8P4 RG 36 24 365 0,155
18x8P4 RG 40 27 470 0,215
20x8P4 RG 45 30 590 0,305
24x10P5 RG 50 36 845 0,440
30x12P6 RG 60 45 1335 0,765
36x12P6 RG 75 54 1950 1,470
40x14P7 RG 80 60 2400 1,830
3.3 Trapezoidal threaded nut RKS
• For manual control
• For low rotation speeds
• For clamping or locking functions
• For receiving dead weights
• Material: 11SMnPb37 (steel)
• Norm: ISO 2901/2903 and DIN 103
The use of steel/steel contact surface is not recommended for motorised motions.
EG-Single start ZG-Two start
RG= right-hand thread
LG= left-hand thread
Size(Tr)
Thread direction
Dmm
Cmm
Contactsurfacemm²
Weightkg
12x6P3 RG 26 24 279 0,073
14x6P3 RG 30 28 379 0,120
16x8P4 RG 36 32 485 0,206
18x8P4 RG 40 36 625 0,286
20x8P4 RG 45 40 785 0,406
22x10P5 RG 45 44 931 0,428
24x10P5 RG 50 48 1124 0,585
28x10P5 RG 60 56 1563 0,984
30x12P6 RG 60 60 1776 1,017
32x12P6 RG 60 64 1902 1,051
36x12P6 RG 75 72 2592 1,955
40x14P7 RG 80 80 3192 2,434
Size(Tr)
Thread direction
Dmm
Cmm
Contactsurface mm²
Weightkg
10x2 RG/LG 22 20 200 0,047
10x3 RG/LG 22 20 - -
12x3 RG/LG 26 24 279 0,073
14x3 RG/LG 30 28 379 0,120
14x4 RG/LG 30 28 - -
16x4 RG/LG 36 32 485 0,206
18x4 RG/LG 40 36 625 0,286
20x4 RG/LG 45 40 785 0,406
22x5 RG/LG 45 44 931 0,428
24x5 RG/LG 50 48 1124 0,585
26x5 RG/LG 50 52 1337 0,599
28x5 RG/LG 60 56 1563 0,984
30x6 RG/LG 60 60 1776 1,017
32x6 RG/LG 60 64 1902 1,051
36x6 RG/LG 75 72 2594 1,955
40x7 RG/LG 80 80 3192 2,434
44x7 RG/LG 80 88 3910 2,514
50x8 RG/LG 90 100 - -
60x9 RG/LG 100 120 - -
70x10 RG/LG 110 140 - -
80x10 RG/LG 120 160 - -
3.4 Trapezoidal threaded nut RLS
• For manual control
• For low rotation speeds
• For clamping or locking functions
• For receiving dead weights
• Material: 11SMnPb37 (steel)
• Norm: ISO 2901/2903 and DIN 103
The use of steel/steel contact surface is not recommended for motorised motions.
16
Trapezoidal screw drives GTTGT
EG-Single start ZG-Two start
RG= right-hand thread
LG= left-hand thread
17
Size(Tr)
Thread direction
SWmm
Cmm
Contactsurfacemm²
Weightkg
10x2 RG/LG 17 15 150 0,022
12x3 RG/LG 19 18 210 0,032
14x3 RG/LG 22 21 285 0,049
16x4 RG/LG 24 24 365 0,065
18x4 RG/LG 27 27 470 0,091
20x4 RG/LG 30 30 590 0,124
22x5 RG/LG 30 33 700 0,125
24x5 RG/LG 36 36 845 0,219
26x5 RG/LG 36 39 1005 0,216
28x5 RG/LG 41 42 1175 0,318
30x6 RG/LG 46 45 1335 0,445
32x6 RG/LG 50 48 1430 0,567
36x6 RG/LG 55 54 1950 0,708
40x7 RG/LG 60 60 2400 0,893
44x7 RG/LG 65 66 2940 1,538
50x8 RG/LG 75 75 3790 1,889
60x9 RG/LG 90 90 5490 3,277
70x10 RG/LG 100 100 - -
Size(Tr)
Thread direction
SWmm
Cmm
Contactsurfacemm²
Weightkg
12x6P3 RG 19 18 210 0,032
14x6P3 RG 22 21 285 0,049
16x8P4 RG 24 24 365 0,065
18x8P4 RG 27 27 470 0,091
20x8P4 RG 30 30 590 0,124
22x10P5 RG 30 33 700 0,125
24x10P5 RG 36 36 845 0,219
30x12P6 RG 46 45 1335 0,445
36x12P6 RG 55 54 1950 0,708
40x14P7 RG 60 60 2400 0,893
3.5 Trapezoidal threaded nut SKS
• For manual control
• For low rotation speeds
• For clamping or locking functions
• For receiving dead weights
• Material: 11SMnPb37 (steel)
• Norm: ISO 2901/2903 and DIN 103
The use of steel/steel contact surface is not recommended for motorised motions.
EG-Single start ZG-Two start
RG= right-hand thread
LG= left-hand thread
GETOtec
Schwindstraße 9D-80798 München
Telefon: +49 (0)89 954 164 10Telefax: +49 (0)89 954 164 11
info@getotec.dewww.getotec.de
GTTGT-0413-V1_en
top related