automotive proceeding first page
TRANSCRIPT
8/10/2019 Automotive Proceeding First Page
http://slidepdf.com/reader/full/automotive-proceeding-first-page 1/10
5-Day Prociency Improvement Programme
on
Automove
Engineeringat
ARAI, Pune(The Automove Research Associaon of India)
14th - 18th July 2014
(for Private Circulaon & Training only)
Organized by
8/10/2019 Automotive Proceeding First Page
http://slidepdf.com/reader/full/automotive-proceeding-first-page 2/10
{ 2 }
8/10/2019 Automotive Proceeding First Page
http://slidepdf.com/reader/full/automotive-proceeding-first-page 3/10
INDEX
{ 3 }
1. Automove Engineering .................................................. 00
2. Automove Tesng & Cercaon .................................. 00
3. Automove Tesng & Cercaon -
Internaonal Type Approval Process ................................ 00
4. I. C. Engine Design & Development .................................. 00
5. Alternate Fuels ................................................................ 00
6. Electric Vehicles and Test Procedures ............................... 00
7. EMI/EMC Compliance ...................................................... 00
8. Hybrid Vehicles ................................................................ 00
9. Automove Safety & Evaluaon ...................................... 00
10. Automove NVH ............................................................. 00
11. Automove Emission Legislaon & Measurement ........... 00
12. Emission Control & Aertreatment Devices ..................... 00
13. Automove CAE .............................................................. 00
8/10/2019 Automotive Proceeding First Page
http://slidepdf.com/reader/full/automotive-proceeding-first-page 4/10
{ 4 }
Dr. K. C. Vora
Mr. V. N. Itkyal Mr. Y. K. Upadhyay
Mr. R. M. Pal Mrs. D. H. Morgaonkar
Mr. D. K. Prabhu Mr. A. V. Jagtap
Mr. A. Y. Takhtar Mr. D. B. Tope
Mr. M. R. Sarkale Mr. Aniket Salunke
ORGANISING COMMITTEE
All ARAI Employees & Departments who contributed
for this programme.
8/10/2019 Automotive Proceeding First Page
http://slidepdf.com/reader/full/automotive-proceeding-first-page 5/10
ABOUT SPEAKERS
{ 5 }
Mr. Rajendra Bandal : General Manager & Operaonal Head for Type Approval
& Engineering at TUV Rheinland (India) Pvt Ltd. He has more than 2 decades of
experience in automove tesng, standardizaon, laboratory management &
planning. He represented in various government commiees for standardizaon
of Motor Vehicle Regulaons, parcularly in photometry, component & vehicles.
Email ID : [email protected]
Dr. A. K. Prakash : Specialist Engineer at Eaton, Pune. He has about 20+ years
of experience in the eld of system opmizaon through plant modeling
and embedded control system development for automove systems, both
convenonal & hybrid vehicles and mission crical defense systems. It also
includes research and academics in robust controls development. He has done
Masters and PhD in Systems & Controls.Email ID : [email protected]
Mr. A. V. Mannikar : Sr. Dy. Director & Head of Safety & Homologaon
Laboratory and Passive Safety Laboratory, ARAI, Pune. He has more than 25
years of experience in Automove R&D mainly in Data Acquision, Analysis &
System Evaluaon for Safety & Reliability. He represents India on Passive Safety
at UNECE. He was responsible for building state of the art Bungee Sled Facility
at ARAI for evaluaon of Seats & Safety Belts. He has keen interest in structure
for Injury Prevenon, Anthropometry (Size India) & its inuence in Safety and
Conicts in Harmonizaon of Safety Standards.Email ID : [email protected]
Mr. N. V. Karanth : Sr. Dy. Director & Head of NVH & CAE Lab at ARAI, Pune.
He has vast experience of 30 years in the automove eld like evaluaon
of automove vehicles for ride comfort, vibraon characterizaon, NVH
Improvements on various noise sources in automobiles, noise polluon
control. He along with NVH team have evaluated various class of automobiles
to provide NVH soluons using both experimental and CAE techniques.
