attachments - deere

John Deere Werke Mannheim

5020 Series Tractors RII

ATTACHMENTSIssue 08-2010

Issue 08-2010 (EAME) ATTACHMENTS - FACTORY AND FIELD INSTALLED 5020 Series Tractors-2

ATTACHMENTS - FACTORY AND FIELD INSTALLEDA short description and recommendation of some ofthe various factory and field installations is given.

Please note that the information, codes bundlenumbers are given for reference only, the currentprice list must be the only official orderingdocument.

Where factory installation codes or field installationbundle numbers were not available, they will be madeavailable as soon as possible.

1 Drive System

1.1 FRONT PTOThe front PTO features counter clockwise rotating, 6spline PTO shaft and is able to transmit 100 % ofengine power.

Models: 5620-5820

Note:The following parts are NOT included in thefield installation kit; if required, they must beordered separately:

Code Bundle Description8777 LG100026 Front PTO (1000 rpm) installation kit

Bundle Description Remark QTY

AL205515 Control unit (BCU) only up to tractor serialno. 415525 1

AL158734Adapter harness(front PTOactuating swith)

only for tractors withPowrQuad transmissionup to tractor serial no.418158

1

AL163014 Indicator light(front PTO)

only for tractors withPowrQuad transmission 1


1.2 UNDERDRIVE TRANSMISSIONThis field installation kit includes beside thetransmission parts as well the universal joint, thecorresponding lines and the cab actuating components.

Models: 5620-5820

Note: The following parts are NOT included in thefield installation kit; if required, they must beordered separately:

1.3 COVERS

Models: cab only: 5620-5820

Note:This Kit is no longer available, please orderindividual parts according to parts catalog.

Code Bundle Description

LG100028 Underdrive transmission fieldinstallation kit


RE222616 Clutch cable withabsorber

only for all tractors withPowrQuad transmissionup to serial no. 437515

1


only for all tractors withPowrQuad transmissionfrom serial no. 437516

1


only for low profile tractorswith PowrQuadtransmission up to serialno. 437515

1


only for low profile tractorswith PowrQuadtransmission from serialno. 437516

1


AL168770 Covers for electro-magneticshift valves


2 HYDRAULICS

2.1 SELECTIVE CONTROL VALVES- SCV

The selective control valves provide a full range offeatures to meet customers’ exact requirements.

The 105 SCV has three positions.

The 205 and 305 SCV’s have a four position double orsingle acting function in the cab using lever.

The lockout device allows the lever to be locked intoraise, lower or neutral position.

ISO couplers are mounted to each SCV.

105 Series SCVThis valve features:

• A 3 position lever control.• Flow of up to 60 l/min is available through

the valve.• A load check valve on the raise/extend port

prevents loader and implement linkage creep.

Models: 5620-5820

Note: if not already installed, SCV mounting kits (seeat the end of this section) and control lever kits(see operator’s station section) have to beordered in addition

205 Series SCVIn addition to the features of the 105 series valve, the205 series valve offers a float position.

Models: 5620-5820


Code Bundle DescriptionLG101905 105 Series SCV



305 Series SCVIn addition to all of the features of 205 series SCV’sthe 305 offers:

• Selectable detents allow the switching between“No detent”, ideal for loader operation, and“Mechanical detent”, for continuous hydraulicmotor operation.

• The control dial is located on the SCV and may bereached from the operator’s seat.

• Neutral start protection releases lever to neutralwhen the engine is switched off.

• A hydraulic detent, where the SCV lever willremain selected until a pre-set pressure is reached.

Models: 5620-5820

Note: Please consider that a 305 Series SCV can onlybe installed once and it has to be installed at theleft-most position.


Quick Couplers

Models: 5620-5820


Code Bundle DescriptionLG100671 Set of 2 quick couplers


Dust protection for quick couplersThe dust protection kit for quick couplers has to beordered depending on the number of SCV’s mountedto the tractor - one is needed for each SCV. The kitincludes the dust protection cover, tubes, connectionsand seals to equip for one SCV.

Furthermore a SCV oil spillage reservoir is neededbecause when connecting or disconnecting quickcouplers, especially under pressure, there always leaksa small amount of oil from the system. This reservoircollects these oil leaks and therefore avoids a soiledrear of your tractor, where dust and particles easilyadhere.

Models: 5620-5820

Note: This Kit is no longer available, please orderindividual parts according to parts catalog.

