autocad 3d all commands
TRANSCRIPT
-
8/9/2019 AutoCAD 3D All Commands
1/34
Complete AutoCAD CommandsCommand Description Options
ABOUT Displays a dialogue box with AutoCADversion & serial numbers
can be transparent
APERTURE Controls the size of the Object Snap"OSNAP") target box -- should set to 7
can be transparent
ARCor
A
Draws an arc. The default method ofdrawing arcs is selecting three points (so-called "3 point arc"), which are the twoendpoints of the arc and some other pointalong its locus. Other methods of drawingan arc can be specified by three letters,
such as SEA, which means "Start Point,End Point, and Included Angle."
A Included angleC Center point of arcD Direction angle of a line tangent to thearcE Endpoint of arcL Length of chord passing thru bothendpoints of the arcR RadiusS Start point of arc
uses the end of the last line or arc asthe start point for the arc
AREA Computes the area of any shape byselecting points at the corners of the
shape, or by selecting a circle or polylineafter typing or picking the "E" option
A sets "Add" modeS sets "Subtract" modeE computes area of selected circle orpolyline
ARRAY Makes multiple copies of selected objectsin a rectangular (parallel with the snaprotation) or circular pattern
R rectangular array typeP "polar" array type in circular pattern,you must indicate number of items andangle to fill, and whether the objects getrotated with the angleC "circular" array type in a circularpattern, you must indicate angle between
items, angle to fill, and whether objectsget rotated with the angle
ATTDEF Creates an attribute definition entity for textual information to be associated with ablock definition
I Controls attribute visibilityC Controls Constant/variable modeV Controls verify mode
-
8/9/2019 AutoCAD 3D All Commands
2/34
P Controls preset mode
ATTDISP Controls the visibility of attribute entitieson a global basis
can be transparentON Makes all attributes visibleOFF Makes all attributes invisible
N Visibility of attributes setindividually
ATTEDIT Permits editing of attributes
ATTEXT Extracts attribute data from drawings C CDF comma delimited format extractD DXF format extractS SDF format extractE Extracts attributes from selected
entities
AUDIT Invokes drawing integrity audit Y Fixes errors encounteredN Reports, but does not fix errorsencountered
BASE Specifies origin of current drawing for subsequent insertion into another drawing-- is normally set to point 0,0,0
can be transparent
BHATCH Fills an automatically defined boundarywith a hatch pattern through the use ofdialogue boxes. Also allows previewing
and replacing adjustments without startingover each time.
BLIPMODE Controls display of marker blips for pointselection
can be transparentON Enables temporary marker blips
OFF Disables temporary marker blips
BLOCK Forms a single compound entity from agroup of entities within the currentdrawing
? Lists names of already-defined blocksin the current drawing
BPOLY Creates a closed polyline of a boundary
by picking an open area within a areaenclosed by lines, arcs or circles.
BREAK Erases part of a line, arc or circle, or splitsit into two lines or arcs
F allows respecification of first point
CHAMFER Creates a chamfer (a angled lineconnection) at the intersection of two lines
D Sets chamfer distancesP Chamfers an entire polyline
-
8/9/2019 AutoCAD 3D All Commands
3/34
CHANGE A multifunctioning command which can beused to alter the following:
1. location of individual endpoints oflines2. radius of a circle
3. properties: layer, elevation,thickness, color and linetype of lines,polylines, arcs and circles4. style, font, size, location, rotation,and wording of text entities
P Changes properties of objectsC ColorE ElevationLA Layer
LT LinetypeT Thickness
CHPROP Modifies properties of selected objects:layer, thickness, color and linetype -- butnot elevation
C ColorLA LayerLT LinetypeT Thickness
CIRCLEorC
Draws a circle of any size. The defaultmethod is to pick a center point and pick apoint on the radius or type the radiusdimension, but other methods can beselected.
2P Specifies circle by picking 2 points onthe diameter3P Specifies circle by picking 3 pointsthrough which the circle will passD Allows entering the diameterdimension instead of radius dimension
TTR Specifies circle by picking twolines, arcs or circles for the circle to
be tangent to, and entering thedimension of the radius Enters radius of circle (thedefault)
COLORor COLOUR
Sets the current color for subsequentlydrawn objects (objects drawn after thecommand is invoked). The default currentcolor is a so-called "logical" color called"BYLAYER" which means that the color ofthe object drawn will be the color whichthe current layer has been set to.
can be transparent sets current color tocolor number entered sets current color tocolor name enteredBYBLOCK sets floating entitycolor
BYLAYER sets current color towhatever color is assigned to thecurrent layer
COMPILE Compiles shape and font files More thanlikely, you will never use this command,unless you are creating your own letter
-
8/9/2019 AutoCAD 3D All Commands
4/34
design or are creating "shapes" to beused as commonly used symbols in thedrawing. These are not typically used inarchitectural drawings
CONFIG Displays options to allow you to
reconfigure the video display, digitizer,plotter, and operating parameters.You should not have to use thiscommand, since the configuration of yoursystem has already been done and youwill have no need to change it.
COPYorCP
Draws a copy of selected objects usingtwo methods -- "base point" method, or"displacement" method.
M Allows multiple copies to be madeof an object
DBLIST Lists database information for every entityin the drawing
DDATTDEF Displays a dialogue box that allowscreation of an attribute definition fortextual information to be associated with ablock definition
I Controls attribute visibilityC Controls Constant/variable modeV Controls verify modeP Controls preset mode
DDATTE Allows attribute editing via a dialogue box
DDATTEXT Displays a dialogue box that extracts data
from a drawing.
