atv-ssv catalogue emea 2012

2012 GENUINE PARTS |ACCESSORIES | RIDING GEAR

SKI-DOO® LYNX® SEA-DOO® EVINRUDE® JOHNSON® ROTAX® CAN-AM®

www.brp.com

© 2011 Bombardier Recreational Products Inc (BRP). All rights reserved. ® ™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. BRP reserves the right at anytime to discontinue or change specifications, prices, design, features, models or equipment without incurring any obligation. Some models and accessories depicted may not be available in your country.

2

Gear up for the ultimate ride

race active rider Lightweight, vented and easy-care apparel that’s a winner from top to bottom.

adventure distance rider Ergonomic, versatile clothes that adjust to the outside temperature on long rides.

recreational work & play rider Comfortable attire that combines great value and dependable performance.

At BRP, we know that being fully equipped with the right gear matching your riding style is a must. So based on which of these rider profiles you fit, we’ve got you covered.

Read the Side-by-Side vehicle (SSV) and All Terrain Vehicle (ATV) Operator’s Guides and watch the Safety DVD before driving. BRP highly recommends that all-terrain vehicle (ATV) drivers take a training course. ATVs can be hazardous to operate. For both ATVs and side-by-side vehicles (SSVs), the operator and passenger should wear a helmet, eye protection and other protective clothing. Respect the minimum age as required by law. For SSVs, fasten lateral net and seat belt at all times and passenger must be at least 12 years old and able to hold handgrips and plant feet while seated against the backrest. Never carry passengers on any ATV not specifically designated for such use. For ATVs, BRP recommends not to carry any passengers under the age of 12. Make sure that all laws, regulations, and BRP’s warnings / recommendations for ATV and SSV passengers are respected. Always remember that riding and alcohol/drugs don’t mix. Never engage in stunt driving. Avoid excessive speeds and be particularly careful on difficult terrain. Ride responsibly. BRP urges you to “TREAD LIGHTLY” on public and private lands. Preserve your future riding opportunities by showing respect for the environment, local laws and the rights of others when you ride. Always ride responsibly and safely. Never carry passengers on any ATV not specifically designated for such use. Highly skilled operators under controlled conditions appear in this brochure. Do not attempt these manoeuvres if they are beyond your skill level. Pictures taken outward, on private land. BRP reserves the right, at any time, to discontinue or change specifications, prices, designs, features, models or equipment without incurring obligation. Some models depicted herein may include optional equipment or not available in your country. Prices are based on Manufacturer Recommended Retail Prices. Please refer to your authorized Can-Am dealer for your own personalized quotation. Taxes not included. Depending on location, products are distributed by BRP European Distribution SA, BRP US Inc., BRP Australia Pty Ltd. or Bombardier Recreational Products Inc. ™, ® and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. CARLISLE is a trademark of Carlisle Companies. CHAMUDE and HIPORA are registered trademarks of Kolon Industries, Inc. CLARINO is a trademark of Kuraray Co. Ltd. COOLMAX is a registered trademark of INVISTA for durable fabrics. FOX is a trademark of FOX Racing Canada. GARMIN, MONTANA and NÜVI are registered trademarks of Garmin Ltd. iPod is a registered trademark of Apple Inc. KOLPIN, GUN BOOT and IMPACT are registered trademarks of Kolpin Powersports Inc. KYB is a registered trademark of Kayaba. HIGH SIERRA is a trademark of High Sierra Sport Company. LEXAN is a trademark of General Electric (GE). MicroSD is a registered trademark of SD Card Association. NEXT G-1 VISTA is a trademark of Next Camo, LLC. NGK is a registered trademark of NGK Spark Plugs, Ltd. PRIMALOFT ONE and PRIMALOFT CRESTA are registered trademarks of Albany International Corp. TEFLON, TEFLON HT and KEVLAR are trademarks of E.I. DuPont de Nemours & Co. TWINAIR is a trademark of Twin Air USA. UNI is a trademark of UNIFILTER Inc. VELCRO is a registered trademark of Velcro Industries. WARN is a trademark of Warn Industries Inc. YUASA is a registered trademark of YUASA Batteries Inc. All other trademarks are the property of their respective owners. © 2011 Bombardier Recreational Products Inc (BRP). All rights reserved.

RIDING GEAR6 RACE

10 ADVENTURE

14 RECREATIONAL

16 SPORTSWEAR

23 GLOVES

26 HELMETS

32 GOGGLES

34 KIDS&TEENS

34 BAGS

35 SIzINGCHART

&TECHNICALTERMINOLOGy

PARTS & ACCESSORIES36 OUTLANDERTMATV

50 RENEGADETMATV

60 DS450TMATV

65 DS250TMATV

66 APACHE360TRACKKIT

68 PLOWS

73 WINCHES

75 DECALS/MULTI-FIT

76 COMMANDERTMSSV

92 OFFICIALLICENSED

PRODUCTS

94 OILS&MAINTENANCE

3

Gear up for the ultimate ride

race active rider Lightweight, vented and easy-care apparel that’s a winner from top to bottom.

adventure distance rider Ergonomic, versatile clothes that adjust to the outside temperature on long rides.

recreational work & play rider Comfortable attire that combines great value and dependable performance.

At BRP, we know that being fully equipped with the right gear matching your riding style is a must. So based on which of these rider profiles you fit, we’ve got you covered.

Read the Side-by-Side vehicle (SSV) and All Terrain Vehicle (ATV) Operator’s Guides and watch the Safety DVD before driving. BRP highly recommends that all-terrain vehicle (ATV) drivers take a training course. ATVs can be hazardous to operate. For both ATVs and side-by-side vehicles (SSVs), the operator and passenger should wear a helmet, eye protection and other protective clothing. Respect the minimum age as required by law. For SSVs, fasten lateral net and seat belt at all times and passenger must be at least 12 years old and able to hold handgrips and plant feet while seated against the backrest. Never carry passengers on any ATV not specifically designated for such use. For ATVs, BRP recommends not to carry any passengers under the age of 12. Make sure that all laws, regulations, and BRP’s warnings / recommendations for ATV and SSV passengers are respected. Always remember that riding and alcohol/drugs don’t mix. Never engage in stunt driving. Avoid excessive speeds and be particularly careful on difficult terrain. Ride responsibly. BRP urges you to “TREAD LIGHTLY” on public and private lands. Preserve your future riding opportunities by showing respect for the environment, local laws and the rights of others when you ride. Always ride responsibly and safely. Never carry passengers on any ATV not specifically designated for such use. Highly skilled operators under controlled conditions appear in this brochure. Do not attempt these manoeuvres if they are beyond your skill level. Pictures taken outward, on private land. BRP reserves the right, at any time, to discontinue or change specifications, prices, designs, features, models or equipment without incurring obligation. Some models depicted herein may include optional equipment or not available in your country. Prices are based on Manufacturer Recommended Retail Prices. Please refer to your authorized Can-Am dealer for your own personalized quotation. Taxes not included. Depending on location, products are distributed by BRP European Distribution SA, BRP US Inc., BRP Australia Pty Ltd. or Bombardier Recreational Products Inc. ™, ® and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. CARLISLE is a trademark of Carlisle Companies. CHAMUDE and HIPORA are registered trademarks of Kolon Industries, Inc. CLARINO is a trademark of Kuraray Co. Ltd. COOLMAX is a registered trademark of INVISTA for durable fabrics. FOX is a trademark of FOX Racing Canada. GARMIN, MONTANA and NÜVI are registered trademarks of Garmin Ltd. iPod is a registered trademark of Apple Inc. KOLPIN, GUN BOOT and IMPACT are registered trademarks of Kolpin Powersports Inc. KYB is a registered trademark of Kayaba. HIGH SIERRA is a trademark of High Sierra Sport Company. LEXAN is a trademark of General Electric (GE). MicroSD is a registered trademark of SD Card Association. NEXT G-1 VISTA is a trademark of Next Camo, LLC. NGK is a registered trademark of NGK Spark Plugs, Ltd. PRIMALOFT ONE and PRIMALOFT CRESTA are registered trademarks of Albany International Corp. TEFLON, TEFLON HT and KEVLAR are trademarks of E.I. DuPont de Nemours & Co. TWINAIR is a trademark of Twin Air USA. UNI is a trademark of UNIFILTER Inc. VELCRO is a registered trademark of Velcro Industries. WARN is a trademark of Warn Industries Inc. YUASA is a registered trademark of YUASA Batteries Inc. All other trademarks are the property of their respective owners. © 2011 Bombardier Recreational Products Inc (BRP). All rights reserved.

RIDING GEAR6 RACE

10 ADVENTURE

14 RECREATIONAL

16 SPORTSWEAR

23 GLOVES

26 HELMETS

32 GOGGLES

34 KIDS&TEENS

34 BAGS

35 SIzINGCHART

&TECHNICALTERMINOLOGy

PARTS & ACCESSORIES36 OUTLANDERTMATV

50 RENEGADETMATV

60 DS450TMATV

65 DS250TMATV

66 APACHE360TRACKKIT

68 PLOWS

73 WINCHES

75 DECALS/MULTI-FIT

76 COMMANDERTMSSV

92 OFFICIALLICENSED

PRODUCTS

94 OILS&MAINTENANCE

3

adventuredistance RideRDestination riders look for ultimate comfort for driver and passenger. Weatherproof and rugged to enhance the ride to your favourite spot or sport.

/P15/P25

/P15 /P15 /P15 /P15 /P15

/P15

/P24 /P24

/P7

/P7 /P8

/P8

/P24

/P24

/P9 /P12

/P12

/P11

/P11 /P9

/P12/P11

/P11

/P13

/P12

/P12

/P13

/P11

/P25

/P8

raceactive RideRFor Race inspired riders who want to ride like pros. High performance, multi-functional gear featuring the bold team look that has podium- finish ride written all over it.

/P13

/P11

ca

mo

co

lle

cti

on

ba

yo

u c

oll

ec

tio

n

mu

d c

oll

ec

tio

n

men men menladies

ladiesmen

/P11 /P12

men ladies men ladies

men men men

X R

ac

e c

oll

ec

tio

nte

am

co

lle

cti

on

tea

m c

oll

ec

tio

n

win

teR

co

lle

cti

on

cR

os

s P

an

ts

/ in

su

late

d v

es

t

win

teR

co

lle

cti

on

recreationalwoRk & Play RideRApparel for work and play riding that delivers great value and covers all the basics.

554 Some models, tires and accessories depicted may not be available in your country. Please contact your brp dealer for more information.

key featuRes•Lightweight•Extremelybreathable•Toughanddurable

For Race inspired riders who want to ride like pros. High performance, multi-functional gear featuring the bold team look that has podium-finish ride written all over it.

race

key featuRes•Quick-dry•Moisture-wickingfabric•Extremelybreathable/Ultralight

men’s X Race JeRseyUltra light, quick-dry, antibacterial, moisture-wicking fabric. Large mesh panels at side seams and underarm for maximum breathability. Sonic-injection Can-Am logo on chest. Extended back for coverage while riding. Non-fading sublimated graphics. Content: 100% Polyester.

M,L,XL,2XL,3XL|286236|

men’s X Race PantsLightweight and extremely breathable pants for riders seeking peak performance, toughness and a competitive edge. Strong nylon outer shell. Overall water-repelling Teflon† treatment and light colors Teflon HT-treated for water and stain resistance. Double and triple stitched construction for enhanced durability. Inner knee debossed fullgrain leather for heat and abrasion resistance. Can-Am sublimated stretch panel on sides. Stretch panel at crotch, knee, back and lower back leg for ease of movement. Rubberized elastic waist to hold jersey in place. Ratchet-style waist closure for better adjustment. Straight hem at leg opening for more comfort in the boots. 3/4 length mesh lining. Content: 54% Nylon, 41% Polyester, 5% Genuine Leather.

30,32,34,36,38,40|286321|

Yellow (10)Black (90)

Yellow (10)Green (70)

6 76

Rid

inG

Ge

aR

• Ra

ce

Some models, tires and accessories depicted may not be available in your country. Please contact your brp dealer for more information.

ladies’ team JeRseySemi-fitted cut specifically designed for ladies. Stretch, quick-dry, antibacterial, moisture-wicking fabric for maximum comfort. Sleeves with jacquard pattern fabric for extra ventilation. V-neck. Small cuff. Non-fading sublimated graphics. Content: 94% Polyester, 6% Spandex. XS,S,M,L,XL,2XL286244|

ladies’ team RidinG PantsHigh-tech feminine design fit for female riders. Lightweight, durable and breathable waterproof nylon shell. Overall water-repelling Teflon treatment. Sealed critical seams. Side leg zipper ventilation. Left zippered hip pocket. Shaped knees with expandable contrasting gussets. Velcro side waist adjustment for custom fit. Double and triple stitched construction for added toughness. Reinforced binding hem with zipper to facilitate exit and entry. Water-resistant stretch panel at crotch and upper back. Jacket-to-pants connector. Can-Am sonic-injection logo on side left thigh. 3/4 length mesh lining. Content: Nylon. 3/4,5/6,7/8,9/10,11/12,13/14286234|

key featuRes•Stretch•Quick-dry•Moisture-wickingfabric

key featuRes•Breathableand

waterproof•zipperventilation•Highlyresistant

Black (90)

men’s team JeRseyEvaporative, non-fading coconut fiber weaved into fabric for faster-drying, antibacterial and odor-resistant performance. Extended back for coverage while riding. Non-fading sublimated graphics. Content: 75% Polyester, 25% Coconut Fiber.

S,M,L,XL,2XL,3XL|286237|

men’s team RidinG PantsLightweight, durable, breathable and waterproof nylon shell. Overall water-repelling Teflon treatment and light colors Teflon HT-treated for water and stain resistance. Critical seams sealed. Zip-off legs to convert into shorts. Zipper ventilation on thigh. 2 hip pockets. Velcro† side waist adjustment for custom fit. Double and triple stitched construction and binding hem for reinforcement. Water-resistant stretch panel at crotch and lower back for ease of movement. Jacket-to-pants connector. Rubberized elastic waist. Pre-shaped legs. 3/4 length mesh lining. Content: Nylon.

28,30,32,34,36,38,40,42,44|286228|

Brown (04)Yellow (10)Navy (89)

Brown (04)Yellow (10)Black (90)

key featuRes•Madeofantibacterialandodor-resistant

coconutfiberforfasterdrying

key featuRes•Breathableandwaterproof•zip-offlegstoconvertintoshorts•Highlyresistant

Blue (80)

Black (90)

8 9

Rid

inG

Ge

aR

• Ra

ce

Some models, tires and accessories depicted may not be available in your country. Please contact your brp dealer for more information. 9

men’s RidinG Jacket|S,M,L,XL,2XL,3XL|286230|

men’s team RidinG Pants|28,30,32,34,36,38,40,42,44|286228|ladies’ RidinG JacketHighly resistant, Teflon HP-treated nylon with RPM waterproof, breathable technology. 500 denier nylon at hem and double stitch construction throughout. Critical seams sealed. Long ventilation at side and underarm, plus additional ventilation at back for maximum airflow. 2 waist pockets and one interior zippered pocket. Double front flap and adjustable wrist, hem and collar. Gusset at back armhole for comfort while riding. Jacket-to-pants connector. Reflective Can-Am logo at center back. Can-Am sonic-injection logo at chest and reflective tribal print. Brushed polyester at inner collar, pocket and wrist for extra comfort. Shaped sleeves. Mesh lining. Content: Nylon.

ladies’ cRoss PantsLightweight durable pants, Teflon HP-treated nylon with RPM waterproof and breathable technology. 500 denier waterproof nylon at crotch and seat. Critical seams sealed. Side leg zipper ventilation. 2 zippered hip pockets with flaps. Jacket-to-pants connector. Binding hem at cuff for reinforcement with zipper to facilitate exit and entry. Pre-shaped legs. Can-Am transfer print at bottom leg. 3/4 length mesh lining. Content: Nylon.

men’s RidinG JacketHighly resistant, Teflon HP-treated nylon with RPM waterproof, breathable technology. Double-stitch construction throughout. Critical seams sealed. Ventilation at chest, underarms, side seams and at upper back for maximum breathability and good airflow. Two pockets at hips, plus one interior zippered pocket. Double front flap and adjustable wrists, hem and collar. Connector attaching jacket to Team Riding or Can-Am Cross pants to prevent jacket from riding up. Reflective piping at front and back. Can-Am sonic-injection logo at chest (X-team rubber patch on Yellow version). Shaped sleeves. Mesh lining. Content: Nylon.

men’s team RidinG PantsLightweight, durable, breathable and waterproof nylon shell. Critical seams sealed. Overall water-repelling Teflon treatment and light colors Teflon HT-treated for water and stain resistance. Zip-off legs to convert into shorts. Zipper ventilation on thigh. 2 hip pockets. Velcro side waist adjustment for custom fit. Double and triple stitched construction and binding hem for reinforcement. Water-resistant stretch panel at crotch and lower back for ease of movement. Jacket-to-pants connector. Rubberized elastic waist. Pre-shaped legs. 3/4 length mesh lining. Content: Nylon.

key featuRes•Breathableandwaterproof•zip-offlegstoconvertintoshorts•Highlyresistant

Destination riders look for ultimate comfort for driver and passenger. Weatherproof and rugged to enhance the ride to your favourite spot or sport.

adventure

Black (90)Yellow (10)

Black (90)Yellow (10)Brown (04)

ladies’ cRoss Pants5/6,7/8,9/10,11/12,13/14|286267|

BLACK (90)Black (90)

ladies’ RidinG JacketXS,S,M,L,XL,2XL|286201|

ladies

men

Brown (04)

key featuRes•Highlyresistant•Waterproofandbreathable•Maximumbreathabilitywithmultiplevents

10 11

Rid

inG

Ge

aR

• ad

ven

tuR

e


ladies’ insulated vestQuilted lightweight vest. Delivers unparalleled warmth. Suitable for everyday wear or under a jacket as extra layer to increase comfort in cold weather. 2 hand pockets. Soft micro-fleece inner collar. Adjustable bottom hem with drawstring and toggles. Reflective details. Insulation: Primaloft Cresta. Content: Nylon.

XS,S,M,L,XL,2XL,3XL286288|

ladies’ winteR RidinG JacketCold temperature performance jacket with feminine cut. RPM MAX waterproof, windproof and breathable technology. Overall water-repelling Teflon treatment and light colors Teflon HT-treated for water and stain resistance. Seams and logos sealed. Underarm venting. Zippered hand pockets. MP3, cell phone and additional inner pockets. Contrasting water-resistant zipper at chest pocket. Micro-fleece at collar and integrated inner wrist. Powder skirt. Front double flap. Adjustable collar. Reflective details. Shaped sleeves. Insulation: Primaloft Cresta. Content: Nylon.

XS,S,M,L,XL,2XL,3XL|286280|

key featuRes•Coldtemperatureperformance•RPMMAXwaterproof,windproof

andbreathabletechnology

key featuRes•Coldtemperatureperformance•RPMMAXwaterproof,windproof

andbreathabletechnology•Extrawarmthatseatandknees

basic balaclavaDesigned for warmth, dryness and comfort. Flatlocked seams prevent skin chafing. Content: 80% Nylon, 20% Spandex.

Onesize|447449|

Black (90)

Black (90)

mountain balaclavaStretchable, quick-dry fabric with brushed inner surface. Neoprene face guard for effective moisture exchange to promote breathing in extreme cold. Flatlocked seams prevent skin chafing. Good fit with XP-R helmets. Content: 80% Nylon, 15% Spandex, 5% Synthetic Rubber.

Onesize|445951

micRo-fleece balaclavaStretch, antibacterial warming fleece fabric with brushed inner surface. Flatlocked seams prevent skin chafing. Content: 92% Polyester, 8% Spandex.

Onesize|447565

Black (90)

technical balaclavaStrategically placed mesh for breathability. Micro-fleece for warmth. Windproof neck bib. Higher at back of neck for increased motion range. Flatlocked seams prevent skin chafing. Content: 92% Polyester, 8% Spandex.

Onesize|445950|

Black (90)

mask system balaclavaMask system helmet-matching balaclava. Seals around mouth and nose. Content: 60% Polyester, 30% Nylon, 10% Spandex.

