Download - Autodesk Vault Quick Start
8/3/2019 Autodesk Vault Quick Start
http://slidepdf.com/reader/full/autodesk-vault-quick-start 1/4
Step 3: Congure Windows Vista rewall (continued).
In the Windows Firewall dialog1.box, on the Exceptions tab, click
Add Port.
In the Add a Port dialog box, enter2.the ollowing inormation:
Name: VaultPort: 80
Ensure that TCP is checked.3.Click OK.4.
Step 4: Run the Vault server installation media.
• Run the installation or the Vault server and accept all t he deault settings.
• I you want to congure the installation location o the Vault server’s database select
Congure, otherwise accept the deault.
For Windows Vista (c0ntinued)
Autodesk is a registered trademark o Autodesk, Inc., and/or its subsidiaries and/or aliates in the USA and/or other
countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the
right to alter product oferings and specications at any time without notice, and is not responsible or typographical or
graphical errors that may appear in this document.
© 2009 Autodesk, Inc. All rights reserved.
463B1-050000-PC02A
8/3/2019 Autodesk Vault Quick Start
http://slidepdf.com/reader/full/autodesk-vault-quick-start 2/4
Ste
Ste
For W
Step 2: Load Internet Inormation Services and ASP.NET.
I Internet Inormation Services
(IIS) is not loaded select Add/Remove Windows Components,
listed on the let side o the Addor Remove Programs dialog box.
Check the box next to ASP.Net.This causes the boxes or Enable
network COM+ access and
Internet Inormation Services(IIS) to be checked as well.
Click OK to load the compo-nents.
Tip: I IIS is loaded and not
being used or any applications,remove IIS and reinstall it.
Step 3: Run the Vault server installation media.
• Run the installation or the Vault server and accept all the deault settings. • I you want to congure the installation location o the Vault server’s database select
Congure, otherwise accept the deault.
Note: For additional inormation on rewalls, see the Autodesk Vault 2010 Implementation Guide.
For Windows Server® 2003 and 2008
Step 2: Load Internet Inormation Services.
I Internet Inormation Services
(IIS) is not loaded, select Add/Remove Windows Components,
listed on the let side o theAdd or Remove Programs dialog
box. Select Internet InormationServices (IIS) by checking the box
next to the application.
Step 3: Congure Windows XP SP2 rewall.
On the Windows start menu, click1.
Control Panel.Double-click Security Center and2.
then Windows Firewall.In the Windows Firewall dialog3.
box, on the Exceptions tab, click
Add Port.In the Add a Port dialog box, enter4.
the ollowing inormation:Name: Vault
Port: 80Ensure that TCP is checked.5.
Click OK.6.
Step 4: Run the Vault server installation media.
• Run the installation or the Vault server, and accept all the deault settings.
• I you want to congure the installation location o the Vault server’s database select
Congure, otherwise accept the deault.
Note: For additional inormation on rewalls,see the Autodesk Vault 2010 ImplementationGuide.
Note: For additional inormation on
conguring IIS, see the Autodesk Vault2010 Implementation Guide.
For Windows XP
8/3/2019 Autodesk Vault Quick Start
http://slidepdf.com/reader/full/autodesk-vault-quick-start 3/4
Autodesk, Autodesk Inventor, and Inventor are registered trademarks or trademarks o Autodesk, Inc., and/or its
subsidiaries and/or aliates in the USA and/or other countries. All other brand names, product names, or trademarks
belong to their respective holders. Autodesk reserves the right to alter product oerings and specifcations at any time
without notice, and is not responsible or typographical or graphical errors that may appear in this document.
© Autodesk, Inc. All rights reserved.
463B1-050000-PC03A
Step 6: Finish the installation.
When the installation is fnished,
you are prompted to start the server
console. Do this to migrate the olddatabase.
Step 7: Migrate the existing database.
The frst time you run the serverconsole, whether it is done
immediately ater installation or at alater time, you must select Yes when
prompted to migrate the old database.
Note: Migration time can vary based on the number o fles in your vault and the location o your fles.Allow the migration to complete without interruption. Larger vaults can take extended amounts o timeto migrate. The best way to gauge this time is to perorm a test migration on a test server.
8/3/2019 Autodesk Vault Quick Start
http://slidepdf.com/reader/full/autodesk-vault-quick-start 4/4
Step 3: Restore the backup on a test server (optional).
Using the Autodesk Vault server console, on the
Tools menu, select Backup and Restore. In the
Backup and Restore dialog box, select Restore,then click Next.
Select Full Restore and check Deault
Restore Location or the databaselocation. Select a restore location
where you can copy the backed upfle store, which is dierent rom the
original fle store. This will ensure thatyou do not overwrite the original fles.
Click the Finish button to start the
restore operation.
Note: Veriying your backup by restoring it to atest server is recommended but not necessary.
Step 2: Create a ull backup o the existing vault.
Using the Autodesk Vault server console, on the
Tools menu, select Backup and Restore. In the
Backup and Restore dialog box, select Backup,and then click Next.
Select Full Backup and check Validate
the backed up fles. Select a backuplocation where you can copy the
backed up fles to a test server orrestoration and validation. Click Finish
to start the backup.
Note: I you are using Content Center rom aprevious version o Autodesk Inventor,® backup the existing Content Center libraries.
Ste
• Un
gra
• Un
The uo tim
Ale
Ste
The n
to co
Tip: P
ing y