an energy solution ompany - naviya tech

“An Energy Solution Company”

Naviya Technologies, incorporated in the year 2011 with an objective

to create a market leading clean power solutions and subsequently

contribute towards building a sustainable clean & green world.

We constantly endeavour to bridge the gap between Power Generation

and its utilisation, specially in rural areas, through its

deep market reach under the strong leadership of its founders.

We are providing complete Solar, Energy Storage & HVAC solutions in

various verticals through our two decades of Technical Expertise & Ser-

vice to top brands and companies.

We design, supply, install and commission the system as one-point solu-

tion provider on turnkey basis.

Sealed Maintenance Free

(SMF) Batteries

Product Features • Consistent Float Voltage within ± 0.30V.

• Long shelf life of above 6 months.

• Deep Discharge recovery even after 7 days.

• Fast charging capability.

• Safe & Maintenance Free

• Superior Performance at 5—60 minutes rate of

discharge

Sealed Maintenance Free (SMF) Batteries

Construction Features

Discharge & Charging Characteristic

Perf

orm

ance

Ch

arac

teri

stics

Sealed Maintenance Free (SMF) Batteries

PRODUCT SPECIFICATIONS

Model Nominal Voltage Rated Capacity @C20 at

27°C (10.50 EBV)

Dimensions (mm)

Weight (kgs ± 5%) Length

(± 5mm)

Width

(± 5mm)

Height

(± 5mm)

127 12 7 151 65 94.5 1.95

1226 12 26 165 175 175 8.00

1242 12 42 198 167 175 13.5

1265 12 65 350 167 190 22

1280 12 80 307 169 240 23

12100 12 100 330 173 222 29.5

12120 12 120 405 171 240 35

12150 12 150 485 170 240 44

12200 12 200 522 240 220 60

12220 12 220 522 234 223 62

Electrolyte Immobilised H2SO4

Positive Plate Alloy *Arsenic and Cadmium Free Pb-Ca-Sn Alloy

Positive Plate Type Flat Pasted

Type of Connection Bolted

Type of Separator Material Absorptive Glass Mat

Container Material “ABS”

Recommended Charging Method Constant Potential

Shelf Life @ 27°C 6 Months

Self Discharge <1% per week

Float Charge Voltage 13.5V—13.62V

Boost Charge Voltage 13.8V—14.1V

6—8 Hrs Charging Time from 20% SOC to 90%

SOC

Operating Temperature Range 0°C—50°C

Design Life at 27 °C 10 Years

Cyclic Service Life (@ 27 °C)

At 20% D.O.D 1400 Cycles

At 50% D.O.D 650 Cycles

At 80% D.OD 300 Cycles

Product Performance Conforms to JIS C8702

T-Gel Batteries

Features • Tubular Positive plates for Long Life

• Synthetic separator for long life at High Temperature

• Improvised Gel Formula for better performance al

Extreme

Operating Conditions.

• MNRE Approved

• Performance Confirms to IEC 61427. IS 15549

• Shelf Life of about 12 Months at 27 °C.

T-Gel Batteries

Discharge Curves at different rates of discharge (27°C)

Construction Details Parameters 12V 2V

Positive Plates Tubular

Negative Plates Flat Pasted

Separator PE & AGM Sintered PVC

Container & Cover PPFR & ABS PPFR

Terminals Bolted type with metal inserts Bolted type with brass inserts

Electrolyte Immobilized Gel Sulphuric Acid in Gel Form

Safety Valve NA Pressure Regulated explosion

proof with Flame Arrestor

Performance Specifications Parameters 12V 2V

Design Life 10 years 20 Years @ 27 °C

Cycle Life @ 27 °C

@ 20% DOD 4000 Cycles


@80% DOD 1500 Cycles



@80% DOD 2200 Cycles

Self Discharge @ 27 °C < 4% per Month

Shelf Life 6 Months @ 27 °C Up to 6 Months @ 27 °C

Operating Conditions -20 ± 55 °C

Float Voltage 2.30—2.35 V/Cell 2.27 ± 0.02V

Boost Voltage 2.35—2.40 V/Cell 2.35 ± 0.02V

T-Gel Batteries

Product Specifications (12V)

Model Nominal

Voltage

Rated Capacity @ C10 @

27 °C up to 10.5 EBV

Dimensions (mm) Weight

(kg ± 5%) Length

(± 5mm)

Width

(± 5mm)

Height (±

5mm)

TG1240 12V 40 307 169 240 20

TG1260 12V 60 406 171 240 23

TG1280 12V 80 406 171 240 28

TG12100 12V 100 485 170 240 38

TG12120 12V 120 520 238 220 47

TG12150 12V 150 506 197 395 68

TG12200 12V 200 506 197 395 75

Product Specifications (2V)

Model Nominal

Voltage

Rated Capacity @ C10 @

27 °C up to 10.5 EBV


(kg ± 5%) Length

(± 5mm)

Width

(± 5mm)

Height (±

5mm)

TG2200 2V 200 105 173 405 13

TG2300 2V 300 116 167 405 18

TG2400 2V 400 149 170 405 24

TG2500 2V 500 180 167 385 30

TG2600 2V 600 211 169 405 34

TG2750 2V 750 262 170 405 43

TG2800 2V 800 356 173 388 46

TG2900 2V 900 356 173 388 54

TG21000 2V 1000 356 173 388 60

*Specifications Are Under Continuous Improvement. Subject to Change Without Notice.