S/M,L/XL|447566|

Black (90)

Brown (04)

Beige (02)

ladies’ winteR RidinG hiGhPantsTechnical, comfortable, versatile with feminine cut. RPM MAX waterproof, windproof and breathable technology. Sealed seams. 1,000 denier nylon-lined seat, knees and inner legs. Polar-fleece-lined seat and knees. Stretch-fleece bib. Drop seat design. 2-way full-length side zippers. Adjustable waist. Pockets at hips. Water-resistant zipper at right thigh pocket. Reflective details. Shaped knees. Insulation: Primaloft Cresta. Content: Nylon, Polyester.

XS,S,M,L,XL,2XL,3XL286281|

Black (90)

men’s winteR RidinG JacketNew yellow color. Robust textured fabric featuring RPM MAX waterproof, windproof and breathable technology. Overall water-repelling Teflon treatment and light colors Teflon HT-treated for water and stain resistance. All seams and logos sealed for added protection from water. Vents at underarm and back to enhance moisture evacuation during rigorous riding or mild weather. One chest pocket, two waist pockets and one easy-access Napoleon pocket. MP3, cell phone, cap inner pockets. Quadruple front flap uniquely designed for quad riding windproofness. Powder skirt to keep wind, cold and snow from entering. Reflective details. Adjustable fleece-lined chin-cushioned collar, wrists and sides. Shaped sleeves for ease of movement. Soft micro-fleece inner cuffs. Insulation: Primaloft Cresta. Content: Nylon.

S,M,MT,L,LT,XL,XLT,2XL|286253|

Yellow (10) Black (90)

Black (90)

S,M,L,XL,2XL,3XL|286287|

Brown (04)

Black (90)

30,32,34,36,38,40|286126|

Black (90)

men’s winteR RidinG hiGhPantsRPM MAX waterproof, windproof and breathable technology. Intelligent combination of materials specifically adapted to warmth, weatherproofing and comfort standards required for quad winter riding. Lightweight and versatile. Composite insulation for extra warmth at seat and knees. 600 denier nylon seat, knees and inner legs. All seams and logos sealed for added protection from water. Pads at knees for durability. Full-length side zip. Easy-access thigh pocket. Reflective ankle detail. Storm gaiter. Accordion knees and pre-shaped legs for ease of movement. Bib-style pants with high back and front to keep wind and snow out. Reinforced topstitch at back rise. Insulation: Primaloft Cresta. Content: Nylon.

S,M,MT,L,LT,XL,XLT,2XL|286254|

men’s cRoss PantsLightweight durable pants with RPM waterproof and breathable technology. 500 denier waterproof nylon at crotch and seat plus triple seams at crotch. Critical seams sealed. Side leg zipper ventilation. 2 practical cargo pockets with folded flaps. Cell phone pocket inside right cargo pocket. Jacket-to-pants connector. Perfectly-positioned flaps to protect all openings from infiltration. Binding hem at cuff with zipper to facilitate exit and entry and for reinforcement. Pre-shaped legs. Mesh lining. Belt loops. Content: Nylon.

men’s insulated vestQuilted lightweight vest. Delivers unparalleled warmth. Suitable for everyday wear or under a jacket as extra layer to increase comfort in cold weather. 2 hand pockets. Soft micro-fleece inner collar. Adjustable bottom hem with drawstring and toggles. Reflective details. Can be zipped inside Camo Jacket for extra insulation. Insulation: Primaloft Cresta. Content: Nylon.

key featuRes•Breathableanddurable•100%waterproof•zipperventilation

key featuRes•Lightweight•Warm•Canbewornunderajacketasextralayer

13

Rid

inG

Ge

aR

• ad

ven

tuR

e

Some models, tires and accessories depicted may not be available in your country. Please contact your brp dealer for more information.12

camo JacketQuiet, waterproof Next G-1 Vista Camo fabric. Matches ATV/SSV Camo pattern. All seams sealed. Underarm ventilation system for moisture evacuation. Detachable hood with molded visor and height adjustment drawcord. Collar with 3 different height levels for extra warmth and protection from wind. Watertight neoprene cuff with hook-and-loop tab. Zippered security pockets at chest and two expandable bellows pockets with handwarmer pockets. Internal waist drawcord for adjustment. Articulated elbow and longer back designed for riding position. Nonslip band at shoulders to keep gun strap in place. Relaxed fit allows layering. Inside zipper connecting with Can-Am Insulated Vest. Can-Am embroidered logo. Content: Polyester. M,L,XL,2XL,3XL|286282|

camo PantsQuiet, waterproof Next G-1 Vista Camo fabric. Matches ATV/SSV Camo pattern. All seams sealed. Double layer at knee for extra durability. Two cargo pockets easily accessible while seated. Full length side zipper. Thin foam at knee and seat for extra comfort. Zippered fly with ratchet closure at waist. Articulated knee and higher backwaist designed for riding position. Rubberized elastic waist. Brushed tricot lining. Belt loops. Relaxed fit to allow layering. Can-Am embroidered logo. Content: Polyester. M,L,XL,2XL,3XL|286283|

bayou JacketWaterproof DWR-treated nylon fabric. Critical seams sealed. Back ventilation for moisture evacuation. Bellows pocket at left chest. 2 Velcro waist pockets with flap to prevent water intrusion and one interior pocket. Big reflective stripes on shoulder for better visibility. Water deflecting double layer storm flaps. Adjustable wrists and hem. Jacket-in-pouch folds into back pocket for easy traveling. Cozy collar. Pre-shaped sleeves. Can-Am print at front and back. Content: Nylon.

S,M,L,XL,2XL|286264|

Jacket-in-pouch

Apparel for work and play riding that delivers great value and covers all the basics.

recreationalrecreational

key featuRes•WaterproofNextG-1VistaCamofabric•MatchesyourCamoCan-Amvehicle•Insidezipperconnectingwith

theCan-AmInsulatedVest

key featuRes•WaterproofNextG-1Vista†Camofabric•MatchesyourCamoCan-Amvehicle•Doublelayeratkneeforextradurability

Camo (37)

Camo (37)

Charcoal Grey (07)

Pants-in-pouch

Charcoal Grey (07)

bayou PantsWaterproof DWR-treated nylon fabric. Double layer and triple topstitch at seat for durability. Critical seams sealed. 2 practical cargo pockets with flap and gusset at front opening prevent water intrusion. Adjustable suspenders. Storm gaiters at bottom opening. Adjustable waist. Elastic at bottom leg to prevent pants from riding up. Self fabric gusset at crotch and upper seam for better comfort. Pants-in-pouch folds into inner pocket for easy traveling. Pre-shaped legs. Can-Am print at left leg. Content: Nylon.

S,M,L,XL,2XL|286265|

mud Jacket100% waterproof PVC. Electronically-welded seams. Underarm and rear vent panels. Two hand pockets. Elastic cuffs. Drawstring hood and hem. On Matte Black version, Can-Am logo at front left chest and upper back vent. On Clear version, Can-Am X-Team logo at front and back and Can-Am logo on sleeves. Content: Polyvinyle Chloride (PVC), Mesh Polyester.

S,M,L,XL,2XL|286127|

Clear (00)Matte Black (93)

mud bootsBlack polyurethane boot with colored sole. One-piece construction for 100% waterproofness. Lightweight, comfortable soft wool liner. Aggressive treads. Designed for style and maximum grip on any surface. Excellent resistance to oils, grease and gasoline. Can-Am branded. Content: Polyurethane.

8,9,10,11,12,13|444157|

Black (90)

mud PantsOversized pants made of 100% waterproof PVC. Electronically-welded seams. Strategically placed ventilation. Side openings at bottom leg. On Matte Black version, Can-Am logo at bottom legs. On Clear version, Can-Am logos on the sides. Content: Polyvinyle Chloride (PVC).

S,M,L,XL,2XL|286128|

Clear (00)Matte Black (93)

14 15

Rid

inG

Ge

aR

• Rec

Re

ation

al


sportswear

Back

X Race PoloQuick-dry, antibacterial, moisture-wicking fabric. 3-button front placket. Sublimated non-fading Can-Am logos. Side slits. Rib collar. Content: 100% Polyester.

S,M,L,XL,2XL,3XL|286277|

Black (90)

ZiPPed hoodyFull-zip hooded sweatshirt. Ribbed waistband and cuffs. Embossed Can-Am logos on contrasted stripe. Content: 80% Cotton, 20% Polyester.

S,M,L,XL,2XL|286209|

Black (90)Warm Grey (15)

technician shiRtCotton twill shirt. Chest pockets. X-Team rubber patch at front. Large X-Team embroidery at back. Snap placket. Embroidered sponsor logos on sleeves. Content: 100% Cotton.

S,M,L,XL,2XL,3XL|286205|

Black (90)Navy (89)

17

Rid

inG

Ge

aR

• sP

oR

tsw

ea

R


Beige (02)

can-am beltLeather belt with vintage inspired metal Can-Am buckle.

M,L,XL|286153|

X-team teeCan-Am X-Team graffiti print at front. Content: 100% Cotton.

M,L,XL,2XL|286191|

Black (90)Green (70)

action teePrint at front. Content: 100% Cotton.

M,L,XL,2XL|286272|

siGnatuRe teeCan-Am print at front. Content: 100% Cotton.

S,M,L,XL,2XL,3XL|286320|

ReneGade teeDischarged print at front with Can-Am logo on right sleeve. Content: 100% Cotton.

M,L,XL,2XL|286189|

Black (90)Navy (89)Green (70)

Black (90)White (01) Khaki (05)

Blue (80)

Genuine teePrint at front. Content: 100% Cotton.

S,M,L,XL,2XL,3XL|286273|

outlandeR teeOutlander print at front. Content: 100% Cotton.

M,L,XL,2XL,3XL|286291|

tRack teeCan-Am print at front. Contrasting collar and stitches. Content: 100% Cotton.

S,M,L,XL,2XL,3XL|286293|

Black (90) Black (90)White (01) Khaki (05) Black (90)Brown (04)

Black (90)

Black (90)Ice (38)

authentic teeCan-Am vintage crackled logo on chest. Garment enzyme washed for soft and vintage handfeel. Content: 100% Cotton.

M,L,XL,2XL|286190|

coolmaX† technical socksBelow-knee length with varied thicknesses for comfort. Ribbed top. Moisture-wicking COOLMAX at foot to keep riders cool and dry. Spandex and nylon for comfort and durability. Elasticized ankle and foot arch for secure comfort and fit. Content: 40% COOLMAX, 25% Cotton, 27% Acrylic, 5% Nylon, 3% Lycra.

S/M,L/XL|286154|

Black (90)

18 Some models, tyres, and accessories depicted may not be available in your country. Please contact your brp dealer for more information.

Rid

inG

Ge

aR

• sP

oR

tsw

ea

R

19

imaGe à veniR

authentic caPAdjustable canvas hat. Vintage logo embroidered at front. Metal adjuster with BRP logo. Content: 100% Cotton.

Onesize|286211

X Race caPFitted stretch twill cap with prints. X-Team rubber patch at front. Embroidery of critter under peak. Content: 98% Cotton, 2% Spandex.

S/M,L/XL|286305

Genuine caPFitted cap made from lightweight fabric. Plaid details weaved in back panel fabric. Can-Am embroidery at front. Prints on sides. Content: 60% Polyester, 38% Nylon, 2% Spandex.

S/M,L/XL|286274

Yellow (10)

Red (30) Green (70)

classic caPUltra comfortable, stretch, lightweight fabric. 3D Can-Am embroidery at front. Metal adjuster with BRP logo. Content: 72% Polyester, 23% Rayon, 5% Spandex.

Onesize|286210|

Charcoal Grey (07) Black (90)

Black (90)

Sand (03)

Blue (80)

Fire Red (06)

Grey (09) Black (90)

outlandeR caPOutlander rubber logo at front. Mud track embossed at front left side. Metal adjuster with BRP logo. Content: 100% Cotton.

Onesize|286292

Charcoal Grey (07)

camo caPMatches ATV/SSV Camo pattern. Can-Am logo embroidery at front. Metal adjuster with BRP logo. Content: 100% Polyester.

Onesize|286290|

Camo (37)

Beige (02)

Brown (04)

team caP3D Can-Am embroidery with print. Rubber details on sides and peak. Velcro closure at back. Content: 97% Polyester, 3% Spandex. Onesize|286270

summeR beanieLightweight, texturized knitted beanie with “X” integrated logo and woven Can-Am label appliqué. Content: 95% Cotton, 5% Spandex.

Onesize|286156

Black (90)

winteR beanieMicro-fleece lining. Embroidered knitted Can-Am logo at front. Content: 50% Acrylic, 50% Wool.Onesize|286289

Charcoal Grey (07) Yellow (10)

Sand (03) Black (90)

tRack caPAdjustable canvas cap. 3D Can-Am logo at front. Contrasting peak with embroideries. Metal adjuster with BRP logo. Content: 100% Cotton.

Onesize|286275|

Brown (04)

Yellow (10) Navy (89)


Rid

inG

Ge

aR

• sP

oR

tsw

ea

R

21

White (01)

ladies’ staR teeFitted t-shirt. Feminine round neck with small gathering details at front. Print with sparkle details. Can-Am logo next to collar. Content: 95% Cotton, 5% Spandex.

S,M,L,XL|286276|

ladies’ staR caPFeminine-style cap made from ripstop lightweight fabric. Print at front. Can-Am embroidery on left side. Stretchable thanks to back elastic. Content: 100% Cotton.

S/M,L/XL|286271|

Green (70) Black (90)

ladies’ authentic teeNew Lilac color. Fitted feminine t-shirt. V-neck with vintage crackled print at front. Content: 95% Cotton, 5% Spandex.

S,M,L,XL|286263|

Lilac (25) Black (90)

White (01) Black (90)

ladies’ micRo-fleece hoodieAsymmetrical neck opening on a hooded feminine-fit micro-fleece. Two pockets. Contrast cord, hood lining, pocket flaps and logo. Can-Am logo appliqué on left sleeve. Content: 100% Polyester.

S,M,L,XL,2XL|286200|

Charcoal Grey (07)

ladies’ X-team teeNew Purple color. Fitted feminine t-shirt. X-Team logo at chest on White version. Can-Am logo at chest on Purple version. Content: 95% Cotton, 5% Spandex.

S,M,L,XL|286262|

Purple (40)

Purple (40)

Gloves

22

Rid

inG

Ge

aR

• Glo

ves

23Some models, tires and accessories depicted may not be available in your country. Please contact your brp dealer for more information. 23

men’s X Race GlovesDesigned for protection and flexibility. Air mesh panels for ventilation and mobility. Perforated palm for ventilation. Double Clarino† layer at palm and thumb for extra durability and comfort. Knuckle gussets for better mobility. Pre-curved design. Silicone fingertip for better grip. Direct-injection details on back hand. Hook-and-loop wrist closure system to keep glove in place. Content: Air Mesh, Spandex, Clarino. S,M,L,XL,2XL|286195|

men’s team GlovesSpandex construction for flexibility. Chamude palm. Pre-curved design. Direct-injection logo and print on back hand. Hook-and-loop wrist closure system. Content: Spandex, Chamude.

S,M,L,XL,2XL,3XL|286229|

ladies’ X Race GlovesAir mesh panel for maximum ventilation and mobility. Double Clarino layer at palm and thumb for extra durability and comfort. Pre-curved design. Silicone fingertips for added grip and control. Direct-injection details on back hand. Hook-and-loop wrist closure system. Content: Air Mesh, Spandex, Clarino.

S,M,L,XL,2XL|286322|

men’s tRail GlovesNew Brown color. Flexible. Leather reinforcements at fingers, palm and back hand for extra durability. Hipora insert at back hand to add water resistance without compromising grip at palm. Pre-curved design. Clarino at palm and thumb. Inverted seams at fingers for better comfort. Content: Nylon, Leather, Polyester, Spandex.

S,M,L,XL,2XL|286268|

men’s camo Gloves4 oz insulation for cold weather. Quick and easy access to trigger at forefinger*. Additional leather layer at palm for more durability and better grip. Waterproof, breathable Hipora insert. Velcro wrist adjustment. Pre-shaped fingers. Large gauntlet for wearing over jacket. Insulation: Polyester. Content: Polyester, Leather. *Glove not completely waterproof at forefinger.

M,L,XL,2XL,3XL|286284|

men’s winteR tRail GlovesComfortable and flexible gloves with. 4 oz insulation for cold weather. Leather reinforcements at fingers, palm and back hand for extra durability and grip at palm. Waterproof, breathable Hipora† insert. Pre-curved design. Clarino at palm and thumb. Inverted seams at fingers for better comfort. Insulation: Polyester. Content: Nylon, Leather, Polyester, Spandex.

S,M,L,XL,2XL,3XL|286279|

Black (90)Black (90)

Black (90)Brown (04) Brown (04)

Camo (37)

men’s winteR RidinG Gloves & mittsExtra warm nylon gloves & mitts with leather palm. Adjustable insulation with removable antibacterial, stay-dry moisture management lining. Visor-wiping cotton terry left thumb for clearing water, snow or fog. Large gauntlet with adjustable wrist. Reflective details. Insulation: Primaloft One. Content: Nylon, Leather.

GlovesS,M,L,XL,2XL|286204|Mitts S,M,L,XL,2XL|286257|

Black (90)

yellow (10) black (90)

Black (90)

Navy (89)

Brown (04)

Blue (80) Black (90)

white (01)


Rid

inG

Ge

aR

• Glo

ves

25

helmets

Xc-3 holeshot helmetXS,S,M,L,XL,2XL|447514|SnellM2005andD.O.TcertifiedXS,S,M,L,XL,2XL|447576|ECCertified

Xc-3 helmetXS,S,M,L,XL,2XL|447604|SnellM2005andD.O.TcertifiedXS,S,M,L,XL,2XL|447605|ECCertified

XP-2 dune helmetMoisture-wicking and breathable chin strap, liner and cheek pads. High-tech, lightweight and tough Fiberglass/Kevlar matrix shell. Fully-adjustable, aero-tuned visor reduces lift at high speeds. Ventilation system. Easily removable and washable liner and cheek pads. Provides maximum visibility, fits all goggles. Strap grip keeps goggle strap in place. Snell M2005 and D.O.T. certified. Shell: Lightweight Fiberglass/Kevlar†.XS,S,M,L,XL,2XL|447578|SnellM2005andD.O.TcertifiedXS,S,M,L,XL,2XL|447579|ECCertified

key featuRes / Xc-3 helmet•LightweightandtoughAdvancedPolycarbonateCompositeshell•Getthebestfitofallwiththeairpumpadjustablecheekpads

activatedbyfingerpressure

sand (03)

yellow (10) black (90)

blue (80)

Red (30)

Xc-3Lightweight and tough Advanced Polycarbonate Composite shell. Equipped with air pump adjustable cheek pads activated by finger pressure for better fit. New chinbar, rubber nose roost shield for deflecting more debris without reducing goggle/eye port area. Fully-adjustable, aero-tuned visor reduces lift at high speeds. Ventilation system. Moisture-wicking chin strap, liner and cheek pads. Easily removable and washable custom liner and cheek pads. Provides maximum visibility and fits all goggles. Strap grip to hold goggle strap in place. Snell M2005 and D.O.T. certified. Shell: Polycarbonate Composite.

aiR PumP adJustable cheek Pads

26

Rid

inG

Ge

aR

• helm

ets


XP-R caRbon liGht helmetXS,S,M,L,XL|447412|

st-1 hybRid helmetMultiple functionalities when fitted with optional one-of-a-kind jaws. Outer shell ventilation features include two ventilation tab kits with anti-fog spray kit, triple configuration flexibility (jet, vented, and full face), continuous top ventilation and exhaust. Double D ring closure. Anti-scratch, retractable sun visor. Moisture-wicking and breathable removable liner and cheek pads. D.O.T. approved. Shell: Polycarbonate Composite.

XS,S,S/M,M/L,L,XL|447427|SnellM2005andD.O.TcertifiedXS,S,S/M,M/L,L,XL|447467|ECcertified

st-1 hybRid full face JawTransforms the ST-1 Hybrid Helmet into a standard full face helmet for extra wind protection.

Onesize|447428|

st-1 hybRid vented JawTransforms the ST-1 Hybrid Helmet into a jet ventilated full face helmet for enhanced protection with ventilation comfort.

Onesize|447429|

st-1 hybRid sinGle Pane visoR - lonGOptically-correct shield with hardcoated anti-scratch technology.

Onesize|447430|Clear(00)

st-1 hybRid sinGle Pane visoR - shoRtOptically-correct shield with hardcoated anti-scratch technology.


st-3 helmet tinted visoRTinted visor with anti-scratch treatment.

