w2laboratories, 2008 a fiber-waveguide-fiber alignment & test station w2laboratories, 2008
Post on 18-Jan-2018
213 Views
Preview:
DESCRIPTION
TRANSCRIPT
W2Laboratories, 2008
A Fiber-Waveguide-Fiber Alignment & Test Station
W2Laboratories, 2008
W2Laboratories, 2008
Basic Setup
Alignment Speed
First Waveguide 2-3 minutes
Subsequent 30 seconds
W2Laboratories, 2008
SoftwareQuit theprogram
Control communication with tester.Local mode will enable test buttons on Advanced View
Abort anyrunning task.
CurrentWaveguide
Open AdvancedView
CommunicationLog with tester Task Log
Current Task
Current motor position.Click to enter position to move
Jog Arrows
Jog step size Motor Limit
NanoTrak display Signal Signal range and relative intensity
W2Laboratories, 2008
Fast Search Algorithm
Distance Across PLC (µm)
Ref
lect
ion
Sig
nal
Si Substrate
Waveguide
Air
Top layer with antireflection coating
Bottom layer with antireflection coating
• Scan the beam across the PLC for reflection signal.• Identify the interface between Si substrate and waveguide layer by the sudden drop
of the reflection (> 20 dB). • Move the beam to the waveguide layer using the design distance between the
waveguide the the interface layer.• Scan the beam along the waveguide layer until the reflection peak is found.
top related