8/10/2019 Attachment 5.5.17 - Checklist for Inclination Test Rev 2

1/2

Descriptions Date Planned Date Actual In-charge Remarks

1 Preparation

1 Overall in charge of operation Tuan/Tan AH

2 Inclination test date to be confirmed 25-Feb3 Engineering to provide approved test procedure for Inclination test by LTI Engineering Done

4 Location of inclination test Engineering Wharf side

5 Survey inclination test location Engineering

6 Hire tug boats and work boats for the operation 23-Feb Cng LV

7 Spud can/ Leg position for each leg during the inclination test to be determined Engineering 8.5 feet

8 Schedule for events for the entire inclination test including sequence of works to be carried out Chnh

9 To obtain forecast of weather condition for operation day Ready Cng LV

2 Production Preparation/ Operation Readiness Check

1 Cantilever weighing operation to be completed done Production Certified by ABS

2 Preliminary audit of lightship weight to be carried out 1 week before inclination test 22-Feb Engineering/Production

Final Carried out with ABLTI

3 Secure all movable items onboard e.g. crane, derrick travelling block, 22-Feb Tao/Bang

4 Cantilever to be in stowage position Bang

5 Mark cantilever travel position for inclination test (8 position) 22-Feb Tao/Bang/Viet 46 ft travel finalised

6 All tanks to be cleaned and dry unless specified in the test procedure 23-Feb Bang/Tao

7 Preparation of central control station onboard Engineering refer to organ chart

8 Means to measure water depth at operation location e.g. echo sounder on rig done Engineering

9 Install pendulum at 3 locations as per test procedure 21-Feb Huy/QC Viet

10 Ensure skidding system for cantilever and drillfloor are operational and done as per TP Commissioning Done

11 Check and ensure no obstruction or restriction in the skidding path of cantilever prior to the test Bang12 To check and ensure Jacking motors has sufficient gear oil level 20-Feb Bang

13 Ensure Jacking system is functional including inclination monitor Bang ready

14To arrange for essential vendors/ personnel to be onboard during the test e.g. VSP barge captain, LTI

for inclination test and jacking systemProduction/PMT

refer to organ chart

15 All necessary operational and commissioning tools to be onboard Commissioning refer to equipment chec

16 Punch mark for freeboard measurement to be marked as per TP 21-Feb Huy/QC Viet

17 Prepare tools and equipment to clean up spud can 24-Feb Production

18 Pull and free spud can prior to inclining test 23-Feb Production

19 Nylon ropes for rig handling 22-Feb Trung

3 Logistics Preparation

1 To disconnect shore power, gases, air supply to rig 23-Feb Tuan/Bang

2 To remove gangways before Jacking up 23-Feb Linh NN

3 To provide portable toilet facilities 21-Feb Huy Re-location to Maindeck

4 To prepare food and drinks during the inclination test Chnh

4 Safety

1 Emergency procedure/ plan for fire fighting and other emergencies 23-Feb morning Safety Hai

A bl f ll l d i i S f H i

Attachment 5.5.17 - Production Checklist for Inclining Test

8/10/2019 Attachment 5.5.17 - Checklist for Inclination Test Rev 2

2/2

9-Feb-12

Next week Remark

Cum. Planned

Activity

Completion

Cum. Actual

Activity

Completion

Cum. Planned

Activity

Completion

Cum. Actual

Activity

Completion

Incremental Balance

Cum. Planned

Activity

Completion

Preparation 9

Production Preparation/ Operation

Readiness Check19

Logistics Preparation 4

Safety 7

Inclination Test 7

Total 46

Attachment 5.5.17 - Production Checklist for Inclining Test - SUMMARY OF REMAINING ACTIVITIES

Updated as at:

Items TotalTotal

Outstanding

Last week This week