Onesize|447598|Smoke60%(21)

25% liGhter than all otheR helmets in its cateGoRy.

sweat absoRbent PadsPack of 10.

Onesize|447435|White(01)

moRPho kit cheek PadsExtra cheek pads, left and right included.

M,L,XL,2XL,3XL|447436Clear(00)|

Bronze (92)

Black (90)

RePlacement bReath mask(Not illustrated)

Onesize|447475Black(90)|

White (01) Silver (08) Blue (80) Black (90)

White (01)

White (01)

Silver (08)

Silver (08)

Blue (80)

Blue (80)

Black (90)

Black (90)

XP-ROur best-of-the-best M.D.C.F. Multi Directional Carbon Fiber lightweight helmet with carbon and aramid fiber reinforced shell. Weight: +/- 1275 g for “L” size. EPS foam upper insert between inner fabric and outer shell for optimized user protection. Integrated rear fin for added stability and aerodynamic performance. Tool-less multi adjustable wide angle front peak with anti-reflecting sticker just below to deflect glare. Large flexible nose protector for better protection. Double D racing buckle, anti-slip goggle strap, pocket for sweat absorbent front pad. Removable and washable cheek and head pads. Morpho System Plus - Ergonomic 3D cheek pads available in your size. Surround comfort sanitized treated interior with COOLMAX moisture wicking action. F.A.S. (Full Air System) with 10 ventilation points and double rear extractor. Aluminum screws, protective coated parts. Ergonomic helmet bag. D.O.T. and EC certified 22.05 certified. Shell: 100% Carbon Fiber Composite.

*This helmet is not EC certified.28

Rid

inG

Ge

aR

• helm

ets

29Some models, tires and accessories depicted may not be available in your country. Please contact your brp dealer for more information.

advanced tec e-chRome GoGGlesPatented e-chrome dual lens system instantly tints dark when activated for optimum visibility in varied light conditions. Large, flexible, assembled urethane frame with integrated vents for strength, flexibility and comfort-flow ventilation. Oversized, hypoallergenic triple-density face foam for comfort, shock/sweat absorption and reduced skin chafing. Anti-fog, scratch-resistant dual lens for long-lasting clear vision in the toughest conditions. Premium silicone-backed strap system for long-lasting slip-free performance. Hinged strap system for optimum fit on any facial geometry. Include clip-on nose guard shield for increased protection. Advanced Tec branded. Onesize|447585|

adventuRe GoGGle mask(Not illustrated) Clips on goggles for added protection from the elements.

Onesize|447574|Black(90)|

adventuRe GoGGle miRRoRed RePlacement lensScratch-resistant mirrored MAX Flow lens for good visibility in varied light conditions.

Onesize|447602|

adventuRe GoGGle RePlacement lensScratch-resistant clear MAX Flow lens for long-lasting clear vision in the toughest conditions.

Onesize|447603|

Race GoGGle Roll-off systemEasy-use string-pull system removes film of dust, mud or rain as you ride to produce clean and clear view.

Onesize|447611|

Roll-off system RePlacement caRtRidGes kitRoll-off System replacement cartridges.

Onesize|447612|

Quick-stRaP Race GoGGlesFast and clever quick-strap system delivers easy attachment convenience and fits any Cross type helmet. Large urethane frame for strength, flexibility and style. Oversized, hypoallergenic dual-density face foam for comfort, shock absorption and reduced skin chafing. Scratch-resistant clear MAX Flow lens for long-lasting clear vision in the toughest conditions. Premium silicone-backed strap system for long-lasting slip-free performance. Hinged strap system for better fit on any facial geometry. Include clip-on nose guard shield for increased protection in extreme riding conditions.

Onesize|447572|

Race GoGGlesLarge urethane frame for strength, flexibility and style. Oversized, hypoallergenic dual-density face foam for comfort, shock absorption and reduced skin chafing. Scratch-resistant amber clear lens for long-lasting clear vision in the toughest conditions. Premium silicone-backed strap system for long-lasting slip-free performance. Hinged strap system for better fit on any facial geometry. Can-Am branded.

Onesize|447570|

Race GoGGle mask(Not illustrated) Clips on goggles for added protection from the elements.

Onesize|447571|Black(90)

Race GoGGle RePlacement lensScratch-resistant clear MAX Flow lens for long-lasting clear vision in the toughest conditions.

Onesize|447601|

tRail GoGGlesLarge urethane frame for strength, flexibility and style. Hypoallergenic face foam for long-lasting comfort and performance. Scratch-resistant clear lens for good visibility in all conditions. Silicone-backed strap system for slip-free performance. Can-Am branded.

Onesize|447567|adventuRe GoGGlesLarge, flexible, assembled urethane frame with integrated vents for strength, flexibility and comfort-flow ventilation. Oversized, hypoallergenic triple-density face foam for comfort, shock/sweat absorption and reduced skin chafing. Includes 2 scratch-resistant lens: 1 mirrored MAX Flow lens for varied light conditions and 1 clear MAX Flow lens for long-lasting clear vision in the toughest conditions. Premium silicone-backed strap system for long-lasting slip-free performance. Hinged strap for better fit on any facial geometry. Include clip-on nose guard shield for increased protection. Can-Am branded.

Onesize|447573|

tRail GoGGle RePlacement lens(Not illustrated) Scratch and fog resistant clear lens.


GoGGles

White (01)

Silver (08)

silver (08)

key featuRes / advance tec e-chRome GoGGles•Patentede-chromeduallenssysteminstantlytints

darkwhenactivatedformaximumvisibilityinvariedlightconditions

•Largeandflexible•Integratedvents,hypoallergictriple-densityfacefoam•Anti-fog,scratch-resistant

Clear (00)Mirror Silver (22)

Clear (00) Clear (00) Clear (00)

White (01)

Yellow (10)

Black (90)

Yellow (10)

Black (90)

Yellow (10)

Black (90)


Rid

inG

Ge

aR

• Go

GG

les

31

full face helmet caseWater-resistant construction. Self-healing nylon zippers. Quick-access spare faceshield storage. External legs for vertical storage. Interior scratch-proof surface. Ergonomic soft-touch rubber carrying handle.

Onesize|445856

PRo GeaR baGDesigned and built for consummate riding. Protective helmet compartment, watertight drained boot compartment, dry-mat and cavernous center compartment, tool compartment. Inline wheels and pull-handle for maximum portability.

Onesize|286214|

cRoss helmet caseWater-resistant construction. Self-healing nylon zippers. Quick-access spare faceshield storage. External legs for vertical storage. Interior scratch-proof surface. Ergonomic soft-touch rubber carrying handle.

Onesize|445857

weekendeR duffle baGDesigned for day trips or extended outings.

Onesize|286213|

Black (90)

Black (90)

Black (90)

Black (90)

Black (90)

teen Race JeRseyMade from quick-dry, antibacterial, moisture-wicking fabric. Extended back for riding position. Sublimated print. Content: 100% Polyester.

7/8,10/12,14/16|286202|

kids’ can-am teeCartoon print at front. Content: 100% Cotton.

2,3/4,5/6|286260|

Blue (80)

teen team RidinG GlovesSpandex construction for great flexibility. Chamude palm. Pre-curved design. Direct-injection patches on back hand. Hook-and-loop wrist closure system. Content: Spandex, Chamude.

6/8,10/12,14/16|286203

Black (90)

volcano JunioR cRoss helmet*

High-tech, lightweight and tough. Fully-adjustable, aero-tuned peak. Ventilation system. Moisture-wicking and breathable chin strap, liner and cheek pads. Easily removable and washable liner and cheek pads. Provides maximum visibility. Fits all goggles. Strap grip keeps goggle strap in place. D.O.T. certified. Shell: Plastic.

S,M,L|447512|

Black with graphics (94)

JunioR tRail GoGGlesLarge urethane frame for strength, flexibility and style. Hypoallergenic face foam for long-lasting comfort and performance. Scratch-resistant clear lens for good visibility in all conditions. Silicone-backed strap system for slip-free performance. Can-Am branded.

Onesize|447568|

we KeeP you DRytechnical terminology

we KeeP you wARM

cResta by PRimaloft Primaloft Cresta offers warmth without weight and extra bulk. It is designed to keep you warm and comfortable throughout the day.

PRimaloft one Warmer wet or dry than any other synthetic insulation. The ultimate down-like microfiber insulation. Quick drying, soft, and breathable. Primaloft One is lightweight, compressible and thermally efficient.

Respiractive Performance Matrix or RPM coating exclusive to BRP Riding Gear. Delivers extremely high performance and durability for perfect climate control under even the most extreme conditions. Trademark waterproofness, windproofness and breathability required of BRP Riding Gear shell fabric developed for intensive use and demanding riders.

Same great RPM coating PLUS total seam and logo sealing. Also, added direct venting in strategic jacket areas for more eff icient moisture management during intense activity.

teflon†

Teflon provides an invisible barrier around fabric fibers to repel water and stains. In addition to retaining its water shedding properties longer than standard Teflon, Teflon HT and HP are also even more resistant to soiling and staining without altering the fabric’s color, appearance, structure, texture and breathability. Teflon HT, good up to 20 washes and Teflon HP up to 30 washes compared to manufactured coatings washable only 1 to 5 times.

hiPoRa†

Windproof, breathable and waterproof membrane that features unique polyurethane coating technology and delivers excellent moisture management.

dwR†

DWR stands for Durable Water Repellency. This treatment helps prevent the outer fabric surface from absorbing water, keeping the outerwear both light and comfortable.

seam sealinGSeams and embroidery can act as tiny entry points through which wind and water can infiltrate. That’s why jackets and pants with RPM are critical seam and logo sealed. And Riding Gear with RPM Max are 100% seam and logo sealed for an even more comprehensive barrier from all the elements. The proprietary tape is also waterproof and breathable to fully seal the deal for complete performance.

men’s/JacketsXs s m mt l lt Xl Xlt 2Xl 3Xl

CHEST (CM) 84-89 91-97 99-104 99-104 107-112 107-112 117-122 117-122 127-132 137-142WAIST (CM) 71-76 76-81 84-89 84-89 91-99 91-99 104-109 104-109 114-122 127-132HIPS (CM) 81-86 89-94 97-102 97-102 104-109 104-109 114-119 114-119 124-130 135-140ARM LENGTH (CM) 78,5 83,5 83,5 87,5 86,5 90,5 86,5 90,5 88,5 88,5

men’s/Pants28 30 32 34 36 38 40 42 44

WAIST (CM) 71-76 76-81 81-86 86-91 91-97 97-102 102-107 107-112 112-117HIPS (SEAT) (CM) 84-89 89-94 94-99 99-104 104-107 107-112 112-117 117-122 122-127INSEAM (CM) 81 81 81 81 81 81 84 84 84

ladies’/Pants5/6 7/8 9/10 11/12 13/14

WAIST (CM) 66-71 71-76 76-81 81-86 86-91HIPS (SEAT) (CM) 91-97 97-102 102-107 107-112 112-117INSEAM (CM) 74 76 76 76 76

ladies’/JacketsXs s m l Xl 2Xl 3Xl

CHEST (CM) 84-85 88-90 93-97 100-104 109-116 119-126 130-135WAIST (CM) 62-65 67-70 72-76 80-84 89-94 99-104 109-114HIPS (CM) 88-90 93-95 98-102 105-109 114-119 124-130 135-140ARM LENGTH (CM) 73,5 76,5 78,5 81,5 81,5 81,5 81

ladies’ Gloves (MEASUREPALMWIDTH)s m l Xl

CM 6,8 7,5 8,3 9

teen Gloves (MEASUREPALMWIDTH)6-8 10-12 14-16

CM 8 8,5 9

helmetsXs s m l Xl 2Xl 3Xl

HELMET SIZE 6 1/2 - 6 3/4 6 7/8 - 7 7 1/8 - 7 1/4 7 3/8 - 7 1/2 7 5/8 - 7 3/4 7 7/8 - 8 8 1/8 - 8 1/4

HEAD (CM) 53 - 54 55 - 56 57 - 58 59 - 60 61 - 62 63 - 64 65 - 66

can-am JunioR cRoss helmets m l

HEAD (CM) 49 - 50 51 - 52 53 - 54

sockss/m l/Xl6 - 9 10 - 13

men’s Gloves(MEASUREPALMWIDTH)s m l Xl 2Xl

CM 7,5 8,5 9,5 10,5 11,5

kids/teen 2 3/4 5/6 7/8 10/12 14/16

CHEST (CM) 53 56-58 61-64 66-69 73-76 79-84WAIST (CM) 51 52-53 55-56 57-58 61-64 66-69HIP (SEAT) (CM) 53 56-58 61-64 66-69 72-76 79-84ARM LENGTH (CM) 39 43-47 51-55 58-62 72-76 79-84INSEAM (CM) 34 39-44 50-53 57-62 66-71 74-79

how to mesuReForbestresults,havesomeoneelsetakemeasurements.Measurebodyinunderwear.Tapemustbesnugbutnottight.Ifmeasurementsfallbetweentwosizes,orderthelargersize.

siZinG chaRt

chest/bustMeasure under your arms, around the fullest part of your chest.

waist Measure around your natural waistline, keeping one finger between the tape and body.

GlovesMeasure palm width.

inseamWithout shoes, from crotch to the floor.

aRm lenGth Hand on hip, from center back neck bone, along shoulder point around elbow to bottom of wrist bone.

headAround your head, from the center of the forehead, above the ears and over the natural bump at the back of the head.

kids & teens

BaGs

what code represents your size?1. Find your size.2. The corresponding code is THE CODE you use

to complete the part number on your order. Example: 440 227__90 Size: M = code 06 Therefore 440 227 06 90

size = code size = code size = codeOne Size 00 M/L 91 10 30

XS 02 L/XL 73 11 31S 04 2 21 12 32M 06 3/4 79 13 33MT 07 5/6 52 28 36L 09 6/8 48 30 37LT 10 7/8 54 32 38XL 12 9/10 55 34 39XLT 13 10-12 49 36 402XL 14 11/12 56 38 413XL 16 13/14 80 40 424XL 18 14/16 50 42 435XL 88 8 28 44 44S/M 72 9 29

*This helmet is not EC certified.32 33Some models, tires and accessories depicted may not be available in your country. Please contact your brp dealer for more information.

Rid

inG

Ge

aR

• kid

s/teen

s &

siZin

G c

ha

Rt

LINQ premIum 124L TruNK BOX wITh rear LIghTThis extra large innovative Trunk Box carries up to three helmets (124L) and has a key locking latch. It is made of heavy-duty polypropylene and has weather-resistant lid gaskets to seal out dust and moisture. The Trunk box is offered with the new LinQ system meaning it can be installed or removed in a snap, with no tools. The colored panels can also be changed to match the body color of your vehicle.

uNDerBeLLY prOTeCTIONAluminum plates made with high strength 5052 H32 aluminum and plastic deflector to protect your frame from the unexpected - a must-have for rugged terrains.

muDguarDSIt’s a must to ride in the mud. Made out of injected plastic parts that perfectly fit your Outlander fenders, they offer more protection from dirt and debris.

LINQ FrONT & rear raCK eXTeNSIONSThese strong, durable Extension Racks install easily on the MY12 Outlander thanks to the new LinQ system, requiring no tools. It helps keep your cargo more securely in place.

DeLuXe FaIrINgThe new Deluxe Fairing provides not only wind protection, but a series of inovative features:- Quick tooless removal once the base brackets

are mounted on the handlebar- 2 Cup holders- Optional GPS mounting kit- Add-on windshield can be replaced- Optional mirrors- Optional auxiliary windshield lighting

OUTLANDER ATV

38 Underbelly Protection39 Bumpers40 Trunk Boxes42 Rack Extensions & Bags44 Windshields45 Electrical Accessories 46 Mud Accessories & Shocks48 Hitches49 Covers & Can-Am

Accessories by Kolpin56 Shock Protectors,

Filters & Grips57 Handlebars & Mirrors58 Rims

FrONT & rear BumperSThe front and rear bumpers will provide additional protection against the elements. Tough and durable, they can be added on the base vehicle to give your Outlander the look of an XT model.

LINQTm SYSTemThe LinQ system is a sturdy full-lock mounting system, featured on a complete line of accessories. It provides an easier, faster and secure way to attach and remove accessories on your Outlander. You can now instantly transform your vehicle to suit the need of the moment. Easy – no tools require. (715000945 See p.40).

auXILIarY wINDShIeLD LIghTINgThe new Deluxe Fairing structure is designed to receive these premium LED spots. They will not only increase lighting output but it will give directional lighting. (715001214 See p.44).

LINQTm DeLuXe mODuLar BagSThese LinQ system durable modular bags can be installed and removed in a snap with no tools. Versatile, spacious and good looking, you can carry all you need, in all conditions. Made with a molded rubber bottom part, the bags are 100% watertight and scratch-resistant. (715001380 & 715000933 See p.43).


par

TS &

aC

CeS

SO

rIeS

• Ou

TLaN

Der

aTV

3534

LOwer Bumper eXTeNSIONAdds protection to lower front plastic fascia. Easy to install. No drilling required. Removable for track kit installation. Must be installed with XT Front Bumper Kit (715000670).

2012 Outlander maX, 500 & 650 | 715000635 | Black |

eXTreme FrONT BumperUltra sturdy for extra vehicle front protection. Fits with Apache 360 Track System when removing the side panels. Not avalaible on EC homologated vehicles.

Outlander 2012 with 800 or 1 000 engine | 715001286 | Black |

FOOTpeg KITProvides maximum integrated grip and more stability during vigorous riding. Kick-up end generates added grip during hard cornering. Made of aluminum. Sold in pairs.

Outlander 2011 and prior and 2012 maX, 500, 650 | 715000916 | Outlander 2012 with 800 or 1 000 engine | 715001131 |

FOOTpeg eXTeNSIONS*

Made of aluminum. Provide grip in all weather and riding conditions. Use in conjunction with footpeg kit (715000916). Sold in pairs.

Outlander (except 2012 with 800 or 1 000 engine) | 715000996 |

XT rear Bumper KIT

Provides additional protection against the elements. Tough and durable, can be added on base Outlander model to convert vehicle into XT model. Large tube construction with textured black finish. Standard on XT model.

Outlander 2009 800r, 2010-2011 & 2012 maX, 500 & 650 | 715000671 | Black | Outlander 2006-2009 (except 800r) | 703500550 | Black | Outlander 2004-2005 | 703500349 | Black | Outlander 2012 with 800 or 1 000 engine | 715000948 | Black |

ALUMINUM PLATES MADE WITH HIGH STRENGTH 5052 H32 ALUMINUM AND PLASTIC DEFLECTOR TO PROTECT YOUR FRAME

FROM THE UNEXPECTED - A MUST-HAVE FOR RUGGED TERRAINS.

Shown picture repreSentS the outlander new platform (with 800 or 1 000 engine). for other outlander modelS, picture may differ.

XT FrONT Bumper KIT

Provides additional protection against the elements. Tough and durable, can be added on base Outlander model to convert vehicle into XT model. Large tube construction with textured black finish. Standard on XT model.

Outlander 2009 800r, 2010-2011 & 2012 maX, 500 & 650 715000670 | Outlander 2006-2009 (except 800r) | 703500551 | Outlander 2004-2005 | 703500348 | Black | Outlander 2012 with 800 or 1 000 engine | 715000947 |

a-arm prOTeCTOrSAdd more protection to the CV joint and rubber boots. 1/8” (3 mm) thick lightweight and durable design. Drain hole to release water, mud and debris. Easy to install. Replaces stock plastic protectors. Sold in pairs.

embossed Can-am logo: Outlander 2012 with 800 or 1 000 engine | 715000911 | engraved Outlander name: Outlander 2006-2011 (except 400), 2012 maX, 500, 650 703500524 |

FrONT aLumINum SKID pLaTeProtection for the front portion of the frame. 3/16” (4.5 mm) thick and die-formed for strength and durability. Use in conjunction with the central chassis skid plate for full frame protection.

Outlander 2012 with 800 or 1 000 engine715000926 | Stamped aluminum: Outlander 2006-2011 (except 400), 2012 maX, 500, 650 | 715000548 |

CeNTraL ChaSSIS SKID pLaTe3/16” (4.5 mm) thick and die-formed. Engraved Can-Am logo.

Outlander 2012 with 800 or 1 000 engine715000923 | Stamped 1/8’’ (3 mm) aluminum construction. Recessed bolt holes. Cannot be installed with Plow Mounting Kit.