C CDF comma delimited format
extractD DXF format extractS SDF format extractE Extracts attributes from selectedentities
DDCHPROP Displays a dialogue box that modifies thecolor, layer, linetype, and thickness ofselected objects
C ColorLA LayerLT LinetypeT Thickness
DDEDIT Allows text and attribute definition editing Undo Undoes edit to return to theprevious value
DDEMODES Sets current entity properties (layer,linetype, elevation, thickness, and textstyle) via a dialogue box
can be transparent
-
8/9/2019 AutoCAD 3D All Commands
5/34
DDGRIPS Allows you to enable grips and set their colors and size via a dialogue box
can be transparent
DDIM Controls dimensioning variables through aseries of dialogue boxes
can be transparent
DDINSERT Allows you to insert a previously madeblock or file into the current drawing,select X- and Y- scale factors, rotationangle, pre-explode the block, and selectthe insertion point, through a dialogue box
DDLMODES Sets layer properties and allows you toset the current layer, create a new layer,freeze and thaw layers, freeze and thawlayers in the current viewport, assign orreassign colors and linetypes to layers,through a dialogue box
can be transparent
DDOSNAP Allows you to set running OSNAPS and
set the size of the target box aperturethrough a dialogue box.
can be transparent
DDRMODES Allows you to set drawing aids variablesthrough a dialogue box
can be transparent
DDRENAME Allows you to rename layers, text styles,linetypes, blocks, views, User CoordinateSystems, viewport configurations, anddimension styles
DDSELECT Allows you to set entity selection modes,size of the pickbox, and entity sort methodthrough a dialogue box
can be transparent
DDUCS Allows you to save the current User Coordinate System and give it a name forfuture retrieval, or to select a UCS that isalready saved
DDUNITS Allows you to set the unit type(Architectural or Decimal), angle displayformat (degrees-minutes-seconds, ordecimal degrees), and precision of theunits,
can be transparent
DELAY This command is used with SCRIPT files.
It will delay the execution of the nextcommand for the time in millisecondsspecified after the DELAY command.
can be transparent
DIM Takes you out of the drawing editor andinto the semi-automatic dimensioningprogram built into AutoCAD. Will display aDim: prompt on the command promptline. To get back to the drawing editor andthe Command: prompt, type the
-
8/9/2019 AutoCAD 3D All Commands
6/34
key.
DIM1 Same as above, but only allows onedimensioning command to be used, andthen takes you automatically back to thedrawing editor and the Command:
prompt.
DIMALIGNED
Dimensioning sub-command:Draws a linear dimension with thedimension line parallel to the
selected dimension origin points.
This lets you align a dimension withan angled line that is not either
exactly horizontal or vertical.
DIMANGULAR
Dimensioning sub-command:Draws an arc and calculates theangle between two non-parallellines, and draws the text and
arrowheads. Arrowheads are the
standard AutoCAD filled triangles,regardless of your defined Arrow
Block.
DIMBASELINE
Dimensioning sub-command:Continues a linear dimension fromthe baseline (the so-called "first
extension line") of the previous or
selected dimension. This is notfrequently used in architectural
dimensions. The spacing between
each dimension line is controlled by
the AutoCAD variable DIMDLI("Dimension Line Increment"),
which you should set at 0 normally,
but if you use the baselinecommand, you should reset to 1/8".
DIMCENTER
Dimensioning sub-command:Draws a pair of crossed lines at the
center of a circle or arc on the
current layer
DIMCONTINUE
Dimensioning sub-command:Continues a linear dimension from
-
8/9/2019 AutoCAD 3D All Commands
7/34
the second extension line of theprevious or selected dimension. It is
used to create a so-called "string" of
dimensions. This is used quite a bitin architectural drawings.
DIMDIAMETER
Dimensioning sub-command:Draws a dimension through the
center of a circle or arc, calculating
the diameter, with one of the arrowheads located at the point on the
circle or arc which is picked.
DIMEXIT
Dimensioning sub-command:Exits the dimensioning program
and returns from the Dim: promptto the normal Command: prompt
DIMHOMETEXT
Dimensioning sub-command:Restores the text of an associativedimension to its default (home)
location if you have moved it.
DIM
HORIZONTAL
Dimensioning sub-command:Draws a horizontal linear dimensionline
DIMLEADER
Dimensioning sub-command:Draws an a line or series of lines
with an arrow head (commonly
called a "leader") to point to anobject to notate it. This command
will also prompt you for the note at
the end of the leader line, but it willallow only one line of text. The most
useful method of using this
command is to simply draw leaders
between the object to be notatedand text that you create with the
DTEXT command.
DIMNEWTEXT
Dimensioning sub-command:Permits changing text of an
associative dimension without
-
8/9/2019 AutoCAD 3D All Commands
8/34
exploding it. However, once the texthas been changed, the dimension
will no longer be associative.
DIMOBLIQUE
Dimensioning sub-command:Adjusts the obliquing angle of alinear associative dimensions
extension lines. Useful in
dimensioning isometric drawings.
DIMORDINATE
Dimensioning sub-command:Draws the X and Y coordinates
within a box with a leader line
attached to the point, for a selected
point. Automatically calculates the
coordinates.DIMOVERRIDE
Dimensioning sub-command:Overrides the dimension variable
settings on a selected dimension.
DIMRADIUS
Dimensioning sub-command:Draws the radius dimension of an
arc or circle from the center to the
point on its locus where the arc orcircle was selected.
DIMREDRAW
Dimensioning sub-command:Redraws the viewport, just like the
regular REDRAW command.
DIMRESTORE
Dimensioning sub-command:Makes a dimension style current
DIMROTATE
Dimensioning sub-command:Draws a linear dimension with the
distance measured origin points, butwith the actual dimension line set ata different angle.
DIMSAVE
Dimensioning sub-command:Saves the currently set dimension
variables under a dimension stylename for future retrieval through
-
8/9/2019 AutoCAD 3D All Commands
9/34
the RESTORE command.
