APPEARANCE OF THE TANK BEFORE THE COATING

INSTALLATION OF THE SCAFFOLDINGS

INSTALLATION OF COMPRESSOR & PIPPING THE BLASTING POT

PREPARATION,TEST BLASTING FOR PROFILE & CHECK FOR PRESSENCE OF OIL

MATERIALS TO BE USED FOR THE INTERNAL COATING

CHECKING THE SURFACE TO A WHITE METAL FINISH

CONDUCT CHLORIDE TEST FOR SALT CONTAMINATION

TEST RESULT 1PPM (3 PPM IS THE MAXIMUM VALUE)

APPLICATION OF ENECON PUTTY TO THE JOINT & DEEPLY PITTED AREA

CONDUCT WET FILM THICKNESS DURING APPLICATION

1ST COURSE COATED WITH ENECON CHEMCLAD SC

2ND COURSE COATED WITH ENECON CHEMCLAD SC

APPLICATION FROM 3RD COURSE TO THE TOP AREA, 1ST PART

APPLICATION FROM 3RD COURSE TO THE TOP AREA, 2ND PART

APPLICATION FROM 3RD COURSE TO THE TOP AREA, 5TH PART

APPLICATION FROM 3RD COURSE TO THE TOP AREA, 3RD PART

APPLICATION FROM 3RD COURSE TO THE TOP AREA, 4TH PART

FINISHING OF THE TOP PART OF THE & THE ENTIRE 6 COURSE

BLASTING & PAINTING OF THE BOTTOM PART OF THE TANK

AREA BEING REPAIRED A 12X16 HOLE WAS MADE & DAMAGED THE COATING

FINAL APPEARANCE OF THE AREA AFTER THE REPAIR WITH ENECON PUTTY & OVERCOAT WITH CHEMCLAD SC

TANK 2 BEFORE ENECON CHEMCLAD SC APPLICATION

TANK 2 AFTER ENECON CHEMCLAD SC APPLICATION