Outlander 500, 650, 800 and maX (except 2012 one up with 800 or 1 000 engine)715000636 |

FOOTweLL prOTeCTOr pLaTeSBump up the impact protection to the footwells. 1/8” (3 mm) thick lightweight and durable design. Use in conjunction with the central chassis skid plate. Sold in pairs.

Outlander 2012 with 800 or 1 000 engine715000922 | Outlander 2006-2011 (except 400) & 2012 maX, 500, 650 | 715000547 |

TraILINg arm prOTeCTOrS1/8” (3 mm) thick lightweight and durable design. Replaces stock plastic protectors. Sold in pairs. Engraved Can-Am logo.

Outlander 2012 with 800 or 1 000 engine715001129 | Outlander (except one up 2012 with 800 or 1 000 engine) | 715000311 |

rear DIFFereNTIaL prOTeCTOr1/8” (3 mm) thick lightweight and durable design. Replaces stock plastic protector.

Outlander 2012 with 800 or 1 000 engine715000920 | Outlander (except 2012 one up with 800 or 1 000 engine) | 715000285 |

rear SKID pLaTe3/16” (4.5 mm) thick and die-formed for strength and durability. Must be installed with the central and front skid plates.

Outlander 2012 with 800 or 1 000 engine715000918 | Outlander 2006-2011 (except 400), 2012 500 & 650 and Outlander maX 2012715000609 | Outlander maX 500, 650, 800 | 715000610 | Outlander maX 400 only | 703500381 | Outlander 400 only | 703500382 |

CeNTraL aND FrONT SKID pLaTeTwo-pieces 3/16” (4.5 mm) aluminum full-body skid plate designed to protect frame and engine case from rough terrain conditions.

Outlander 400 only | 703500570 |


par

TS &

aC

CeS

SO

rIeS

• Ou

TLaN

Der

aTV

36

rear TruNK BOXPerfect fit with vehicle. Made of impact resistant polyethylene. Fully sealed lid. Tray quick-hooks to box. Equipped with lid key lock. The molded handle makes lifting and moving the box easy. Robust double wall lid. Improved trunk latch and attachment system on rack. Easy-install quick attach/detach system (715000273) available as an option. Fits any ATV on the market. Cannot be used with Rear Rack Extensions (703500537 & 703500538).

Outlander 2006-2011 & 2012 maX, 500, 650 | 715000626 | Black |

QuICK aTTaCh/DeTaCh SYSTem FOr rear TruNK BOX(Not illustrated)

Outlander 2006-2011 | 715000273 |

rear CargO BOXConvert your Outlander MAX into a versatile vehicle in only 30 seconds. Designed exclusively for the Outlander MAX, this latest-generation rear cargo box is built tough and made of high-resistance polyethylene plastic. Featuring a removable rear tailgate that also conveniently installs in the center of the box. Since it can handle a maximum payload of 260 lbs (118 kg), you’ll really hit paydirt with this cargo box. Dimensions: 35” (88 cm) W x 21” (54 cm) D x 7” (17 cm) H.

Outlander maX 2006-2012 | 715000734 | Black |

LINQ premIum 124L TruNK BOX wITh rear LIghTExtra large, innovative, fits up to 3 helmets. Color panels available for matching with your vehicle. Made of heavy-duty polypropylene. Weather-resistant lid gaskets seal out dust and moisture. Key locking latch. Offered with new LinQ system, i.e. tool-less installation and removal. Rear tail light included. For use with Outlander 2011 and earlier models or 2012 Outlander 400, 500 or 650, use LinQ Retrofit Adaptor Plate to fit your vehicle (715001334). Outlander 2012 with 800 or 1 000 engine Outlander 400, 500, 650 2012 & 2006-2011 (with LinQ retrofit adaptor plate (715001334)) 715000931 | eC Trunk Box without rear Light | 715001396

premIum TruNK BOX paNeL KITColor panels to match your LinQ Premium Trunk Box (715000931) to your vehicle. Fits LinQ premium 124L Trunk Box715001395 | Red715001392 | Yellow715001391 | Black715001397 | Black (EC)715001398 | Yellow (EC)

LINQ reTrOFIT aDapTOr pLaTeKit especially designed to allow the use of the new LinQ compatible Premium Trunk Box (715000931) on older Outlander models. Comes with specific harness for the Trunk Box Light.Outlander 2006-2011 and Outlander 2012 with 400, 500 & 650 engines715001334 |

rear COmparTmeNT STOrage 10L BagRoll top dry bag for protecting your cargo fully from the elements. Fits in innovative rear compartment of your Outlander.

Outlander 2012 with 800 or 1 000 engine | 708300460 |

New The LINQ SYSTem IS a STurDY FuLL-LOCK mOuNTINg SYSTem, FeaTureD ON a COmpLeTe LINe OF aCCeSSOrIeS. IT prOVIDeS aN eaSIer, FaSTer aND SeCure waY TO aTTaCh aND remOVe aCCeSSOrIeS ON YOur OuTLaNDer. YOu CaN NOw INSTaNTLY TraNSFOrm YOur VehICLe TO SuIT The NeeD OF The mOmeNT.

LINQ (repLaCemeNT parT)Unique mounting fastener usable on any LinQ system accessory. Tool-less installation and removal. Sold in pairs.


Fast – instantly “plug in” accessories

easy – no tools required

Secure – Full-lock mechanism

unique to BRP

40 LinQ Premium 124L Trunk Box with Rear Light

41 LinQ Retrofit Adaptor Plate42 LinQ Front & Rear Rack Extensions43 LinQ Deluxe Front

& Rear Modular Bags49 LinQ Mounted Gear Grips by Kolpin

Look for the logo to locate all the LinQ System accessories

COMPATIBLE WITH2006-2012 Outlander

3938

par

TS &

aC

CeS

SO

rIeS

• Ou

TLaN

Der

aTV


FrONT & rear raCK eXTeNSIONSOffers 4” (100 mm) or 7” (178 mm) of clearance with the existing racks. Secure bulky loads with its sturdy tube construction. Textured black finish.

Front Medium profile 4” (100 mm) Outlander 2011 and prior & 2012 maX, 500, 650 | 703500536 | High profile 7” (178 mm) Outlander 2011 and prior & 2012 maX, 500, 650 | 703500535 |

Rear Medium Profile 4” (100 mm) Outlander 2011 and prior and 2012 maX, 500 & 650 703500538 | High Profile 7” (178 mm) Outlander 2011 and prior & 2012 maX, 500, 650 703500537 |

LINQ FrONT & rear raCK eXTeNSIONSStrong and durable. Easy and tool less on Outlander 2012 thanks to new LinQ system. Helps keep cargo securely in place. Mounts in seconds. 4” Outlander 2012 with 800 or 1 000 engine 715000944 | 6” Outlander 2012 with 800or 1 000 engine715001187 |

premIum mODuLar BagMulti-configuration four section bag. Constructed of 600-denier, solution-dyed, water-repellent polyster. Semi-rigid thermoformed structure. Heavy-duty water-resistant zipper. Easily converts into a duffle bag.

Outlander 2006-2012 (except 800 or 1 000 engine) | 280000296 | Black |

FrONT Bag100% water-repellent polyester construction. Designed to fit with or without a rack extension. Integrated map holder. Waterproof zippers.

Outlander 2004-2005 | 295100276 Black | Outlander 2006-2011 | 715000235 Black |

rear Bag100% water-repellent polyester construction. Designed to fit with or without a rack extension. Waterproof zippers.

Outlander 2004-2005 | 295100277 | Black | Outlander 2006-2012 (except 800 or 1 000 engine) | 715000234 | Black

LINQ DeLuXe rear mODuLar 73L BagTool-less installation and removal. Versatile, rugged, spacious and attractive. Ideal for carrying anything you need in any conditions. Weatherproof, 100% watertight, scratch-resistant, with molded rubber bottom. Central compartment can be used alone, on the rack, with LinQ system. Bigger than front bag for extra volume and convenience.


LINQ DeLuXe FrONT mODuLar 44L BagTool-less installation and removal. Versatile, rugged, spacious and attractive. Ideal for carrying anything you need in any conditions. Weatherproof, 100% watertight, scratch-resistant, with molded rubber bottom. Central compartment can be used alone, on the rack, with LinQ system. Will not obstruct light beam on new 2012 Outlander Deluxe Fairing.


NONSKID Luggage raCK STrIpSRubber strips you can apply to your front and rear luggage racks to maintain your cargo in position. Helps keep your luggage rack scratch free. Easy to install. Sold in pack of 4.

Outlander 2006-2012 (except 800 or 1 000 engine) | 703500569 | Black |

40 Some models, tyres, and accessories depicted may not be available in your country. Please contact your brp dealer for more information. 41

par

TS &

aC

CeS

SO

rIeS

• Ou

TLaN

Der

aTV

uLTra hIgh wINDShIeLD KITProvides superior wind protection. 4” (10 cm) higher windshield. Added substructure to control vibration. Can-Am branded and color matched. Can be used on standard, XT and LTD models. Easy to install and remove.

Outlander 500, 650, 800 2011 and prior and 2012 maX, 500 & 650 715001018 | Yellow 715001019 | Red 715001020 | Tinted Black

hIgh wINDShIeLD KITThese Windshield Kits provide excellent wind protection. Can be used on standard, XT and LTD models. Easy to install and remove. Can-Am branded.

Outlander 500, 650, 800 2011 and prior and 2012 maX, 500 & 650715001015 | Yellow 715001016 | Red 715001017 | Tinted Black

wINDShIeLD KITCan be used with or without handlebar protectors. Includes steering cover. Easy to install and remove.

Outlander 400 | 703500444

DeLuXe wINDShIeLDFor wind protection and winter applications. Tool-less installation and replacement. Fits Deluxe Fairing (all colors).

Fits Deluxe Fairing715001211 |

DeLuXe FaIrINgInnovative, richly-featured wind protection. Quick tool-less removal once base brackets are mounted on handlebar. 2 cup holders. GPS-mounting-kit-ready. Optional mirrors & auxiliary lighting.

Outlander 2006-2012715000935 | Yellow715001231 | Red715001232 | Black

paSSeNger heaTeD grIpSHeat control can be set to High or Low. Ideal for replacing stock passenger handles. Added passenger comfort. Easily removable when Summer comes. Easy to install.

Outlander maX 2006-2012 | 715000634 |

paSSeNger wIND DeFLeCTOrSThese wind deflectors fit snugly around the passenger handles and provide total comfort while riding. Easy to install and remove.

Outlander maX 2004-2005 | 715000231Outlander maX 2006-2012 | 715000233

XT haNDLeBar prOTeCTOr KITAdd handlebar protection with our XT-style kit.

Outlander 500, 650 and 800 | 703100251 | BlackOutlander 400 2005-2011 | 715000271 | BlackOutlander 400 2005 | 715000272 | Grey

heaTeD VISOr OuTLeTStrategically positioned on the vehicle to help you maintain your agility.


ChOOSe YOur DeLuXe FaIrINg’S COLOr1 2 3BuY a DeLuXe

wINDShIeLDYOu maY aLSO waNT aS aN OpTION...

CuSTOmIzINg YOur DeLuXe FaIrINg IN 3 eaSY STepS

+ +gpS aDapTOr FOr OuTLaNDer LTD wINDShIeLDKit needed to install your GPS from LTD model when using a Can-Am windshield.

Outlander LTD 2010-2012 | 715000961Outlander 2009 and prior | 715000309

gpS mOuNTFor mounting a Garmin† Nuvi† GPS. Kit includes wiring harness and protective cover.

Fits Deluxe Fairing715000962 |

FLaSher aND hOrN KITComplete flasher and horn kit. Integrates to vehicle. Easy to install. Not for road use.

Outlander 800r 2009-2012 except 2012 with 800 or 1 000 engine | 715000695 |

gpS prOTeCTOr(Not illustrated) Provides extra protection from mud and dust. Covers GPS support when GPS is removed.

Outlander LTD 2010-2012 | 710002425Black |

DeLuXe mIrrOr KITTool-less installation. Wide rear view. Collapsible in case of an impact. Perfect fit with the Deluxe Fairing & Deluxe Windshield.

Fits Deluxe Fairing | 715001384 |

auXILIarY wINDShIeLD LIghTINgTwo premium LED spots for new Deluxe Fairing for both increased output and directional lighting.



4342

par

TS &

aC

CeS

SO

rIeS

• Ou

TLaN

Der

aTV


muDguarD KITKit designed to deliver extra protection from dirt and debris, therefore a must if you enjoy riding in the mud. Made of thermoformed plastic parts (except 2012 Outlander with 800 or 1 000 engine - made of injected plastic) that hug your Outlander fenders perfectly. Gives vehicle added flair for that rugged cool look. Includes front and rear extensions and all mounting hardware.

Outlander 400 2006-2011 | 715000297 | Black | Outlander 400 2004-2005 | 715000296 | Black | Outlander 500, 650, 800 2011 and prior & 2012 maX, 500, 650 | 715000533 | Black | Outlander 2012 with 800 or 1 000 engine | 715000940 | Black |

FeNDer prOTeCTOrSProvide extra fender protection when you’re in tight situations. 1” (25 mm) diameter steel construction with textured black finish.

Outlander 2006-2011 & 2012 500, 650 | 703500544 | Black | Outlander maX 2006-2012 | 703500546 | Black |

SNOrKeL KITThe only way to tackle extreme mud conditions. Snorkel kit comes complete with redesigned air-box with extended air intake and an extended CVT exhaust outlet conveniently integrated into the upper gauge pod, maximising mud condition performance. Standard equipment on X mr model.

Outlander 650, 800r 2010-2011 & 2012 maX, 650 | 715001136 |

OuTLaNDer X XC FrONT pre-ruNNer BumperLightweight yet sturdy aluminum bumper provides maximum frontal protection. Incorporated front skid plate, reinforced tubing and it still works with a winch.

Outlander 800r 2009, 2010-2011, 2012 maX, 500, 650 | 715001123 | Aluminum |

raDIaTOr reLOCaTOr KITRelocates radiator to a top mount position to prevent mud packing. For use in extreme mud conditions, providing maximum performance. Includes all brackets, hardware and hoses (radiator not included).

Outlander 650, 800r 2010-2011 & 2012 maX, 650 | 715001178 | Black |

X mr TraCTION pLaTeSProvide extra foot grip for driver when riding in extreme mud conditions. Help driver to maintain ideal riding position to maximize vehicle traction. Not meant for a passenger.

Outlander maX | 715001137 | Aluminum |

715000940

FrONT hpg ShOCK KITHigh pressure gas (HPG) shocks. Provides enhanced Outlander ride, handling and control. Razor sharp calibration for even the most demanding riders. Fade-free performance. Sold in pairs.

Outlander 650, 800 (except 2012 with 800 or 1000 engine) | 715000303 |

FOX ShOCKS(Not illustrated) This FOX shock kit has been engineered for the more aggressive riders. Offers increased bump absorption and better roll control. Offers a slightly firmer ride than standard but remains very useable for all around use. Kit includes 4 shocks and springs. Rebuildable. Threaded preload adjusters.

Outlander 2012 with 800 or 1000 engine | 715001471 |

FrONT SprINg KITFront heavy-duty springs. Stiffer than factory installed front springs for more precise front suspension behavior. Ideal for snow plowing or heavy load transportation applications. Sold in pairs.

Outlander 650, 800 Standard and XT models (except 2012 with 800 or 1000 engine) | 715000306 |

rear hpg ShOCK KIT wITh SprINgSOutlander 650, 800 Standard and XT models (except 2012 with 800 or 1000 engine) | 715000305 | Outlander 650, 800 XT models (except 2012 with 800 or 1000 engine) | 715000304 |

raDIaTOr prOTeCTOrMetal shield which mounts over radiator face providing protection from stones and branches.

Outlander 2006-2012 (except 800 or 1 000 engine) | 703500543 | Black | Outlander & rally 2004-2005 | 703500427 | Black |


par

TS &

aC

CeS

SO

rIeS

• Ou

TLaN

Der

aTV

FrONT hITChFront hitch for Outlander with or without a winch. This hitch offers 750 lbs (340 kg) of towing capacity. Allows you to maneuver your trailer easily in tight, confined areas. Needs to be installed with the winch fairlead bracket (715000696) for all Outlanders equipped with a winch.

Outlander 2006-2011 and prior & 2012 maX, 500, 650 | 703500421 | Black |

Outlander 2012 with 800 or 1 000 engine | 715000921 | Not EC certified

FrONT & rear hITCh DrawBarFits 2” receiver hitch that comes standard on Outlanders. Hitch ball not included.

Outlander 2012 with 800 or 1 000 engine | 715000972 | Outlander 2012 with 800 or 1 000 engine | 715001473 | Front & Rear EC Hitch Drawbar with 50mm European Ball

guN-BOOT SuppOrT(Not illustrated) Used in conjunction with the gun-boot. Attaches to the rear rack.

Outlander & rally (except maX and Outlander 2012 with 800 or 1000 engine) | 715000029 |

rewIND STarTer KITComplete manual rewind assembly.

Outlander 400 eFI 2010-2012715001034 |

TraILerINg COVer(Not illustrated) X-attachment system. 300-denier solution-dyed, water-repellent polyester construction. Fits with or without mirrors and windshield. Key areas are reinforced.

Outlander | 715000682 | Outlander maX | 715000681 | Outlander with Trunk Box | 715000675 |

STOrage COVerFor storage use only. Fits with or without windshield and mirrors. Heavy-duty elastic cord around bottom for secure fit. 100-denier polyester construction.

Outlander maX | 715000676 | Outlander | 715000677 |

Specifically designed for storage use only. Fits with or without windshield, mirrors and trunk box. Heavy-duty elastic cord around bottom provides secure fit. 100-denier Polyester construction.


guN BOOT† 6.0 ImpaCT† BY KOLpINFeatures largest interior room of all Kolpin Gun Boot cases. Extra room for pistol-grip-type weapons and small bipods. Easily fits firearms up to 51” in total length. Provides ample room for 60mm scopes. Hatchback design allows easy access. Snap-close cover with locking capability. Ergonomically design handle and molded attachment points for sling. Designed to accomodate left and right hand bolt-action rifles and shotguns. Includes removable, shock absorbing foam and nylon. Impact liner for superior interior protection. Requires appropriate mounting kit for installation.

Outlander | 715001419 | Black |

LINQ mOuNTeD gear grIpS BY KOLpIN†

Make transporting your tools. snap by combining the Gear Grips with the new LinQ system. Durable, flexible grips cushion and protect while providing a custom fit for a variety of items from 1 to 4 inches in diameter. Heavy-duty design for carrying bows, fishing poles, rakes, farm tools and more. Quick-release button opens grip quickly for easy access to gear. Heavy-duty base system built for the toughest adventures. 360° orientation. Sold in pairs.

Outlander 2012 with 800 or 1000 engine | 715001351 |

rear reCeIVer hITChPowder-coated finish. Does not affect ground clearance. Trailer ball not included. Rear hitch plate (715000286) is required for Renegade & Outlander X xc 2011. Includes Hitch Drawbar.

renegade & Outlander with hitch plate kit (except Outlander & renegade 2012 with 800 or 1 000 engine) | 715000325 |

46 47Some models, tires and accessories depicted may not be available in your country. Please contact your brp dealer for more information.

par

TS &

aC

CeS

SO

rIeS

• Ou

TLaN

Der

aTV

RENEGADE ATV

rear BagConstructed of 600-denier, solution-dyed, water-repellent polyester. Semi-rigid thermoformed structure. Quickly and easily converts into a practical backpack. (280000295 see p.55).

heaTeD haND grIpS & ThrOTTLe COmBONew ergonomically-designed control module. 4 different temperature settings with individual controls for your thumb and your grips. LED dimmer facilitates reading temperature settings. (715000915 see p.56).

TraILerINg COVer300-denier solution-dyed, water-repellent polyester construction. Fits with or without mirrors and windshield attachment brackets (windshield must be removed). (715000683 see p.55).

rear aLumINum raCK30 lbs capacity. Compact, lightweight aluminum construction.

uNDerBeLLY prOTeCTIONAluminum plates made with high strength 5052 H32 aluminum and plastic deflector to protect your frame from the unexpected - a must-have for rugged terrains.

muDguarD KITIntegrated extended fender flairs for sporty look and full body protection from dirt and water.

