TERMS OF SALE: CASH OR “CASHIERS” CHECK ONLY. 15% “BUYER’S” PREMIUM ON ALL PURCHASES.$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH DEPOSIT TOWARDS ALL PURCHASES. ALL SALES ARE SUBJECT TO CALIFORNIA SALES TAX. THERE WILL BE NO EXCEPTIONS.

BID LIVE OR VIA WEBCAST

`

AM

ERIC

AN

AUCTION

EERS

GROUP

AA

AMERICAN AUCTIONEERS GROUP1146 N Central Avenue #535Glendale, California 91202Phone: 818-763-2021 Fax: 818-291-9495WWW.AAGAUCTION.COM

First-Class MailPRESORTED

U.S. PostagePAID

STA CLARITA, CAPermit No. 298

AUCTION LOCATION:

STARTING @ 10:30A.M. (PST)

THURSDAY MARCH 2, 2017

PUBLIC AUCTION: MARCH 2, 2017

AUCTION DATE :

2951 E. LA PALMA AVEANAHEIM, CA. 92806

MINSTER AND BLISS STAMPING FACILITY

PUB

LIC

AU

CT

ION

Preview : Morning of sale from 8:00 am to 10:30 am

Online bidding thru bidspotter.com

PUB

LIC

AU

CT

ION

MAJOR METAL STAMPING & MACHINING FACILITY

P2 -100 & P2-150500 TON

Bliss HP2-500-84x48 500-Ton Straight Side Stamping Press w/ Bliss Controls, Data Instruments SmartPAK Wintriss Press Automation Control, AutoSetPAC, Wintriss Load Analyzer, (2) Programmable Cam Outputs, DiPRO and DSI2 Sensor Inter-faces, Air Pressure Die Balance, 30-60 Strokes/Min

