angle variations color variations possible embossed ... · captron electronic gmbh...
TRANSCRIPT
CAPTRON Electronic GmbHJohann-G.-Gutenberg-Str. 782140 Olching, Germany
Tel.: +49 (0)8142 - 44 88 -0Fax: +49 (0)8142 - 44 88 -100
As o
f: 20
19_0
9_26
• Significantly simplified assembly, complete without MH-95 mounting aid
• New BF7-95 mounting flange allows easy positioning directly on the profile
• The new AR5-2X# cover color ring is downward compatible with the current BF-95 and BF-95/PL mounting flanges
• TSI-PRM certified (variant dependent) Regulation (EU) 1300/2014
• No change in external dimensions
The new CHT7 SENSORswitch
1 Glass pane
2 BF7-95 mounting flange mountable without MH-95 mounting aid
3 SENSORswitchnot combinable with the current BF-95 and BF-95/PL mounting flanges
4 AR5-2X# cover color ring downward compatible, new design
Angle variations
RAL 7042 RAL 9017RAL 5015 RAL 3020RAL 6024 RAL 1023
Color variations
Possible embossed pictograms Braille characters
CAPTRON Electronic GmbHJohann-G.-Gutenberg-Str. 782140 Olching, Germany
Tel.: +49 (0)8142 - 44 88 -0Fax: +49 (0)8142 - 44 88 -100
As o
f: 20
19_0
9_26
The new CHT7 SENSORswitch
CHT7-2 New design
CHT7-1 Current design
Deliverable as of: 03/2017 Deliverable by: 15.12.2019
• Significantly simplified assembly, complete without MH-95 mounting aid
• New BF7-95 mounting flange allows easy positioning directly on the profile
• Current BF-95 mounting flange, an exact positioning on the profile is only possible with the MH-95 mounting aid
• Current BF-95 mounting flange, not combinable with new sensor
• The new AR5-2X# cover color ring is downward compatible with the current BF-95 mounting flange
• TSI-PRM certified (variant dependent) Pursuant to Directive 1300/2014
• The current AR5-1X# cover color is not compatible with the new BF7-95 mounting flange
• No change in external dimensions
CAPTRON Electronic GmbHJohann-G.-Gutenberg-Str. 782140 Olching, Germany
Tel.: +49 (0)8142 - 44 88 -0Fax: +49 (0)8142 - 44 88 -100
As o
f: 20
19_0
9_26
The new CHT7 SENSORswitch
CHT7-2 New design
CHT7-1 Current design
Deliverable as of: 03/2017 Deliverable by: 15.12.2019
New SENSORswitch Current SENSORswitch
Due to the flatter structure of SENSORswitch, the new CHT7 is not combinable with the current BF-95 mounting flange.The possible combinations are listed in the table below.
Current BF-95 mounting flange
Current SENSORswitch Current AR5-1X# cover color ring
New mounting flangeBF7-95
New SENSORswitch
New cover color ringAR5-2X#
CAPTRON Electronic GmbHJohann-G.-Gutenberg-Str. 782140 Olching, Germany
Tel.: +49 (0)8142 - 44 88 -0Fax: +49 (0)8142 - 44 88 -100
As o
f: 20
17_0
3_21
The new CHT7 SENSORswitch
1:2 (DIN A4)
Held Kalus 27.10.2016
SENSORtasterCHT7-262P-30/#/T6
Kundenzeichnung / customer drawing
1/1
SeT-CHT7-262P-30-#-T6-KD -A
Datum/date:
Blatt/sheet:
Gewicht/weight (g):
Dokumentenart/document type:
Zeichnung-Nr./drawing-no:Artikel-Nr./article-no:
Oberflächesurface
Maßstab/scale:
Allgemeintoleranz:tolerance:
Geprüft von/checked by:Erstellt von/created by:
Werkstoff/material:
Datumdate
Geprüftchecked
Erstelltcreated
Änderungmodification
Die
Zeich
nung
dar
f oh
ne u
nser
e Zu
stimmu
ng w
eder
ver
vielfä
ltigt
noch
drit
ten
Pers
onen
ode
r an
dere
n Firm
en z
ugän
glich
gem
acht
wer
den!
The
draw
ing
may
not
be d
uplic
ated
to
third
par
ties
or m
ade
available
to o
ther
com
panies
with
out
our
cons
ent!
CAPTRON Electronic GmbH
www.captron.com [email protected]
63103
50,2100
4,222,5
15
13
14
All dimensions in mm
Technical data at 24 V and 20 °C
Operating voltage DC 24 V (16.8...32 V)
Load current Max. 400 mA
Output PNP-NO
Output impulse Ca. 300 ms
LED 1 8 green LEDs
LED 2 8 red LEDs
Reverse polarity protection Protects all cables
Short circuit protection Protected against short circuit and overload
Voltage drop Max. 3 V at 400 mA
Current consumption Max. 20 mA at 24 V
Operating temperature -30...+80 °C
Protection degree IP Front and rear IP69K, IP20 connector
Type of operation Capacitive
Operation force No operation force required
Connection JST Connector
Dimension drawing CHT7