ShOCK COVerS

haNDLeBar wIND DeFLeCTOrSAdd comfort while riding with these rugged injected plastic Handlebar Wind Deflectors.

52 Underbelly Protection53 Windshields, Mudguard

& Light54 Shocks & Hitch55 Covers, Rack & Bag56 Shock Protectors, Filters

& Grips57 Handlebars & Mirrors58 Rims

SpOrT wINDShIeLDOffers wind protection to your Renegade without compromising its sporty look. Easy mounting system.


par

TS &

aC

CeS

SO

rIeS

• reN

ega

De aTV

48 49

muDguarD KITIntegrated extended fender flairs for sporty look and full body protection from dirt and water. Kit of 4 includes front and rear extensions and all mounting hardware.

renegade 2007-2011 | 715001115 | Black | renegade 2012 | 715001208 | Black |

SpOrT wINDShIeLDOffers wind protection to your Renegade without compromising its sporty look. Fits straight and tapered handlebars. Easy mounting system allow you to install it effortlessly.

renegade 2012 and prior (all engines)715001212 | Yellow 715001429 | White 715001468 | Black

CeNTer CONSOLe DaY LIghTMountable on top end of center console. Enhances the look of the vehicle.

renegade | 715000691 | Shown picture repreSentS the renegade new platform (with 800 or 1 000 engine). for other renegade modelS, picture may differ.

a-arm prOTeCTOrSAdd protection to your lower A-Arm. Drain hole to release water, mud and debris. 1/8’’ (3 mm) thick lightweight and durable design. Easy to install. Replace stock plastic protectors. Engraved Can-Am logo. Sold in pairs.

renegade 2012 with 800 or 1 000 engine715000911 | renegade (except 2012 with 800 or 1 000 engine) | 715000287 |

FrONT SKID pLaTe3/16” (4.5 mm) thick and die-formed for strength and durability. Engraved Can-Am logo. Stamped 1/8” (3 mm) aluminum construction. Recessed bolt holes. Cannot be installed with Plow Mounting Kit.

renegade 2012 with 800 or 1 000 engine 715000925 |

CeNTraL ChaSSIS SKID pLaTe3/16” (4.5 mm) thick and die-formed for strength and durability. Engraved Can-Am logo. Standard on X xc model.

renegade 2012 with 800 or 1 000 engine715000923 | Stamped 1/8’’ (3 mm) aluminum. Recessed bolt holes. Cannot be installed with Plow Mounting Kit. Engraved Can-Am logo.

renegade (except 2012 with 800 or 1 000 engine) | 715000636 |

FOOTweLL prOTeCTOr pLaTeSBump up the impact protection to the footwells and structure. 1/8” (3 mm) thick lightweight and durable design. Use in conjuction with Central Chassis Skid Plate. Sold in pairs.

renegade 2012 with 800 or 1 000 engine715001359 | renegade except 2012 with 800 or 1 000 engine | 715000686 |

rear DIFFereNTIaL prOTeCTOr1/8” (3 mm) thick lightweight and durable design. Replace stock plastic protector.


TraILINg arm prOTeCTOrS1/8” (3 mm) thick lightweight and durable design. Replace stock plastic protectors. Engraved Can-Am logo. Sold in pairs.


rear SKID pLaTe3/16” (4.5 mm) thick and die-formed for strength and durability.

renegade 2012 with 800 or 1 000 engine715000918 | 1/8” (3 mm) aluminum plate. Must be installed with the Central and Front Skid Plate (703500570). Outlander MAX 400 only.

renegade 2006-2011 | 715000609 |



COMPATIBLE WITHRenegade 2006-2012


par

TS &

aC

CeS

SO

rIeS

• reN

ega

De aTV

50

LICeNSe pLaTe BraCKeTFor supporting your license plate.

renegade 2012 with 800 or 1 000 engine | 715001401 |

X paCKage rear ShOCK SprINg KITRebound and dual speed compression adjustable gas shocks. Kit includes matching springs and hardware. Sold in pairs.

renegade 2008-2011 & 2012 with 500 engine | 715000538 |

X paCKage FrONT ShOCK SprINg KITRebound and dual speed compression adjustable gas shocks. Kit includes matching springs and hardware. Sold in pairs.

renegade 2008-2011 & 2012 with 500 engine | 715000536 |

FrONT SwaY Bar KITEnhances vehicle stability and control during hard cornering.

renegade 2010-2011 | 715000967 |

TraILerINg COVer300-denier solution-dyed, water-repellent polyester construction. Fits with or without mirrors and windshield attachment brackets (windshield must be removed). Key wear areas are reinforced.

renegade (all models) | 715000683 |

STOrage COVer(Not illustrated) Specifically designed for storage use only. Fits with or without windshield and mirrors. Heavy-duty elastic cord around bottom provides secure fit. Vinyl construction.

Vinyl construction renegade (all models) | 715000678 |

rear BagConstructed of 600-denier, solution-dyed, water-repellent polyester. Semi-rigid thermoformed structure. Quickly and easily converts into a practical backpack. Heavy-duty water-resistant zipper. Easy to install and remove.

renegade (all models) | 280000295 | Black |

rear aLumINum raCK30 lbs (14 kg) capacity. Compact, lightweight aluminum construction. Engraved Can-Am logo. Stamped 5052 aluminum center plate. Easy to install.

renegade 2007-2012 except 2012 with 800 or 1000 engine | 715000242 | renegade 2012 with 800 or 1000 engine | 715001360 |

rear hITCh pLaTeBolt-on hitch plate and hardware.

renegade & Outlander X xc 2007-2012 (except 2012 with 800 or 1000 engine) | 715000286 |

rear reCeIVer hITChTransforms your Renegade into the same working machine that is the Outlander.

renegade 2012 with 800 or 1 000 engine | 715001329 |


par

TS &

aC

CeS

SO

rIeS

• reN

ega

De aTV

uNI† FOam FILTerEase of maintenance. Can be easily washed, re-oiled and re-used when subject to severe dusty/muddy environments. Contains a rigid adaptor with an added flair providing adequate retention of the air filter.

Outlander 500, 650, 800 & renegade 2010-2011 and prior (except 2010-2011 800r and 650 | 715000310 |

CaN-am FOam aIr FILTer BY TwINaIr†

Maximizes performance by increasing air flow throughout RPM range. Maintenance-friendly, i.e. just wash, re-oil and re-use after riding in severely dusty/muddy environments.

renegade & Outlander 800r 2009-2011, 2010-2012 650 and 2012 maX, 650 & 800 | 715001130 |

heaTeD haND grIp KITKeep your hands warm while riding with this easy-to-install hand grip kit. Includes a 3-position switch, switch cover, wiring harness, hand grip and handlebar end cap. Grips are 4 7/8” (12 cm) long with an interior diameter of 7/8” (22 mm). Grip heat control can be set to High (20 watts) or Low (10 watts).

renegade & Outlander (except 2012 with 800 or 1 000 engine) | 715000322 |

heaTeD ThrOTTLe LeVer aSSemBLYImproved heating element provides faster warm up time and increased maximum temperature. For a perfect fit and finish, designed especially for your Can-Am ATV. Kit includes a 3-position switch, switch cover, wiring harness and throttle lever assembly.

renegade & Outlander (except 2012 with 800 or 1 000 engine) | 715000584 |

ShOCK prOTeCTOrProvides X-package shock rods with additional protection against pitting.

Fit X-package KYB shocks | 715001209 | Black |

FrONT ShOCK COVerSFeatures ventilation holes. Sold in pairs.

renegade & Outlander | 715500301 |

LOCKaBLe gaS TaNK CapProtects your fuel. Meets latest EPA requirements.

renegade & Outlander | 860200387 | Black |

aIr preFILTerFilters out even the tiniest of contaminants in dusty conditions. Extends the service period. Use in conjunction with the stock filter. Air filter not included.

DS 450 & Outlander 400 | 707800293 |

ShIFTer LOCKLocking device locks transmission shifter in “Park” position. Minimum 5,000 key combination. Fully integrated.

renegade & Outlander 500, 650, 800 2009-2011, 2012 maX, 500 & 650 | 715000689 | Outlander 400 | 715000690 |

haNDLeBar wIND DeFLeCTOrSRugged injected plastic construction with Can-Am logo. Includes removable cap for air flow adjustment. Mounting kit sold separately.

renegade, Outlander 500, 650, 800, 1 000 & DS 450 | 715000733 | Yellow/Black | 715000537 | White/Black | 715000525 | Black/Yellow |

mIrrOr KIT FOr haNDLeBar wIND DeFLeCTOrSHandlebar wind deflector mount design. To be used with handlebar wind deflectors. Sold in pairs.

renegade, Outlander 500, 650, 800, 1 000 & DS 450 | 860200080 |

FuLL wrap aLumINum mOuNTINg KITLightweight black die cast aluminum construction. Includes complete hardware. Handlebar wind deflectors sold separately.


ShOrT aLumINum mOuNTINg KITLightweight black die cast aluminum construction. Includes complete hardware. Handlebar wind deflectors sold separately.


XT haNDLeBar prOTeCTOr KITAdd handlebar protection with our XT-style kit.

Outlander 400 2004 715000272 | Grey

Outlander 400 2005-2011 715000271 | Black

aLumINum TapereD haNDLeBar7/8’’- 1 1/8’’ (22 mm x 28 mm) tapered handlebar made of 6061-T6 aluminum. Includes all hardware, center steering foam and cover.

renegade & Outlander 500, 650, 800, 1 000 | 715000550 |

heaTeD haND grIpS & ThrOTTLe COmBONew ergonomically-designed control module. 4 different temperature settings with individual controls for your thumb and your grips. LED dimmer facilitates reading temperature settings. Returns to previous heat setting. One touch shutdown. New Can-Am branded grip design.

Outlander & renegade 2012 with 800 or 1 000 engine | 715000915 |


par

TS & aCCeSSO

rIeS • reNega

De &

OuTLa

ND

er aTV

OuTLaNDer rImSSilver with clear coat aluminum wheels.

renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401088 | Silver and clear coat | Rear 12” x 7.5” 705501460 | Silver and clear coat |

OuTLaNDer XT rImSBlack with machining and clear coat aluminum wheels.

renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401078 | Black with machining and clear coat | Rear 12” x 7.5” 705501458 | Black with machining and clear coat |

OuTLaNDer rImS (CamO mODeL)Black with clear coat aluminum wheels.

renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401127 | Black and clear coat | Rear 12” x 7.5” 705501493 | Black and clear coat |

reNegaDe rImSBlack with clear coat aluminum wheels.

renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401091 | Black and clear coat | Rear 12” x 7.5” 705501465 | Black and clear coat |

reNegaDe X XC rImSBlack with clear coat aluminum wheels. Must be installed with Yellow Beadlock (705401156).

renegade & Outlander 2012 with 800 or 1 000 engine Front 12” x 6” 705401155 | Black and Yellow Beadlock | Rear 12” x 7.5” 705501522 | Black and Yellow Beadlock |

OuTLaNDer X mr rImSBlack with machining and clear coat wheels.

Front & Rear 14” x 6” Outlander X mr | 705400877 | Black and machined |

BeaDLOCKCast aluminum Beadlock. Must be installed on Front Rim (705401155) and Rear Rim (705501522). Needs 16 bolts (250000435) per wheel.

renegade & Outlander 2012 with 800 or 1 000 engine | 705401156 | Yellow |

XT rImSMade of aluminum. Upgrade for non XT models.

renegade & Outlander (except 2006, 800 2012 with 800 or 1 000 engine) Front705400648 | Rear705500986 |

XT-p rImSMade of aluminum. Upgrade for non XT models.

Frontrenegade & Outlander 650 and 800 (except 2006 800, 2012 with 800 or 1 000 engine) | 705400687 | Rearrenegade & Outlander (except 2006 800, 2012 with 800 or 1 000 engine) | 705501019 |

LTD rImSMade of aluminum. Upgrade for non XT models.

Frontrenegade & Outlander 650 and 800 (except 2006 800, 2012 with 800 or 1 000 engine) | 705400683 | Rearrenegade & Outlander (except 2006 800, 2012 with 800 or 1 000 engine) | 705501015 |

XTr CuSTOm rIm KITCustom Can-Am XTR branded 12” (30 cm) painted aluminum rims. Includes matching chrome nuts and center covers. Set of 4.

renegade, Outlander, except Outlander 800 2006 | 715000611 | Black |

reNegaDe rImSCenter cast aluminum rims.

Frontrenegade & Outlander (except 2006 800, 2012 with 800 or 1 000 engine) | 705400506 | Rearrenegade & Outlander (except 2006 800) | 705500837 |

COLOreD FINS FOr rImSPlastic fins that enhance appearance of your vehicle. Pack of 8. Fits on following wheels: XT, XT-P and LTD 2010 & 2011 (705500986, 705501015, 705501019, 705400687, 705400648, 705400683)

705400681 | Yellow | 705400950 | Steel Grey |

NOTe: maTChINg NuTS - 250100100 BLaCK aND 250100082 ChrOme — maTChINg Cap - 705400680 BLaCK NOTe: maTChINg NuTS - 250100100 (eXCepT 250100082 FOr OuTLaNDer rImS (705401088 & 705501460)) — maTChINg Cap - 705400928

NOTe: maTChINg Cap - 705400963 — maTChINg NuTS - 250100100

BeaDLOCKCast aluminum. Must be installed on rims 705400945 and 705501137. Needs 16 bolts (250000435) per wheel.

renegade & Outlander 650 and 800 (except 2006 800, 2012 with 800 or 1 000 engine) | 705400841 | Yellow |

reNegaDe X rImSCenter cast aluminum rims. Welded exterior and interior reinforcement rings. Needs to be installed with Bead Lock (705400841).

renegade & Outlander 650 and 800 (except 2006 800, 2012 with 800 or 1 000 engine) Front705400945 | Rear705501137 |


par

TS & aCCeSSO

rIeS • reNega

De &

OuTLa

ND

er aTV

DS 450 ATV

62 Underbelly Protection63 Rims, Shocks & Covers64 Bumper, Speedometer

& Sprockets

TraILerINg COVer300 denier solution-dyed, water-repellent nylon. Key areas are reinforced. Includes sponsor graphics. (280000346 see p.63).

DIgITaL SpeeDOmeTer Reliable speed sensor built into transmission and extra race functions - maximum speed, average speed, lap counter... (715000512 see p.64).

rIm KITS Front and rear rim kits for X, X xc and X mx models. (See p.63).

NerF BarS Provides extra protection for assertive riding.

FrONT aLumINum Bumper Extra-large and lightweight front bumper offers the best protection for all forms of racing.

DIgITaL SpeeDOmeTer

NumBer pLaTe

haNDLeBar wIND DeFLeCTOrS Add comfort and protection while riding.

uNDerBeLLY prOTeCTION Save your frame from the unexpected with these rough and durable underbelly protectors.

FrONT ShOCKS Ultra-high performance KYB† fully adjustable shock. Includes rebound and high/low speed compression adjustments.


par

TS &

aC

CeS

SO

rIeS

• DS

45

0 aTV

58 59

a-arm prOTeCTOrSLighweight injected plastic A-arm protectors provide strong protection for lower aluminum A-arm. Can-Am branding visible from top and underneath vehicle. Easy installation, no holes to drill. Sold in pairs.

DS 450 except X mx model715000517 | Black | DS 450 | 715000589 | Yellow

X paCKage ChaSSIS SKID pLaTeLightweight and strong full chassis skid plate. 5052 1/8’’ (3 mm) stamped aluminum construction. Recessed bolt holes. Includes all necessary hardware.

DS 450 | 715000506 |

FrONT FeNDer eXTeNSIONLightweight aluminum extension connects the front fender to the nerf bar. Sold in pairs.

DS 450 | 715000514 |

X paCKage NerF BarSStrong lightweight rectangular aluminum tubing provides extra protection for assertive riding. Complete with mounting hardware and black webbing. Must be installed with Rear Aluminum Baskets (715000673). Sold in pairs.

DS 450 2009-2012 | 715000672

DS 450 2008 and prior715000505 |

rear aLumINum BaSKeTSFor direct replacement of stock plastic version. 1/8” (3 mm) 5052 aircraft aluminum construction and 7/8” (22 mm) tubing. Stronger construction than stock model.

Must be installed with X Package Nerf Bars (715000672). DS 450 with X package 2009715000673 | Can be installed with or without X Package Nerf Bars (715000505). DS 450 2008 and prior715000526 |

X paCKage SwINg arm SKID pLaTeLightweight protection for your swing arm, rear disc, sprocket and chain. 5052 3/16’’ (4.5 mm) aluminum construction. Replaces stock plastic protector.

DS 450 | 715000507 |

X XC FrONT rIm KITDimensions: 10” x 5” (25 cm x 13 cm) diameter. ITP T-9 Trac-Lock wrims. Sold in pairs.

DS 450 | 715000902 |

X XC rear rIm KITDimensions: 9” x 8” (23 cm x 20 cm) diameter. ITP T-9 Trac-Lock rims. Sold in pairs.

DS 450 | 715000905 |

X mX FrONT rIm KITDimensions: 10” x 5” (25 cm x 13 cm) diameter. ITP T-9 Trac-Lock rims. Sold in pairs.

DS 450 | 715000903 |

X mX rear rIm KITDimensions: 8” x 8” (20 cm x 20 cm) diameter. ITP T-9 Trac-Lock rims with Beadlock and inside reinforcement. Sold in pairs.

DS 450 | 715000906 |

X paCKage reINFOrCeD rIm KITBlack painted aluminum rims with exterior reinforcement ring. Sold in sets of 4. Beadlock with inside reinforcement.

DS 450 | 715000510 |

X paCKage aDjuSTaBLe FrONT ShOCKSUltra-high performance KYB† fully adjustable shock. Includes rebound and high/low speed compression adjustments. More performance oriented valving than stock vehicle. Use original stock spring. Sold in pairs.

DS 450 | 715000511 |

FrONT ShOCK COVerSOffer added protection against tough terrain and weather conditions. Sold in pairs.

DS 450 | 715500302 |

STOrage COVer(Not illustrated) For storage use only. Fits with or without windshield and mirrors. Heavy-duty elastic cord around bottom for secure fit.

Vinyl construction DS 450 | 280000347 |

DS 450 TraILerINg COVerX-attachment system. 300-denier solution-dyed, water-repellent nylon. Key areas are reinforced. Includes sponsor graphics.

DS 450 | 280000346 |

SAVE YOUR FRAME FROM THE UNEXPECTED WITH THESE ROUGH AND DURABLE UNDERBELLY PROTECTORS.


par

TS &

aC

CeS

SO

rIeS

• DS

45

0 aTV

60

DS 250 ATV

FrONT BumperAdds extra protection to the front of your vehicle.

DS 250 | 715000172 |

FrONT Bumper BraCKeTFor installing the Front Bumper (705000387) to your DS 250.

DS 250 | 715000241 |

a-arm prOTeCTOrSThese aluminum guards provide maximum A-arm protection.

DS 250 | 703500618 |

NerF BarSStrong lightweight rectangular aluminum tubing provides you with extra protection for aggressive riding. Complete with mounting hardware and black webbing. Sold in pairs.

DS 250 | 703500617 |

FuLL-BODY SKID pLaTeAluminum full chassis skid plate designed to protect your frame and engine case from rocks and undercarriage damage. Maximum underbody protection when driving your DS 250 on the most rugged terrain.

DS 250 | 703500616 |

rear raCKSturdy steel construction, powder paint finish. Can be used with rear rack bag (715000264).

DS 250 | 715000243 | Black |

mIrrOrStem Includes 5/16” (8 mm) thread.

DS 250Right | S88110RA1000Left | S88120RA1000

rear raCK Bag100% water-repellent polyester bag. Specially designed to fit on the rear rack (715000243).

DS 250 | 715000264 | Black |

STOrage COVer(Not illustrated) For storage use only. Fits with or without windshield and mirrors. Heavy-duty elastic cord around bottom for secure fit.

Vinyl construction DS 250 | 715000261 |

X paCKage FrONT aLumINum BumperExtra-large and lightweight front bumper offers the best protection for all forms of racing. 6063 aluminum construction. Provides superior coverage to the front of your DS 450. Required to install the number plate.

DS 450 | 715000508

NumBer pLaTeInjection molded high gloss finish. To be used with X Package front aluminum bumper (715000508).

DS 450715000521 | Black 715000522 | Yellow

FrONT SprOCKeTSHardened steel construction. Changing sprocket ratio will vary vehicle top speed and behaviour. Includes snap ring. For racing applications only.