Minster P Series Straight Side Stamping Presses

MINSTER & BLISS HIGH SPEED STAMPING

www.AAGAuction.comSTAMPING PRESSES :Bliss HP2-500-84X48 500-Ton Straight Side Stamping Press s/n C50355-2 w/ Bliss Controls, Data Instruments SmartPAK Wintriss Press Automation Control, AutoSetPAC, Wintriss Load Analyzer, (2) Programmable Cam Outputs, DiPRO and DSI2 Sensor Interfaces, Air Pressure Die Balance, 30-60 Strokes/Min, 6” Stroke, 6” Slide Adj, 18” Shut Height, 84” x 48” Bolster, COE “Servo Master Series” mdl. CPRF-S424 24” Feeder with Digital Controller.Minster P2-150-48 “Piece Maker” 150-Ton Straight Side Stamping Press s/n P2-150-17189 w/ Minster Controls, Data Instruments SmartPAK Wintriss Press Automation Control, Wintriss Load Analyzer, DiPRO Sensor Interface, Shadow 8 Light Curtain, Air Clutch, 75-150 Strokes/Min, 5” Stroke, 4” Slide Adj, 23” Shut Height, 40” x 48” Bolster, Littell 18” Mechanical Feeder, Cooper-Weymouth 24” Straightener/Feeder, Perfecto mdl. 24-48-2500POR Coiler.Minster P2-100-42 “Piece Maker” 100-Ton Straight Side Stamping Press s/n P2-100-24660 w/ Minster Controls, Data Instruments DiPRO 1500 Wintriss Die Protection, Wintriss Load Analyzer, Shadow VII Light Curtain, Air Clutch, Counterbalance 97 Sq/In, 0-300 Strokes/Min, 3” Stroke, 4” Slide Adj,26” Shut Height, 31” x 42” Bolster.Minster P2-100-42 “Piece Maker” 100-Ton Straight Side Stamping Press s/n P2-100-12004 w/ Minster Controls, Honeywell SmartPAK Wintriss Press Automation System, Wintriss Load Analyzer, Wintriss DSI2 Sensor Input Module, Shadow IV Light Curtain, Air Clutch, 2” Stroke, 4” Slide Adj, 31” x 42” Bolster, Littell 14” Mechanical Feeder, US Tool No.9 Mechanical Slide Feed.Verson 7 ½ OBG 105-Ton Open Back Gap Stamping Press s/n 19907 w/ Air Clutch, 8” Stroke, 4” Slide Adj, 18” Shut Height, 35 Strokes/Min, 30” x 39” Bolster, Verson Type K1614-4 17.7-Ton Cushion, Bijor Lubrication System, CAO mdl. CF-400 12” x 18” Air Feeder, Littell mdl. 418-7PDS 18” x .050” Straightener/Feeder, Littell 18” x 40” Coiler.Verson 7 ½ OBG 105-Ton Open Back Gap Stamping Press s/n 7570 w/ Air Clutch, 8” Stroke, 4” Slide Adj, 18” Shut Height, 35 Strokes/Min, 30” x 39” Bolster.Aida 8 mdl. C1-8(1) 80-Ton Stamping Press w/ Data Instruments SmartPAK Wintriss Press Automation Controls, DiPRO Sensor Interface, Programmable Cam Outputs, Die Weight Air Balance, 40-115 Strokes/Min, 3.93” Stroke, 3.15” Slide Adj, 9.84” Shut Height, 23.62” x 52.36” Bolster, Rapidair 8” x 10” Air Feeder, Durant mdl. MDW-0057 Wire Straightener/Feeder, 3500 Lb Cap Wire Uncoiler.Minster 6 60-Ton OBI Stamping Press s/n 6F-16606 w/ Data Instruments SmartPAK Wintriss Press Automation System, DiPRO Sensor Interface, Programmable Cam Outputs, 180 Strokes/Min, 4” Stroke, 3” Slide Adj, 16” Shut Height, 14” x 21” Bolster, PA Industries SRF-210 8” Feeder, Cooper-Weymouth mdl. 12BCS 5000 Lb Cap 12” x 48” Coil Cradle.Minster 6-101 Flywheel Type 60-Ton OBI Stamping Press s/n 6-101-20931 w/ 90-180 Strokes/Min, Air Clutch, 3” Stroke, 2.75” Slide Adj, 13.5” Shut Height, 21” x 32” Bolster, Jack Style Incline Adj, Rapidair 12” x 16” Air Feeder.Minster No. 6 60-Ton OBI Stamping Press s/n 6-10544 w/ Air Clutch, 4” Stroke, 3” Slide Adj, 21” x 32” Bolster.Bliss C45 45-Ton OBI Stamping Press s/n H69381 w/ Data Instruments SmartPAK Wintriss Press Automation System, Air Die Balance, Air Clutch, 3” Stroke, 3” Slide Adj, 12 ¼” Shut Height, Rapidair 6” x 10” Air Feeder, Cooper-Weymouth 12” Straightener/Feeder.Bliss 45-Ton OBI Stamping Press s/n H-67522 w/ Air Clutch, Air Pressure Balance, 80-160 Variable Strokes/Min, 3” Stroke, 3” Slide Adj, 12 ¼” Shut Height, 18” x 30” Bolster.Minster No. 5 45-Ton OBI Stamping Press s/n 5-10095 w/ Air Clutch, 3” Stroke, 2 ¾” Slide Adj, 18” x 28” Bolster.Bliss 35-Ton OBI Stamping Press s/n H67640 w/ Air Clutch, 2 ½” Stroke, 3” Slide Adj, 10 ¾” Shut Height, 17” x 26” Bolster.Bruderer BTSA25 30-Ton High Speed 4-Post Stamping Press s/n 3828 w/ Bruderer Controls, Tyco Wintriss Controls, 100-1500 Strokes/Min, ½”-1 ½” Stroke, Air Clutch, 17” x 21” Bolster, Mechanical Feeder.Bruderer BTSA25 30-Ton High Speed 4-Post Stamping Press w/ Bruderer Controls, Tyco Wintriss Controls, 100-1500 Strokes/Min, ½”-1 ½” Stroke, Air Clutch, 17” x 21” Bolster, Mechanical Feeder.Dallas mdl. CODE#06090 12”x48”x2500# Cap Coiler s/n 15941.Regal mdl. 1500-12SRP 1500 Lb Cap x 12” Motorized Coiler s/n 18994.Regal mdl. 1500-12-SRP 1500 Lb Cap x 12” Coiler.(2) Regal mdl. 750-12-SRP Motorized Coilers.American Steel Line mdl. 1000 600 Lb Cap Coiler.Perfecto Dual Coiler.PA Industries Motorized Coiler.Cooper-Weymouth 18” Coil Cradle w/ Straightener/Feeder.Cooper-Weymouth 12” Coil Cradle w/ Straightener/Feeder.Cooper-Weymouth 8” Coil Cradle w/ Straightener/Feeder.Littell mdl. 212-17PD 12” Straightener/Feeder.Benchmaster mdl. 910SS 10” Straightener/Feeder.

CNC MILL :Richmond “600 Group” VMC 1000 CNC Vertical Machining Center s/n CV0070 w/ Fanuc/Richmond Controls, 20-Station ATC, CAT-40 Taper Spindle, 8000 Max RPM, Hand Wheel, 20” x 44” Table, Coolant.

CNC EDM :1996 Mitsubishi CX-20 CNC Wire EDM Machine s/n 0662 w/ Mitsubishi WIICX Controls, 6-Axis Simultaneous Controls X, Y, U, V, and Z, Graisen Tooling System, Dielectric Cooling and Filtration System.