*Further Rating details will be provided on request.

Low Maintenance Lead Acid

(LMLA) Batteries

Features • Special Lead Alloy encompass Virgin Active Material

• Ultra Low Maintenance.

• MNRE Approved

Product Specifications (Short Tubular)

Model

Capacity AH @ 27 °C Dimensions (mm) Weight

(kg ± 5%) C20 C10 Length

(± 5mm)

Width (±

5mm)

Height1

(± 5mm)

Height2

(± 5mm)

ST25 25 20 305 172 200 17 240

ST50 50 40 305 172 200 20.5 240

ST75 75 60 410 172 210 27.5 250

ST100 100 80 512 212 215 38 266

ST130 130 100 515 275 215 45 266

ST150 150 120 515 275 255 54 290

Product Specifications (Tall Tubular)

Model

Capacity AH @ 27 °C Dimensions (mm) Weight

(kg ± 5%) C20 C10 Length

(± 5mm)

Width (±

5mm)

Height1

(± 5mm)

Height2

(± 5mm)

TT100 100 80 502 188 370 410 48.0

TT120 120 100 502 188 420 460 55.5

TT150 150 120 502 188 420 460 57.5

TT180 180 150 502 188 420 460 62.5

TT200 200 165 502 188 420 460 66.0

Product Specifications (Inverter Batteries)

Model Capacity @

C10

Dimensions (mm) Acid Vol.

(Ltrs.) Net Wt. (kg)

Dry Wt.

(kg) Length

(± 5mm)

Width (±

5mm)

Height1

(± 5mm)

INV100 100 512 213 236 25 12 40.0

INV130 120 518 273 255 30 16.8 50.0

INV150 150 518 273 255 37.2 16.6 57.0

INV180 180 518 273 255 44.0 15.8 63.0

Low Maintenance Lead Acid (LMLA)

Batteries

Product Specifications (Stationary)

Model

Capacity

@ 10 Hr.

Rate as

per

IS1651


First

Charge

Current

Recharge Current

Length

(±

15mm)

Width

(±

15mm)

Height

(±

15mm)

With

Acid

With-

out Ac-

id

Up to

2.4 VPC

Till Full

Charge

L220 20Ah 95 165 275 6 4.0 1 2 1

L240 40Ah 95 165 275 6.9 5.0 2 4 2

L260 60Ah 95 165 275 7.6 6.0 3 6 3

L280 80Ah 145 170 280 11.1 7.8 4 8 4

L2100 100Ah 145 170 440 15.6 10.5 5 10 5

L2120 120Ah 145 170 440 15.9 11.1 6 12 6

L2150 150Ah 215 170 440 17.5 13.3 7.5 15 7.5

L2200 200Ah 215 185 485 27 20 10 20 10

L2300 300Ah 265 185 485 37 28 15 30 15

L2400 400Ah 265 210 485 49 38 20 40 20

L2500 500Ah 265 210 515 57 41 25 50 25

L2600 600Ah 305 210 535 64 45 30 60 30

L2700 700Ah 305 220 700 74 52 35 70 35

L2800 800Ah 305 220 700 84 60 40 80 40

L2900 900Ah 305 220 700 94 67 40 90 45

L21000 1000Ah 305 220 700 105 75 50 100 50

Low Maintenance Lead Acid (LMLA)

Batteries

Lithium—Ion Battery

INTRODUCING HI—DENSE, HI—TEMPERATURE SUSTAINABLE

LITHIUM FERRO PHOSPHATE (LiFePO4) The lithium iron phosphate (LiFePO4) battery, also called LFP battery is a type of lithium-ion

battery, which uses LiFePO4 as a cathode material, and a graphitic carbon electrode with a

metallic current collector grid as the anode. LiFePO4 batteries lower energy density and offer

longer lifetimes, better power density (the rate that energy can be drawn from them) and are

inherently safer

• 100% charging can be done

in 2 Hours

• High Energy Density

• 100% Charging & Discharging

• Multiple Thousands of Cycles @

100% DOD

• Low Weight & Volume

• Portable


12V Series

Features • Built-in automatic protection for over-charge, over discharge, and over

temperature • Maintenance free • Internal cell balancing • Communication of monitored data via Battery Management System (BMS) • Thousands of cycles, 100%DOD, under normal conditions • Can be charged using most standard lead-acid charges (set for AGM/GEL

cells) • Flame retardant plastics

Model Nominal

Cap. (Ah)

Nominal

Voltage (V)

Nominal

Energy

(Wh)

Max. Dis-

charge (A)

Max.