DIMSTATUS
Dimensioning sub-command:Lists all dimension variables with
their current status.
DIMSTYLE
Dimensioning sub-command:Switches to a new Text Style for allfuture dimensions.
DIMTEDIT
Dimensioning sub-command:Allows moving text in associative
dimensions without having to
explode the dimensions.
DIMTROTATE
Dimensioning sub-command:Allows rotation of the text of several
associative dimensions at once.
DIMUNDO
Dimensioning sub-command:Undoes any changes made by themost recent dimensioning
command.
DIMUPDATE
Dimensioning sub-command:Changes selected associativedimensions to use the current
dimension variables, the current
text style, and the current unitssetting.
DIMVARIABLES
Dimensioning sub-command:Lists the settings of dimension
variables associated with a
particular dimension style.
DIMVERTICAL
Dimensioning sub-command:Draws a vertical linear dimension
line
DIST Finds distance between two points can be transparent
DIVIDE Places points along a line, polyline, arc, or circle, dividing it into the specified numberof equal parts
B Uses a specified Block to dividethe object instead of a point
-
8/9/2019 AutoCAD 3D All Commands
10/34
DONUTor DOUGHNUT
Draws filled rings with specified insideand outside diameters
DRAGMODE Allows control of dynamic draggingfeature for copy and move commands
can be transparentON Makes dragging of object visible
OFF Disables visual draggingA Auto mode -- enables draggingwhen possible
DTEXT Draws text "Dynamically" so that as youenter text letters or numbers, they arevisible on the screen
J Prompts for Justification optionsS Allows you to select text styles thatare already createdA Aligns text between two points,with style-specified width factor,
AutoCAD adjusts height to keepletter proportion as designated in thestyle.C Centers text horizontallyF Fits text between two points, with aspecified height, AutoCAD adjustswidth of letters to fitM Centers text horizontally andverticallyR Right-justifies textBL Bottom-left justificationBC Bottom-center justificationBR Bottom-right justificationML Middle-left justificationMC Middle-center justificationMR Middle-right justificationTL Top-left justificationTC Top-center justificationTR Top right justification
DVIEW Allows perspective viewing of drawing CA Sets CAmera angle relative to theTarget
T Sub-option, toggles betweenangle in the X-Y plane, and angle
-
8/9/2019 AutoCAD 3D All Commands
11/34
from the X-Y plane
CL Sets Front and Back CLippingplanesD Sets Camera to Target distance
and turns on Perspective viewing
H Removes hidden lines on theselection setOFF Turns Perspective viewing offPA PAns drawing across the screenPO Allows specification of Cameraand Target pointsTA Rotates the TArget point aboutthe Camera
T Sub-option, toggles betweenangle in the X-Y plane, and anglefrom the X-Y plane
TW Twists the view around the line ofsightU Undoes a DVIEW sub-commandX Exits the DVIEW commandZ Sets lens length
DXBIN Inserts specially coded binary files intothe drawing
DXFIN Loads a drawing interchange file (DXFfile) to be able to read a drawing filecreated by another CAD program
DXFOUT Writes a drawing interchange file (DXFfile) to be able to use an AutoCADdrawing in another CAD program
B Writes binary DXF fileE Outputs selected entities only
(0-16) Floating point precision
EDGESURF Constructs a 3d Polygon mesh
approximating a Coons surface patchinterpolated between 4 adjoining edges
ELEV Sets Elevation (distance above theground plane) and Thickness (extrudeddistance from the bottom of an object tothe top) for subsequently drawn entities
ELLIPSE Draws ellipses C Allows specification of Center pointof ellipse rather than first axis
-
8/9/2019 AutoCAD 3D All Commands
12/34
endpointR Allows specification of eccentricityrotation rather than length of secondaxisI Draws Isometric circle in currentisoplane
END Saves the drawing and exits AutoCADback to DOS or WINDOWS
ERASEorE
Erases selected entities from the drawing
EXPLODE Separates a block, dimension or hatchpattern into its constituent entities or
makes a polyline into a series of straightlines. In the case of a block that isexploded, if it was originally drawn on the0 layer, it returns to that layer, regardlessof the layer it was inserted on, and it losesits referential connection to the originalblock. In the case of a dimension or hatchpattern that has been exploded, theirparts go back to the 0 layer, and areassigned the logical color (BYBLOCK)regardless of the layer they were drawnon. In the case of an exploded polyline, itloses any width it may have had.
EXTEND Lengthens a line, arc, or polyline to meeta specified "boundary edge"
U Undoes effect of last Extendcommand
FILES Allows DOS disk and file utility tasks to bedone through a dialogue box
can be transparent
FILL Controls whether solids, traces, widepolylines, and donuts will be filled with ink.Note that fill is only visible when viewingthese entities in plan (perpendicular toline of sight)
can be transparentON entities visually filled with solidinkOFF entities not visually filled but areshown in outline only
FILLET Constructs an arc of specified radiusbetween two lines, arcs, circles, or willcreate arcs of the specified radius at thevertices of a polyline. Radius of the arc tobe constructed may be set to 0, which willmake a sharp corner
P Fillets an entire Polyline at theverticesR Allows setting of the fillet radius.Default value is 0. Radius remainsset until changed again
FILMROLL Generates a file for rendering byAutoShade, a separate program
-
8/9/2019 AutoCAD 3D All Commands
13/34
GRAPHSCR A "toggle." Flips the display on single-screen systems (most of them) from text-screen to graphics-screen, and vice-versa.