MILLS :Bridgeport Vertical Mill s/n 256910 w/ Acu-Rite MillMate DRO, 2Hp Motor, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9” x 42” Table.Bridgeport Vertical Mill s/n 256753 w/ Acu-Rite MillMate DRO, 2Hp Motor, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9” x 42” Table.Bridgeport Series 1 – 2Hp Vertical Mill s/n 227600 w/ Acu-Rite MillMate DRO, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9” x 42” Table.Lagun FTV-1 Vertical Mill w/ Tri-Onics Mini-II DRO, 2Hp Motor, Dial Change RPM, Power Feed, 9” x 42” Table.Bridgeport Vertical Mill s/n 189064 w/ Mitutoyo DRO, 1Hp Motor 80-2720 RPM, Chrome Ways, Power Feed, 9” x 42” Table.Bridgeport Vertical Mill w/ 1Hp Motor, 80-2720 RPM, Power Feed, 9”” x 42” Table.Moore No. 1 ½ Jig Boring Machine s/n J330 w/ Power Feeds, 10 ½” x 19 ½” Table.

Grinding DepartmentJones-Shipman 540H 6” x 18” Automatic Surface Grinders w/PG Ltd Optical Dressers

Aida 8 mdl. C1-8(1) 80-Ton Stamping Press w/ Data Instruments SmartPAK Wintriss Press Automation Controls, DiPRO Sensor Inter-face, Programmable Cam Outputs, Die Weight Air Balance, 40-115 Strokes/Min

Bliss C45 45-Ton OBI Stamping Press w/ Data Instruments SmartPAK Wintriss Press Automation System, Air Die Balance, Air Clutch

80 TON 45 TON

LARGE SELECTION

www.AAGAuction.com THURSDAY MARCH 2, 2017www.AAGAuction.comLATHES :Victor 1640 16” x 40” Geared Head Gap Bed Lathe s/n 56309 w/ 32-1800 RPM, Inch/mm Threading, Tailstock, Steady Rest, 5C Collet Closer, Mack Tool Post, 10” 4-Jaw Chuck, 8” 3-Jaw Chuck.Standard-Modern 13” x 32” Geared Head Second OP Lathe s/n 4983 w/ 50-1500 RPM, Tailstock, 5C Collet Closer, KDK Tool Post, 8” 4-Jaw Chuck, 8” 3-Jw Chuck.

GRINDING :Jones-Shipman 540H 6” x 18” Automatic Surface Grinder s/n 101053 w/ PG Ltd Precision Optical Radius Dresser, Walker Fine-Line Electromagnetic Chuck.Jones-Shipman 540H 6” x 18” Automatic Surface Grinder s/n 101052 w/ PG Ltd Precision Optical Radius Dresser, Walker Fine-Line Electromagnetic Chuck.Brown & Sharp 824 Micromaster 8” x 24” Automatic Surface Grinder s/n 523-824-860 w/ Fine-Line Electromagnetic Chuck, 12” Wheel Cap, Coolant.Boyar Schultz Challenger H612 6” x 12” Surface Grinder s/n 28660 w/ Boyar Schultz High Speed ID Grinding Attachment, Walker Fine-Line Electromagnetic Chuck.Boyar Schultz Challenger H612 6” x 12” Surface Grinder s/n 25322 w/ PG Ltd Precision Optical Radius Dresser s/n 4454, LBP Fine-Line Electromagnetic Chuck.Boyar Schultz Challenger H612 6” x 12” Surface Grinder s/n 25318 w/ LBP Fine-Line Electromagnetic Chuck.Boyar Schultz Challenger H612 6” x 12” Surface Grinder s/n 22311 w/ Magnalock Fine-Line Electromagnetic Chuck.Abrasive Machine Tool No. 1 ½ 10” x 15” Surface Grinder w/ Magnetic Chuck.Taft-Peirce 5” x 12” Surface Grinder w/ Walker Fine-Line Electromagnetic Chuck.