DS 45013-tooth (-1) | 71500051914-tooth (stock) | 71500059115-tooth (+1) | 715000518

rear SprOCKeTSLightweight 7075 T-6 aluminum construction. Changing sprocket ratio will vary vehicle top speed and behaviour. For racing applications only.

DS 45039-tooth (-3) | 71500052742-tooth (stock) | 715000592

44-tooth (+2) | 715000515 |

regINa z-rINg ChaINThis chain is the best choice for the most severe and demanding applications. Among other characteristics, the ZR chains feature high alloy steel plates and pins, solid bushings and rollers, shot-peening of plates, pins and rollers, performance-enhancing pre-stretching and “Can-Am yellow” outer plates. Stronger than stock chain (32000N). 102 link to match with different sprocket sizes. Includes connecting link.

DS 450 | 715000523 |

FrONT pLaSTIC grILLeAdd color to your vehicle.

DS 450 2009 and prior | 715000516 |

SpeeDOmeTerDigital speedometer. Complete kit with mounting pod. Includes reliable speed sensor built into transmission and extra race functions, e.g. maximum speed, average speed, lap counter, comparative average vs. actual speed and RPM. Easy to install.

DS 450 2009-2012 | 715000512 |


par

TS &

aC

CeS

SO

rIeS

• DS

25

0 aTV

63

CVT pre-FILTerDesigned to prevents snow intrusion in the CVT and belt slippage when Apache Track System is used in deep snow. Easy to install and remove. Comes standard on Renegade and Outlander 800 2009.

renegade & Outlander 500, 650, 800, 2009 and prior715000552 |

TRACK SYSTEMS HAVE ENABLE YOU TO WORK, RIDE AND PLAY DURING WINTER TIME BY REPLACING WHEELS WITH TRACKS. IN 2009, BRP INTRODUCED THE LARGEST TRACK SYSTEM ON THE MARKET FOR MAXIMUM RELIABILITY AND FLOTATION. ThiS yEAR, ThE DEVELOpmENT TEAm bROUGhT ThE iDEA EVEN fURThER by DESiGNiNG ThE bEST yEAR-ROUND kiT ON ThE mARkET.

CVT aIr INTaKeDesigned to relocate and maximize height of CVT air intake to prevent belt slippage in deep snow or muddy conditions. Equipped with integrated CVT pre-filter to also reduce dust and extend CVT and belt life.

renegade 500, 800 2007-2009715000984 Outlander 500, 650, 800 2008-2009715000970

aIr pre-FILTerAdd extra protection for your engine in harsh riding conditions. Filter blocks particles larger than 0.005’’. Note: pre-filter is necessary to maintain the vehicle warranty when an Apache system is installed.

renegade & Outlander 500, 650, 800 2008 and prior, 500, 650 2009 & 500 2010 | 715000291 |

aIr BOX pre-FILTer(Not illustrated) Add extra protection for your engine in harsh riding conditions. Filter blocks particles larger than 0.005’’. Note: pre-filter is necessary to maintain the vehicle warranty when an Apache system is installed.

renegade & Outlander 650 2010-2012, 800r 2009-2011, 2012 maX & 500 | 715000908 |

New track design and rubber for more traction in snow or any other type of ground surface.

New innovative tensioner system for track. Ultra light and easy to use. Same for front and rear track.

Biggest contact patch, highest ground clearance, lowest steering effort, reduced friction and vibration with heightened rubber overmold wheels.

ApAchE 360 TRAck kiT


/ The new Apache 360 Track Kit offers the biggest contact patch, highest ground clearance and lowest steering effort.

/ With its heightened rubber over mold wheels, friction and vibration are reduced to a minimum.

/ A new track design provides ultimate traction in any terrain.

/ The conversion from tires to tracks can be made in less than 20 minutes using the Apache 360 Mounting Kit. There is no excuse not to get out and ride.

/ The DPS Module, when installed with the Apache 360 system optimizes your Dynamic Power Steering (DPS) performance, maximizing steering agility at lower speeds while providing

firmer steering at cruising speeds. In addition, it provides a speed correction factor for the speedometer so that your speedometer indicates the proper speed when running with your tracks installed.

apaChe 360 mOuNTINg KIT(Not illustrated) Simple system that reduces installation time. Select the right one to equip your vehicle with the Apache 360 Track Kit. Includes DPS Module.

Outlander 2012 with 400, 500 & 650 engines, Outlander 2011 and earlier | 715000937Outlander 2012 with 800 or 1 000 engine 715001328

DpS mODuLe(Not illustrated)

Outlander 2012 with 800 or 1 000 engine 715001202

apaChe 360 TraCK KITBest year-round kit on the market, even better than the leading Apache WT. Biggest contact patch, highest ground clearance and lowest steering effort. Quick conversion from tires to tracks in less than 20 minutes for the fastest switch. Reduced friction and vibration with heightened rubber over mold wheels. New track design and rubber for more traction in snow or any other type of ground surface.

Outlander | 715000938 |


par

TS &

aC

CeS

SO

rIeS

• apa

Ch

e 36

0 Tr

aC

K K

IT

64

PuSH EvERYTHiNG You’vE EvER KNoWN ABouT SNoW PLoWS ouT oF YouR MiND, AND MAKE WAY FoR A NEW ATv-SPECiFiC PLoW MADE oF viRTuALLY iNDESTRuCTiBLE MATERiAL ALSo DESiGNED fOR ULTimATE pROTEcTiON.

We’ve bent all the rules to redefine toughness

a FIrST ON maNY FrONTS/ First plow entirely and specifically engineered for a Can-Am ATv

/ First commercial grade plow for personal recreational vehicle use

/ First plow blade made of flexible uHMW, the highest impact strength of any thermoplastic presently made

The New CaN-am aTV ALpiNE fLEX pLOW

The ulTimaTe alpiNe Flex plow: builT guaraNTeed Tough, smarTly

eNgiNeered For easy FuNCTioNaliTy aNd uNpreCedeNTed proTeCTioN.

pLOwS

puSh FrameS

FOr aLpINe Super DuTY pLOwS

- Alpine Flex Plow- Alpine Super Duty Straight or One Way State Plow

Super duty push tubes withstand the roughest use. Mid-mount carriage provides up to 11 1/2” (29 cm) of lift. Push frame fits all blade styles.

aLpINe FLeX pLOw 60”New innovative market trend leader. New plow blade made of flexible UHMW, the highest impact strength of any thermoplastic presently made. Enormous flex action protects the driver, unit and object accidentally impacted. Impact absorption properties return plow to its original shape. Rearward release action practically eliminates jolts from being transferred to the driver or unit. Attaches and detaches effortlessly thanks to the fastest and easiest push frame mounting system on the market. Groundbreaking reinvented blade turning mechanism mounted as high as possible to eliminate having to bend down to change or adjust blade’s angle. High pivot point keeps plow on pavement. Compatible with all Alpine Flex Plow accessories to further enhance plow versatility.

Outlander 2006-2012 and renegade 2007-2009 and 2012 | 715001181 |

aLpINe FLeX puSh Frame eXTeNSIONBolt-on push frame extension for use with Apache 360 Track Kit. Does not alter plow functionality. Fits Alpine Flex Push Frame (715001467 & 715001472).

Fits alpine Flex plow | 715001389 |

aLpINe Super DuTY puSh Frame eXTeNSION12 1/4” (31 cm) chassis extension for use with Apache Track Systems. Increases angle and enables extra blade rotation. Fits on Alpine Super Duty Push Frame (715001063, 715001064, 715001182 & 715001474).

Fits alpine Super Duty plow | 703500603

aLpINe Super DuTY puSh FrameSuper duty push tubes withstand the roughest use. Mid-mount carriage provides up to 11 1/2” (29 cm) of lift. Push frame fits all blade styles. Quick-attach not included.

Outlander 2011 and prior & 2012 with 400, 500, 650 engines & renegade 2011 & prior715001064 | Black |

aLpINe Super DuTY QuICK-aTTaCh SYSTemAvailable as an option to upgrade Alpine Super Duty Push Frame (715001064). The plow will be easy to install with this quick attach system. Durable with a powder-coated rust-resistant finish.

Fits alpine Super Duty pLow715000731 |

aLpINe Super DuTY remOTe aNgLINg SYSTemIncreases operator convenience. Swivel system allows the driver to manually pivot the plow blade from the driver’s seat. Cannot be used with the Alpine Super Duty Push Frame Extension (703500603).

Fits alpine Super Duty plow | 715000260

aLpINe Super DuTY puSh Frame wITh QuICK aTTaCh SYSTemSuper duty push tubes withstand the roughest use. Mid-mount carriage provides up to 11 1/2” (29 cm) of lift. Push frame fits all blade styles. Fully assembled quick-attach system. Pin-ready for reduced installation time. Fits on Plow Mounting Kit (715000586, 715000258 & 715001206).

Outlander 2011 and prior & 2012 with 400, 500, 650 engines & renegade 2011 & prior715001063 | Black |

aLpINe Super DuTY puSh FrameTubes withstand roughest use. Mid-mount carriage provides up to 11 1/2” (29 cm) lift. Fits all blade styles. Fits on Plow Mounting Kit (715001411 & 715001412) depending on your vehicle platform. Includes cable saver limit switch and plow roller fairlead.

Outlander 2006-2012 except X xc 2011 715001182 renegade 2007-2009 & 2012715001474

aLpINe FLeX puSh FrameRearward release action practically eliminates jolts from being transferred to the driver or unit. Attaches and detaches effortlessly thanks to fastest and easiest mounting system on the market. Groundbreaking reinvented blade turning mechanism mounted as high as possible to eliminate having to bend down to change or adjust blade’s angle. High pivot point keeps plow on pavement. Compatible with all Alpine Flex Plow accessories to further enhance plow versatility. Includes Plow Roller Fairlead and cable saver limit switch.

Outlander 2006-2012, except X xc 2011715001467renegade 2007-2009 & 2012715001472

COMPATIBLE WITH2006-2012 Renegade & Outlander

New

or

BuILD YOur pLOw SYSTem

Tra

XTe

r &

Q

ueS

T

Ou

TLa

ND

er

40

0 0

4-0

5

Ou

TLa

ND

er

40

0/5

00

/65

0

06

-12

Ou

TLa

ND

er

800

06

-11

Ou

TLa

ND

er

800

/10

00

20

12

Ou

TLa

ND

er

X/X

C 2

011

reN

ega

De

0

7-0

9

reN

ega

De

10

-11

reN

ega

De

20

12

pLO

wS

Alpine Flex Plow 60” 715001181

Alpine Super Duty One Way State Plow 66” 715000650

Alpine Super Duty One Way State Plow 60” 715000649

Alpine Super Duty Straight Plow 60” 715000648

Alpine Super Duty Straight Plow 54” 715000647

puS

h F

ra

meS

Alpine Flex Push Frame Quick Attach 715001467

Alpine Flex Push Frame Quick Attach 715001472

Alpine Super Duty Push Frame Quick Attach 715001182



Alpine Super Duty Push Frame 715001064

mO

uN

TIN

g K

ITS Mounting Kit 715001206

Mounting Kit 715000586




a Find your model.

B Choose your Plow and note the color of the box.

C Choose a Push Frame and a Mounting Kit related to this same color.

mODeLS

aLpINe Super DuTY ONe waY STaTe pLOwOne-way “winged” state plow designed to throw snow higher. Wing end of plow measures 25” (63 cm) high and tapers down to 16” (41 cm). Rubber flap designed to keep snow away from driver. Yellow-colored version Can-Am branded.

66” (1.68 m) Outlander & renegade (all models)715000650 | Yellow 715000253 | Black


aLpINe Super DuTY STraIghT pLOwSuper duty plow blades made from 12-gauge steel. Replaceable wear blades. When angled, 60” (1.5 m) blade clears 53 1/2” (1.36 m) path, 54” (1.37 m) blade clears 48” (1.23 m) path. Blades swivel left or right, 5 positions. Large pin designed for easy blade rotation to eliminate dirt and snow buildup at pivot point. Blade design provides best snow/dirt roll-off at any angle. Yellow-colored version Can-Am branded.

60” (1.5 m) Outlander & renegade (all models)715000648 | Yellow715000209 | Black


/

/

FOr aLpINe FLeX pLOw


par

TS &

aC

CeS

SO

rIeS

• pLO

wS

XT15 warN wINCh KITLightweight Warn 1,500 lbs (680 kg) winch kit complete with synthetic rope, roller fairlead, mounting plates and hardware. Specifically designed for the Renegade.

renegade (except 2012 with 800 or 1000 engine) | 715000254 |

XL2500 wINCh KIT(Not illustrated) Complete 2,500 lbs (1,134 kg) winch and mounting kit including a roller fairlead.

Traxter & Quest | 715000546 |

wINCh BraKe KIT(Not illustrated) Upgrades standard winch with brake kit. Convenient for use with plow.

Fits all 2011 and prior production Outlander with XL3000 winch715001135 |

rT25 warN† wINCh KITFully-sealed winch with a pulling strength capability of 2 500 lbs (1,134 kg). Includes a 0.9hp motor, 50’ (15 m) of 3/16” (5 mm) wire rope, an ergonomically designed clutch knob, mechanical brake, hand-held remote, potted-and-sealed mini-rocker handlebar switch, waterproof contactor and roller fairlead. CE certified.

Outlander, renegade 2012 with 800 or 1000 engine (winch mounting plate required for renegade) 715001347Outlander, renegade (except 2012 with 800 or 1000 engine)715000553

rT30 warN wINCh KITFully-sealed winch with a pulling strength capability of 3,000 lbs (1,361 kg). Includes a 0.9hp motor, 50’ (15 m) of 3/16” (5 mm) wire rope, an ergonomically designed clutch knob, mechanical brake, hand-held remote, potted-and-sealed mini-rocker handlebar switch, waterproof contactor and roller fairlead. CE certified.

Outlander, renegade 2012 with 800 or 1000 engine (winch mounting plate required for renegade) 715001348Outlander, renegade (except 2012 with 800 or 1000 engine)715000528

wINCh mOuNTINg KIT(Not illustrated)

Traxter | 715500108 |

OuTLaNDer X XC wINCh mOuNTINg KITRequired for winch installation on models equipped with the X xc bumper. Must be used in conjunction with winch mounting kit (703500547) and roller fairlead (715000011) (Winch not included).

Outlander with X xc bumper | 715001121Black |

wINCh mOuNTINg pLaTeAdd functionality to your Renegade. Fits RT25 and RT30 winches.

renegade 2012 with 800 or 1000 engine715000927 |

DrIFT CuTTerHelp keep snow in the plow. Designed with a rear pivot point. Works with both Straight and One Way State blades.

Right Fits alpine Super Duty plow715000218 Left Fits alpine Super Duty plow715000217

pLOw LIghTSFeaturing 35W H3 halogen bulbs and a lens design that achieves 110-degree beam spread to provide excellent lighting for plowing.

Outlander (except 2012 with 800 or 1 000 engine) | 715000063

aLpINe Super DuTY puLLeY KITPulley kit to be used in conjunction with the winch when using a snow plow. Recommended to increase winch efficiency. To be used with the XT Front Bumper.

Fits alpine Super Duty plow 715000279 |

aLpINe SYNTheTIC wINCh CaBLe FOr pLOwEspecially designed for plowing applications. 8’ (2.4 m) section of durable, extra-strong synthetic rope. Stands up to repeated, sharp angle pulls used to lift heavy plow blades. Temporarily replace your winch rope for plow season to save wear and tear on wire rope.

Fits alpine Super Duty plow & alpine Flex plow715000540 |

pLOw mOuNTINg KITSMounting plate precision-designed to stay on year round without compromising ground clearance. Fits with Alpine Super Duty & Alpine Flex Push Frames (715001182, 715001474, 715001467 & 715001472).

Outlander 2006-2011 & renegade 2007-2009 | 715001412 |

Mounting plate precision-designed to stay on year round without compromising ground clearance. Required to install Alpine Super Duty Push Frames (715001182, 715001474) or Alpine Flex Plow Push Frames (715001467, 715001472). Fits with or without Can-Am Skid Plates.

Outlander and renegade 2012 715001411 |

pLOw mOuNTINg KITQuick release pins attach and detach plow blade and base assembly in minutes. Can be used with or without Alpine Super Duty Quick Attach System (715000731). Simplified installation. No frame drilling required.

renegade 2010-2011 & Outlander X xc 2011715001206 | Black | Outlander 400 2004-2005715000586 | Traxter & Quest | 715000258

OpTIONaL FeaTureS

aLpINe FLeX pLOw eDge marKerSFor a more accurate view of the width of your plow so you avoid damaging your curb, your car or your house. Fits Alpine Flex Plow 60” (715001181).


aLpINe FLeX DrIFT CuTTerKeeps snow securely in the plow. Works with plastic plow. Fits on either left or right side. Sold individually. Fits Alpine Flex Plow 60” (715001181).


aLpINe FLeX 8” pLOw eXTeNSIONSThese conveniently extend your Alpine Flex Plow to 68’’. Fits Alpine Flex Plow 60” (715001181).


aLpINe FLeX pLOw ruBBer FLap(Not illustrated) Keeps snow away from the driver. Minimizes snow flowing over plow. Increases snow rolling effect. Fits Alpine Flex Plow 60” (715001181).


aLpINe FLeX 60’’ wear BLaDe (STeeL)Long-lasting wear blade that provides a sharper cut. For use with the Alpine Flex Plow 60” (715001181). Replaces stock wear blade.


aLpINe FLeX 60’’ wear BLaDe (pLaSTIC)Flexible UHMW plastic construction won’t scratch your driveway. For use with the Alpine Flex Plow 60” (715001181). Replaces stock wear blade.


mOuNTINg KITS Choose the Plow Mounting Kit that fits your vehicle./


par

TS &

aC

CeS

SO

rIeS

• pLO

wS

& w

INC

heS

DEEP BLACKB-160

WHITE

DESCRIPTION: CAN-AM BRP LICENSE PLATE

LORA DI FABIO. SEPT.26, 2006

hOOK hOLDerAn easy way to carry your tools, firearm or bow over any terrain with confidence. Swivels to allow various mounting positions for multiple applications. Allen wrench is included for easy installation to your tubular rack.

Single 715000042 | Black | Double 715000043 | Black |

haND heLD LIghTHigh-intensity rubber spotlight comes standard with a one-inch diameter double ball and socket system. Designed to withstand more than 50 g of shock. Can be easily moved from your handlebar, rack or any other location you choose. Plugs into 12V DC outlet.

715000007 | Black |

Cup hOLDerMounts easily to handlebars or racks.

715000121 |

Brp CaN-am VaNITY pLaTe484800455 |

TIe-DOwNOur 100% polyester ratchet-style tie-down measures 10’ (3 m) in lenght and ensures a safe load with its unique soft loop strap design.

715000276 | Black |

mIrrOrTrue vision surface. Matte finish. Stem includes 3/8” (10 mm) thread. Bracket (715000190) is required for installation on an Outlander without windshield.

Right 5/16” (8 mm) 709400407 | Right 3/8” (10 mm) 709400523 | Left 3/8” (10 mm) 709400406 |

FLagMake sure everyone knows what you’re riding. Perfect for the dunes and new riders. 8-foot (2.4 m) length. Includes flag mount (715000127).

715000277 | Yellow |

FLag mOuNT715000127 |

Set of 2. 2” x 6” (5 cm x 15 cm). 704901480 |

9 per sheet. 24” x 8” (60 cm x 20 cm). 704901481 |

12” x 4” (30 cm x 10 cm). 704901482 |

6” x 12 3/4” (15 cm x 32 cm). 704901483 |

6” x 12 3/4” (15 cm x 32 cm). 704901484 |

SYNTheTIC wINCh CaBLeEasier to manipulate than steel cable. Replaces the original cable on any factory installed Warn winch or sold as an accessory by BRP. Kit includes synthetic rope and rock guard sleeve. Always use with roller fairlead (715000011) to prevent premature wear.

50’ (15 m) long. 3,000 lbs (1,361 kg) of strength. 715000539 | For XT15 winch only. 40’ (12 m) long. 1,500 lbs (680 kg) of strength. 715000593 |

wINCh aCCeSSOrIeS KITGet the most out of your winch. Double your pulling power, change your pulling direction and keep your winch in proper working order. Includes tree straps, snatch block and shackle.

