wood floor products - sungold abrasives
Post on 12-Sep-2021
2 Views
Preview:
TRANSCRIPT
P R E M I U M Q U A L I T Y
Wood Floor Products
2 SUNGOLD® ABRASIVES 1.800.726.3004 ! www.sungoldabrasives.com
Wood Floor Sanding Products
SUNGOLD® Silicon Carbide Edger Discs
Grits: 30 – 120 Heavy Weight Paper – Type FFRPackaging: 50 Discs per box
10 boxes per case
Grits: 12 – 24 Combination Backing – Type KSRPackaging: 25 Discs per box
8 boxes per case
7” Diameter: 5/16" (Small) center hole with 8 slits
Grit Part #
120 88708
100 88707
80 88706
60 88705
50 88704
40 88703
36 88702
30 88750
24 88701
20 88747
16 88746
12 88745
7” Diameter: 7/8" (Large) center hole with 4 slits
Grit Part #
120 88808
100 88807
80 88806
60 88805
50 88804
40 88803
36 88802
30 88850
24 88801
20 88847
16 88846
12 88845
#88746Type KSR
#88847Type KSR
#88806Type FFR
Also available in 5" diameter.
1.800.726.3004 ! www.sungoldabrasives.com SUNGOLD® ABRASIVES 3
Wood Floor Sanding Products
SUNGOLD® Cloth 7" Edger Discs (small center hole)
SUNGOLD® Random Orbital Discswith Dust Evac Hole – Excellent for wood steps!
Packaging: 50 Discs per box10 boxes per case
Sungold® Premium Zirconia Cloth
Heavy Weight Aluminum Oxide PaperLoop backing attaches to Velcro pads.
Premium Plus C Weight Aluminum Oxide PaperLoop backing attaches to Velcro pads.
Available Diameters: 5", 6", 7" and 8" — in all Vacuum Hole Patterns.
• 5/16" (small) center hole with 8 slits.
• Heavy Duty Full Polyester Cloth Backing willstand up to the most severe applications.
• P-Graded grain for a more consistent finish.
Grit Part #
120 83408
100 83407
80 83406
60 83405
50 83404
40 83403
36 83402
24 83401
6"x9" Hole 5"x8" HoleFits Festool Fits Bosch
Grit Part # Part #
120 49508 43908
100 49507 43907
80 49506 43906
60 49505 43905
#362 SeriesHeavy Weight
#844 Series
#439 SeriesPremuim Plus
#834 Series
Black Silicon Carbide ClothGrit Part #
120 84408
100 84407
80 84406
60 84405
40 84403
36 84402
24 84401
6"x9" Hole 5"x8" HoleFits Festool Fits Bosch
Grit Part # Part #
120 40908 362083
100 40907 362076
80 40906 362069
60 40905 362052
40 40903 29503
4 SUNGOLD® ABRASIVES 1.800.726.3004 ! www.sungoldabrasives.com
Wood Floor Sanding Products
SUNGOLD® Loop Back Edger Discs –Fits Sungold® conversion adapter pad shown on page 5
Packaging: 25 Discs per box10 boxes per case
Black Silicon Carbide Cloth Sungold® Premium Zirconia ClothGrit Part #
120 83808
100 83807
80 83806
60 83805
40 83803
36 83802
24 83801
• 7" Diameter.
• Heavy Duty Full Polyester Cloth Backing willstand up to the most severe applications.
• P-Graded grain for a more consistent finish.
Grit Part #
120 83908
100 83907
80 83906
60 83905
40 83903
36 83902
24 83901
#838 Series
#839 Series
5/16" (Small) center hole with 8 slits PLUS Hook & Loop Backing for choiceof regular mounting or mounting to Sungold Velcro® Adapter Plate # 98911
Multi-Mount™ Discs — 7" DiameterSilicon Carbide Paper Edger Discs
Grit Part #
120 83608
100 83607
80 83606
60 83605
40 83603
36 83602
24 83601
SUNGOLD® Loop Back Edger Discs –Fits Sungold® conversion adapter pad shown on page 5
Packaging: 25 Discs per box10 boxes per case
1.800.726.3004 ! www.sungoldabrasives.com SUNGOLD® ABRASIVES 5
Wood Floor Sanding Products
SUNGOLD® 7" Edger Machine Velcro® Adapter plateFits Clarke & Galaxy Sanders
SUNGOLD® Zirconia 4-3/4" Heavy Duty Hook & Loop DiscsFits WerkMaster™ Raptor Machine
SUNGOLD® Edger Maroon Pads
Packaging: 48 Discs per box10 boxes per case
• 4-3/4" Diameter.
• Heavy Weight 100% Polyester Cloth.
• Premium Zirconia Grain provides a fast cut and long life.