can be transparent
GRID Displays a rectangular grid of white dots
on the screen at a specified X- and Y-spacing
can be transparentON Turns grid display onOFF Turns grid display offS Locks grid spacing to SNAPresolutionA Sets grid aspect (different X- andY- spacings
Sets grid spacingfor both X- and Y-coordinates Sets gridspacing to multiple "X" ofsnap spacing
HANDLES Assigns a unique, permanent number toeach entity of the drawing
ON Enables HandlesDESTROY Discards all entityHandles
HATCH Allows drawing of cross-hatching andpattern filling
uses hatch patternname from library file to filldesignated area with a pseudo-blockhatch entity -- can be reduced to
individual lines and points byEXPLODEing it. uses hatch patternname from library file to filldesignated area with individual linesand points, not a blockU "User-defined" hatch pattern drawnof parallel lines with a specifieddistance between, at a specifiedangle, and either single-hatching ordouble (cross)-hatching? Lists names of available hatchpatterns or U can be followedby a comma and the following sub-commands:
I Ignores any boundaries insidethe outermost boundary
-
8/9/2019 AutoCAD 3D All Commands
14/34
N Normal style of selectingboundaries with alternatinghatched and unhatched nestedareasO Hatches outermost boundary
area only
HELPor?
Displays a list of all valid commands anddata entry options, or obtains help for aspecific command or prompt
can be transparentif invoked while another command is inprocess, it will assume that you want help onthat command
HIDE Regenerates a 3d visual image of thedrawing with hidden lines removed
ID Displays the X,Y, and Z coordinates of apoint selected
can be transparent
IGESIN Loads an IGES interchange file
IGESOUT Writes an IGES interchange file
INSERT Inserts a previously created block or drawing file into the current drawing
Inserts a filenamefrom the default directory into thecurrent drawing, assuming thatthere is no block by that name inthe current drawing=Creates a block in the currentdrawing with the same name as
the file
Inserts a block in itsconstituent entities rather than asa block -- also called a "StarBlock" or Pre-exploded block
C Reply to X scale prompt -- allowsscale to be specified by two points(Corner specification of scale)XYZ Reply to X scale prompt --allows specification of X, Y, and Zscales~ Displays a file dialogue box? Lists names of defined blockswithin the current drawing
ISOPLANE Selects the plane of an isometric grid tobe the current plane for an orthogonaldrawing
can be transparentL Left plane
-
8/9/2019 AutoCAD 3D All Commands
15/34
R Right planeT Top plane
Toggle to next plane inseries, Left, Right, and Top
LAYERorLA
Creates named drawing layers, assignscolor and linetype properties to thoselayers, allows layers to be frozen andthawed, locked and unlocked, and allowscurrent layer to be set
can be transparentC Assigns color to named layerF Freezes named layers (commaseparates a list of layers to be frozen,* can be used as a wildcard) --current layer cannot be frozenL Assigns linetype to named layerLO Locks named layer
M Makes a layer -- creates a newlayer and makes it the current layerN Creates new layers with namednames (comma separates a list oflayers to be created, * can be usedas a wildcard)ON Turns named layers on if theywere turned off (comma separates alist of layers to be turned on, * can beused as a wildcard)OFF Turns named layers off if they
were turned on (comma separates alist of layers to be turned off, * can beused as a wildcard)
LAYERorLA(Continued)
S Sets named layer as the currentlayerT Thaws named layers which arefrozen (comma separates a list oflayers to be frozen, * can be used asa wildcard)U Unlocks named layer? Gives information about namedlayers, * can be used as a wildcard
LIMITS Changes the imaginary boundaries of thedrawing, and controls whether drawingcan be made outside of the boundaries. IfLimit-checking is ON, drawing cannot bedone outside of limits.
can be transparent Sets lower-left andupper -right drawing limits
ON Enables limit-checking
-
8/9/2019 AutoCAD 3D All Commands
16/34
OFF Disables limit-checking
LINEorL
Draws straight lines In reply to From Point:prompt, line begins at end ofprevious line or arc
C In reply to To point: prompt,closes the polygon back to first"From Point"U In reply to To point: prompt,undoes last line segment
LINETYPE A linetype is a series of lines and spaces-- dots and dashes --Sets the current linetype to be used for allsubsequent entities to be drawn, allowscreation of new linetype definitions, andallows loading of previously created
linetypes from DOS files
can be transparent? Lists a linetype library , or namedlinetypes which are loadedC Creates a linetype definitionL Loads a previously creatredlinetype definitionS Set current linetype -- note that thecurrent linetype should always be setto the logical linetype "BYLAYER"
LIST Lists all information about selected object,such as what type of entity it is (Line, Arc,Circle, Block, etc.), what layer it is on,what color it is, the location of itsendpoints, what its Z-axis (elevation),what its thickness is, etc.
LOAD Loads a file of user-defined shapes to beused with the Shape command
? Lists the names of loaded Shapefiles
LTSCALE Sets scale factor to be applied to alllinetypes within the drawing
can be transparent
MEASURE Places points (or, optionally, Blocks) atintervals along a selected line, polyline,arc or circle. The interval distance is givenby the user. If points are used as themarker to be placed along the entity, theyare not visible unless the Point type is setto type 3 with the PDMODE command.
B specifies that a defined Block is tobe used as a marker instead of apoint.
MENU Loads a Menu file into the menu areas(Screen, pull-down, tablet, and button)
MINSERT Inserts multiple copies of a Block in arectangular pattern (word stands for"Multiple Insert." The entire array createdthen becomes a Block.
fname Loads fname and forms arectangular array of the resultingBlockfname=f Creates Block fnamefrom file f and forms a
-
8/9/2019 AutoCAD 3D All Commands
17/34
rectangular array
? Lists names of defined Blockswithin the drawingC (as a reply to X scale prompt)
specifies scale via two selectedpoints ("Corner" specification ofscale)XYZ (as a reply to X scale prompt)readies Minsert for X, Y, and Zscales)- displays a file dialogue box
MIRROR Reflects designated entities about a user-specified axis
MOVEorM
Moves designated entities to another
location
MSLIDE Makes a slide from the current display.Slide shows the drawing only, and not theUCSICON, the Toolbar, the Aerial View ormenus.