SUPPORT MACHINERY :Asquith mdl. FS-5729 36” Radial Arm Drill s/n OD1-11333 w/ 31-830 RPM, 3X Gearbox 90-2490 RPM, Power Column and Feeds, 33” x 42” x 20” Fixture Table, Coolant.Hansvedt SM-160B Die Sinker EDM Machine s/n 26345 w/ Hansvedt 150B Power Source, Coolant System, Maple-Top Work Bench.Sunnen MBB-1600 Precision Honing Machine s/n 45331 w/ Mandrels, Stones and Truing Sleeves.Grob 24” Vertical Band Saw w/ Blade Welder.Powermatic mdl. 87 20” Vertical Band Saw w/ 50-4500 Dial FPM, Blade Welder.Johnson mdl. J 10” Horizontal Band Saw s/n J-14542.Famco mdl. 652 52” Kick Shear.Enco 48” Pan Brake s/n 900066.Nugier mdl. H40-7 40-Ton Sliding Ram H-Frame Press s/n 4809093.Snow mdl. MV-18T Automatic Lead Screw Tapping Machine s/n M42938-1293.(2) Edlund mdl. 2F-15 Deep Hole Drill Presses w/ 100-2400 Variable Speed RPM, 24” x 38” Table.Columbia 12-Speed Pedestal Drill Press.Precision Drill Sharpener.Stanley 8” Pedestal Grinder.Dayton 6” Pedestal Grinder.Rockwell 6” Belt / 12” Disc Sander w/ Stand.(2) Torit mdl. 84 Dust Collectors.Kelco mdl. CS21C Dry Blast Cabinet.Rice/Milwaukee mdl. FS Die Filer.Lincoln Weld-PAK 175HD Arc Welding Power Source.Welding Torch Cart w/ Acces.Sullair mdl. 20-100H-ACAC 100Hp Rotary Vane Air Compressor s/n 003-86164.Sullair mdl. 16-75 75Hp Rotary Vane Air Compressor.Sullair mdl. SRD-830AC Refrigerated Air Dryer.Airtek Refrigerated Air Dryer.250 Gallon Air Storage Tank.Clean-Sweep Air Systems mdl. RC-811766/371 Air Handling System.Water Reclamation System w/ Tanks, Filters and Pumps.Blue-M Stabil-Therm Oven.

FINISHING MACHINES :Roto-Finish “Spiratron” 35 Cu/Ft 112” Hydraulic Media Tumbler w/ LMI Media Control Package.Sweco mdl. FMD-14LR 15 Cu/Ft 57” Media Tumbler.Speed-D-Burr mdl. SMHSB 7.5 Cu/Ft Media Tumbler s/n 6001 w/ Separation and Recovery Table.PFS 7.5 Cu/Ft 48” Media Tumbler w/ LMI Media Control Package.Sweco mdl. FMD-7LR-2 7 Cu/Ft 44” Media Tumbler.BMT “Multibarrel” mdl. 2MB-200 6-Barrel Slide Hone Finishing Mill s/n 378.(2) New Holland mdl. K-24 Spin Dryers.Automated Finishing 21” Pass-Thru Wash Line w/ Wash, Rinse and Heat Cycles, Mist Collector.

Minster P2-150-48 “Piece Maker” 150-Ton Straight Side Stamp-ing Press w/ Minster Controls, Data Instruments SmartPAK Wintriss Press Automation Control, Wintriss Load Analyzer, DiPRO Sensor Interface, Shadow 8 Light Curtain, Air Clutch, 75-150 Strokes/Min

Verson 7 ½ OBG 105-Ton Open Back Gap Stamping Presses w/ Air Clutch, 8” Stroke, 4” Slide Adj, 18” Shut Height, 35 Strokes/Min, 30” x 39” Bolster, Verson Type K1614-4 17.7-Ton Cushion

Minster P2-100-42 “Piece Maker” 100-Ton Straight Side Stamping Press w/ Minster Controls, Data Instruments DiPRO 1500 Wintriss Die Protection, Wintriss Load Analyzer, Shadow VII Light Curtain, Air Clutch, Coun-terbalance 97 Sq/In, 0-300 Strokes/Min

Bruderer BTSA25 30-Ton High Speed 4-Post Stamping Presses w/ Bruderer Controls, Tyco Wintriss Controls, 100-1500 Strokes/Min

150 TON 100 TON

150 TONMUST SEE

100 TON

Minster P2-100- 42 “Piece Maker” 100-Ton Straight Side Stamping Press w/ Minster Controls,Honeywell SmartPAK Wintriss Press Automation System, Wintriss Load Analyzer, Wintriss DSI2 SensorInput Module, Shadow IV Light Curtain, Air Clutch

DIRECTIONS: FROM LOS ANGELES, TAKE HWY-91 EAST. EXIT ON KRAEMER BLVD/GLASSELL AND KEEP LEFT TO EXIT ONTO N. KRAEMER. TURN LEFT ON E. LA PALMA. LOOK FOR “AUCTION TO-DAY” SIGNS.

TERMS OF SALE: CASH OR “CASHIERS” CHECK ONLY. 15% “BUYER’S” PREMIUM ON ALL PURCHASES.$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH DEPOSIT TOWARDS ALL PURCHASES. ALL SALES ARE SUBJECT TO CALIFORNIA SALES TAX. THERE WILL BE NO EXCEPTIONS.

BID LIVE OR VIA WEBCAST

`

PUBLIC AUCTION: MARCH 2, 2017

MAJOR METAL STAMPING & MACHINING FACILITY

TERMS OF SALE: CASH OR CASHIERS CHECK ONLY. 15% BUYERS PREMIUM ON ALL PURCHASES.$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH DEPOSIT TOWARDS ALL PURCHASES. ALL SALES ARE SUBJECT TO CALIFORNIA SALES TAX. THERE WILL BE NO EXCEPTIONS.

