ts2000 - parsseal.com
Post on 03-May-2022
1 Views
Preview:
TRANSCRIPT
RELY ON EXCELLENCE
TS2000Seal supply systems | Thermosiphon systems
eagleburgmann.cominfo@eagleburgmann.com
12.06.2020 © EagleBurgmann
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications, however, means that they can serve only as guide values.We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. This is subject to change.
1
FeaturesWith the EagleBurgmann TS2000 thermosiphon system it is possible to supply buffer/barrier fluid to double and tandem mechanical seals for a broad range of applications. The range is available in 2 different pressure levels with dished heads, sight-glass for level monitoring and with or without cooling coil. TS vessels are equipped as standard with all the necessary system connections and brackets. The modular system allows the TS2000 vessels to be combined with a wide range of system components such as, level switch, circulation pump, hand refill pump, thermometer, base frame, etc.
Circulation based on API 682 / ISO 21 049: Plan 52, Plan 53A
Advantages Standards and approvals
Recommended applications
Functional descriptionThe TS system performs all the basic functions of a buffer/barrier system for the operation of double seals:
Use compressed air or nitrogen for pressurization.
Circulation in accordance with API 682 / ISO 21 049: Plan 52, Plan 53A
Modular system: combination with a wide range of system components possible
•Vessel made of 1.4571 stainless steel / borosilicate sight-glasses: suitable for universal applications
•
Available with or without cooling coil•Sockets with recessed gasket: no contamination of the circuit by thread sealant
•
PED 2014/68/EU (Design and production in accordance with EU Pressure Equipment Directive)
•
ASME VIII, Div. 1 (Design, calculation and production)
•SELO, TR CU on request•
Chemical industry•Petrochemical industry•Oil and gas industry•Refining technology•
to pressurize the buffer chamber•leakage compensation•buffer/barrier fluid is circulated by thermosiphon effect or external circulation system
•
to cool the seal•to selectively absorb product leakage and prevent dry running (tandem arrangement)
•
RELY ON EXCELLENCE
eagleburgmann.cominfo@eagleburgmann.com
12.06.2020 © EagleBurgmann
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications, however, means that they can serve only as guide values.We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. This is subject to change.
2
Item Description1 Buffer/barrier fluid IN (G1/2")2 Buffer/Barrier fluid OUT (G1/2")3 Cooling water IN (G1/2")4 Cooling water OUT (G1/2")5 Filling connection with plug (G1/2")6 Pressure gas connection (G1/2")7 Connection for level switch or level indicator
(G2")8 Connection for refill unit (G1/8")9 Universal connection (G1/2" for safety valve,
flare, etc.)10 Bracket for refill unit11 Sight-glass
RELY ON EXCELLENCE
eagleburgmann.cominfo@eagleburgmann.com
12.06.2020 © EagleBurgmann
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications, however, means that they can serve only as guide values.We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. This is subject to change.
3
Operating and installation diagram for a TS2000 system.
The TS vessel must always be installed higher than the mechanical seal. The buffer/barrier fluid flows via the return pipe into the vessel and is cooled. The exchange of fluid takes place by the thermosiphon principle or by forced circulation, e.g. with a pumping screw. Connection pipes to the seal should be designed with as little resistance as possible.
1 SPI Measuring unit2 SPS Level switch3 From PCV, we recommend using a reverse controlled pressure control valve (PCV)4 SPN5 SPU6 Mechanical seal
Installation, details, options
RELY ON EXCELLENCE
eagleburgmann.cominfo@eagleburgmann.com
12.06.2020 © EagleBurgmann
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications, however, means that they can serve only as guide values.We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. This is subject to change.
4
TS4030 A gap-free TS vessel, with a pickled and passivated surface
TS5000 TS vessel can be dismantled
Product variants
Designation TS2000-00 TS2001-00 TS2063/A002 TS2063/A001 TS2000/C104 TS2000/C105 TS2000/C107 TS2000/C200Design code PED 2014/68/
EUPED 2014/68/EU
PED 2014/68/EU PED 2014/68/EU ASME VIII, Div.1without U-stamp
ASME VIII, Div.1without U-stamp
ASME VIII, Div.1with U-stamp
PED / EN13445
Integrated cooling coil ■ ■ ■ ■ ■ ■Volume, vessel (liters) 9 9 9 9 12 12 12 9Volume, tube (liters) 0.5 0.5 0.5 0.5 0.5 5.5
Allowable pressure1) 30 bar(435 PSI)
30 bar(435 PSI)
63 bar(914 PSI)
63 bar(914 PSI)
20 bar(290 PSI)
45 bar(653 PSI)
45 bar(653 PSI)
30 bar(435 PSI)
Allowable temperature1) -60 ... +200 °C(-76 ... +392 °F)
-60 ... +200 °C(-76 ... +392 °F)
-60 ... +200 °C(-76 ... +392 °F)
-60 ... +200 °C(-76 ... +392 °F)
-29 ... +150 °C(-20 ... +302 °F)
-29 ... +200 °C(-20 ... +392 °F)
-29 ... +200 °C(-20 ... +392 °F)
-60 ... +200 °C(-76 ... +392 °F)
Working volume, MAX-MIN (liters)
1.8 1.8 1.8 1.8 2.1 1.9 1.9 1.8
Cooling capacity – without cooling water (kW)2)
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Cooling capacity – natural circulation (kW)2)
1.5 1.5 1.5 1.5 1.5 1.5
Cooling capacity – forced circulation (kW)2)
4.0 4.0 4.0 4.0 4.0 4.0
Metal parts 1.4571 1.4571 1.4571 1.4571 acc. ASME Section II Material
acc. ASME Section II Material
acc. ASME Section II Material
1.4571
Sight-glass ReflexBorosilicate
ReflexBorosilicate
ReflexBorosilicate
ReflexBorosilicate
ReflexBorosilicate
ReflexBorosilicate
ReflexBorosilicate
ReflexBorosilicate
Seal PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFENet weight (approx.) 15.5 kg
(34 lb)12.5 kg (28 lb)
28.5 kg(63 lb)
26 kg(57 lb)
19.2 kg(42 lb)
30 kg (66 lb)
28.5 kg(63 lb)
15.5 kg(34 lb)
Other versions on request.
1) Design data, permissible working values depend on the actual conditions of service.2) The cooling performance depends on the available fluids, their temperatures and flow rates. Please contact EagleBurgmann for professionally selecting the correct heat exchanger.
top related