Note: If a SCV oil spillage reservoir for fieldinstallation is needed, please order in addition:

Models: 5620-5820

Note: from tractor serial no. 492006Note:The following part is NOT included in the field

installation kit; if required, it must be orderedseparately:

Code Bundle DescriptionLG100672 Dust protection for quick couplers

Bundle Description Remark QTYL100937 Spillage reservoir 1L101404 Cover for spillage reservoir 1AL163579 Bracket 1L65382 Hose ID7.5 - 10000 mm 124M7099 Washer 119M7946 Cap screw 1

Code Bundle DescriptionLG101650 Dust protection for quick couplers

Bundle Description Remark QTYL65382 Hose ID7.5 - 10000 mm 1


Mounting Kits for SCV’swithout frontloader

Models: 5620-5820

Models: 5620-5820

Models: 5620-5820

Mounting Kits for SCV’s with frontloader

Models: 5620-5820

Models: 5620-5820

Models: 5620-5820


AL161409 Mounting kit for SCV at Position 1(w/o frontloader)


AL161410 Mounting kit for SCV at Position 2(w/o frontloader)


LG100680 Mounting kit for SCV at Position 3(w/o frontloader)


AL161412Mounting kit for SCV at Position 1(with frontloader in combination withmulti function lever)


AL161413Mounting kit for SCV at Position 2(with frontloader in combination withmulti function lever)


LG100683Mounting kit for SCV at Position 3(with frontloader in combination withmulti function lever)


Additional shut-off valves for selectivecontrol valvesThe shut-off valves can be installed to prevent leakageat the hydraulic SCV connections.

Models: 5620-5820Note: This Kit is no longer available, please order

individual parts according to parts catalog.

Models: 5620-5820

Field Kit for providing hydraulic powerto front-end attachments

Models: 5620-5820

Code Bundle DescriptionRE245990 Shut-off valve (standard)

Code Bundle DescriptionAL174688 Shut-off valve (deluxe)


LG102072 Field Kit for providing hydraulic powerto front-end attachments


3 ENGINE

Bottom Guard for Fuel tanks

Recommended in adverse conditions, like scrub,woodland or land reclamation.

Models: 5620-5820

Note: for vineyard tractor version please orderRE251707 (bottom guard for 114 l tank) instead

Fuel Preheater

Models: 5620-5820

Note: for Level 4 engine, i.e. for BoschVP44 injection pump

Coolant heater

Models: 5620-5820

Servicedoors

Models: 5620-5820

Models: 5620-5820


8875 LG100031 Bottom guard for fuel tank(for 130 l tank)

Code Bundle DescriptionAL159374 Field installation kit for fuel preheater

Code Bundle DescriptionAL151508 Engine coolant heater 220V

Code Bundle DescriptionLG100539 Servicedoors deluxe exhaust

Code Bundle DescriptionLG100540 Servicedoors vertical exhaust


Radiator Screen

Models: 5620-5820


Note: for tractors with air-conditioning only

Code Bundle DescriptionLG100011 Field Installation Kit for radiator screen


4 ELECTRICAL - ELECTRONICAL COMPONENTS

4.1 LIGHTS

Beltline Headlights H4

When a loader or a front linkage mounted implementobscures the beam of the normal head lamps a BeltLine Headlight H4 is necessary.

Models: 5620-5820

Note: not compatible with H3 working lights beltline-mounted (code: 9071)

Note: The headlights are secured to the turn-signal/clearance light mountings at left and right, andthan connected there.

Models: 5620-5820

Note: not compatible with H3 working lights beltline-mounted (code: 9071)

Note: The headlights are secured to the turn-signal/clearance light mountings at left and right, andthan connected there.

Working lights H3 - Beltline-mounted

Models: 5620-5820

Note:not compatible with H4 headlights beltline-mounted (code: 9070)

Note:The work lights are secured to the turn-signal/clearance light mountings at left and right, andthan connected there.

Work lights (rectangular shaped)

As standard the John Deere 5020 series tractor isequipped with 2 roof mounted working lights at thefront, and with one roof mounted working light at therear. If you need at the left hand side an additionalrectangular shaped work light please order thefollowing kit.

Models: 5620-5820

Note:The additional work lights are secured to thethreaded holes that already exist in the rear ofthe roof.

Note:not compatible with LG102404


9070 AL200914 2 beltline-mounted headlights H4, forright hand traffic (rectangular shaped)


AL200913 2 beltline-mounted headlights H4, forleft hand traffic (rectangular shaped)


9071 AL2009122 additional working lights H3 beltline-mounted (oval shaped), on turn-signal/clearance lights on cab frame


LG1000211 additional work light (rectangularshaped), mounted at rear cab roof,left hand side


Work lights (oval shaped)

Models: 5620-5820

Note: The additional work lights are secured to thethreaded holes that already exist in the front ofthe roof.