BID LIVE OR VIA WEBCAST

FEATURING:TOOLING :(2) Kurt 6” Angle-Lock Vises.(3) 6” Angle-Lock Vises.Yuasa 12” Rotary Table.(30) CAT-40 Taper Tooling.(100)5C Collets.(80) R8 Collets.Harig Grind-All No.`ion Grinding Fixtures.Suburban 6” x 6” Magnetic Sine Chuck.4” x 4” Magnetic Sine Chuck.10” x12” Sine Table.Radius/Angle Dressers.Precision Grinding Vises.Criterion Boring Heads.Angle Plates.5C Spin Fixtures.(3) Huot Drill Cabinets.Drills, Taps, Endmills, Reamers and Perishable Tooling.9-Drawer Tooling Cabinet.

INSPECTION :ROI OMIS II Video Inspection System w/ ROI Optical Video Probe, Panasonic Monitor and Synchronous Crosshair Generator, Dual Light Sources, Table.Nikon mdl. V-12 12” Optical Comparator w/ Nikon MC-102 DRO, 20X-50X-100X Lenses, Stand.Jones & Lampson 14” Floor Model Optical Comparator w/ 10X-20X-31.25X-50X-62.5X-100X Selectable Magnification, Surface and Profile Illumination.Jones & Lampson 14”Floor Model Optical Comparator w/ Acu-Rite Qwikcount DRO, Surface and Profile Illumination.Wilson mdl. 4JR Rockwell Hardness Tester.Wilson Rockwell Hardness Tester s/n 568.Mitutoyo TM-111 Tool Makers Microscope.Linitron and Bausch & Lomb Microscopes.Mitutoyo 13” Height Master.Mitutoyo 12” Height Master.Brown & Sharpe “Data-Hite” 18” Digital Height Gage.(2) 24” Dial Height Gages.Mitutoyo 24”, 18” and 12” Vernier Height Gages.Mitutoyo Gage Block Sets.Mitutoyo 6”-12” OD Mic Set.Starrett 6”-12” OD Mic Set.Lufkin 0-6” OD Mic Set.Mitutoyo and Starrett OD Mics.Brown & Sharp Bore Mics.Fowler 24” Digital Caliper.Mitutoyo 6” and 12” Dial Calipers.Meyer .061-.0615 to .500-.5005 Pin Gage Cabinet.Mitutoyo Digital Indicator w/ Granite Base.Standridge 36” x 48” x 6 ½” Granite Surface Plate w/ Stand.30” x 48” x 6” Granite Surface Plate.Standridge 24” x 36” x 4” 2-Ledge Granite Surface Plate w/ Roll Stand.Standridge 24” x 36” x 4” Granite Surface Plate w/ Stand.

MATERIAL HANDLING :1996 Ford Ranger XL Pickup Truck w/ 2.3L Gas Engine, 4-Speed Manual Trans, 151,569 Miles, VIN# 1FTCR10A5TUA80166.Komatsu FG30S 5600 Lb Cap LPG Forklift s/n 172611 w/ 3-Stage Mast, 185” Lift Height, Cushion Tires.Komatsu FG30ST-4 5400 Lb Cap LPG Forklift s/n 175817 w/ 169” Lift Height, Side Shift, Cushion Tires.Clark CGX25 4000 Lb Cap LPG Forklift s/n GX230-0319-7960KOF w/ 3-Stage Mast, 188” Lift Height, Cushion Tires.Komatsu FR18S 3500 Lb Cap Stand-In Electric Pallet Mover s/n FRS30-13962002 w/ 240” Lift Height, 36V, Charger.Economy “Hi-Jacker” 300 Lb Cap Man Lift.(5) Big Joe mdl. 1056 1500 Lb Cap Electric Die Lifts.(2) T & S 1000 Lb Cap Hydraulic Barrel Lifts.(2) Pallet Jacks.Downs 2-Ton Portable A-Frame Gantry w/ Dayton Electric Hoist.General Hoist 2-Ton Portable A-Frame Gantry w/ Dayton Electric Hoist.Die Tables 4’ x 6’ and 4’ x 8’.(34) Sections of Pallet Racking.Material Racks and Die Racks.NCI 5000 Lb Cap Digital Platform Scale.