715000005 |

wIre rOpe repLaCemeNTPlay it safe. Always carry a replacement wire rope. 50’ (15 m) aircraft grade steel wire. 3/16” (5 mm) diameter. 3,000 lbs (1,1361 kg) of strength.

all warn winches | 715000047 |

wIreD remOTe CONTrOL(Not illustrated) This kit allows the winch owners to add the hand-held remote to their winch. Works in conjunction with the mini-rocker switch.

715000197 |

wIreLeSS remOTe CONTrOLThe system is quick and easy to install, thanks to a wiring harness with an integrated antenna, and all necessary mounting hardware. The system allows you to operate your winch from anywhere within a 50’ (15 m) radius, increasing your recovery options. All components are weatherproof. Works with all Outlander XT, Traxter/Quest XT MY 2004 and up and BRP accessory winches with a handlebar mounted mini-rocker switch.

715000544 |

rear TIre ChaINImprove your traction in mud and snow. Sold in pairs.

26” x 10” x 12” 715500218 | 25” x 10” x 12” 715000225 |

wINCh FaIrLeaD BraCKeTAllows for more winch cable clearance when using XT-style bumpers.

Outlander XT, maX XT except 2012 with 800 or 1000 engine | 715000696 |

hOOK wITh SaFeTY LaTCh STrap KITHeavy-duty winch-rope hook with stainless steel snap. Includes a nylon safety strap.

715000069 |

rOLLer FaIrLeaDFeatures top, bottom and side rollers for less cable wear and smoother operation from any direction for easier winching.

715000011 | Black |

DeCaLS


parTS & aCCeSSOrIeS • wINCheS aCCeSSOrIeS & m

uLTI-FIT

CargO BOX STOrage NeT Designed to hook to the cargo box. Ideal for retaining various items in place. (715001370 see p.86).

guN BOOT† 6.0 ImpaCT† BY KOLpIN†

Features largest interior room of all Kolpin Gun Boot cases. Easily fits firearms up to 51” in total length. Hatchback design allows easy access. (715001419 see p.84).

Super DuTY pLOw Heavy-duty 12 gauge steel blade with integrated reinforcement for maximum durability. (715001140A see p.88).

78 Underbelly Protection79 Bumpers & Body Protection81 Windshields82 Roofs & Mirrors83 Lights84 Can-Am Accessories

by Kolpin86 Storage Gear

& Rear Windows88 Plow89 Rims90 Winch & Hitches91 Covers

& Electrical Accessories

rT40 wINCh KITCapable of 4 000 lbs pulling strenght.

rear wINDOw NeT Sharp look, easy installation.

FrONT aCCeSSOrY Bar Allows installation of front rack and front bumper lights (sold separately).

gear raILStationary rail system specially designed for your side-by-side vehicle. Multiple mounting options for the new Can-Am accessories by Kolpin line-up like the Gear Grips, Fuel Packs, Gun Boot 6.0 Impact and more.

BumperS Delivers additional protection and agressive look.

SpOrT rOOF Ultimate protection, style and integration. Easy to install and remove.

haLF wINDShIeLD Designed for protection from wind and debris as well as optical clarity while riding. Quick-attach brackets for easy and tool-less installation

uNDerBeLLY prOTeCTION Aluminum plates that provide essential protection.

LIghTSA wide range of lighting system can be integrated on your Commander to provide you with incomparable long range illumination: HID Lights, Halogen Lights.

cOmmANDER SSV


par

TS &

aC

CeS

SO

rIeS

• CO

mm

aN

Der

SS

V

74 75

FOX perFOrmaNCe FrONT ShOCKSFox Piggyback racing shocks. Includes rebound and high/low speed compression adjustments. Sold in pairs. Standard on X model.

Commander 2011 and up (all models)715001022 |

FOX perFOrmaNCe rear ShOCKSFox 2.0 Position Sensitive racing shocks. Includes rebound and high/low speed compression adjustments. Sold in pairs. Standard on X model.


FrONT ShOCK COVerSOffer added protection in rough terrain and weather conditions. Can-Am branded. Sold in pairs.

Commander 2011 and up (all models) 715001324 |

FrONT SKID pLaTeDraw-formed 5052-H32 aluminum front skid plate provides essential protection. 3/16” thick for durability and strength. Engraved Can-Am logo.


a-arm prOTeCTOrS5052-H32 aluminum A-arm plates and plastic deflectors provide essential protection and aggressive look. 3/16” thick for durability and strength. Engraved Can-Am logo. Sold in pairs.


LaTeraL SKID pLaTeSDraw-formed 5052-H32 aluminum lateral skid plates provide essential protection. 3/16” thick for durability and strength. Engraved Can-Am logo. Sold in pairs.


CeNTraL SKID pLaTe5052-H32 aluminum, 3/16” thick. Pre-cut holes for fluid and mud drainage, and servicing access. Engraved Can-Am logo. Direct replacement of factory installed plastic skid.


rear SKID pLaTe5052-H32 aluminum, 3/16” thick. Provides additional protection to rear end of vehicle. Engraved Can-Am logo. Direct replacement of factory installed plastic skid.


TraILINg arm prOTeCTOrS5052-H32 aluminum trailing arm plates and plastic deflectors provide essential protection. 3/16” thick for durability and strength. Sold in pairs.




aIr INTaKe pre-FILTerAdd extra protection to your engine in harsh riding conditions. Filter blocks particles larger than 0.005”.


OFF-rOaD XTreme FrONT BumperDelivers additional heavy-duty protection that works with or without the front XT bumper. Textured black electrocoated for durability and rugged style. Can-Am logo tag. Does not fit with Signalling Kit (715001308). Not offered on EC homologated vehicles.


FrONT XT BumperMade of heavy gauge steel for additional protection. XT styled for matching appearance. Textured black electrocoated for durability and ruggged style. Effortless mounting. Standard on X, XT and LTD models.

Commander 2011 and up (all models) | 715000958 |

FrONT raCKDurable finish for scratch-resistant performance. Equipped with genuine Can-Am clamps for easy mounting on required XT Bumper or Front Accessory Bar (sold seperately). Allows access to air filter or cooling. 75 lbs load capacity.


FrONT LIghT prOTeCTIONWorks in conjuction with XT bumper, offering protection to front headlights and sporting aggressive look. Textured black electrocoated for durable finish and rugged style. Integrated Can-Am fastening system provides efficient mounting vs traditional P-clamps.


raDIaTOr prOTeCTOrBlack epoxy electrocoated metal shield that mounts over radiator face to provide protection from stones and branches.

Commander 2011 and up (all models) | 715001126 | Black |


par

TS &

aC

CeS

SO

rIeS

• CO

mm

aN

Der

SS

V

76

LOwer TaILgaTe prOTeCTOrAluminum body plating covering lower tailgate provides additional protection and aggressive look.


XT muDguarDSDeliver aggressive look while providing added protection from dirt and debris. Includes front and rear extensions and all mounting hardware. Standard on XT and LTD models.


rear BumperIntegrated tubular system provides sporty look while protecting vehicle’s bodywork. Flips with cargo box and lower tailgate.


XT BOX raILSAdd integrated tie down area to your cargo box while enhancing the look. Textured black finish. Standard on XT and LTD models.

Commander 2011 and up (all models) | 715000957

rOCK SLIDer(Not illustrated) Protects vehicle’s sides and undercarriage against large obstacles. Textured black electrocoated for durability. Standard on Commander X model.


haLF wINDShIeLDDesigned for protection from wind and debris as well as optical clarity. This rugged, durable polycarbonate construction offers better impact resistance than acrylic windshields. Features reverse angle lip to deflect air flow. Non yellowing, non crazing, non cracking and UV resistant properties. Quick-attach brackets procure fast, easy and tool-less installation and removal. Standard on LTD model.


FuLL wINDShIeLD harDCOaTeDCombines the utmost in protection from the elements with optical clarity while riding. Hardcoated (both sides) polycarbonate material offers better impact and abrasion resistance, as well as prolonged protection against wear-and-tear for longer “like new” look than acrylic windshields. Non yellowing, non crazing, non cracking and UV resistant properties. Quick-attach brackets procure fast, easy and tool-less installation and removal.


FuLL wINDShIeLDDesigned for optical clarity and better impact resistance than acrylic windshields thanks to durable polycarbonate construction. Non yellowing, non crazing, non cracking and UV resistant properties. Quick-attach brackets procure fast, easy and tool-less installation and removal.


ALLOWS TO OPEN LOWER TAILGATE


par

TS &

aC

CeS

SO

rIeS

• CO

mm

aN

Der

SS

V

hID LIghTSIncomparable and powerful HID long range illumination plug-and-play system converts night usage into virtually daytime riding. Integrated ballast unit with 3.25” clear glass lens and swivel mounting heavy-duty bracket provides compact design. Water and dust proof IP67 and IP6K9K. Highest electromagnetic compatibility rating, i.e. EMC Class. according to CISPR 25, for total disturbance-free electronic operation. Peak light performance with just 35W. Luminous flux is 2.5 times higher than conventional halogen bulb with 35% less energy consumption. High vibration resistance with longer lifetime than halogen bulb. Constant light intensity even under unsteady power supply voltage. Includes basic wiring and switch. Works in conjunction with halogen and/or HID lights separately or in combination without overloading your charging system. To install on Sport Visor: Must be used with Light Rack for Sport Visor (715000910) and Sport Visor (715000762). Roof accessories and Light Wiring Kit (715000987) is required to install the HID lights. Sold in pack of 2.


To install on Front accessory Bar or XT Bumper: Light Mount Kit (715001366) is required to install the HID lights. Can be installed on the Front Accessory Bar (715001377) or on the XT Front Bumper (715000958). Sold in pack of 2.


haLOgeN LIghTSDelivers long range illumination with 3.25” clear glass lens and swivel mounting heavy-duty bracket provides compact design. Includes basic wiring and switch. Works in conjuction with halogen and/or HID lights separately or in combination without overloading your charging system. To install on Sport Visor: Must be used with Light Rack for Sport Visor (715000910) and Sport Visor (715000762). Roof accessories and Light Wiring Kit (715000987) is required to install the halogen lights. Sold in pack of 2.


To install on Front accessory Bar, XT Bumper or Xtreme Bumper: Light Mount Kit (715001366) is required to install the halogen lights. Can be installed on the Front Accessory Bar (715001377), the XT Front Bumper (715000958) or Xtreme Bumper (715000951). Sold in pack of 2.


LIghT raCK FOr SpOrT VISOrProvides Commander side-by-side vehicle with. custom look. Made of rugged aluminum with a light anodized finish. Essential protection for your accessory lighting systems. Works in conjunction with halogen and/or HID lights separately or in combination without overloading your charging system. Fully integrated. Sport Visor (715000762) is required for installation of the light rack. Lights sold separately.


rOOF aCCeSSOrIeS aND LIghT wIrINg KITAll the necessary hardware, wires, fuses and relay to power your roof lighting for a clean well routed look. Includes additional output for future roof accessories.


SIgNaLLINg KITComplete flasher, horn and illuminated license plate holder. Integrates onto vehicle. Not for road use. Does not fit with the Off-Road Xtreme Front Bumper (715000951).


LIghT mOuNT KITEffortless installation and integrated dash switch convenience thanks to Can-Am casted clamps that facilitate light mounting and all the necessary wiring. Requires HID lights (715001382 sold separately) or Halogen lights (715001383 sold separately). Delivers numerous light installation options.


ram SpOTLIghTHigh-intensity (37.5 watts), heavy-duty spotlight standard-equipped with 1” diameter rubber-coated double ball and socket system. Can be easily moved from your XT box rails to any other location. Cargo Box 12-V Power Outlet (715001321) required for cargo box mounting.

Commander 2012 (all models) | 715000007 | Black |

DeLuXe CONVerTIBLe rOOFUltimate in protection, style and integration. Twinsheet HDPE manufacturing delivers premium look, and complete coverage when combined with Sport Visor. Quick-attach bracket procures fast, easy and tool-less installation and removal.

Commander 2011 and up (all models)715001478 | Black (Standard on LTD model) 715001479 | Yellow

SpOrT VISOrAggressive designed, twinsheet HDPE sport visor complete with integrated driver and passenger inner storage pockets. Required for installation of Can-Am light rack system. Complete with integrated light switch knock outs. Creates full roof for maximum element protection when combined with the Deluxe Convertible Roof middle section. Easy installation. Can be used in conjunction with any windshield. Standard on LTD model.


paNOramIC CeNTer mIrrOrConvex mirror for wide angle visibility. Can be used with or without roof and windshields. Light switches not included. Sport Visor sold separately.


rearVIew mIrrOrCar-type mirror. Can be used with or without roof and windshields.


SpOrT rOOFEconomy roof for protection against the elements. Thermoformed TPO construction. Not compatible with Light Rack.


SIDe mIrrOrSIncludes clamp for installation on roll cage.

RH Commander 2011 and up (all models) | 715001418 | Black | LH Commander 2011 and up (all models) | 715001192 | Black |

FrONT aCCeSSOrY BarTextured black electrocoated for durability and rugged style. Can-Am casted clamps for easy mounting. Allows installation of front rack and HID or halogen lights (sold separately). Not compatible with XT Front Bumper.

Commander 2011 and up (base model) | 715001377 | Black |


par

TS &

aC

CeS

SO

rIeS

• CO

mm

aN

Der

SS

V

81

rear wIND SCreeNFull rear mesh coverage reduces backdraft when windshield is installed. Mounts to roll bar. White Cam-Am logo on black mesh. Standard on LTD model.


rear wINDOw NeTNet designed to look sharp. Install in a snap. 2” Velcro straps. Mounts to roll bar. White Can-Am logo.


LOCK FOr TaILgaTeDevice locks lower tailgate. Includes key.


LOCKaBLe gaS CapProtects your fuel. Meets latest EPA requirements.


XT SpOrT STeerINg wheeLPolyurethane soft-touch black grip highlighted with silver spokes. Standard on XT and LTD models.


wOrK KeYKey limits vehicle speed to 25 mph for use on construction sites.


LICeNSe pLaTe hOLDerSupports your license plate.


guN BOOT 6.0 ImpaCT BY KOLpINFeatures largest interior room of all Kolpin Gun Boot cases. Extra room for pistol-grip-type weapons and small bipods. Easily fits firearms up to 51” in total length. Provides ample room for 60mm scopes. Hatchback design allows easy access. Snap-close cover with locking capability. Ergonomically designed handle and molded attachment points for sling. Designed to accomodate left and right hand bolt-action rifles and shotguns. Includes removable, shock absorbing foam and nylon. Impact liner for superior interior protection. Requires Gun Boot Mount by Kolpin (715001420) for installation. Compatible for dual mount with Additional Gun Boot Mount (715001586).


guN BOOT mOuNT BY KOLpINFits (1) Kolpin Gun Boot Impact 6.0 (715001419). Lightweight and extremely durable. Easily adjustable without the use of any tools. Offers precision gun angle adjustability. Compatible with Gear Rail Holder (715001320).

Commander 2011 and up (all models) | 715001420Black |

gear raILStationary rail system specially designed for your side-by-side vehicle. Mounts on roll bar behind driver and passenger. Universal mounting options for many Kolpin accessories like Gear Grips, Fuel Packs, Gun Boot 6.0 Gun Boot Mount. Rail is made with heavy-duty 7-gauge extruded anodized black aluminum. Includes one versatile Gear Rail Mount (715001422).


FueL paCK BraCKeT BY KOLpINEasy, quick and secure bracket for your fuel pack that leaves plenty of room for your other gear. 1/4-turn-action knob allows quick and easy removal of fuel pack from bracket. Perfect match with the 1.5 US Gallon Fuel Pack Jr. (715001425). Mount the 4 US Gallon Fuel Pack (715001424) with the use of. Fuel Pack Brackets.

Commander 2011 and up (all models) | 715001427 | Black

uNIVerSaL Saw preSS BY KOLpINSpecially crafted for transporting your chainsaw securely and safely aboard your side-by-side vehicle. Heavy-duty, black powder-coated metal bracket designed to attach any chainsaw model with up to a 20” (51 cm) bar. Rubber pads provide cushion and tight fit. Hinged design for quick removal. Holds saw in vertical position or 45˚ angle in either direction. Requires appropriate mounting kit for installation. Fits with Gear Rail (715001320). Protective sheath included.


gear raIL mOuNT BY KOLpINAccessory bracket for mounting additional accessories to the Gear Rail (715001320). Includes C clamp and metal mounting brackets.


gear grIpS BY KOLpINDurable, flexible grips cushion and protect while providing a custom fit for a variety of items from 1 to 4 inches (2.5 cm to 10 cm) in diameter. Heavy-duty design for carrying bows, fishing poles, rakes, farm tools and more. Quick-release button opens grip quickly for easy access to gear. Heavy-duty base system built for the toughest adventures. Sold in pairs.


4 gaLLON FueL paCK BY KOLpINFuel container built tough to facilitate longer rides. Mounts on Commander, garage wall, camper, etc. Made of puncture-resistant, crush-proof, high-density polyethylene. Self-venting and self-closing spout is CARB and CPSC compliant for spill-proof operation. Molded handle for easy carriage and filling. Compatible with Gear Rail (715001320) for easy and convenient attachment to your Commander. Mounting options include Gear Rail Mount (715001422) and Fuel Pack Bracket* (715001427). Legal in all 50 States. CARB compliant and EPA certified. Dimensions: 34 1/2” x 3” x 13 1/4” H. *Attachment systems are not CE approved to attach fuel carrying items.


1.5 uS gaLLON FueL paCK jr BY KOLpINFuel container built tough to facilitate longer rides. Mounts on Commander, garage wall, camper, etc. Made of puncture resistant, crush proof, high density polyethylene. Self-venting and self-closing spout is CARB and CPSC compliant for spill-proof operation. Molded handle for easy carriage and filling. Compatible with Gear Rail (715001320) for easy and convenient attachment to your Commander. Mounting options include Gear Rail Mount (715001422) and Fuel Pack Bracket* (715001427). Legal in all 50 States. CARB compliant and EPA certified. Dimensions: 11 1/2” x 4 1/2” x 12” H. *Attachment systems are not CE approved to attach fuel carrying items.


Can-Am exclusive


par

TS &

aC

CeS

SO

rIeS

• CO

mm

aN

Der

SS

V

CargO BagRugged all-purpose cargo bag with rain cover for additional protection against the elements. Fits snuggly inside lower cargo box.


CargO BOX NeTSolid net designed to hook to the bottom of the cargo box for secure and compact confinement of your cargo. Can-Am branded.


CargO BOX eLaSTIC NeTElastic net designed to hook to the bottom of the cargo box. Ideal for retaining lighter, irregular-shaped items.


CargO BOX STOrage NeTMesh net. Stores items vertically. Quick installation.


TONNeau COVerFitted to cover all of the items in your cargo box thoroughly. Prevents splash from entering the cargo box. Easily removable for quick access. Fits with or without XT Box Rails.

Commander 2011 and up (all models) 715001194 | Black |

SOFT rear wINDOwClear soft window made from see-through vinyl with cold cracking resistance to temperatures down to -20°C. Prevents dust and rain from drafting back into the vehicle in harsh riding environments. Quick installation with 2” Velcro straps. White Can-Am logo.


LTD 14” rImPremium cast aluminum rim. Sold individually. Standard on Commander Limited.

FrontCommander 2011 and up (all models) 705401098 | Silver/Black | RearCommander 2011 and up (all models)705501471 | Silver/Black |

X rImCenter cast aluminum rims. Welded exterior and interior reinforcement rings. Needs to be installed with Beadlock (705400841).

FrontCommander 2011 and up (all models)705400945 | Black | RearCommander 2011 and up (all models) 705501137 | Black |

X BeaDLOCKCast aluminum. Must be installed on rims 705501137 and 705400945. Needs bolts (250000435) for installing the Beadlock Disk.

Commander 2011 and up (all models) 705400841 | Yellow |

XT 14” rImPremium cast aluminum rim. Sold individually. Standard on XT models.

Commander 2011 and up (all models) Front705400632 | Silver | Rear705500965 | Silver |

Premium cast aluminum rim with durable black finish. Sold individually. Standard on XT Camo models.

Commander 2011 and up (all models) Front705400919 | Black | Rear705501261 | Black |


par

TS &

aC

CeS

SO

rIeS

• CO

mm

aN

Der

SS

V

Super DuTY pLOwHeavy-duty 12 gauge steel blade with integrated reinforcement for maximum durability. Complete plow system with manual lifting and angling. Heavy-duty push tubes withstand the roughest uses. Requires a winch for raising and lowering. Easy to install. Quick disconnect system for fast installation and removal. Front mount system provides a minimum of 11” of lift. Front mount included.