Note: not compatible with LG100021Note: for vineyard tractor version only 2 work lights at

front and 4 work lights at rear cab roof could beinstalled

Corner Lights

Models: 5620-5820

Beacon light

The Beacon Light is easy to mount.


Note:On tractors up to serial number 436654, thebeacon light is installed on the left front post,regardless of whether traffic drives on the left orthe right side of the road.

Note:On tractors from serial number 436655, thebeacon light is installed on the RIGHT front postif traffic drives on the LEFT side of the road. Inthis case, order the RE192479 supportseparately through normal parts channels.

4.2 MISCELLANEOUS

Multiple power outlet socket strip

Six additional electrical outlets give either permanentor ignition key controlled power for such items as

• Computers• Portable telephone chargers• Implement monitor• Implement supply

12 V and up to 30 Amp total current can be taken fromthese outlets.

Models: 5620-5820


LG1024042 additional work lights (oval shaped),mounted at front or rear cab roof, lefthand and right hand sides

Code Bundle DescriptionAL202564 Corner Lights

Code Bundle Description9080 AL200910 Beacon light

Code Bundle Description9146 LG100586 Multi power outlet socket strip


Power Outlet Socket

Models: 5620-5820

Battery cut-off switchPerformance and power are very important foryour daily work with agricultural machinery, butsometimes power needs to be cut off. Forexample, when the tractor is left unattended orduring welding operations, when special safetymeasures need to be considered, the batteryshould be shut down.Therefore John Deere offers a battery cut-offswitch for field installation. This kit protect thebattery from damage resulting from short circuitsas well as from discharging due to monitors orradios left switched on when the engine is turnedoff. As a visual status indicator a LED lamp isturned on when battery is connected.In addition to this, a conversion kit is availableallowing to operate the battery cut-off switchconveniently from inside the cab and to react evenmore quickly in case of emergency. Pleaseconsider that in some countries it is mandatory forinsurance reasons to use this type of battery cut-off switch.

Battery cut-off switch outside cab


Note:From tractor serial number 409812Note:Up to tractor serial number 409811,

please order single partsNote:Depending on the battery typ used, one

item must be ordered separately if required.

Code Bundle Description9145 LG100567 3 pin power outlet socket


9015 LG171056 Electric battery cut-off switch(outside cab)

Bundle Description QTY

AL164364 Battery lead for 12V, 154 AH,700A battery 1

AL164483 Battery lead for 12V, 110 AH,500A battery 1


Battery cut-off switch inside the cab




LG102435 Conversion kit cut-off switchfrom outside to inside cab


5 MISCELLANEOUS

5.1 OPERATOR´S STATION

Super Air Comfort seat - MSG95

Air suspended seat features:• Air suspension with low frequency• Horizontal suspension 45 mm (1.77 inch) to damp

oscillations of implements, trailers at high speed orin difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.

• 80 mm (3.15 inch) vertical suspension travel toabsorb even the hardest shocks.

• Height adjustment (60 mm / 2.36 inch) for an idealseat position for every body size.

• Automatic weight adjustment• Pneumatic lumbar support• Backrest angle adjustment• Foldable armrests

(right hand with horizontal adjustment)• Seat heating• Telescopic backrest extension• Operator’s manual holder: always on hand and in a

tidy appearance.• Seat switch

Models: 5620-5820

Air Comfort seat - MSG93

Air suspended seat features:• Air suspension• Horizontal adjustment 150 mm (5.91 inch) for

easy positioning in the cab.• 80 mm (3.15 inch) vertical suspension travel to

absorb even the hardest shocks.• Backrest angle adjustment: Individual backrest

inclination supports the drivers back to preventpostural anomaly and reach an optimal seatingposition for a relaxed driving in all time.

• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety.

• Height adjustment (60 mm / 2.36 inch) for an idealseat position for every body size.

• Mechanical lumbar support• Horizontal suspension (45 mm / 1.77 inch) to

damp oscillations of implements, trailers at highspeed or in difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.

• Foldable armrests(right hand with horizontal adjustment)

• Operator’s manual holder: always on hand and in atidy appearance.

• Seat switch• Optional telescopic backrest extension

Models: 5620-5820


AL201825Super Air Comfort seat MSG95,air suspended with operatorpresence switch and seat belt Code Bundle Description

7631 AL179256Air Comfort seat MSG93,air suspended with operatorpresence switch and seat belt


Comfort seat - MSG83

Mechanical suspended seat features:• Mechanical seat suspension• Horizontal adjustment 150 mm (5.91 inch) for

easy positioning of the seat within the tractor cab• 80 mm (3.15 inch) vertical suspension travel to

absorb even the hardest shocks• Backrest angle adjustment: Individual backrest

inclination supports the drivers back to preventpostural anomaly and reach an optimal seatingposition for a relaxed driving in all time.

• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety

• Height adjustment (60 mm / 2.36 inch) for an idealseat position for every body size

• Foldable armrests(right hand with horizontal adjustment)

• Operator’s manual holder: always on hand and in atidy appearance.

Models: 5620-5820Note: Telescopic backrest extension AL174234

can be field installed.

Seat belt

Models: 5620-5820

Instructional seatThe comfortable, soft-moulded instructional seat,complete with backrest, is located to the left of theoperator. Due to the overall roominess of the cab, theinstructional seat has excellent access with plenty ofhead and shoulder clearance along with large leg-roomarea. A grab handle on the “A” post and an additionalgrab rail on the door will help the passenger to feelsafe and secure, even over rough terrain. When notrequired, the seat can be simply folded away.

Models: 5620-5820


7612 AL201829 Comfort seat - MSG83,mechanical suspended

Code Bundle DescriptionAL201826 Seat belt with mouting parts

Code Bundle Description9230 LG100459 Field kit for instructional seat


Leather steering wheelThe new dark-brown leather steering wheel is elegantin appearance and provides a comfortable grip evenduring long working days! It is produced in the high-standard John Deere quality and features the sameadjustability as the standard steering wheel.

Models: 5620-5820

Stainless steel heat protectionfor exhaust pipeFor an individual and elegant look John Deere offersthe new stainless steel heat protection for the exhaustpipe. It is produced in the high-standard John Deerequality which ensures durability and a long servicelife.

Models: 5620-5820

Safety belt for instructional seat

Models: 5620-5820

Code Bundle DescriptionRE282643 Dark brown leather steering wheel


AL178133 Stainless steel heat protectionfor exhaust pipe


9235 AL117734 Safety belt for instructional seat(with mounting parts)


Internal rear view mirrorThe additional rear view mirror is installed on theright-hand side of the rear window (in direction oftravel). It provides an excellent view on swingingdrawbar and rear-end attachments.

Models: cab only: 5620 - 5820

Telescopic Rear View MirrorsTelescopic mirrors offer manually adjustabletelescopic arms with manually adjustable mirrors. Themirror mounts are offset on the stem to allow forfurther adjustment and better head clearance whenentering the cab.



Rear Windscreen wiper and washer unitLarge rear windscreen wipers, with intermittentswitching, maintain good vision in bad weather.Micro-switches are used to isolate wiper motors whenthe windscreens are open.

Models: 5620-5820


AL151224 Additional inside rear view mirror,rear installation

Code Bundle Description7704 AL80126 Left hand telescopic rear view mirror

Code Bundle Description7705 AL80127 Right hand telescopic rear view mirror


9100 LG100019 Rear windscreen wiper andwasher unit


Performance Monitor

A performance monitor is available for all 5020 seriestractors with PowrQuad Plus transmission.

It can be installed on the upper right “A” post in thecab and is connected directly to the tractor’s electricalsystem via the on-board CAN-BUS communicationlink. This dedicated system allows the monitor to beintegrated with other tractor systems.

The unit features:• Accurate "distance travelled" measurement *• Display of true forward speed **• Programmable implement width function allows

accurate measurement of area covered *• Measurement and display of wheel-slip %, both

numerically and graphically, combined with visualand audible slip alarm. **

• This helps to boost productivity and reduce tyrewear *

• Work-rate calculation in area/unit time - a usefulmanagement tool to optimise work-rates.

• "Implement-up" and "Implement-down" modelinked to the quick raise/lower switch so that theheadland travel distance is not counted whenaccurate area measurement is required.

• Display of precise rear and front PTO speeds foraccurate monitoring of implement performance.

• Programmable service indicator allowing theoperator to select the number of engine hours tothe next service.

• An audible and visual signal indicates when this time has elapsed.

• This allows optimum service intervals forpeak tractor performance.

• Variable illumination intensity ensuring that theoperator can read the monitor easily, even at night.

The accuracy of the points marked * will be greatlyenhanced if the performance monitor is used inconjunction with a John Deere radar unit.

The points marked with ** can only be displayed inconjunction with the John Deere radar unit.


Note: If tractor is equipped with a tiltable frontwindscreen please order in addition R210066(Angle).

Note:Only for tractors with PowrQuad Plustransmission.

Loudspeakers and Antenna

Models: 5620-5820

Code Bundle Description9135 AL201701 Performance Monitor


9150 LG100024 Field installation kit for loudspeakersand antenna


Field office

The field office for the 5020 series tractors is a largeportfolio pouch where papers, operator manuals, musiccassettes, personal notes and implements information,or even a laptop computer can be stored. The entireunit is removable to be carried like a brief case. Itsbase is also pre-wired to accommodate electronicdevices like mobile telephones, or laptop computers.The lid provides a flat writing surface.