MSPACE Switches to Model Space
MULTIPLE Causes the next command to repeat untilcancelled
MVIEW Creates and controls Viewports ON Turns selected Viewports onand causes the Model to beregenerated in the selectedViewports.OFF Turns selected Viewportsoff and causes Model to be notdisplayed in the selectedViewports.Hideplot Causes hidden lines tobe removed in selectedViewports during Paper Spaceplotting.Fit Creates a single Viewport tofit the current Paper Space view2 Creates 2 Viewports inspecified area or fit to the currentPaper Space view.
-
8/9/2019 AutoCAD 3D All Commands
18/34
3 Creates 3 Viewports inspecified area or fit to the currentPaper Space view.4 Creates 4 Viewports inspecified area or fit to the current
Paper Space view.Restore Translates viewportconfigurations saved with theVPORTS command intoindividual Viewport entities inPaper Space. Creates a newViewport within the areaspecified by 2 points.
Sub-options to the "2" Option:Horizontal Creates a horizontaldivision between the 2 newViewportsVertical Creates a verticaldivision between the 2 newViewports.
Sub-options to the "3" Option:Above Specifies placement oflarger Viewport above the other 2
Below Specifies placement of
larger Viewport below the other 2
Horizontal Splits area into thirdshorizontallyLeft Specifies placement oflarger Viewport to the left of theother 2
Right Specifies placement of thelarger Viewport to the right of theother 2Vertical Splits area into thirdsvertically
NEW Creates a new drawing. When selectedfrom a menu or typed in at the Command:prompt, this command brings up adialogue box which allows setting a namefor the new drawing by typing the name inthe box, selection of a "prototype" drawingor typing a name of the new drawing and
-
8/9/2019 AutoCAD 3D All Commands
19/34
then an = sign and then the name of adrawing to be used as a prototype.
OFFSET Creates a new line, polyline arc or circleparallel to the entity and at a specifieddistance from it.
specifies offsetdistanceT "Through" allows specificationof a point through which theoffset line, polyline, arc or circleis to pass
OOPS restores erased entities, or entities madeinto a Block
OPEN Opens an existing drawing
ORTHO Constrains drawing so that only linesaligned with the grid can be drawn --usually means only horizontal or verticallines, however, if the crosshairs are
rotated through the "Snap" "Rotate"command sequence, the lines drawn areconstrained to being parallel with thecrosshair rotation. Constraint can beoverridden by snapping to a point or byentering exact coordinates for endpoints.
can be transparent
OSNAP Enables points to be precisely located onreference points of existing objects. Thisis the so-called "Running Mode" ofOSNAP, which sets selection method torun continuously until set to NON (none)or until overridden by selecting another
"Interrupt Mode" OSNAP method from thecursor menu. Combinations of OSNAPmethods can be used by selecting aseries of options separated by commas.For instance, if you want ot always pickeither endpoints or intersection pointswhen locating endpoints of lines, youwould issue the command as follows:OSNAP END,INT
can be transparentCEN CENter of arc or circleEND closest ENDpoint of arc orlineINS INSertion point of Text orBlockINT INTersection of line, arc, orcircleMID MIDpoint of line, arc,rectangle side, or polygon sideNEA NEArest point selected byaperture on line, polyline, arc, orcircleNOD NODe (another name for aPoint)NON NONe -- used when a"Running OSNAP" is on totemporarily turn off OSNAPselectionPER PERpendicular point to line,arc or circle -- when used with an
-
8/9/2019 AutoCAD 3D All Commands
20/34
arc or circle it will draw a line tothe surface of the arc or circleheading toward the center pointQUA QUAdrant point of arc orcircle (top, bottom, right or left
side)QUI QUIck mode -- this is amodifier to one of the otherOSNAP options -- it will find thefirst point that meets therequirements, not necessarily theclosest point to the aperture.TAN TANgent point to arc orcircle
PAN Moves the display window withoutchanging the magnification factor
can be transparent
PEDIT Allows editing of polylines which arealready drawn
C Closes an open polylineD Decurves, or returns a Splinecurve to its control frame or series ofconnected straight linesE Edit verticesF Fits curve to a polyline -- makes aseries of straight lines into a curvewhich will pass through the verticesJ Joins a line or arc or another
polyline to an open polylineL Toggles linetype generation to beeither a continuous pattern of dashespassing through the vertices, or apattern which starts and ends at eachvertexO Opens a closed polylineS Uses the polyline vertices as aframe for a Spline Curve -- type ofSpline Curve is set by the Variable"Splinetype."U Undoes one editing operationW Sets a uniform width for thePolyline
PEDIT (Continued) Vertex Editing Options:B Sets first vertex for Break
-
8/9/2019 AutoCAD 3D All Commands
21/34
G "Go" -- performs a Break orStraighten operationI Inserts a new vertex after currentoneM Moves current vertex
N Makes the Next vertex currentP Makes the Previous vertex currentR Regenerates the PolylineS Sets first vertex for StraightenT Sets tangent direction for currentvertexW Sets new width for the following
segment
X Exits vertex editing, or cancelsBreak and Straighten
PEDIT Mesh Allows editing of Meshes which arealready drawn
D De-smooth -- restores originalmeshE Edits mesh verticesM Opens (or closes) the mesh in theM directionN Opens (or closes) the mesh in the
N direction
S Fits a smooth surface as definedby the Variable SURFTYPEU Undoes one editing operationX Exits Pedit command
Vertex Editing Options:D Makes previous vertex Down in Mdirection currentL Makes previous vertex to Left in Ndirection currentM Moves the marked vertexN Makes the Next vertex currentP Makes the Previous vertex currentR Makes next vertex to Right in N
-
8/9/2019 AutoCAD 3D All Commands
22/34
direction currentRE Redisplays the polygon meshU Makes the next vertex Up in Mdirection currentX Exits vertex editing
PFACE Creates a 3D mesh of arbitrary complexityand surface characteristics
PLAN Puts the display in "Plan" view, withVpoint set to 0,0,1, relative to either thecurrent UCS, a specified UCS, or theWorld Coordinate System
C Establishes the Plan view of theCurrent UCSU Establishes the Plan view of aspecified UCSW Establishes the Plan view of theWorld Coordinate System
PLINE Draws a 2D polyline, which are connectedline or arc segments with user-determinedwidth and taper
H sets the half-width of the polylinesegmentsU Undoes previous segmentW sets the width of polylinesegments
Exits the Pline command
The following options are available only aslong as you are drawing in Line mode:
A Switches to the Arc mode to allowintegration of arcs into the polylineC Closes the polyline with straightsegmentL Segment length (continuesprevious segment)
The following options are available only aslong as you are in the Arc mode:
A Included angleCE Center PointCL Closes with arc segmentD Starting directionL Chord length, or switches to linemodeR Radius
-
8/9/2019 AutoCAD 3D All Commands
23/34
S Second point of 3-point arc
PLOT Plots a drawing to a plotting device, aprinter, or to a "Plot File."