Charge (A)

Dimensions (mm) Approx.

Weight (kg)

± 0.15

IP Degree L W H

LFP124 4.5 12.8 58 10 4.5 90 70 107 0.7 IP50

LFP126 6 12.8 77 10 6 90 70 107 0.8 IP50

LFP127 7.5 12.8 96 20 7.5 151 65 100 1.3 IP55

LFP1210 10 12.8 128 20 10 151 65 100 1.5 IP55

LFP1215 15 12.8 192 20 15 151 98 101 1.9 IP50

LFP1220 20 12.8 256 30 15 181 77 167 3.2 IP55

LFP1230 30 12.8 384 30 20 166 175 125 4.6 IP50

LFP1240 40 12.8 512 30 20 198 167 170 6.5 IP55

LFP1250 50 12.8 640 50 50 229 138 213 8.00 IP55

LFP1260 60 12.8 768 30 30 229 138 213 9.40 IP55

LFP1280 80 12.8 1024 30 30 258 166 215 12.8 IP50

LFP12100 100 12.8 1280 50 50 330 172 220 14.5 IP55

LFP12200 200 12.8 2560 70 70 520 269 208 31.9 IP50


24V Series

Features

• Communication of monitored data via Battery

• Management System (BMS)

• Internal cell balancing

• Flame retardant plastics

• Built-in automatic protection for over-charge, over discharge and over temperature

• Maintenance free

• Thousands of cycles, 100%DOD, under normal conditions

• Can be charged using most standard lead-acid charges (set for AGM/GEL cells)

Model Nominal

Cap. (Ah)

Nominal

Voltage (V)

Nominal

Energy

(Wh)

Max. Dis-

charge (A)

Max.

Charge (A)


Weight (kg)

± 0.15

IP Degree L W H

LFP2410 10 25.6 256 30 10 181 77 167 3.2 IP55

LFP2420 20 25.6 512 30 20 198 167 170 6.5 IP55

LFP2430 30 25.6 768 30 30 229 138 213 9.4 IP55

LFP2440 40 25.6 1024 30 30 258 166 215 12.8 IP50

LFP2450 50 25.6 1280 50 50 395 110 293 15.5 IP55

LFP2460 60 25.6 1536 50 50 436 108 317 17.5 IP55

LFP24100 100 25.6 2560 50 50 520 269 208 31.9 IP50


48V Series

Features

• Long cycle life, more than 2000 cycles at 80% DOD.

• Only 40% of the weight of comparable capacity SLA battery.

• Built-in automatic protection for charge, discharge and temperature conditions.

• Internal cell balancing, to ensure that the consistency of battery capacity.

• Can be recharged quickly in 2.3hours.

• Can be recharged using most standard lead-acid

• chargers (set for AGM/GEL cells).

• Communication of monitored data via SMBUS of BMS

Model Nominal

Cap. (Ah)

Nominal

Voltage (V)

Nominal

Energy (Wh)

Max. Dis-

charge (A)

Max. Charge

(A)


Weight (kg)

± 0.15 L W H

LFP4810 10 48 500 10 5 442 285 44 8

LFP4820 20 48 1000 20 10 442 285 88 14

LFP4830 30 48 1500 30 10 442 370 88 23

LFP4840 40 48 2000 40 20 442 430 88 27

LFP4850 50 48 2500 50 20 442 440 135 31

LFP4875 75 48 3750 75 30 442 400 177 40

LFP48100 100 48 5000 75 30 442 520 205 56

To cater to the growing requirements of Power in the market, we at “Naviya Technologies”, are

committed to provide quality Solar PV Systems in the market. We are a Solar PV EPC Company.

We have progressively acquired a reputation for Design, Supply, Installation & Commissioning of

high quality and cost-Effective solutions to a wide spectrum of industries and areas. We operate

in the below domain of Solar PV Systems.

GOVERNMENT SECTOR

CLIENTELE

BANKING SECTOR

CLIENTELE

PRIVATE SECTOR

CLIENTELE

CREDENTIAL

For details, please contact at

Naviya Technologies # 117, Gundecha Industrial Complex, Akurli Road,

Kandivali (East), Mumbai—400 101, Maharashtra.

Tel.:- 022—42644112

Email:- [email protected]

an energy solution ompany - naviya tech

Documents