Models: 5620-5820

Chock Block

Models: 5620-5820

Note: Depending on the options of the tractor,additional spare parts may be required.

SCV Control Lever Kits forPowrQuad Transmission

The kits include cable and hardware.

Models: 5620-5820

Note:LG100475 (Control lever kit) has to be orderedseparately.

Models: 5620-5820


Models: 5620-5820


Note:Please order in addition R220156 (shift consolewith cut-out) for tractors with PowrQuadtransmission with a shift console without a cut-out (for position see picture).

Code Bundle Description9220 LG100633 Field office

Code Bundle DescriptionLG102426 Chock Block

Bundle Description Remark QTYAL156154 Bracket 1

Code Bundle DescriptionRE217624 Lever for SCV at position 1


Code Bundle DescriptionRE223225 Lever for SCV at position 3 (lower)


SCV Control Lever Kits forPowrQuad Plus TransmissionThe kits include lever, cable and hardware.

Models: 5620-5820

Note: LG100474 (Control lever kit) has to be orderedseparately.

Models: 5620-5820


Models: 5620-5820


Air conditioning system






AL200446 Air-conditioning system field kit, cabcomponents




* Measure dia. of existing belt pulley; if dia. is notstated, replace the belt pulley.



* Measure dia. of existing belt pulley; if dia. is notstated, replace the belt pulley.

Additional defroster louversMounted in the inner roof, the additional defrosterlouvers provide a defogging function of doors and sidewindows to ensure an unaffected vision for the driver.



Activated Carbon Air Filter

Cab air filters with activated carbon media are nowavailable for 5020 Series tractors. The filter kitincludes two activated carbon air filters and twoactivated carbon recirculation air filters, installationinstruction and safety information.


LG100012 Air-conditioning system field kit, linesand compressor without air brakes


L111600 2460 mm (96.85in.) long drive belt Only for 5820 tractors 1

L111601 2475 mm (97.44in.) long drive belt

Only for 5620 and 5720tractors 1

R128660* Pulley for fan (dia168) Only for 5820 tractors 1

R128661* Pulley for fan (dia183,5)



LG100013 Air-conditioning system field kit, linesand compressor with air brakes


L114293 2525 mm (99.41in.) long drive belt


L114468 2515 mm (99.01in.) long drive belt Only for 5820 tractors 1

R128660* Pulley for fan (dia168) Only for 5820 tractors 1


LG100253 Field installation kit for additionaldefroster louvers


These filters are a combination of dust and odour filterin one providing high efficiency and performancewithout air flow restriction in the cab.

This results in:• less irritation of eyes, nose and throat,• higher driving comfort,• a cleaner cab and• improves the operator’s working environment

The high-performance three-coat media filters 3micron particles with more than 99 % efficiency.Especially for plant protection and fertilizeroperations, powerful cab air filters are needed. Theamount of smallest dust particles and gaseoussubstances is reduced within the cab.


Note: For first installation on tractors up to serialnumber 519328, please order in addition2 x R262346 retraining frame.


AL175727 Activated Carbon FilterField Installation Kit


5.2 WEIGHTSPlease note that the weights displayed in this catalogueare available through EPDC (DNS-System/JDPoint).

Front base weights

Models: 5620-5820

Note: not compatible with Front PTO

Quick-Tatch Weights

Models: 5620-5820

Note: includes 10 x 50 kg left (L38449)and 10 x 50 kg right (L38450)

Front Weight Stop KitThe attachment kit includes two special couplingweights weighing 50 kg each that can be used within afront weight package to create a trailer coupling. Thetotal kit weighs 100 kg.

Models: 5620-5820

Mounting KitsFor 6 - 14 Quick-Tatch Weights

Models: 5620-5820

Models: 5620-5820


AL176563 Front weight support, 60 kg(for max. 14 quick-tatch weights)


AL71258 Set of 20 quick-tatch weights, 50 kgeach

Code Bundle DescriptionAL119964 Front weight stop kit, 2 x 50 kg


AL119967 Mounting parts for 6, 8, 10 quick-tatchweights


AL119968 Mounting parts for 12 & 14 quick-tatchweights


Pick up weight - 900 kgThe Pick up weight is the most versatile ballastingsolution. The Pick up weight can be attached on therear hitch.

Models: 5620-5820

Note: for tractors with MFWD only

Center link bracketRequired, if Pick up weight is used on the rear 3-pointhitch. Includes two spacer bushings, if 400 kg centrepick-up weight section only is used in the 3-pointhitch.