POINT Draws single points. Appearance of the
points is set by the Variable PDMODE
POLYGON Draws regular polygons with a specifiednumber of sides. Polygons are Polylineentities.
E Specifies size and rotation ofpolygon by picking endpoints of oneedgeC Circumscribes polygon around acircleI Inscribes polygon within a circle
PSDRAG Controls the appearance of an importedPostscript image that is being "dragged"(that is, positioned and scaled) into place
by the PSIN command
0 Only the images bounding box isdisplayed as you drag it into place1 The complete rendered PostScriptimage is displayed as you drag it intoplace
PSFILL Fills 2D Polyline outlines with PostScriptfill patterns defined in the ACAD.PSF file
. Entering a period results in no fillpattern? Lists the fill patterns defined inACAD.PSF file
PSIN Imports Encapsulated PostScript (EPS)files
PSOUT Exports the current view of your drawing
to an Encapsulated PostScript (EPS) file
PSPACE Switches to Paper Space -- this will workonly if the Variable TILEMODE is set to 0.
PURGE Removes unused Blocks, Text Styles,Layers, Linetypes, and Dimension Stylesfrom current drawing
A Purges All unused named objectsB Purges unused BlocksD Purges unused DimstylesLA Purges unused LAyersLT Purges unused LinetypesSH Purges unused Shape filesST Purges unused Text Styles
QSAVE Saves the current drawing "Quickly"without requesting a filename (as long asfile has already been given a name)
QTEXT Controls display of text -- command ON Lines of text displayed as
-
8/9/2019 AutoCAD 3D All Commands
24/34
stands for "QuickTEXT" rectangles
OFF Lines of text displayed as text
QUIT Exits AutoCAD -- if the current drawinghas not been Saveds in its current state, a
dialogue box will appear asking if youwant to Save the drawing, Discard thechanges, or Cancel the Exit command
RECOVER Attempts to recover damaged or corrupted drawings
REDEFINE Restores a built-in command which mayhave been deleted by the commandUNDEFINE
REDO Reverses a previous command if it was Uor UNDO
REDRAW Refreshed or cleans up the currentViewport
can be transparent
REDRAWALL Redraws all viewports can be transparent
REGEN Regenerates the current Viewport byrecalculating the vector locations of allendpoints
REGENALL Regenerates all Viewports
REGENAUTO Controls automatic regenerationperformed by other commands
can be transparentON Allows automatic regensOFF Prevents automatic regens
REINIT Allows the I/O ports, the digitizer, thedisplay, the plotter, and the ACAD.PGPfile to be reinitialized. This commandallows selection of what you want toreinitialize through a dialogue box. It ismost useful when you make changes "onthe fly" to the ACAD.PGP file and want toimmediately make use of those changeswithout having to exit AutoCAD and getback into it.
RENAME Changes the names associated with TextStyles, Layers, Linetypes, Blocks, Views,User Coordinate Systems, ViewportConfigurations, and Dimension Styles.
B Renames BlocksD Renames Dimension StylesLA Renames LayersLT Renames LinetypesS Renames Text Styles
-
8/9/2019 AutoCAD 3D All Commands
25/34
U Renames UCSVI Renames ViewsVP Renames Viewports
RESUME Resumes an interrupted command script can be transparent
REVSURF Creates a 3D polygon meshapproximating a surface of revolution, byrotating a curve around a selected axis
ROTATE Rotates existing objects parallel to thecurrent UCS
RSCRIPT Restarts a command script from thebeginning
SAVE Requests a filename and saves thedrawing
SAVEAS Same as SAVE, but also renames thecurrent drawing and keeps the new namecurrent
SCALE Alters the size of existing objects R Resizes with respect to a referencesize
SCRIPT Runs a command script. A script is a anASCII file which contains variouscommands that when executed operates
just as if you typed in those commands,one by one, by hand
can be transparent
SELECT Groups objects into selection sets for usein subsequent commands
SETVAR Allows you to display or change thesetting of system variables. Thiscommand is no longer necessary tochange the value of system variables.You now can type in the name of thevariable to change it.
can be transparent? Lists specified (or all) systemvariables and their settings
SH Short for "SHell." Allows access tointernal operating system (DOS)commands. Once SH is invoked, followedby two s, the DOS Prompt will bedisplayed, so you can enter any DOScommand. To get back to AutoCAD,simply type EXIT at the DOS prompt.
