autodesk vault quick start

8/3/2019 Autodesk Vault Quick Start

http://slidepdf.com/reader/full/autodesk-vault-quick-start 1/4

Step 3: Congure Windows Vista rewall (continued).

In the Windows Firewall dialog1.box, on the Exceptions tab, click

Add Port.

In the Add a Port dialog box, enter2.the ollowing inormation:

Name: VaultPort: 80

Ensure that TCP is checked.3.Click OK.4.

Step 4: Run the Vault server installation media.

• Run the installation or the Vault server and accept all t he deault settings.

• I you want to congure the installation location o the Vault server’s database select

Congure, otherwise accept the deault.

For Windows Vista (c0ntinued)

Autodesk is a registered trademark o Autodesk, Inc., and/or its subsidiaries and/or aliates in the USA and/or other

countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the

right to alter product oferings and specications at any time without notice, and is not responsible or typographical or

graphical errors that may appear in this document.

© 2009 Autodesk, Inc. All rights reserved.

463B1-050000-PC02A



Ste

Ste

For W

Step 2: Load Internet Inormation Services and ASP.NET.

I Internet Inormation Services

(IIS) is not loaded select Add/Remove Windows Components,

listed on the let side o the Addor Remove Programs dialog box.

Check the box next to ASP.Net.This causes the boxes or Enable

network COM+ access and

Internet Inormation Services(IIS) to be checked as well.

Click OK to load the compo-nents.

Tip: I IIS is loaded and not

being used or any applications,remove IIS and reinstall it.


• Run the installation or the Vault server and accept all the deault settings. • I you want to congure the installation location o the Vault server’s database select


Note: For additional inormation on rewalls, see the Autodesk Vault 2010 Implementation Guide.

For Windows Server® 2003 and 2008

Step 2: Load Internet Inormation Services.

I Internet Inormation Services

(IIS) is not loaded, select Add/Remove Windows Components,

listed on the let side o theAdd or Remove Programs dialog

box. Select Internet InormationServices (IIS) by checking the box

next to the application.

Step 3: Congure Windows XP SP2 rewall.

On the Windows start menu, click1.

Control Panel.Double-click Security Center and2.

then Windows Firewall.In the Windows Firewall dialog3.

box, on the Exceptions tab, click

Add Port.In the Add a Port dialog box, enter4.

the ollowing inormation:Name: Vault

Port: 80Ensure that TCP is checked.5.

Click OK.6.


• Run the installation or the Vault server, and accept all the deault settings.

• I you want to congure the installation location o the Vault server’s database select


Note: For additional inormation on rewalls,see the Autodesk Vault 2010 ImplementationGuide.

Note: For additional inormation on

conguring IIS, see the Autodesk Vault2010 Implementation Guide.

For Windows XP



Autodesk, Autodesk Inventor, and Inventor are registered trademarks or trademarks o Autodesk, Inc., and/or its

subsidiaries and/or aliates in the USA and/or other countries. All other brand names, product names, or trademarks

belong to their respective holders. Autodesk reserves the right to alter product oerings and specifcations at any time

without notice, and is not responsible or typographical or graphical errors that may appear in this document.

© Autodesk, Inc. All rights reserved.

463B1-050000-PC03A

Step 6: Finish the installation.

When the installation is fnished,

you are prompted to start the server

console. Do this to migrate the olddatabase.

Step 7: Migrate the existing database.

The frst time you run the serverconsole, whether it is done

immediately ater installation or at alater time, you must select Yes when

prompted to migrate the old database.

Note: Migration time can vary based on the number o fles in your vault and the location o your fles.Allow the migration to complete without interruption. Larger vaults can take extended amounts o timeto migrate. The best way to gauge this time is to perorm a test migration on a test server.



Step 3: Restore the backup on a test server (optional).

Using the Autodesk Vault server console, on the

Tools menu, select Backup and Restore. In the

Backup and Restore dialog box, select Restore,then click Next.

Select Full Restore and check Deault

Restore Location or the databaselocation. Select a restore location

where you can copy the backed upfle store, which is dierent rom the

original fle store. This will ensure thatyou do not overwrite the original fles.

Click the Finish button to start the

restore operation.

Note: Veriying your backup by restoring it to atest server is recommended but not necessary.

Step 2: Create a ull backup o the existing vault.

Using the Autodesk Vault server console, on the

Tools menu, select Backup and Restore. In the

Backup and Restore dialog box, select Backup,and then click Next.

Select Full Backup and check Validate

the backed up fles. Select a backuplocation where you can copy the

backed up fles to a test server orrestoration and validation. Click Finish

to start the backup.

Note: I you are using Content Center rom aprevious version o Autodesk Inventor,® backup the existing Content Center libraries.

Ste

• Un

gra

• Un

The uo tim

Ale

Ste

The n

to co

Tip: P

ing y

autodesk vault quick start

Documents