Models: 5620-5820

REAR WHEEL WEIGHTS

Rear wheel weight - 38,5 kg

Models: 5620-5820

Note: Includes first set of parts bolted to the rim(base mounting parts).

Models: 5620-5820

Note: Includes additional set of parts (if basemounting parts included in AL119955 areinstalled).

Rear wheel weight - 55 kg

Models: 5620-5820

Note: Includes first set of parts bolted to the rim(base mounting parts).

Code Bundle Description9508 AL112166 Pick up weight, 900 kg


9515 AL113121 Center link bracket for Pick up weight(with distance tubes)


9520 AL119955 Rear wheel weight set, 77 kg(2 x 38,5 kg)


AR56632 Rear wheel weight set, 77 kg(2 x 38,5 kg)


9525 AR56636 Rear wheel weight set, 110 kg(2 x 55 kg)


Models: 5620-5820

Note: Includes additional set of parts (if basemounting parts included in AR56636 areinstalled).

Models: 5620-5820

Note: Please order in addition mounting partsaccording to parts catalog.


AL119956 Rear wheel weight set, 110 kg(2 x 55 kg)


AL176898 Rear wheel weight set on palette,(20 x 55 kg)


5.3 CHASSIS PARTS

Base Mounting Kit for Front Fenders

Models: 5620-5820

Front Fenders

Models: 5620-5820


Models: 5620-5820

Models: 5620-5820

Models: 5620-5820Code Bundle Description

LG100707 Base mounting kit for front fenders

Code Bundle Description8841 LG100711 Front fenders, 310 mm width





Turnable front fendersThe new designed turnable front fender allows a bettersteering angle and therefore a significant bettermanoeuvrability of the tractor. The field installationkits include the LH and RH front fenders as well as allneeded mounting parts.

Models: 5620 - 5820

Note: for front loader application an additional fenderstop panel AL165335 has to be orderedseparately

For front tire sizes:• 11.2R20• 12.4R24• 320/85R24• 11.2R28• 280/85R28

Models: 5620 - 5820


For front tire sizes:• 360/70R24• 13.6R24• 340/85R24• 380/70R24• 420/65R24

Models: 5620 - 5820


For front tire sizes:• 440/65R24

Rear Fender Side Extensions

The fender extensions are now a one piece design.

They are compatible for use with snow chains on therear wheels, for example for forestry or snow clearingapplications.

Models: 5620-5820

Note:not for vineyard tractor version

Code Bundle DescriptionLG102498 Turnable front fender, 355 mm width



Code Bundle Description8900 LG100448 Rear Fender side-extensions


5.4 AXLES

ExtensionsRear axleRear axle extensions are available to match differenttread settings.

Models: 5620 - 5820

Note: Increased tread setting from 1912 mm-1976 mm

Models: 5620 - 5820

Note: In combination with rear wheels with bolt circlemeasuring 203 mm in dia.


Front axle

Models: 5620 - 5820



AL156776 Distance hub, 30 mm, for rear axleextension


AL156779 Distance hub, 44 mm, for rear axleextension


AL156778 Distance hub, 60 mm, for centeringthe front wheels


5.5 BRAKES

Hydraulic trailer brake

Models: 5620-5820


Pneumatic trailer brake

Models: 5620-5820

Note:For tractors not equipped with an air brakesystem ex factory.

Note:The air-brake system may be installed only if thetractor has a handbrake.

Note:For tractors without air conditioning system thefollowing parts are NOT included in the fieldinstallation kit; if required, they must be orderedseparately:

Note:For tractors with air conditioning system thefollowing parts are NOT included in the fieldinstallation kit; if required, they must be orderedseparately:

Code Bundle Description9350 LG101598 Hydraulic trailer brake

Bundle Description Remark QTYAL163629 Oil line tractors with front loader 1

AL163628 Oil line tractors withoutfront loader 1

AL172774 Load Sense line tractors with front loader 1

AL172773 Load Sense line tractors withoutfront loader 1


LG101603 Dual-line and single-line air-brakesystem

Bundle Description Remark QTYL169220 Console 119M7742 Screw M 10 x 65 434M7190 Spring pin 14 x 14 2R128661 Sheave, fan 1L114290 Poly-V-Belt 1

AL157596 Roller with dusttube 1

L154170 Dust cap 1

Bundle Description Remark QTYL169220 Console 119M7742 Screw M 10 x 65 434M7190 Spring pin 14 x 14 2

L114293 Poly-V-Belt only for 5620,5720 tractors 1

L114468 Poly-V-Belt only for 5820 tractors 1L115093 Spring pin 11 x 8 2

19M8300 Socket head screwM 8 x 40 1

19M7657 Socket head screwM 8 x 25 1

R113050 O-Ring 2R33259 O-Ring 1L114670 O-Ring 1T143169 O-Ring 1RE213470 Refrigerant hose 1RE212132 Refrigerant hose 1


Models: 5620-5820

Note: Field kit LG100676 can be installed only if adual-line air-brake system has been installedbefore (only available ex factory).

