utg-8 ultrasonic thickness gauge
Post on 21-Feb-2017
40 Views
Preview:
TRANSCRIPT
Simple, Smart, Effective!Simple, Smart, Effective!
UTG-8UTG-8
Easy as 1-2-3Easy as 1-2-3
Connect the probe Calibrate on a built-in block Switch modes andview readings
11 22 33
Keys legendKeys legend
Switch instrument ON and OFF
Probe zeroing
Run calibration
Switch between Metric and English units
Switch Measure / Scanning modes.Increase current value
Switch backlight mode.Decrease current value.
UTG-8 characteristicsUTG-8 characteristics• Measurement range (steel): 0,63 – 500 mmMeasurement range (steel): 0,63 – 500 mm
• Sound velocities range: 1250 - 10000 m/sSound velocities range: 1250 - 10000 m/s
• Discreetness: 0,01 mm; .001 in; Discreetness: 0,01 mm; .001 in;
1 m/s; .0001 in/us1 m/s; .0001 in/us
• Accuracy: .001 in; 0,03 mmAccuracy: .001 in; 0,03 mm
• Dimensions: Dimensions: 35×70×12535×70×125 mm mm
• Weight: 176 gWeight: 176 g
Probe zeroingProbe zeroing
1 point calibration1 point calibration
Setting of the known velocitySetting of the known velocity
2 points calibration2 points calibration
“MEASUREMENT” mode is used for discrete points measurements. Reading stays onscreen after removing of the probe from the object.
ModeMode « «MEASUREMENTMEASUREMENT»»
Mode Mode ««SCANNINGSCANNING»»
“SCANNING” mode is used for corrosion or other thin areas search. The minimum thickness over all scanning process is displayed after removing the probe from the object.
top related