SHADE Shades 3D model in current Model SpaceViewport
SHAPE Draws predefined Shapes ? Lists available Shape names
-
8/9/2019 AutoCAD 3D All Commands
26/34
-
8/9/2019 AutoCAD 3D All Commands
27/34
however.
STYLE Creates named Text styles, with user-selected combinations of font, height,mirroring, obliging, and horizontal scaling.
can be transparent? Lists specified (or all) currentlydefined text styles
TABLET Aligns the digitizing tablet withcoordinates of a paper drawing toaccurately copy it with AutoCAD
ON Turns Tablet Mode ON (but it hasto be CALibrated first)OFF Turns Tablet Mode OFFCAL Calibrates Tablet for use -- setsthe distance to be used to copy thedrawing to an accurate scaleCFG Configures tablet menus andpointing area
TABSURF Creates a polygon mesh approximating a
general tabulated surface defined by apath and a direction vector
TEXT Draws text characters of any size withselected styles
J Prompts for justification optionsS Lists or selects text styleA Aligns text between two points,with style-specified width factor,AutoCAD computes approximateheight proportional to length of textlineC Centers text horizontally about a
defined pointF Fits text between two points, withspecified height, AutoCAD computesapproximate width factor to fill thedistance between the two pointsM Centers text horizontally andvertically about a defined pointR Right-justifies textBL Bottom Left justificationBC Bottom Center justificationBR Bottom Right justificationML Middle Left justificationMC Middle Center justificationMR Middle Right justification
-
8/9/2019 AutoCAD 3D All Commands
28/34
TL Top Left justificationTC Top Center justificationTR Top Right justification
TEXTSCR A "toggle." Flips the display on single-screen systems (most of them) from text-screen to graphics-screen, and vice-versa.
can be transparent
TIME Displays drawing creation and updatetimes, and permits control of an elapsedtimer.
can be transparentD Displays current timesON Starts user elapsed timerOFF Stops user elapsed timerR Resets user elapsed timer
TRACE Draws solid filled lines of specified width.Has mostly been superseded by thePLINE command.
TREESTAT Displays information on the drawing'scurrent spatial index, such as the numberand depth of nodes in the drawingdatabase.
TRIM Erases a portion of selected entities thatcross a specified "cutting edge"
U Undoes last trim operation
U Reverses the effect of the previous
command
UCS Defines or modifies the current User Coordinate System
D ("Delete") Deletes one or moresaved coordinate systemsE ("Entity") Sets a UCS with thesame extrusion direction as that ofthe selected entityO ("Origin") Shifts the origin of thecurrent coordinate systemP ("Previous") Restores the PreviousUCSR ("Restore") Restores a previouslysaved UCSS ("Save") Saves the current UCSV ("View") Establishes a new UCSwhose Z-axis is parallel to the currentviewing direction
-
8/9/2019 AutoCAD 3D All Commands
29/34
W ("World") Sets the current UCS tothe World Coordinate SystemX Rotates the current UCS aroundthe X-axisY Rotates the current UCS aroundthe Y-axisZ Rotates the current UCS aroundthe Z-axisZA Defines a UCS using an originpoint and a point on the positiveportion of the Z-axis3 Defines a UCS using an originpoint, a point on the positive portionof the X-axis, and a point on thepositive Y-portion of the XY plane? Lists specified saved coordinatesystems
UCSICON Controls visibility and placement of theUser Coordinate System Icon, whichgraphically indicates the origin andorientation of the current UCS. Theoptions normally affect only the currentviewport.
A Changes settings of all activeviewportsN ("NoOrigin") Displays theUCSICON at the lower-left corner ofthe viewport (i.e., not at the Origin)OR ("ORigin") Displays theUCSICON at the origin of the currentUCS, if possible (if the origin point is
not within the current viewport, thelocation of the UCSICON defaults tothe lower-left corner of the viewport)OFF Turns the UCSICON offON Turns the UCSICON on
UNDEFINE Deletes the definition of a built-inAutoCAD command
UNDO Reverses the effect of multiplecommands, and provides control over the"Undo" facility
Undoes the of most recent commands inreverse order
A ("Auto") Controls treatment ofmenu items as UNDO "Groups"B ("Back") Undoes back to previousUNDO "Mark"C ("Control") Enables/disables theUNDO feature
-
8/9/2019 AutoCAD 3D All Commands
30/34
E ("End") Terminates an UNDOGroup (a sequence to be treated asone command)G ("Group") Begins an UNDO Group(a sequence to be treated as one
command)M ("Mark") Places "marker" in UNDOfile (for use with "Back")
Control Sub-OptionsAll Enables the full UNDOfeatureNone Disables U and UNDOentirely, and discards anyprevious UNDO informationsaved earlier in the editing
sessionOne Limits U and UNDO to asingle operation
UNITS Selects coordinate and angle displayformats and precision
can be transparent
VIEW Saves the current graphic display andspace as a named view, or restores asaved view and space to the display
can be transparentD Deletes a named viewR Restores named view to screenS Saves current display as namedviewW Saves specified Window asnamed view? Lists specified named views
VIEWPORTSorVPORTS
Used in Model Space only, and has beensuperseded by Paper Space Vports,created with the MVIEW command.Divides the AutoCAD graphics displayinto multiple viewports, each of which cancontain a different view of the current
drawing (maximum of 4 "tiled" viewportsper viewport)
D Deletes a saved viewportconfigurationJ Joins (merges) two viewportsR Restores a saved viewport
configurationS Saves the current viewportconfigurationSI ("SIngle") Displays a SIngleviewport filling the entire graphicsarea2 Divides the current viewport into 2
-
8/9/2019 AutoCAD 3D All Commands
31/34
viewports3 Divides the current viewport into 3viewports4 Divides the current viewport into 4
viewports
? Lists the current and savedviewport configurations
VIEWRES Allows you to control the precision andspeed of circle and arc drawing on themonitor by specifying the number of sidesin a circle. Acts like an AutoCAD variable.Recommend that it be set to 2000.