Note: For tractors not equipped with a dual-lineair-brake system ex factory please order fieldinstallation kit LG101603 (dual-line and single-line air-brake system).

Note: The following part is NOT included in the fieldinstallation kit; if required, it must be orderedseparately:

Code Bundle DescriptionLG100676 Single-line air-brake system

Bundle Description Remark QTYL101118 Hose 12 x 1,5 1


5.6 STORAGE

Tool Box

An external detachable and lockable tool box withconvenient carrying handle is mounted to the maintractor frame on the right hand side.

It has the capacity to hold tools and a selection oflinkage balls, hitch pins and linchpins for implementattachment.

Models: 5620-5820

Note: for vineyard tractor version please order inaddition 1 x L151498 (angle) and 1 x 19M7946(cap screw) for installation at the left side of thetractor frame

Set of ToolsA set of tools is also available.

Models: 5620-5820

Additional Storage Container - 45l

With a capacity of 45 l and a 45 kg maximum payloadthis new sheet metal storage container offers additionalspace, e.g. for rubber boots, oil cans, bulky tools,grease guns etc.

Equipped with 2 handles at the side it can easily becarried. With the help of the included quick lock pinthe container can be closed rapidly.


8850 LG100025 Sheet metal tool box, mounted to mainframe, right hand side

Code Bundle DescriptionLG102428 Set of Tools


The fastening on the back allows a quick installation toall existing front weights: base weights, front weightsand the 900 kg pick up weight.

Models: 5620-5820

Note: 45 kg maximal payload; only for frontinstallation: attachable to base weights, frontweights and 900 kg pick up weight.

Code Bundle DescriptionAL120005 Storage container, 45 l


5.7 HITCHES AND ASSOCIATEDEQUIPMENT

Front Hitch KitIncrease the versatility and adaptability of a 5020Series tractor. The front hitch ensures the followingJohn Deere standards in terms of quality andreliability:

• Constant lifting force of 2200 dN• Double-acting• Fully-integrated design which allows loader work

without dismounting of the lower links• Compatibility with John Deere loaders• Operates with a rear-installed 205 series SCV

instead of an optional joystick

Models: 5620-5820

Note: The tractor must be equipped with at least one205 series SCV (LG101906) - or higher - to beable to operate the front hitch. In addition, one105 series SCV (LG101905) - or higher - isrequired for connection of the front quickcoupler.

Note:The following Kit is NOT included and no longeravailable. If required, please order individualparts according to parts catalog.

Support for mower chains and springsFront implements like mowers often require additionalfixing points at the tractor to guide and supportimplements with the help of chains or springs.

For this application John Deere offers a newpossibility to fix chains fast and conveniently. Tworacks fit perfectly to the John Deere front hitch and thepositioning of the racks provides an optimized anglefor linkage chains and springs in comparison to thefastening chains fixed to the center link base.


8820 LG102566Front Hitch Kit consisting of pre-assembled front hitch, multi-valve,required hoses and lines as well asmounting hardware


LG100801

Supplementary kit,accumulator andthird front quickcoupler as well astwo brackets formowing unitsuspension

The third front quickcoupler serves to providepressure oil as long as thefront hitch is raised. Theaccumulator providesdampening for morecomfort during shunting orwhen driving with raisedfront attachment. Thebrackets for mowing unitsuspension also allowattachment of the chainfor cutting height limit.

1


Models: 5620-5820

Hitch Holder for upper wagon hitchChanging the implement from trailer to three-pointhitch in the field and not knowing where to put theupper trailer hitch.

John Deere now offers the solution - the hitch holderfor the upper wagon hitch. The holder is a convenientsolution that can easily be mounted within minutesonto all kinds of front weights with coupling recess.The wagon hitch can easily be affixed and is stored ina convenient height you can reach without stooping.

The holder is adjusted with two fixing screws thatagain can be adjusted in two widths depending on theweight the holder has been mounted onto.

Models: 5620-5820

Release cables for draftlinks

Models: 5620-5820


Bundle Description Remark QTYR223524 Rack left hand side 1R223525 Rack right hand side 119M7611 Cap screw 424M7099 Washer 4

Code Bundle DescriptionAL165650 Hitch holder for upper trailer hitch

Code Bundle DescriptionLG100651 Release cables for quick couplers


Lock for draft link hooksWhen implements with asymmetrical load areattached, or when driving through high-growingbushes and trees, the draft links must be securedagainst opening accidentally.

