att auto tools
DESCRIPTION
tools or the AT industryTRANSCRIPT
AUTOMOTIVETOOLS &
EQUIPMENT
ATEC TRANS-TOOL
OFFERS A
COMPLETE LINE
OF QUALITY
TOOLS AND
EQUIPMENT FOR
ANY TYPE OF
AUTOMOTIVE
SERVICE CENTER
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
UNDERCAR SERVICE GENERAL SERVICE SHOPa. Support & Holding Fixtures..............17
b. Fluid Evacuator, Injector And
Bleeding Systems..............................18-19
c. Shop Equipment ................................20
d. General & Specialty Tools ................21-27
e. MotorVac Products ............................28
Specifications and descriptions on products in this catalog may change without notice.
Copyright ©2007 ATEC Trans-Tool
All intellectual property and
copyrights reserved.
FEATURED PRODUCTST-0012-TP
TransPorterFluid Evacuator-InJector
TransTech IIIFluid Evacuator-InJector
From MotorVac
T-MV-MTT1100P T-1010-B
RUBBER TIPPEDBLOW GUN
VENTURI TIP
See Page 18 See Page 28 See Page 25
T-1010-BVT
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Tool Truck Dealer www.atec-trans-tool.com
16
Reproduction of this material in whole or in part is strictly
prohibited without prior written consent by ATEC Trans-Tool, LP,
including all part numbers, drawings, pictures, logos, or
descriptions. Reproduction of any or any part of these items
is civilly and/or criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Mobile Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
T-PT-950
T-PT-5-A
T-PT-500
T-PT-900
Support and Holding Fixtures
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
FENDER TO FENDERMAIN SUPPORT UNITFOR ENGINE
(includes 2 hangerassemblies w/ chains)
Engine support for allforeign and domesticvehicles - 4 cy, V-6, V-8,minivans (some minivansmay require T-PT-175adapter)
HOOD SUPPORT
Used commonly in shops that push dismantledvehicles outside their building. Prevents hoodfrom being damaged. Also works well in shopswith low clearance ceilings. Drops onto barassembly. [Refer to drawing of T-PT-200-D)
NORTHSTAR ARM
Used on V-8 Cadillacapplications. This item alsorequires the use of the T-PT-950
APV LUMINA. VANADAPTER SETMain beam adapter kitallows for attachment ofNorth Star Arm T-PT-900
Pontiac Transport Van, APVLumina Van, Olds Silhouette.
2” HANGER
Drops onto bar assembly
Locks in place
17
Main Beam Adapter Kit
Set Includes(1) Stock Tower Adapter(1) Large 8” Pad Support(1) Main Beam Adapter APV
(1) J-Bolt 7.5”(1) J-Bolt 6”(1) 3/8” Quick Release Pin
T-0180
T-0178JOGGLE JACK
SPECIFICATIONS ............ Foot Operated Travel ..............2”
Height (Screw Down) ..62” Support Plate ..........3/8” x 2” x 8”
Height (Screw Up)........82” Weight ................................34lbs
Designed with additional positive supportsfor extra safety. Complete with bolt tray.
Eases various installations. Lever operated forsupport only. A must for installing transmissions, gastanks, shocks, mufflers, and engines. Pedal foldsaway for storage. Can be used with single or twinpost lifts.
SPECIFICATIONS: .......... Estimated Capacity ......2900 lbs
Height (Screw Down) ..66” Support Plate..............3/8”x2”x8”
Height (Screw Up) ......75” Weight ..............................41 lbs
T-PT-175
T-PT-106
T-1256-A
ENGINEADAPTER BAR
For Ford Windstar andMercury Villager with 3.8split port fuel injectionengines with large blackplastic intake plenum(‘95 - up only)
UNIVERSAL ENGINE BRACKET SET
This set offers 3 different brackets that can bebolted directly to the engine, which providesplaces to support the engine.
ENGINE HANGER
Supports and holds theengine in position when thetransmission, transaxle orengine mounts are discon-
nected. Assures that the engine remains in position forremounting after service. Engine may be slightly raised orlowered by turning the foot adjusting screws. Adapts to themid engine Fiero. Fits 440-TA/ATX and other popular F.W.D.applications.
Illustrated with
hood support
T-PT-500
HIGH AXLEHANDLE
T-PT-200-D
Reproduction of this material in whole or in part is strictly prohibited without prior written
consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally
punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
Fluid Injectors, Evacuators, Bleeding
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
T-0012-TPHCA
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
No Other ToolDoes So
Much, So FastAnd With No Mess!