VPLAYER Sets viewport visibility for new andexisting layers
? Lists layers frozen in a selectedviewportF ("Freeze") Freezes specified layersin selected viewportsT ("Thaw") Thaws specified layers inselected viewportsR ("Reset") Resets specified layersto their default visibilityN ("Newfrz") Creates new layers thatare frozen in all viewportsV ("Vpvisdflt") Sets the defaultviewport visibility for existing layers
VPOINT Selects the viewpoint for a 3Dvisualization
R Selects viewpoint via tworotation angles Selects viewpoint via agraphic compass and axis tripodwhich appears on the screen Specifies x, y, and zrelative coordinates of viewpoint
VSLIDE Displays a previously created slide file views slide withname of "filename.SLD"*filename preloads slidewhich the next commandVSLIDE will view
WBLOCK Writes selected entities or previouslycreated Block to a drawing file
writes specifiedentities to "filename.DWG"= filename.DWG to be created issame as the entities included in apreviously defined Block by the
-
8/9/2019 AutoCAD 3D All Commands
32/34
same name* writes entire drawing to thefilename.DWG and purges allunreferenced blocks, layers,linetypes, text and dimensioning
styles writes selected objects
XBIND Makes portions of an Xref a permanentpart of your drawing
B ("Block") Makes a block in the Xrefa permanent part of your drawingD ("Dimstyle") Makes a dimstyle inthe Xref a permanent part of yourdrawingL ("Layer") Makes a layer in the Xrefa permanent part of your drawingLT ("LType") Makes a Ltype in theXref a permanent part of yourdrawingS ("Style") Makes a text style in theXref a permanent part of yourdrawing
XREF Allows you to work with other AutoCADdrawings without adding thempermanently to your drawing and withoutaltering their contents
A ("Attach") "Attaches" a new Xref tothe drawing or updates an Xref that isalready attachedB ("Bind") Makes an Xref apermanent part of your drawingD ("Detach") Removes an Xref fromyour drawingP ("Path") Allows you to view andedit the filename path (directory andsub-directory) that AutoCADsearches when loading a particularXrefR ("Reload") Updates one or moreXrefs at any time? Lists Xrefs in your drawing and thedrawing associated with each one
ZOOM Enlarges or reduces the displaymagnification of the drawing, withoutchanging the actual size of the entities
can be transparent multiplier from originalmagnification multiplier fromcurrent magnification
-
8/9/2019 AutoCAD 3D All Commands
33/34
multiplier ofmagnification relative to paperspace -- used for plotting to getright plot scale in each viewport
A ("All") fills limits of drawing to
screenC ("Center") makes picked point thecenter of the screenD ("Dynamic") makes an adjustiblerectangular lens appear on thescreen which is capable of beingmade smaller or larger and moved todifferent positions over the drawingand once set by the user, thedrawing will quickly zoom to thelocation and magnification set for thelens. This sub-command is no longer
useful because all computers havevery fast zooms naturally now.E ("Extents") makes the farthestedges of the actual visible drawing fillup the graphics screenL ("Lower-Left") makes the pointpicked become shoved to the lower-left corner of the graphics screenP ("Previous") zooms back towhatever the last zoom, previous to
the current zoom was -- AutoCADstores about 10 of these, so you canwalk backward in zoom magnification10 times
V ("Virtual Screen") makes thelargest area available to the graphicscard fill the graphics screen -- thisvaries with the quantity of graphicsRAM that your graphics card hasW ("Window") asks you to pick thelower left corner and the upper rightcorner of a zoom window and then
fits that window to the graphicsscreen
3DFACE Draws flat planes in 3D space with either 3 corners or 4 corners (3 sided or 4 sidedflat planes). These are used to hideobjects behind them in space to createthe illusion of a solid object. 3DFACEscan also be shaded using the SHADEcommand, in which case the entire plane
I ("Invisible") this is used by typing inthe letter "I" just before picking acorner point for the 3DFACE, and itwill make the edge of the 3DFACEdrawn from that point to the next one"Invisible" (that is, it will not be shownas a line on the drawing). This is
-
8/9/2019 AutoCAD 3D All Commands
34/34
takes on the color assigned to its edges.Normally (without using the HIDE orSHADE commands, 3DFACEs aretransparent, which means that objectsbehind them in space are visible throughthem, and they appear as "wireframes."
important when joining several3DFACEs together to cover acomplex, multi-faceted surface,where you do not want the "seams"of the 3DFACEs to show in the finaldrawing. The visibility of edges of
3DFACEs can further be turned on oroff by the AutoCAD variable"SPLFRAME." When SPLFRAME isset to 1 ("on"), both edges whichhave been made "Invisible" as wellas normal, visible edges are shownon the drawing. When SPLFRAME isset to 0 ("off"), Invisible edges are notshown. The purpose of sometimeswanting to see invisible edges is thatyou may want to move, stretch, orcopy the 3DFACE and if its edgesare invisible, you cannot select them
fopr modification. You can only selecta 3DFACE by picking on a visibleedge.
3DMESH Draws a 3D polygon mesh by specifyingits size, in terms of the number of faces ineach direction (called M and N directions),and the location in 3D space of eachvertex (the corner of a face) in the mesh.
3DPOLY Creates a 3D polyline C Closes the polyline back to the firstpointU Undoes (deletes) the last segment
entered Exits 3DPOLY command