Nikon mdl. V-12 12” Optical Comparator

ROI OMIS II Video Inspection System w/ ROI Optical Video

Clark CGX25 4000 Lb Cap LPG Forklift

Automated Finishing 21” Pass-Thru Wash Line

MINSTER & BLISS HIGH SPEED STAMPING

Richmond VMC 1000 CNC Vertical Machining Center w/ Fanuc/Richmond Controls, 20-Station ATC, CAT-40 Spindle, 8000 RPM

1996 Mitsubishi CX-20 CNC Wire EDM Machine w/ Mitsubishi WIICX Controls

Milling Department Victor 1640 16” x 40” Geared Head Gap Bed Lathe

AM

ERIC

AN

AUCTION

EERS

GROUP

AA

AMERICAN AUCTIONEERS GROUP1146 N Central Avenue #535Glendale, California 91202Phone: 818-763-2021 Fax: 818-291-9495WWW.AAGAUCTION.COM

First-Class MailPRESORTED

U.S. PostagePAID

STA CLARITA, CAPermit No. 298

AUCTION LOCATION:

WEDNESDAY MARCH 8, 2017FROM 9:00 am - 3:00 pm

ONLINE AUCTION: MARCH 9, 2017

AUCTION PREVIEW:

4692 N. BRAWLEY AVEFRESNO, CA. 93722

MITSUBISHI & MAZAK CNC LASER CUTTING FACILITY

PUB

LIC

AU

CT

ION

Online bidding thru bidspotter.com

PUB

LIC

AU

CT

ION

MAJOR LASER CUTTING & FAB FACILITY

Mitsubishi CNC Laser Processing Machines ***9-AVAILABLE***

1978 Cincinnati mdl. 350CB X 12 350 Ton x 12’ Hydraulic CNC Press Brake s/n 41268 w/ Automec Auto Gauge 1000 CNC Controlled Back Gauging

ONLINE AUCTION

ONLINE TIMED AUCTIONENDS THUR MARCH 9,2017 @ 11:00 (PST)

350 TON

9 AVAILABLE

Mitsubishi and Mazak Laser Machines

4 AVAILABLE

CNC

TERMS OF SALE: CASH OR “CASHIERS” CHECK ONLY. 18% “BUYER’S” PREMIUM ON ALL PURCHASES.$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH DEPOSIT TOWARDS ALL PURCHASES. ALL SALES ARE SUBJECT TO CALIFORNIA SALES TAX. THERE WILL BE NO EXCEPTIONS.

BID LIVE OR VIA WEBCAST

www.AAGAuction.com2001 2002

2001 Mitsubishi ML3015 HD IIP (S) Dual Table CNC Laser Processing Machine s/n 613HD II P031 w/ Mitsubishi LC20B Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML5036D-S2 CO2 Laser Unit and Processing System, (2) 60” x 120” Tables

2002 Mitsubishi ML3015HD IIP (S) Dual Table CNC Laser Processing Machine s/n 123HDIIP082 w/ Mitsubishi LC20B Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML5036D-S1 CO2 Laser Unit and Processing System, Accuchiller Cool-ing Unit, 2-Pallet Shuttle System, (2) 60” x 120” Tables

1996 Mitsubishi ML3015HD CNC Laser Processing Machine s/n 1630HD111 w/ Mitsubishi LC10BV Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML4030D CO2 Laser Unit and Processing System

1996 Mitsubishi ML2512HD CNC Laser Processing Machine s/n 6625HD174 w/ Mitsubishi LC10BV Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML4030D CO2 Laser Unit and Processing System

1996 Mitsubishi ML3015HD CNC Laser Processing Machine s/n 1630HD111 w/ Mitsubishi LC10BV Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML4030D CO2 Laser Unit and Processing System

1998 Mitsubishi ML2512HD CNC Laser Processing Machine s/n ML1825HD224 w/ Mitsubishi Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi mdl. 4030D CO2 Laser Unit and Processing System