REDUCE LABOR COSTS - INCREASE PROFITSIn seconds, with this simple-to use tool, drain and fillany viscosity fluid, (even heavy gear grease). TheTransPorter’s patented design fits into hard to reachopenings and eliminates messy drips and spills.Requires pressurized air and/or vacuum source.Patent #5738499
HHYYDDRRAAUULLIICC CCLLUUTTCCHH BBLLEEEEDDIINNGG AADDAAPPTTEERRSAVE BIG ON LABOR!
Turn this labor-intensive job into a one
man - 10 minute job!
T-0012-TPC
T-0012-TPH
T-0012-TPOT-0012-TPL
T-0012-TPTLID “O” RING SEAL
METAL HANGING BAR
CANISTER BASE LID W/ RELEASE VALVE
HOSE - 3’ and 4’ Length
Flushing Overfill Transmission Drain-Refill Differential Radiator-Antifreeze
Coolant Line Fluid Removal Without Removing Evacuation From
Cover Underhood
SOME APPLICABLE USES:Heavyweight Gear Grease * Power Steering * Oil Treatment
Call For a Detailed Brochureor Demonstration Video
18
T-0012-TP
T-1010-BVT VENTURI BLOW GUN TIPSee Page 25
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT SHOP
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Mobile Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
T-9100- A
T-9100- B
T-9100- D
T-9100- C
ROUND TOP MASTERCYLINDER ADAPTER
Fluid Injectors, Evacuators, Bleeding
BLEEDER HOSE
REFILL BOTTLE
TANDUM MASTER CYLINDER ADAPTER
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
T-9100 (Brake Bleeder)Replacement Parts
UNDERCAR, GENERAL SERVICE AND SHOP
Shop Equipment
LIFT DRAIN DRUM DOLLY(Use with T-0197)
T-0184- C
T-0184- A
T-0184- B
T-0197LIFT DRAIN
* 5 gallon capacity* 12” diameter top
(Use With T-0169 andT-0184-C )
DRUM DOLLY -55 Gal.
DRUM DOLLY -30 Gal.
T-0184DRUM DOLLY -16 Gal.
(Use with T-1090-HD)
19
T-0167LARGE SERVICE PAN
* Made of durable ribbedplastic for strength
* Big 24” x 34” sizeaccommodates evenlarge transmissions
* Holds up to 5 gallonsand has pouring spoutto help eliminate spills
T-0169FLUID DRAIN FUNNEL,UNDER HOIST TYPE
* Made of oil resistantplastic
* Sits on top of lift drain * Large 24” x 24” size
makes it ideal for allunder car service work
* Perforated drain, eliminates lost parts
T-9100-KIT
* Most efficient and economical way to bleed hydraulicbrakes, including ABS systems
* Avoid the mess and limitations of pressure bleeders* One man operation * 2 quart capacity* Exclusive EZMT plug * Air Operated* Works on vehicles with recessed bleeder screws* No cumbersome adapters to lose* No master cylinder cups or seals to damage
HYDRAULIC BRAKEBLEEDER KIT
T-9100 BRAKE BLEEDER ONLY
TOPTEN
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
Shop Equipment
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
T-MARK III
001730
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
OIL COOLER ANDLINE FLUSHER
* Completely selfcontained
* Closed filtering systemreuses cleaning fluid
* Positive displacementpump
* Carbon bearings forheavy-duty operation
* All bronze pump body* Replaceable filter
cartridge* Heavy-duty motor* Includes: hoses,
filter and fittings* Ready for operation* A must for late model
and lock up units
REPLACEMENT FILTER(For T-1090-HD...above)
TRANSMISSION OILCOOLER FLUSHINGSYSTEM
* Pulsating scrubbingaction of an atomizedsolvent and air mixture.
* Shop air is the onlypower source neededto operate.
* Complete flushing andsingle pass purgingcompleted in less than10 minutes.
* One to five year warranty
FILTERING SYSTEMNOW INCLUDED!
T-1091PULSATINGTRANSMISSION COOLER FLUSHER
Flushes cooler beforeinstalling rebuilttransmission.Air operated. Removable filter.Includes adapters andhoses. No solvents.
* Quick easy hook-up for flushingtransmission cooler
* Use with large flusher oraerosol cans.
