ashley quad under - dekko · 3place template and pre-drill holes 4install ashley quad under to...
TRANSCRIPT
A
1 2 3 4 5
B
C
D
E
F
A
B
C
D
1 2 3 4 5
E
F
Tools Required
Page Number: 1 of 4
1 Remove Data Port Cover and Blank Adapters 2
3 Place Template and Pre-Drill Holes 4 Install Ashley Quad Under to Worksurface
* Front of Worksurface *
Pre-Drill (3) Holes
Note*Position template on undersideof worksurface in desired location.Template provides a 1/4” setback ifaligned with front of worksurface.
Note*Use (3) #6 x 1/2” Flat Head Wood ScrewsRECOMMENDED BUT NOT SUPPLIED
This device complies with part 15A of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interferencereceived, including interference that maycause undesired operation.
ASHLEY QUAD UNDERUnder Worksurface Mounting
Installation Instruction
- Conduit -
Install Data Port Options - (VGA,RJ45, HDMI, BLANK)
See Sheet #2 for Detailed Instructions*NOTE*
Part Number: G110193 Revision: BE.C.N. No: GD17-002663
2505 Dekko DriveGarrett, IN 46738Customer Service: 800.357.5622
POWER AND DATA
#15 TorxScrew Driver
or Wrench
All Tech Adapters Need to be Mounted in the “UP” Position. (Refer to the back of Parts)
*NOTE*
UP
UP
Data PortCover
BlankAdapters
VGAOption
BLANKOption
HDMIOption
RJ45Option
UP
UP
UP
UP
A
B8
76
3
5e
UP
HDMI
A
1 2 3 4 5
B
C
D
E
F
A
B
C
D
1 2 3 4 5
E
F
Tools Required
Page Number: 2 of 4
This device complies with part 15A of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interferencereceived, including interference that maycause undesired operation.
ASHLEY QUAD UNDERUnder Worksurface Mounting
Installation Instruction
- Conduit -
Part Number: G110193 Revision: BE.C.N. No: GD17-002663
2505 Dekko DriveGarrett, IN 46738Customer Service: 800.357.5622
POWER AND DATA
#15 TorxScrew Driver
or Wrench
All Tech Adapters Need to be Mounted in the “UP” Position. (Refer to the back of Parts)
*NOTE*
2.1 Install Data Tech Adapter OptionHDMITripp-LiteAllen-TelAMP TE-KroneBelden KeyConnect
Leviton Quick Port Extreme
Optical Cable Corp 5eOptical Cable Corp 6OrtronicsPanduit NetKey
Leviton Quick PortHubbell PremiseType F Coax
KEYSTONE
Belden EZ MDVO Panduit Mini-COM
Commscope Ortronics TrackJack Siemon Cable Retainer
(Universal)
(Specific) (Specific)
(Specific) (Specific)(Specific)(Specific)
22.2 Install VGA Connector to VGA Tech Adapters
VGAConnector VGA
Tech Adapter“Back”
VGATech Adapter
“Front”
B Install VGA Adapter Assembly into Unit
2.3 Install Blank Tech Adapter Option
BlankTech Adapter
Blank
VGA Front
VGA Back
Screws
(Specific)
(Specific)
ETC. (ET. AL.)
UP UP UP UP
UPUP
UP
AUP
UP
UP
UP
Tech AdapterKeystone “Universal”
(Shown) Screw#15 Torx Head
HDMI(Shown)
Data PortCover
Screw#15 Torx Head
HDMI
UP
UPUP
VGATech Adapter Assembly
Screw#15 Torx Head
Data PortCover
A
2 3 4 5
B
C
D
E
F
A
B
C
D
1 2 3 4 5
E
F
Tools Required
Page Number: 3 of 4
5 Route Conduit Option to Nearest PowerDistribution Source
Screwdriver needed for optionalpower cord mounting clamps.
* Front of Worksurface *
This device complies with part 15A of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interferencereceived, including interference that maycause undesired operation.
ASHLEY QUAD UNDERUnder Worksurface Mounting
Installation Instruction
- Conduit -
1
Part Number: G110193
ConduitFeed
LINE (BLACK)GROUND (GREEN)NEUTRAL (WHITE)
WIRE IDENTIFICATION
Revision: BE.C.N. No: GD17-002663
2505 Dekko DriveGarrett, IN 46738Customer Service: 800.357.5622
POWER AND DATA
#15 TorxScrew Driver
or Wrench
A
1 2 3 4 5
B
C
D
E
F
A
B
C
D
1 2 3 4 5
E
F
Page Number: 4 of 4
3.46
”
5.0”
*PR
E-D
RIL
L (3
) HO
LES*
*FR
ON
T O
F A
SHLE
Y 41
2 U
ND
ER*
*1/4
” SE
T BA
CK
FRO
M F
RO
NT
EDG
E**1
/4”
SET
BAC
K FR
OM
FR
ON
T ED
GE*
*FR
ON
T ED
GE
OF
WO
RKS
UR
FAC
E*
*ASH
LEY
QU
AD
UN
DER
DR
ILLI
NG
TEM
PLAT
E*
This device complies with part 15A of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interferencereceived, including interference that maycause undesired operation.
ASHLEY QUAD UNDERUnder Worksurface Mounting
Installation Instruction Template
- Conduit -
Part Number: G110193
10.0
”
NO
T TO
SCA
LE!
This template isNOT TOSCALE!
*SU
GG
ESTE
D S
ET B
AC
K*
Revision: BE.C.N. No: GD17-002663
2505 Dekko DriveGarrett, IN 46738Customer Service: 800.357.5622
POWER AND DATA