• P-Graded grain for a more consistent finish.
Part # 98911
Part # 88786
New from SUNGOLD®
Available in other sizes to fit other machines.WerkMaster™ is a trademark of WerkMaster Grinders & Sanders Inc.
Velcro® is a registered trademark of Velcro USA.
Grit Part #
120 81208
100 81207
80 81206
60 81205
50 81204
40 81203
36 81202
24 81201
#812 Series
Part # Size Packing Info88786 7" x 5/16" with slits 20 per box
small center hole
88886 7" x 7/8" with slits 20 per boxlarge center hole
Order by number of boxes.
6 SUNGOLD® ABRASIVES 1.800.726.3004 ! www.sungoldabrasives.com
Wood Floor Sanding Products
SUNGOLD® Tweeners™ — Between Coat Abrasion System
Packaging: 50 pieces per box10 boxes per case
Order by the number of boxes.
Bonus: Maroon Tweener hand padincluded in each box.
Application Information:
• For Wood Floor Sanding
• Between Coats Abrasion System
For Attachment to Maroon Pad OR for Hand Sanding stairs, corners,around vents
• Quick Cutting
• Resists Loading
• Long Lasting
• Consistent Finish
• Durable C weight paper
• Premium Aluminum Oxide Grains
• Proprietary resin on resin formula.
New from SUNGOLD®
Size: 4-1/4" x 2-7/8" Rectangle
Grit Part #
240 31914
180 31910
Photo shows Tweeners™ attached to maroon pads. Maroon pads are sold separately. See page 7.
Fabric on back of Tweener™ forsuperior hold to maroon pad
Free Tweener™ size maroon pad in each box
50 pieces per box
Part # Size Packing Info89486 16" x 7" x 5/16" 6 per box
with slits
Order by number of boxes.
1.800.726.3004 ! www.sungoldabrasives.com SUNGOLD® ABRASIVES 7
Wood Floor Sanding Products
SUNGOLD® Between Coat Maroon Pads
Kassteel® Blue — Continuous Rolls
Packaging: Packed 1 roll per shrink wrap.Packed 10 rolls per case
Application Information:
• For Wood Floor Sanding
• Between Coats Abrasion System
• For Hand Sanding
• Quick Cutting
• Resists Loading
• Long Lasting
• Consistent Finish
• Durable C weight paper
• Premium Aluminum Oxide Grains
• Proprietary resin on resin formula.
Grit Part #
320 60212
240 60214
180 60210
Order by number of rolls.
Size: 2-3/4" x 25 yards
16" pad with removable 7" center disc
8 SUNGOLD® ABRASIVES 1.800.726.3004 ! www.sungoldabrasives.com
Wood Floor Sanding Products
SUNGOLD® Buff & Polish Pads – 16" Diameter
• 1" thick — heavy duty pad.
• 3-3/8" removable center hole.
• Can be used as a driver pad.
Packaging: 5 pads per boxOrder by number of boxes
SUNGOLD® Sand Screen Discs
• Silicon Carbide Grain.
• Heavy duty mesh backing.
• Resists loading.
Packaging: 12 discs per carton
Part #89487
15" Diam. 16" Diam. 17" Diam. 18" Diam.Grit Part # Part # Part # Part #
220 89311 89411 89511 89611
180 89310 89410 89510 89610
150 89309 89409 89509 89609
120 89308 89408 89508 89608
100 89307 89407 89507 89607
80 89306 89406 89506 89606
60 89305 89405 89505 89605
1.800.726.3004 ! www.sungoldabrasives.com SUNGOLD® ABRASIVES 9
Wood Floor Sanding Products
SUNGOLD® Large Diameter Silicon Carbide Discs
• Grain: Silicon Carbide.
• Full resin on resin heat resistant phenolic.
Readily available in all other sizes: 14", 15", 18", 19", 20", etc.
Heavy Weight Paper
16" x 2" 17" x 2"Grit Part # Part #
120 87008 87108
100 87007 87107
80 87006 87106
60 87005 87105
50 87004 87104
40 87003 87103
36 87002 87102
30 87050 87150
Combination Backing
16" x 2" 17" x 2"Grit Part # Part #
24 87001 87101
20 87047 87147
16 87046 87146
12 87045 87145
10 SUNGOLD® ABRASIVES 1.800.726.3004 ! www.sungoldabrasives.com
Wood Floor Sanding Products
Heavy Weight PaperCombination Backing
SUNGOLD® Floor Sanding Rolls
SUNGOLD® Floor Sanding Rolls
25 yards longPacked 1 roll per carton
50 yards longPacked 1 roll per carton
8" wide 12" wideGrit Part # Part #
120 87008 87108
100 87007 87107
80 87006 87106
60 87005 87105
50 87004 87104
40 87003 87103
36 87002 87102
30 87050 87150
Green Zirconia Cloth Rolls25 yards longPacked 1 roll per carton
8" wide 12" wideGrit Part # Part #
24 87001 87101
20 87047 87147
16 87046 87146
12 87045 87145
8" wide 12" wideGrit Part # Part #
100 86607 87207
80 86606 87206
60 86605 87205
50 86604 87204
40 86603 87203
36 86602 87202
24 86601 87201
• P Graded Zirconia provides amore consistent finish.