For Ford 4R20E, 4EAT Chryslerdiesel truck, Mazda, Nissan,Infinity, B.M.W., Mercedes
T-3425
20
T-1090- HD
COOLER LINEBANJO FITTINGS
T-UNI-DOLLYJACK STAND ANDVEHICLE DOLLY
T-RN-430-ATECADJUSTABLEREBUILDER TABLE
With 360 degree rotation
and special access.
5 position side to side
movement with universal
mounting. Capable of
mounting most front and
rear wheel drive
transmissions.
Portable, adjustable
height and width.
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Mobile Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
T-0025- A
T-0034
T-0068
T-0010
T-0016- A
T-0016- B
T-0016- C
T-0025
T-0069
General & Specialty Tools
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
EZ SQUEEZEBEARING PACKER* Flush out old grease
with new* 4 second operation* No air hose needed* Packs 50-65 bearings
with 1 fill* For all cars & light trucks* Impact resistant * Patented
MAGNETIC TRAY
* 5.5” Round
* Stainless Steel
* Heavy Duty
MAGNETIC TRAY
* 9” x 5” Rectangle
* Stainless Steel
* Heavy Duty
MAGNETIC TRAY
* 11” x 10” Quad
* Stainless Steel
* Heavy Duty
REVERSIBLE SNAPRING PLIERS
RING LOC SNAPRING PLIERS
UNIVERSAL SEALPULLER* Insert tip of the tool
behind seal and
leverage works for you.
* Eliminates hammering
and digging.
COMPUTER PROGRAM SAVER
* Saves car computers,clocks, radios and otherelectrical componentswhen car batteries haveto be disconnected.
* Quick and easy hook-up.* Will save any computer
settings even if doors areopened by acident.
* Eliminates poor initialengine performance andlost digital settings aftervehicle service.
21
UNIVERSAL SEALDRIVER KIT
* Axle Seals
* Converter Seals
* Pinion Seals
* Metal Clad
* Grease Seals
* Everything you need to drive seals into a wide variety of
makes and models, foreign and domestic.
* Unique design holds garter spring in place while installing.
T-LI-PRO-MECH* Long reach with control not
available elsewhere
* Tapered jaw surrounds
stud, making contact at
multiple points
* High torque, durable
chrome vanadium steel
18” STUD & MANIFOLDNUT PLIERS
LifetimeWarranty
Reproduction of this material in whole or in part is strictly prohibited without prior
written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures,
logos, or descriptions. Reproduction of any or any part of these items is civilly and/or
criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
General & Specialty Tools
T-0154- SW
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHO
T-0154- R
T-0154- HD T-0163- C
T-0
T-0071
T-0070
T-0155
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
EXHAUST PIPESHAPER-EXPANDER* Eliminate exhaust leaks
by removing clamp
grooves and bent pipe.
* Works on or off car
* No holding fixture needed
* For all cars & light trucks
foreign or domestic
* Hex end allows use of
wench
MEDIUM SIZE Fits Pipe
1 13/16” to 2 1/2” I.D.
LARGE SIZE Fits Pipe
2 7/16” to 3 3/16” I.D.
T-0072
T-0087- APARTS BRUSH11” Nylon Bristle
PARTS BRUSH11” Hog Hair Bristle
SLIDE HAMMER SETHEAVY DUTY
* With 3/8” threadedshaft tip
RHINO SLIDE WEIGHT* 16 lb weight only
RHINO TRIO DEADBLOW SLIDE HAMMER
T-0163- DPRESSURE GAUGE
0 - 300 lbs
PRESSURE GAUGE0 - 100 lbs.
TORX BIT SOCKET KIT( 9 sizes)
Fits TORX size: T-10, T-15,
T-20, T-25, T-27, T-30,
T-40, T-45, T-50
* 6 smaller bits fit 1/4” drive
T-0087- H
SMALL SIZE Fits Pipe
1 3/8” to 1 15/16” I.D.
SLIDE HAMMERADAPTERSFor T-0154-HD
Remove front pumps in
domestic transaxles
T-3233
ADAPTERS FOR SLIDE HAMMER T-0154- HD
3/8” to 3/4” adapter3/8” to 5/16” adapter
3/8” to 1/2” adapter10 mm adapter
T-0154- A
T-0154- B
T-0154- D
T-0154- E
12 mm adapterT-0154- C T-0154- F
7/16” adapter
22
VACUUM PUMPHEAVY DUTY
T-0163- A
* Designed for pulling hubs when heavier weight is needed.