Commander 2011 and up (all models) | 715001140A |

pLOw eDge marKerSFor a more accurate view of the width of your plow. Allows you to work closely around objects.


pLOw BLaDe eXTeNSIONSSide extensions for widening your plow blade by 6” (15 cm) on each side. Includes rubber flap for extention parts. Sold in pairs.

Commander 2011 and up (all models)715001217 | Black |

pLOw DrIFT CuTTerKeeps snow securely in the plow. Allows you to cut a cleaner pass. Sold individually.

Commander 2011 and up (all models) 715001218 | Black |

pLOw ruBBer FLapKeeps snow away from the driver and helps snow to roll in front of the plow.


warN pLOw rOLLer FaIrLeaDLarger diameter lower roller reduces wear on wire rope for plow application.


TraILerINg aND STOrage COVerCan-Am branded 300-denier solution-dyed, water repellent polyester construction. Fits with or without roof, light rack, front rack, light protector, rear bumper, extreme bumper, side mirrors. Has trap for fuel, access to cargo box and passenger area. Heavy-duty cord around bottom for secure fit. Features soft material in the windshield area to prevent scratches while trailering.


heaTeD VISOr OuTLeTOptional visor outlet for your Commander that delivers fog-free riding. Quick and easy installation. Sold individually. Heated visor not included.


raDIO/gpS CONSOLe aDapTOrUpdate center console for GPS and/or audio system integration. Commander-styled for matching appearance. Includes a cover for unused GPS or audio system slot. Standard on LTD model.


COmpLeTe auDIO SYSTemThis integrated Jensen wired remote, amplifier/receiver and speaker combination provides durability and convenience of installation. The waterproof design and UV resistant materials mean no matter how extreme your riding, this unit will follow you through. LED illumination makes this unit easy to use and easy to see. You can select between AM/FM tuner, 7-channel weather band and it’s IPod, USB 2.0, MP3, WMA ready to kick out all your favorites from its front and rear speakers. Top it off with plug and play installation and there is no easier choice to make when it comes to riding entertainment. 50Wx4, -10°C to 60°C operating range. Order Radio/GPS Console Adaptor (715001404). Standard on LTD model.


FrONT & rear SpeaKerSComplete your system with this pair of outdoor speakers. Kit includes black speaker boxes and plug and play wiring to match up with Remote/Amplifier (715001313).

Front 5.25” outdoor speakersCommander 2011 and up (all models)715001309 | Rear 6.5” outdoor speakers Commander 2011 and up (all models)715001315 |

raDIO wITh ampLIFIer(Not illustrated) Designed for outdoor use this wired remote and amplifier combo are ready to install in your Commander. Plug and play wiring, will have you listening to AM/FM tuner, 7-channel weather band or IPod, USB 2.0, MP3, WMA media in no time. Rugged construction ensures longevity. 50Wx4, -10°C to 60°C operating range. Order Radio/GPS Console Adaptor (715001404).


garmIN† mONTaNa† 650T gpSBright 4” sunlight readable, 65K Color TFT, touchscreen color display (272 X 480 pixels). High sensitivity, WAAS-enabled GPS receiver and Hotfix†. Wirelessly, share with your friends, routes, tracks, way points and geocaches between units. Worldwide built-in basemap with shaded relief pre-loaded US or Europe topo. 3-axis compass and barometric altimeter. MicroSD† card slot for optionnal mapping. 5 Mega pixels autofocus digital camera with automatic geo-tagging. 3.5 mm audio jack. High speed use USB and serial interface. Rugged, waterproof (IEC 60529 IPX7). Multiple battery options: user replaceable 3AA (up to 22 hours) or rechargeable lithium (up to 16 hours). Includes mount for use with Radio/GPS Console Adaptor (715001404). Standard on LTD model.

Commander 2011 and up (all models)715001361 | european version | 715001406 |

STOrage COVer100-denier solution-dyed, water-repellent polyester construction. Heavy-duty elastic cord around bottom and polypropylene webbing across bottom for secure fit. Fits with or without most accessories.

Commander 2011 and up (all models)715001368 | Black |

aNTI-pOOLINg pOLeS8 mm fiberglass poles to prevent snow or rain from accumulating on your trailer cover. Sold in pairs. Comes with nylon bag. Not for use while trailering.


CargO BOX 12-V pOwer OuTLeT12-Volt accessories outlet. Easy plug-in harness. Wiring harness included.

Commander 2012 (all models)715001321 | Black |


par

TS &

aC

CeS

SO

rIeS

• CO

mm

aN

Der

SS

V

wINCh & hITCh SuppOrT pLaTeMounting plate for Warn RT40 Warn winch kit (715000658) and front 2” receiver hitch (715000663). Standard on XT and LTD models.


FrONT 2” reCeIVer hITChCan be used with a standard 2” draw bar. Complete with integrated quick locking/release pin for easy installation and removal of draw bar. Allows for front-mount pulling/pushing or additional accessory attachments, such as a plow. Winch & hitch support plate (715000704) is required for installation.


muLTImOuNT TOw1.5” bar system, no ball. Requires multimount winch kit (715000659).


FrONT SwaY BarEnhances vehicle performance and control during hard cornering. Standard on X model.


muLTImOuNT wINCh KITFor use with RT40 Warn winch kit (715000658). Versatile system that can be easily mounted at the front or rear of the Can-Am Commander side-by-side vehicle. Complete with Can-Am plug-and-play front and rear wire harness. Ergonomically formed handle makes it easy to carry from front to rear. Front 2” receiver hitch (715000663) is required for installation. Integrated receiver allows for use with multimount tow (715001142), not included.


SYNTheTIC wINCh CaBLe50 feet of 7/32” synthetic cable for RT40 Warn winch. NOTE: Replacing a wire rope with synthetic cable also requires changing the fairlead to avoid damage and wear to the new synthetic cable from the rough surface of the old fairlead.


SYNTheTIC CaBLe eXTeNSIONLightweight 1/4” diameter, easy to handle and won’t rattle in cargo box. Easily attaches to winch cable to provide additional 50’ of distance. 4000 lbs single line capacity.


wIre rOpe repLaCemeNT55 feet of 7/32” wire rope for RT40 Warn winch.


rOLLer FaIrLeaDSuggested when changing the wire-rope. Heavy-duty replacement fairlead for RT40 Warn winch.


rT40 warN wINCh KITFully-sealed, capable of 4,000 lbs pulling strength. Includes 1.5hp motor, 55 feet of 7/32” wire rope, ergonomically designed clutch knob, mechanical brake, hand-held remote and integrated dash switch, waterproof contactor and roller fairlead. CE certified. Standard on LTD and XT models.



par

TS &

aC

CeS

SO

rIeS

• CO

mm

aN

Der

SS

V

89

For additional information or to purchase these items, please

contact your nearest BRP dealer.

CaN-am X-Team hITCh pLugGives trucks, SUVs custom finished look. Keeps dirt, snow and other debris out of the receiver. Fits 2” (5 cm) receivers.

4849510086

CaN-am X-Team rear wINDOw SKINGreat looking rear window skin. Provides shade from the sun to help keep interior temps low. Clear view from the inside looking out. Trim to fit almost any vehicle. Non-permanent adhesive for easy removal.

4849110086

CaN-am LICeNSe pLaTeMade of stainless steel with mirror finish. Raised letters to give 3D look. Thicker and more durable. Universal to fit all vehicles.

4849610008

CaN-am muD FLapSKeep dirt and mud off trucks, SUVs. Reduce damage from rock chips and other road debris. Fit most trucks and SUVs. Quick and easy installation. Sold in pairs.

4849410086

TruCK & Car aCCeSSOrIeS

CaN-am LapTOp BaCKpaCKTwo main compartments. Yoke style shoulder straps. Fits most 17” laptops. Built-in audio pocket with headphone pass-through. 24” H x 14” W X 7” D (60 cm x 36 cm x 18 cm)

CA09A10090

CaN-am muLTI-TOOL High-Sierra† 15-function multi-tool. Includes can and bottle opener, phillips head screw driver, 3 driver bits (2 - 4 mm), 3 blades (3 - 5 mm), serrated blade, pliers, needle nose pliers, wire cutter and dual-function file.

CA08A60090

CaN-am parKINg SIgN 12” X 18” (30 cm x 46 cm) made of aluminum. Round corners and two holes for hanging.

CA11A10010

CaN-am KeY ChaIN PVC key chain. 1 sided design.

CA08A30010

CaN-am BISTrO COFFee mug 22 oz. (638 ml) ceramic coffee mug.CA10A90001

CaN-am LeD FLaShLIghT Compact flashlight. Includes 9 super bright LED lights that never need replacement (approximately 30 lumens). Rubberized body for sure grip. Provides up to 16 hours of continuous light on one set of batteries. Lanyard for easy carrying. 3 AAA batteries included.

CA10A50090

CaN-am STaINLeSS STeeL TraVeL mug 16 oz. (480 ml). Exclusive carbon fiber design. Low-profile stainless steel lid with plastic thumb-slide closure. 18/8 stainless steel double-wall construction. Rubberized skid-proof bottom. Fits all standard car cup holders & new Deluxe Fairing for Outlander 2012.

CA10A30008

OFFICIaL LICeNSeD prODuCTS

powertex, the Brp official

licensed product supplier

offers a much wider range of

products to choose from as

shown in this catalogue.

all these fantastic products

are all year round possible

to order by going on the

website www.shop-brp.com

please take notice of the

following 5 steps to order

your licensed products:

The powertex group is available from monday through Friday

+1 715 717 9125, from 2pm to 8pm CeT.

Your customer support contact can also assist you with your questions.

1. Place your order at www.shop-brp.com for gifts, novelties, dealer custom clothing and caps all year round. The website is available in English and French.

2. Create your dealer account. Go to the website, click on the dealer account link in the upper right corner. You will be asked to enter some dealer information and enter your location – please select international. Finally you will be asked to set up your e-mail account, select and confirm a password.

3. Start placing your order once you are registered. All pricing displayed in the webshop are not including shipping, handling and duties. once you have finalized your order, a confirmation of the order will be sent within 48-72hrs including the cost of your freight and duties (depending on your region). Fees of shipping, handling, duties and taxes are the responsibility of the buyer – all orders are drop shipments and serviced by uPS or FedEx.

4. Payments for international customers must be made via a valid credit card (viSA, Mastercard,…) or PayPal. once you have confirmed your order, you will be transferred to the payment section.

5. Goods delivery will take place once the payment has been accepted and the shipment will take place immediate.

OFFICIaL LICeNSeD prODuCTS

5 eaSY STepS TO OrDer Brp LICeNSeD prODuCTS:

further questions?


parTS

XpS CLeaNerS

XpS mICrOFIBer TOweLSThe latest in high-quality detailing towels. Made up of extremely fine fibers, their soft surfaces have been perfected for drying and polishing motorcycles, boats, cars or any shiny finish. They are so absorbent they hold up to seven times their weight in water. Machine washable means they can be used over and over again. Pack of 2.

219701759 |

XpS CLeaNINg KITKit includes: XPS off-road vehicle Wash, XPS Finishing Spray and XPS Microfiber Towels.

219701713 |

XpS OFF-rOaD VehICLe waShA biodegradable and non-toxic cleaner that removes mud and dried-on dirt from your off-road vehicle. Whether grimy from the track, the woods or the fields, this cleaner will leave your off-road vehicle sparkling. When used as directed, XPS Wash is safe for all off-road vehicles finishes. 32 oz. / 946 ml.

219701702 |

XpS FINIShINg SpraYThe final touch to your detailing job. Uses an advanced silicone product. Melon-scented spray quickly treats faded plastics, vinyl, rubber and more to restore their original look. Long lasting, it helps keep mud and dirt from sticking to your vehicle’s finish and does not leave streaks or spots. Contains no ozone depleters and no chlorinated solvents. 12 oz. / 340 g.

219701704 |

XpS BraKeS & parTS CLeaNerA concentrated blend of solvents with a powerful blasting spray that effectively removes grease, grime, brake fluid and other contaminants from brake components and metal part without the need for disassembly. Evaporates instantly and completely leaving no residue to hinder performance. Contains no ozone depleters. 14 oz. / 397 g.

219701705 |

perFOrmaNCe DrIVe BeLTHigh Performance drive belts calibrated to maximize your off-road performance. Ask your Authorized Can-Am Dealer which one fits your vehicle.

715000302 | 715900024 | 715900023 |

BraKe paD KITOne-stop replacement brake pad kit designed to replace the parts while keeping your ATV’s performance intact. Ask your Authorized Can-Am Dealer which one fits your vehicle.

705600349 705600350

gOrILLa SILVerBaCK muD TIreFits front & rear. 30” x 14” (76 cm x 35 cm).

705400962

CarLISLe TIreThe complete collection of Carlisle tires for Can-Am ATV’s under one roof. See your nearest Can-Am Authorized Dealer for all the Can-Am off-road tires that fit your vehicle.

Front 705400431 | Rear 705500606 |

NgK† SparK pLugSBRP dealers carry the full line of premium NGK spark plugs for Can-Am ATVs.

707000246 |

YuaSa BaTTerIeSTop of the line models from the leading preferred original equipment battery supplier in North America.

18 Amps. Wet (YTX20L-BS) | 410301203 | 19 Amps. Dry (YB16CL-B) | 278001756 | 13 Amps. Wet (YTX15L-BS) | 710000283 | Dry (YB30CLB) | 278001882 | 3 Amps. Wet (YT4L-BS) | 410301204 |

YuaSa† SmarT ShOT auTOmaTIC BaTTerY ChargerThe Yuasa Smart Shot automatic battery chargers are available in 900 milliamp and 1.5 amp charge capacities and ensure that optimum power is available from your battery when you need it. Both chargers are supplied with a fused-ring connector, in addition to the alligator clips that can be attached permanently to your battery, making charging and maintaining your battery a snap.

900 Automatic 12V 900MA529035773 | Automatic 6/12V 1.5 amps. 5 Stage529035772 |

mOTOCrOSS BaTTerIeSIntroducing Motocross† batteries. A complete new line-up of economical and high performance batteries. These 22 new batteries cover more than 75% of the powersports market and meet Powersports Original Equipment Specifications. They all come with a one year warranty.

YTX5L-BS w acid pack | 715900151 | YTX4L-BS w acid pack | 715900152 | YTX20L-BS w acid pack | 715900189 | YTX12-BS w acid pack | 715900190 | YB16CL-B | 715900191 | YB16B | 715900154 | YB14A-A2 | 715900192 | 12N14-3A | 715900157 |

YTX9-BS w acid pack | 715900159 | YTX7L-BS w acid pack | 715900160 | YTX7A-BS w acid pack | 715900161 | YTX14-BS w acid pack | 715900162 | YB14L-A2 | 715900163 | YB14-A2 | 715900165 | YB12C-A | 715900167 |

Y50-N18L-A3 | 715900169 | YB14A-A1 | 715900171 | YB10A-A2 | 715900173 | YB10L-A2 | 715900175 | YB12A-A | 715900177 | YB16AL-A2 | 715900179 | YB4L-B | 715900181 |

New

TheY aLL COme wITh a ONe Year warraNTY.


par

TS &

aC

CeS

SO

rIeS

• OILS

aN

D m

aIN

TeNa

NC

e

XpS eNgINe OILS & maINTeNaNCe prODuCTS

XpS DOT 4 BraKe FLuIDExceeds DOT 3 and 4 requirements. Unique low-moisture formulation providing maximum protection against vapor lock. Recommended in Ski-Doo snowmobiles and Can-Am off-road vehicles.

293600131 |

XpS FueL STaBILIzerFuel additive to protect against fuel contamination and residue build-up in carburetors and gas lines. Should always be used before storing your Can-Am off-road vehicle. Suitable for all gasoline engines.

413408601 |

pre-mIXeD aNTIFreeze/COOLaNTPre-mixed ready to top up your coolant level. Blended to perform best in our Rotax engines with anti-corrosive additive.

219700362 |

XpS SYNTheTIC SuSpeNSION greaSeSpecially designed for Can-Am off-road vehicle suspensions. Offers optimal lubrication at low and high temperature while protecting critical suspension components from dirt and other contaminants. 400 g.

293550033 |

XpS LuBeA multipurpose lubricant that prevents rust, corrosion and moisture intrusion. Contains active extreme-pressure additives which provide excellent lubrication and antiwear properties. Comes in a spray can that works upside down. 14 oz.

293600016 |

XpS STOrage OILThis specialty oil is a must when putting your Can-Am off-road vehicle away for extended periods. Specially formulated to protect the engine’s internal parts from the hazards of rust and corrosion due to condensation during storage or prolonged periods of non-use. 350 g.

413711900 |

XpS OFF-rOaD VehICLe hpg-T/ a gaS ShOCK OILRecommended for all top quality gas shocks for off-road vehicles including our own Can-Am HPG-T/A nitrogen gas charged shocks. High viscosity index for extreme temperatures encountered in off-road vehicle conditions.

293600136 |

XpS SYNTheTIC gear OILBrings forward the latest innovations of lubricant technology. Provides optimal protection under severe conditions while allowing durability that far exceeds other synthetic and conventional APl GL-5 gear oils. Offers added assurance during extended drain intervals. Allows higher load capacity when compared to petroleum lubricants. Its tremendous thermal stability and relatively constant viscosity give exceptional wear protection and superior performance at extreme temperatures. Strongly recommended for use in all Can-Am side-by-sides and ATV models requiring API GL-5 gear oil.

For SSV 75W-140 293600140 | For ATV 75W-90 293600043 |

FLeXIBLe SpOuTTo use your 1 quart / 946 ml, 1 U.S. gallon / 3.785 L oil bottles for spill-free pouring. Easy installation.

414837300 |

XpS 4-STrOKe SYNTheTIC OIL - aLL CLImaTe graDe Unlike other ordinary 4-stroke motor oils, XPS all climate grade synthetic 4-stroke oil is specifically engineered to meet the particular lubrication requirements of the Can-Am off-road vehicles equipped with Rotax 4-stroke engines. Provides easier starting in very cold temperatutes.

1 US gallon / 3.785 L 2936001151 quart / 946 ml 293600112

XpS 4-STrOKe SYNTheTIC OIL - Summer graDeBRP 4-stroke engines are high output, used in the most demanding conditions, and used aggressively they need a specialized oil to handle these demands!

1 US gallon / 3.785 L 2936001221 quart / 946 ml 293600121

NOTe: pLeaSe CONTaCT YOur NeareST DeaLer FOr SuggeSTeD reTaIL prICeS OF OIL BaSeD prODuCTS.

XpS 4-STrOKe OIL ChaNge KIT Kit includes: 3 quarts of XPS synthetic blenc oil, oil filter, o-ring and instruction sheet. For Renegade, Outlander & Commander.

Summer use 703500736

All climate 703500735


v

eNgiNeered For your roTax® eNgiNe

CoMPLETE YouR CAN-AM oFF-RoADiNG EXPERiENCE WiTH ouR LiNE oF XPS MAiNTENANCE AND CLEANiNG PRoDuCTS.

Go ALL THE WAY!

FoR THE FuLL XPS SToRY, viSiT www.xpslubricants.com

10ToP

1 All Climate synthetic base oils for Easy Starting

2 Additional corrosion Protection for wet environments and periods of extended non-use

3 Friction modifiers designed for optimal clutch performance

4 unique chemistry for Maximum anti-wear protection

5 Application specific chemistries that automotive oils do not provide

6 Extra Engine Protection for heavy loads and high RPMs

7 Smart computer oiling system controlled in interaction with the rider’s style

8 Extensive field testing on Can-Am off-road vehicles

9 Years of extensive R&D and rigorous testing with industry leading RoTAX engines

10 The perfect match: ultimate performance and durable longevity

REASoNS Why YouR ROTAX ENGiNE DESERvES XpS

/ They’ve passed the most grueling tests.

/ BRP invested millions of dollars for XPS lubricants to be specifically formulated for your 2 and 4 stroke RoTAX engines.

/ They’ve been challenged by thousands of hours on the dyno and millions of miles in real world riding conditions.

/ Don’t entrust the performance and protection of the best 2 and 4 stroke engines in powersports to anything but the lubricants engineered exactly for them.

atv-ssv catalogue emea 2012

Documents