Mitsubishi and Mazak Laser Machines 13 AVAILABLE***

ONLINE AUCTION

13 AVAILABLE

3000 WATTS3000 WATTS

3000 WATTS

3000 WATTS 3000 WATTS

3000 WATTS

AUCTION ENDS : MARCH 9, 2017 @ 11:00 (PST)www.AAGAuction.com

CNC LASER PROCESSING MACHINES :2002 Mitsubishi ML3015HD IIP (S) Dual Table CNC Laser Processing Machine s/n 123HDIIP082 w/ Mitsubishi LC20B Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML5036D-S1 CO2 Laser Unit and Processing System, Accuchiller Cooling Unit, 2-Pallet Shuttle System, (2) 60” x 120” Tables, 15,501 Total Hours, 107 Hours Since Last Rebuild March 3, 2016.2001 Mitsubishi ML3015 HD IIP (S) Dual Table CNC Laser Processing Machine s/n 613HD II P031 w/ Mitsubishi LC20B Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML5036D-S2 CO2 Laser Unit and Processing System, Accuchiller Cooling Unit, 2-Pallet Shuttle System, (2) 60” x 120” Tables, 2,094 Total Hours, 798 Hours Since Last Rebuild August 24, 2015.1998 Mitsubishi ML2512HD CNC Laser Processing Machine s/n 68251HD238 w/ Mitsubishi LC10BV Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML5036D-S1 CO2 Laser Unit and Processing System, Accuchiller Cooling Unit, 48” x 96” Table, 19,173 Total Hours, 1,834 Hours Since Last Rebuild December 15, 2015.1998 Mitsubishi ML2512HD CNC Laser Processing Machine s/n ML1825HD224 w/ Mitsubishi Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi mdl. 4030D CO2 Laser Unit and Processing System, Accuchiller Cooling Unit, 48” x 96” Table, 12,439 Total Hours, 1,093 Hours Since Lase Rebuild July 12, 2014.1996 Mitsubishi ML3015HD CNC Laser Processing Machine s/n 1630HD111 w/ Mitsubishi LC10BV Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML4030D CO2 Laser Unit and Processing System, Accuchiller Cooling Unit, 60” x 120” Table, 17,803 Total Hours, 1,268 Hours Since Last Rebuild October 16, 2015.1996 Mitsubishi ML3015HD CNC Laser Processing Machine s/n 1630HD110 w/ Mitsubishi LC10BV Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML4030D CO2 Laser Unit and Processing System, Accuchiller Cooling Unit, 60” x 120” Table, 15,269 Total Hours, 1,383 Hours Since Last Rebuild July 1, 2015.1996 Mitsubishi ML3015HD CNC Laser Processing Machine s/n 6530HD098 w/ Mitsubishi Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML4030D CO2 Laser Unit and Processing System, Accuchiller Cooling Unit, 60” x 120” Table, 17,964 Total Hours, 1,993 Hours Since Last Rebuild February 11, 2014.1996 Mitsubishi ML2512HD CNC Laser Processing Machine s/n 6625HD174 w/ Mitsubishi LC10BV Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML4030D CO2 Laser Unit and Processing System, Accuchiller Cooling Unit, 48” x 96” Table, 16,820 Total Hours, 1,502 Hours Since Last Rebuild December 8, 2014.1996 Mitsubishi ML2512HD CNC Laser Processing Machine s/n 1625HD140 w/ Mitsubishi LC10BV Controls, Hand Wheel, 3000 Watt Laser, Mitsubishi ML4030D CO2 Laser Unit and Processing System, Accuchiller Cooling Unit, 48” x 96” Table, 12,040 Total Hours, 1,934 Hours Since Last Rebuild October 3, 2014.1995 Mazak Super Turbo-X48 Hi-Pro Supercharged CNC Laser Processing Machine s/n 115645 w/ Mazak L32 Controls, 2000 Watt Laser mdl. CO2 LASER YB-L200B 7M6, Travels X=104.3”, Y=50”, Z= 3.9”, 49.2” x 98.4” Table, Orion Cooling Unit, 46,457 Total Hours, Last Rebuilt December 22, 2014.1993 Mazak Super Turbo-X510 Hi-Pro CNC Laser Processing Machine s/n 100812 w/ Mazak L32 Controls, 2000 Watt Laser mdl. CO2 LASER YB2006LB 5M2, Travels X=129.1”, Y=62”, Z=3.8”, 60” x 129” Table, Orion Chilling Unit, 57,190 Total Hours, Last Rebuilt July 1, 2015.1995 Mazak Super Turbo-X48 Hi-Pro Supercharged CNC Laser Processing Machine s/n 115554 w/ Mazak L32 Controls, 2000 Watt Laser mdl. CO2 LASER YB-L200B 7M6, Travels X=104.3”, Y=50”, Z= 3.9”, 49.2” x 98.4” Table, Orion Cooling Unit, 48,952 Total Hours (NEEDS X-AXIS SERVO AMP $4000 AND Y-Z SERVO AMP $7000).1995 Mazak Super Turbo-X48 Hi-Pro Supercharged CNC Laser Processing Machine s/n 115564 w/ Mazak L32 Controls, 2000 Watt Laser mdl. CO2 LASER YB-L200B 7M6, Travels X=104.3”, Y=50”, Z= 3.9”, 49.2” x 98.4” Table, Orion Cooling Unit, 46,316 Total Hours (NEEDS Y-Z SERVO AMP $7000).(8) Hakusan Kiko 13” x 42” Motorized Slug Conveyors (FOR MITSUBISHI LASER MACHINES).(6) Tsubakimoto Mayfran mdl. MT10 12” x 48” Slug Conveyors (FOR LASER MACHINES).

CNC PRESS BRAKES :1978 Cincinnati mdl. 350CB X 12 350 Ton x 12’ Hydraulic CNC Press Brake s/n 41268 w/ Automec Auto Gauge 1000 CNC Controlled Back Gauging, 14’ Bed Length, 10” Stroke, 10” Throat Depth, 12’6” Between Uprights, Full Set of 8” x 8” Extension Base Plates for Stamping, STI OptoSafe Light Curtain.1994 Accurpress mdl. 7606 60 Ton x 6’ CNC Hydraulic Press Brake s/n 2448 w/ Accurpress CNC Controls and Gaging System, 6’ Bed Length, 8 1/8” Throat Depth, 54 ¾” Between Uprights, STI OptoSafe Light Curtain.