* 16 lb. slide hammer with E-Z slide bushing
* 3/4” diameter shaft * Extra HD construction
* Comfort grip handle
T-1079O-RING REMOVER
T-1079- AO-RING REMOVERWITH MAGNET END
T-1093UNIVERSAL DRIVERHANDLE
For threaded bushing drivers
Reproduction of this material in whole or in part is strictly prohibited without prior written consent
by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos, or descriptions.
Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Mobile Tool Truck Dealer www.atec-trans-tool.com
..................................... UNDERCAR, GENERAL SERVICE & SHOP
General & Specialty Tools
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
23
POSILOCK The only puller you’ll need!
2 JAW SeriesT-PS-202 1 ton, .25”- 3.25” Spread
T-PS-203 2 ton, .25”- 4.5” Spread
T-PS-204 2 ton, .5”- 5” Spread
T-PS-206 6 Ton, .5”- 7” Spread
T-PS-208 12 Ton, .75”- 12” Spread
T-PS-210 14 ton, 1”- 15” Spread
T-PS-213 25 Ton, 2.5” - 18” Spread
T-PS-216 35 Ton, 3”- 25” Spread
3 JAW SeriesT-PS-102 1 ton, .25”- 3.25” Spread
T-PS-103 2 ton, .25”- 4.5” Spread
T-PS-104 5 ton, .5”- 5” Spread
T-PS-106 10 Ton, .5”- 7” Spread
T-PS-108 17 Ton, .75”- 12” Spread
T-PS-110 20 ton, 1”- 15” Spread
T-PS-113 30 Ton, 2.5” - 18” Spread
T-PS-116 40 Ton, 3”- 25” Spread
Eliminates specialty pullers used for:battery terminal, steering wheel, powersteering, differential side bearing, breakdrum, timing gear and pitman arm.
T-PS-CH3 CRANKSHAFTDAMPER PULLER
Kit includes pullers andadaptors. Use withoutremoving radiator.Compact to allow easyaccess in tight, hard toreach areas.
T-PS-HP-2FAN HUBPULLER KIT
Includes T-PS-104 puller,2 colors and tip adaptor.Simplifies the removal ofmany industrial and auto-motive fans and blowerwheels by providing solidconnection betweenpuller and fan hub.
TRANSMISSION BEARING PULLERS
T-PS-TJ-1 . . . . . 2 Jaw, 2.33” - 14.75” Spread, 9.25” ReachT-PS-TJ-2 . . . . . 3 Jaw, 5” - 7” Spread, 6” Reach
WEB CONNECTION:www.atec-trans-tool.comLog on for:
Complete Product ListingsNewly Added ProductsProduct InformationFeatured Products
To provide the most up to date information, ATEC is consistently updating its web site. We
appreciate your patience if you are unable to connect to our site during an upgrading process time. You may always call us Toll Free 1-800-531-5978
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
General & Specialty Tools
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
24
T-0215UNIVERSAL HUB &BEARING TOOL KITSafely removes & installshubs and FWD wheelbearings w/o removingknuckle from the car.
T-0216UNIVERSAL HUB PULLERUse with T-0154-R toremove 95% of all FWDhubs.* No parts to wear out* Attaches to hub using
lug nuts from same car.
UNIVERSAL SEALINSTALLER KIT
(16 Pieces)* Installs 90% of metal
clad seals* Order handle T-0217-16
PINION SEAL INSTALLER KITFits most domestic car andtruck differential pinion seals,Holds garter springin place during installation[Use with T-0217-16]
DRIVER HANDLEUniversal
LONG DRIVERHANDLE
BEARING RACE INSTALLER Patented* Adjustable for all races
1 9/16” to 2 7/16” I.D.* Impact resistant head for
positive dead blow drive* Can use extension driver
T-0220-TH
CHRYSLERA404 / 413 / 470
727
904 / 999
GENERAL MOTORS125 / 125C 180 / 180C 200 / 200-4R / 200C
250 / 250C 325 / 325-4L 350 / 350C
400 440-T4 700-R4
Powerglide Super Turbine 300
DRIVES OVER 200DIFFERENT BUSHINGS - foreign and domestic
39 PIECE KIT- the most complete kit in
the industry
Comes complete with numberedapplication chart and board
All bushing drivers available individuallyFor handles refer to:T-0217-16 &T-0220-DRO6A
MASTER BUSHING DRIVER KIT
T-0217
T-0218
T-0217-16
T-0220- DR06A
T-0220- RI
T-0220-THLong Dead Blow Extension Driver
(use with T-0220- RI)
T-0220- 39
FORDA4LD AOD
ATX C-3
C-4/5 C-6
FMX Jatco
T-0220- 30BUSHING DRIVER KIT30 Piece
PHOTONOT AVAILABLE
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
* Easy assembly w/ manual * Storage case included* Chrysler puller adapter included attaches easily to axle shafts.
