assembly instructions - bunk beds | hayneedle · assembly instructions thank you for purchasing...
TRANSCRIPT
Thank you for purchasing this quality product.Be sure to check all packing materials carefullyfor small parts which may have come loose in-side the carton during shipment. Separate,identify and count all parts and hardware.Com-pare with the parts list to be sure all parts arepresent.
!DO NOTTIGHTEN SCREWSUNTILCOMPLETELYASSEMBLED"
SAFETY WA RNINGS!
1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Donot remove warning label from bed.
2-Always use the recommended size mattress or mattress support, or both, to help prevent the likelihoodof entrapment or falls.
3- Surface of mattress must be at least 5” inches below the upper edge of guardrails.4- Do not allow children under 6 years of age to use the upper bunk.5- Prohibit more than one person on upper bunk.6- Periodically check and ensure that the guardrail, stairs and other components are in their proper posi-
tion, free from damage, and that all connectors are tight.7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.8-Always use the stairs for entering and leaving the upper bunk.9- Do not use substitute parts. Contact distributor or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should
be placed against the wall to prevent entrapment between the bed and the wall.12-Always use guardrails on both long sides of the upper bunk.13-The use of water or sleep flotation mattresses is prohibited.14-Keep these instructions for future reference.15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTINGTHE ASSEMBLY
Ins t tcio snrust itoc snur
ASSEMBLY INSTRUCTIONS
SIZE OFMATTRESSAND FOUNDATION (SUPPORT)
The total thickness must not exceed 9” inches. Do not use mattress without the proper bunkie board or safefoundation.Note:There must be at least 5” inches from top surface of mattress to top edge or guardrails.
TO OBTAIN PARTS, PLEASE CONTACT:
This bed is designed to use a twin mattress ( 37 ½”- 38 ½”x 74 - 75” ) and bunkie board (37 ½”x 74”).
REPLACEMENT PARTS.Replacement parts, including additional guardrails, may be obtained from place of purchase or originaldistributor.
STH-350 STAIRWAY BUNK BED REVERSIBLE
WOODCREST MANUFACTURING - PERU, INDIANA
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packingmaterial carefully for small parts which may have come loose inside the
carton during shipment. Separate, identify and count all parts and hardware.Compare with the parts list to be sure all parts are present.
“DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED”
IMPORTANT:
PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY
* Use of power tool to assemble this product will invalidate any claim and damage this product making unsafe !!!* Please assemble on a clean soft surface to avoid damage.
!
(Hammer)
+2:00 h
Tools Required
(Not includ)
01 Option 02 Option
PLEASE CHOOSE THE SIDE YOU WANT TO ASSEMBLETHE CHEST, LEFT OR RIGHT SIDE.
STH-350 STAIRWAY BUNK BED REVERSIBLE
(Not includ)
Identifying the Hardware/part list- Identify the hardware using the illustrations below.
5,0 x 40 Screw 4,0 x 25 ScrewE 3214
19
31
01
14
0321
01
Qty
Qty
Qty
QtyQty
Qty
C
7,0 x 50 Screw
5,0X35 Screw
7,0 x100 Screw 14Qty
10x100 Wood Dowel 15x100 Wood Dowel 8X30 Wood Dowel
6X20 Wood Dowel
1/4 110 ScrewA
D
G
J K
Qty
Qty Qty
16
03 01
Half MoonBQty
161/4"
F
H
L
NM
I
QtyQty
Qty
0,4 mm/ Hex Screwdriver 0,3mm/ Hex Screwdriver
Part List: STH-350 STAIRWAY BUNK BED REVERSIBLE
BB
01
X2
X3
X3
02
B
Qty
10x100 Wood Dowel
15x100 Wood Dowel
J
K
J
J
K
K
J
J
Qty
03
1/4 110 ScrewA 08
Qty
01Half MoonBQty
081/4"
01Qty
H
14Qty
8X30 Wood DowelL
M
M
M
LL
L
LL
L
L
L
M
12Qty
6X20 Wood DowelM
A
A
A
A
A
A
A
A
HH
HH
HH
HH
Drawer Front False
Drawer Back
BOTTOM BED
0,4 mm/ Hex Screwdriver
ATTENTION:SIDE RAIL WITHOUTHOLE !
LeftSideChest
LeftSideChest
RightSideChest
03 BB
B
TOP BED
1/4 110 ScrewA
Qty
08
Half MoonBQty
081/4"
C 7,0 x100 Screw 08
Qty
01Qty
H
04
F
F
F
F
The first slats must be fixed here at 3” from each headboard end.
!SIDE-RAIL
F
F
F
F
F
4,0 x 25 Screw 08Qty
F
A
A
A
A
A
A
A
C
C
C
C
C
C
C
C
H
H
H
H
H
H
H
H
H
HH
H
HH
H
0,4 mm/ Hex Screwdriver
ATTENTION
SIDE RAILWHIT HOLE !
Cx3
H
H
H
H
07 7,0 x 50 ScrewD
Qty
Dx2
Dx3
Dx2
Cx3
08
07
H
H
H
H
Dx2
Dx3
Dx2
Ex4+I
5,0 x 40 ScrewE 04Qty
01Qty
I0,3mm/ Hex Screwdriver
07 7,0 x 50 ScrewD
Qty
01Qty
H0,4 mm/ Hex Screwdriver
C 7,0 x100 Screw 03
Qty TOP BIG STAIR
CENTER SMALL STAIR
BOTTON MEDIUM STAIR
Ex2+I
Ex2+I
1º
2º
3º
09
10
Dx2
Cx3
Dx2
Dx3
Gx3
Gx2
Gx3
Gx3
Gx3
19 5,0X35 Screw
Qty
G
01Qty
H
GG
G
G
G
G
G
G
G
G
G
Gx3Gx3
Gx3
Gx3
0,4 mm/ Hex Screwdriver
07 7,0 x 50 ScrewD
Qty
H
H
H
H
C 7,0 x100 Screw 03
Qty
FIX THIS SCREWON FRONT AND BACK
EE
E
E
II
II
11
12
The first slats must be fixed
here at 3” from each headboard end.
!SIDE-RAIL
F
F
01Qty
I
4,0 x 25 Screw 08Qty
F
5,0 x 40 ScrewE 24Qty
F
F
01 step
EE
E
E
II
II
02 step
03 step
EE
E
EI
I
I
I
0,3mm/ Hex Screwdriver
Drawer Back
Drawer Front False
X3
X3
X3
13
14
Front
04 step
05 step
03Qty
N
N
09Qty
6X20 Wood DowelM
M
Mx3
4,0 x 25 Screw 15Qty
F
F
Fx5X3
X3
Drawer Front