• Full resin on resin heat resistant phenolic bond holdsup to the high heat of sanding.
• Heavy strength 100% polyesterbacking.
Rolls also available in Silicon Carbide Cloth and Zirconia Paper
1.800.726.3004 ! www.sungoldabrasives.com SUNGOLD® ABRASIVES 11
Wood Floor Sanding Products
SUNGOLD® Floor Sanding Belts
7-7/8" x 29-1/2" Belts
Silicon GreenCarbide Zirconia
Grit Part # Part #
120 88208 82608
100 88207 82607
80 88206 82606
60 88205 82605
50 88204 82604
40 88203 82603
36 88202 82602
24 88201 82601
16 88246* N/A
11-7/8" x 29-1/2" BeltsPacked 10 belts per carton Packed 10 belts per carton
• Extra heavy Y weight CLOTH backings.
• Designed to withstand extreme highhorsepower applications.
• Reversible high strength bump-free joint.
Some of the other sizes available:7-7/8” x 21-1/16” 7-7/8” x 39-3/8”
8” x 19” 9-7/8” x 29-1/2”
Readily available in other sizes!
Black BeltsSilicon Carbide
Green BeltsZirconia
Silicon GreenCarbide Zirconia
Grit Part # Part #
120 87708 82108
100 87707 82107
80 87706 82106
60 87705 82105
50 87704 82104
40 87703 82103
36 87702 82102
24 87701 82101
16 87746* N/A
*16 grit is a combination backing, not a Y weight cloth
Wood Floor ProductsSungold® has been manufacturing abrasives since 1976. Our original emphasis was
on the wood cabinetry and professional woodworking industries. Today we manufactureproducts for glass, stone, metal, wood, automotive, aerospace and composites. And now our latest market: Wood Floor Applications
P R E M I U M Q U A L I T Y
P R E M I U M Q U A L I T Y
4 Harbor Park DrivePort Washington, NY 11050
Phone: 1-516-484-5145 • Toll Free: 1-800-726-3004 • Fax: 1-516-484-5108Visit our website: www.sungoldabrasives.com
Contact us by email: orders@sungoldabrasives.com
© 2001-2011 Sungold Abrasives USA, Inc.
LIT-420
Important Notice to PurchaserTerms and Conditions of Sale; Product Selection Your placement with Sungold Abrasives of an order for products constitutes your acceptance of Sungold’soffer of sale and your agreement to these terms and conditions of sale. These terms and conditions shall be governed by the laws of New York (without referenceto choice of law principles) and may not be changed except by Sungold’s express written agreement. Notwithstanding any oral or written information, opinions,catalog descriptions or advice furnished by Sungold or its employees at any time, you, the Buyer, have sole responsibility to evaluate and test Sungold’s productsso you can select those that are suitable for use in your specific applications.
Limited Warranty and Remedy If products shipped do not conform to your specifications, or if, after use by you, the original Buyer, the products prove to bedefective, Sungold will, as the exclusive remedy, at Sungold’s option, either replace the non-conforming or defective products or issue a credit at their netinvoice price. This limited warranty shall not apply if (a) we do not receive written notice of the non-conformity or defect from you within 15 days after youreceive the products, (b) you do not return the non-conforming or defective products to us in their original packaging within 20 days after you receive theproducts or (c) the products are custom-made for you or are other special products. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIEDAND STATUTORY, INCLUDING (WITHOUT LIMITATION) THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ANDANY WARRANTIES ARISING OUT OF COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
Limitation of Liability; Release Except to the extent of the Limited Warranty and Remedy above, Sungold is not and shall not be liable to you for any claims,liabilities or damages of any kind whatsoever (including without limitation direct, indirect, compensatory, special, consequential, incidental or punitive damages)arising out of Sungold’s provision of products to you. By purchasing products from Sungold, you expressly release Sungold from all such claims, liabilities anddamages.
Errors; Photo & Color Disclaimer Sungold reserves the right to correct any clerical or typographical errors in this Catalog at any time. Product photographsand color shown herein are rendered as accurately as printing processes permit. While we have made every attempt to accurately portray each product,Sungold disclaims any liability for variations in photographic accuracy or color as compared to the actual product.
Contact Us Today!
top related