AUTOMOTIVE TOOLS & EQUIPMENT
T-0
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Mobile Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
General & Specialty ToolsT-1217BOOT SEAL CLAMPINSTALLER
TUBE BENDERFor all 3/16”, 1/4”, 5/16”and 3/8” O.D.Tubing(not recommended for 3/8” steel)
CONVERTORHOUSINGTORQUE BIT
T-1890COOLER LINE QUICKDISCONNECT TOOL
T-1892POWER STEERING LINEDISCONNECT TOOL
For ‘87 & up GM’s E, Kand V vehicles
T-1893- P
KWIK DISCONNECTTOOL
T-1893- MMetal - 3/8” (GM)
T-1895FUEL LINE QUICKDISCONNECTFOR FORDS
5/16” and 3/8”
T-1228
T-1550
T-1889REPAIR PART FORCOOLING LINE
Plastic - 3/8” (GM)
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
25
* Exclusive nylon form prevents kinkingor flattening. Perfect for bending fuel,brake, or cooling lines.
* Easy to use with one end of tubingconnected - or can be mounted ina vise.
* Bends up to 180 degrees
FITTING (2 pc set)(10 sets per order)
* Set includes 1- “O” ring& 1- plastic insert
* Fits Ford transmissions(Use with T-1890)
Removes push lockconnectors found at theradiator & transmissionconnections on ‘83 thrucurrent Fords and ‘82Continental overdrive.
[Repair Parts- T-1889]
* Allows plastic clip on thepower steering line quickconnector to be spreadapart for easy removal ofthe line without damagingthe connector seals.
T-0
T-1010- BBLOW GUN4” RUBBER TIPPED
* Insulated grip withergonomic design
* Optional built-in pressureregulator
* Variable flow control withcomfortable lever.
* 1/4” NPT inlet connection.T-1010- BVTVENTURI TIPFits all standard blow guns
RP-1010REPLACEMENT TIPFOR T-1010- B
T-1011RECOILINGAIR HOSE
1/4” x 25 foot
T-1072SNAP RING REMOVERAND INSTALLER
15” long handle
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
General & Specialty Tools
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
CLUTCH ALIGNMENTTOOL KIT (33 Piece) (supercedes T-2500)
T-2500- A
* 33 piece kit covers over 80% of foreign and domesticpassenger car and light truck applications.
* Made in the USA of high impact, oil resistant plastic* Save time and ensures accurate alignment every time.* Comes complete with board, pegs, and application chart.* Tools are available individually
T-2501- A
CLUTCH ALIGNMENT TOOL KITS * Saves time and ensures accurate alignment
* Includes board, pegs and application chart
* High impact, oil resistant plastic
26 PC ASIAN KIT Aligns over 95% of today’s cars, including Nissan, Toyota,
Suzuki, Honda, Subaru, Mitsubishi, Mazda & Hyundai
25 PC EUROPEAN KITAligns 95% of European cars, including BMW, VW, Audi, MG,
Porsche, Volvo & Mercedes
27 PC DOMESTIC KITAligns over 95% of Ford, GM & Chrysler vehicles.
T-2504
T-2503
T-2502
T-2505HYDRAULIC CLUTCHLINE DISCONNECTTOOL
For use on GM HM282/ 5 speed manualtransmission, Ford lighttruck & M5-R2 Cougar5 speed manualtransmission.
26
CHISEL BUSHINGCUTTER -SEALREMOVER
T-0280-C
T-1073SURGE PROTECTOR& SPARKSUPPRESSOR
12 Volt
* Protects car computersfrom voltage spikescaused by welding,short circuits caused bymechanical tools, andsparks caused bydisconnecting, checkingor charging batteries.SAVE THOUSANDS OF
$$$ in blown computers.