Models: 5620-5820

Repair kit for automatic trailer hitches -if maximum permissible playbetween hitch and support is exceeded

Models: 5620-5820

Note: The following part is NOT included in the fieldinstallation kit; if required, it must be orderedseparately:

Automatic stabilizer barsAutomatic stabilizer bars offer for the respectiveimplements the possibility to have:

• lateral sway over a self defined lower range and nosway above, or

• no sway over the whole range

Models: 5620-5820

Drawbar for pick-up hitch

Models: 5620-5820

Standard swinging drawbarDrawbars are adjustable in length and offer a swingingfeature which can also be locked out.

Models: 5620-5820

Note:not compatible with pick-up hitchNote:Please order additional parts

according to parts catalog.

Models: 5620-5820

Note:not compatible with pick-up hitchNote:Please order additional parts

according to parts catalog.

Code Bundle DescriptionAL165485 Lock for draft link hooks

Code Bundle DescriptionAL177396 Repair kit for automatic trailer hitches


AL177398 Wire repair kitfor trailer hitch 1


AL206322 Automatic stabilizer bars, left handand right hand

Code Bundle DescriptionAL159328 Drawbar for pick-up hitch


RE214223 Standard swining drawbarwith hammer strap


R186772 Standard swinging drawbarwithout hammer strap


Guide Ball HolderTo store the guide balls for hook type 3 point hitch andtop link quick couplers just where they are needed.

Models: 5620-5820

5.8 VANDALISM PROTECTION KITS

Models: 5620-5820


Code Bundle DescriptionLG102636 Guide Ball Holder Cat. II


LG100538 Vandalism protection kit - lock for sidepanel and hood


Security door lock kitLocking the cab with an individual key, different fromthe standard ignition key, is helpful for many differentapplications of the tractor. John Deere therefore offersthe Security door lock field installation kit. It featuresan individual key system that prevents misuse of thestandard ignition key. This field kit providesindividual security by individual keys for allequipment kept inside the cab. The kit comes with fourkeys, in case of damage or loss a blank key can beordered.


Note: if needed please order in addition:

Lockable fuel tank cap

Models: 5620-5820

5.9 MISCELLANEOUS

Service Cab

Models: 5620-5820

Models: 5620-5820

Code Bundle DescriptionAL71345 Security door lock kit

Bundle Description QTYAL71350 Blank key 1

Code Bundle DescriptionAL113087 Lockable fuel tank cap


LG102378 Service Cab for tractors withPowrQuad transmission


LG102379 Service Cab for tractors withPowrQuad Plus transmission


Numerical Index

Bundle No. Page Bundle No. PageAL71258 24 AR56632 25AL71345 38 AR56636 25AL80126 18 LG100011 10AL80127 18 LG100012 22AL112166 25 LG100013 22AL113087 38 LG100019 18AL113121 25 LG100021 11AL117734 17 LG100024 19AL119955 25 LG100025 32AL119956 26 LG100026 2AL119964 24 LG100028 3AL119967 24 LG100031 9AL119968 24 LG100253 22AL120005 33 LG100448 28AL151224 18 LG100459 16AL151508 9 LG100474 21AL156776 29 LG100475 21AL156778 29 LG100538 37AL156779 29 LG100539 9AL159328 36 LG100540 9AL159374 9 LG100563 21AL161409 7 LG100566 20AL161410 7 LG100567 13AL161412 7 LG100586 12AL161413 7 LG100633 20AL165335 28 LG100651 35AL165485 36 LG100671 5AL165650 35 LG100672 6AL168770 3 LG100676 31AL174688 8 LG100680 7AL175727 23 LG100683 7AL176563 24 LG100707 27AL176898 26 LG100711 27AL177396 36 LG100801 34AL178133 17 LG101598 30AL179256 15 LG101603 30AL201701 19 LG101650 6AL201825 15 LG101905 4AL201826 16 LG101906 4AL201829 16 LG101907 5AL202564 12 LG102072 8AL206322 36 LG102378 38AL200910 12 LG102379 38AL200912 11 LG102404 12AL200913 11 LG102426 20AL200914 11 LG102428 32AL200446 21 LG102435 14

Bundle No. Page Bundle No. PageLG102498 28LG102499 27LG102500 28LG102501 27LG102502 28LG102503 27LG102566 34LG102636 37LG171056 13R186772 36RE214223 36RE217621 21RE217624 20RE217627 20RE223225 20RE245990 8RE282643 17

attachments - deere

Documents