1993 Mazak Super Turbo-X510 Hi-Pro CNC Laser Processing Machine s/n 100812 w/ Mazak L32 Controls, 2000 Watt Laser mdl. CO2 LASER YB2006LB 5M2

1995 Mazak Super Turbo-X48 Hi-Pro Supercharged CNC Laser Processing Machine s/n 115645 w/ Mazak L32 Controls, 2000 Watt Laser mdl. CO2 LASER YB-L200B 7M6

2005 On Site Gas Systems mdl. N-300 O2N2 Nitrogen Generator System s/n 3137 w/ N-Tron mdl. 1000 O2 Analyzer

Mazak CNC Laser Machines ***4-AVAILABLE***

4 AVAILABLE

2005

Bushman ½ Ton Cap Motorized Floor Mounted Jib w/ CM Loadstar ½ Ton Electric Hoist

2000 WATTS

2000 WATTS

DIRECTIONS: FROM CENTRAL FRESNO, TAKE HWY-99 NORTH. EXIT ON W ASHLAN AVE AND TURN RIGHT. TURN RIGHT ON N WEBER AVE. WEBER BECOMES N BRAWLEY. LOOK FOR “AUCTION TODAY” SIGNS.

ONLINE AUCTION: MARCH 9, 2017

MAJOR LASER CUTTING & FAB FACILITY

FEATURING:SUPPORT MACHINERY :Pexto / Chicago 10’ Pan Brake.Whitney – Jenson 48” Finger Brake.Strippit 9” Shear.(3) Wales-Strippit 5” x 5” Corner Notchers.Wales-Strippit and Unipunch Tooling.(2) Torit mdl. TD-970 Dust Collection Systems w/ Dual Drum Dis-charge.Torit mdl. TD-650 Dust Collection System w/ Drum Discharge.Quincy mdl. FE390105 15Hp Horizontal Air Compressor w/ 120 Gallon Tank.Hankison mdl. PR50 Refrigerated Air Dryer s/n 0355-9T-9410-1N.575 Gallon Horizontal Air Storage Tank.

MATERIAL HANDLING :(5) Bushman ½ Ton Cap Motorized Floor Mounted Jibs w/ CM Loadstar ½ Ton Electric Hoist, Motorized Rotation.Bushman ½ Ton Cap Motorized Floor Mounted Jib (NO HOIST).½ Ton Cap Floor Mounted Jib w/ 12’ Span, CM Loadstar ½ Ton Cap Electric Hoist.CM 7 ½ Ton Electric Crane Hoist.(9)CM Loadstar 1 Ton Cap Electric Hoists w/ Trolleys.(4) CMCI mdl. UNIVAC330 2210 Lb Cap Vacuum Sheet Lifts.(2) CMCI mdl. UNIVAC330 1060 Lb Cap Vacuum Sheet Lifts.(4) CMCI mdl. PUP330 1060 Lb Cap Vacuum Sheet Lifts.Acco VAC-U-LIFT mdl. 7600-24-4-4-8-B16N30 Vacuum Sheet Lift.(2) Acco VAC-U-LIFT mdl. 3200 POWER PAK Vacuum Sheet Lifts.(2) Acco mdl. 3200 Vacuum Sheet Lifts.

Torit Dust Collectors Torit TD-970 Dust Collector ***2-AVAILABLE***

CMCI UNIVAC330 2210 Lb Cap Vacuum Sheet Lift

CMCI PUP330 1060 Lb Cap Vacuum Sheet Lift

1994 Accurpress mdl. 7606 60 Ton x 6’ CNC Hydraulic Press Brake s/n 2448 w/ Accurpress CNC Controls and Gaging System

Pexto / Chicago 10’ Pan Brake

TERMS OF SALE: CASH OR “CASHIERS” CHECK ONLY. 18% “BUYER’S” PREMIUM ON ALL PURCHASES.$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH DEPOSIT TOWARDS ALL PURCHASES. ALL SALES ARE SUBJECT TO CALIFORNIA SALES TAX. THERE WILL BE NO EXCEPTIONS.

BID LIVE OR VIA WEBCAST

TERMS OF SALE: CASH OR “CASHIERS” CHECK ONLY. 18% “BUYER’S” PREMIUM ON ALL PURCHASES.$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH DEPOSIT TOWARDS ALL PURCHASES. ALL SALES ARE SUBJECT TO CALIFORNIA SALES TAX. THERE WILL BE NO EXCEPTIONS.

BID LIVE OR VIA WEBCAST