Kit Includes:(or purchase individually)
1.5” 10 splines 1.980”
1.75” 10 splines 1.180”
T-2501-HT175
T-2501-HT150
T-01.75” 10 splines .980”
1.75” 10 splines 1”
2” 10 splines 1.180”
T-2501-HT200
T-2501-HT175x1
T-2501-HT175A
TRUCK CLUTCHALIGNMENTTOOL KIT(5 Piece Kit)* Light weight-
easy to use
* Usescurl cut method
* Also use as tailpipe cutter
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Mobile Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
27
General & Specialty ToolsT-2513
T-2514
EZ SEAL & PILOTBEARING PULLER
(Patented)
* 3-segment designconforms to shape ofseal for maximumsurface contact
* Removes seal withoutbreaking it
* Unique hammeringhandle
* Use on any slidehammer with 1/2 - 1/3threads
* Easy roll in feature
NO ROLL SLIDE HAMMER
* 4 lb weight
* Adapts to seal hooker &
dent puller
* 1/2 - 13 thread
T-5000- K
T-2512- AEZ SQUEEZETIE ROD ADJUSTER
(Patented)
* Automatically self adjuststo fit 90% of all tie rodsplit sleeve in all cars,vans, light trucks -foreign & domestic
* Made of high stresssteel & heat treated
* Two versions
3/8 ” ratchethandle
* Foreign anddomestic vehicles
* Automatic andstandard transmis-sion applications aswell as wheelbearing,axle and pinionseal applications.
UNIVERSAL SEALDRIVER KIT(23 PIECE)
WEB CONNECTION:www.atec-trans-tool.comLog on for:
Complete Product ListingsNewly Added ProductsProduct InformationFeatured Products
To provide the most up to date information, ATEC is consistently updating its web site. We
appreciate your patience if you are unable to connect to our site during an upgrading process time. You may always call us Toll Free 1-800-531-5978
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.
AUTOMOTIVE TOOLS & EQUIPMENT
Contact Your Local Distributor PH: 1-800-531-5978 24 Hr. FAX 210-225-2114or Tool Truck Dealer www.atec-trans-tool.com
UNDERCAR, GENERAL SERVICE AND SHOP
GE
NE
RA
LS
ER
VIC
E &
SH
OP
TO
OL
S-E
QU
IP
28
MotorVac Products
T-MV-MV3
T-MV-MCF5000
T-MV-MCS245T-MV-LC210
T-MV-MTT1100P T-MV-MOF6000
COOLANTCLEANPROFESSIONALCOOLANT FLUSHSERVICE
Complete coolant flushand exchange in lessthan 15 minutes.
* “Closed Loop” mode toend of Service allows forunattended service.
* Professional system withoptional adapters forheavy duty application.
TRANSTECH III
The easiest ATFexchanger ever made
* Replaces virtually 100%of the dirty fluid in under10 minutes.
* Convenient drain panand fluid “fill” control fea-tures for easier filterexchange during ATFexchange.
GASOLINE ENGINECLEANER
LEAKCHEK PLUSACCURATE, FASTAND RELIABLEVISUAL LEAKDETECTION SYSTEM
* Illuminating visible vaportrace pinpoints leaks atthe source.
* Increased shopefficiency obtained byreducing diagnostictime.
MCS 245PROFESSIONAL FUELSYSTEM SERVICEAND DIAGNOSTICCENTER
* Advanced electronicinterface and uniquesafety features allowsystem to rununattended
* Cleans the entire fuelsystem, from theintake to the catalyticconverter.
OILCLEANCOMPLETE OILFLUSH SERVICECENTER
* Dynamic flushingprocess cleans entirelubrication system.
* No shop air or powerrequired due to aunique on-board aircompressor and 12volt DC power supply.
NEWITEM!
NEWITEM!
NEWITEMS!
Designed for use in MotorVac
Carbon Clean equipment as
well as any other fuel system
service that requires a fuel
cleaning mixture.
T-MV-MV3D T-MV-MV4DIESELENGINECLEANER
Specially formulat-
ed to safely restore
horsepower, lower
emissions and
improve mileage.
INTAKECLEANER
A proprietary
detergent formula-
tion for decoking
intake plenums
and cleaning throt-
tle plates and idle
bypass circuits.
NEWITEM!
NEWITEM!
NEWITEM!
Reproduction of this material in whole or in part is strictly prohibited without prior written consent by ATEC Trans-Tool, LP, including all part numbers, drawings, pictures, logos,
or descriptions. Reproduction of any or any part of these items is civilly and/or criminally punishable by law.