Published and presented a number of papers in various conferences on subject
related to Design and Evaluaon Automove NVH, Ride comfort and DurabilityEvaluaon of Automove vehicles. Responsible for the Genset Cercaon
for Noise, as ARAI being one of the Cercaon agency in India noed by
CPCB. Successfully completed a number of projects for mulnaonals OEMs,
Automove, Non-Automove, Building Acousc Manufacturers and Genset
manufacturers providing end to end soluons. He is the member of Standing
Commiee of NCNPC (Naonal Commiee for Noise Polluon Control and also
the Member Secretary of GRB India Working Group on Noise, WP.29 of UNECE).
Member of Project Evaluaon Commiee-Technology Development Board
(TDB), Department of Science and Technology (DST), Ministry of Science and
Technology Govt of India.
Email ID : [email protected]
8/10/2019 Automotive Proceeding First Page
http://slidepdf.com/reader/full/automotive-proceeding-first-page 6/10
Dr. K. C. Vora : Sr. Dy. Director & Head of Academy at ARAI, Pune. He has his Ph.D.
from IIT-Bombay. He has a vast industrial & academic experience of 29 years and
has been associated with Walchand Nagar Industries, Emitec Emission Controls,
Mahindra & Mahindra and ARAI. He has specialized in the eld of Automove
Educaon, Technology Development Knowledge Management, Engine R&D
and Emission Controls. He was instrumental in starng ARAI Academy, which
conducts Graduate, Post Graduate and Doctoral Courses in Automove
Engineering. He is the Advisor in various acvies of SAEINDIA, under which
he conducts series of students’ acvies like AWIM, BAJA & SUPRA SAEINDIA.
Email: [email protected]
Mr. H. A. Nakhawa : Dy. Director at Emission Cercaon Laboratory at ARAI,
Pune. He holds a Masters degree in Heat Power Mechanical Engineering from
University of Pune and has been working with ARAI for more than 30 years in
various capacies. He handled various funcons like formulaon of regulaons
and their implementaon, approval of emission facilies and consultancy,
cercaon and homologaon, expansion and establishment of new centerslike RCN (i.e. iCAT) and centers coming up under NATRiP project. Recently, he
has established a unique facility for nano parcle measurement and developed
competency to provide the services for export homologaon and R&D purpose.
He works on BIS various technical commiees and principle member from ARAI
on TED2 technical commiee. He is India delegate member represents in GRPE
under WP29 with acve parcipaon in various subgroups like WLTP, EFV, EPPR,
WMTC, NRMM etc. in formulang new global technical regulaons and UN
regulaons under Geneva 1998 agreement.
Email ID : [email protected]
Mr. A. A. Deshpande : Dy. Director & Head of Automove Electronics Laboratory
at ARAI, Pune. He is responsible for evaluaon of automove electronic
embedded systems for EMI/EMC, environmental condions, performance,
etc. He worked on development of rst prototype of electronic engine
management system for passenger car and also on development of number of
test instrumentaon development systems / soware for automove industry.
He led establishment of state-of-art EMI/EMC test facility and evaluaon test
facility for automove electronic systems at ARAI.
Email ID : [email protected]
Dr. S. S. Thipse : Dy. Director at Powertrain Engineering at ARAI, Pune. He did
his Masters in Thermal Sciences from Bradley University, USA and Ph.D. from
New Jersey Instute of Technology in the eld of Alternave Fuels Combuson.
Presently, he is at ARAI, working on the development of Hydrogen, CNG & LPG
engines at Powertrain Engineering Department. He is an acve faculty at ARAI
Academy and serves as a core member in the expert commiee on Alternave
fuels of DST as a nominee of Director, ARAI. He is a Governing Board member
of SAEINDIA Western Secon, life member of Combuson Instute, ISTD and
member of ISO TC 22&BIS TED-26.
Email ID : [email protected]
{ 6 }
8/10/2019 Automotive Proceeding First Page
http://slidepdf.com/reader/full/automotive-proceeding-first-page 7/10
Mr. S. S. Ramdasi : General Manager at Powertrain Engineering at ARAI, Pune.
He has done Masters’ Degree in Mechanical Engineering In Design Discipline
also he has completed Master of Management Science in Management
Informaon Systems. Currently, he is doing Ph.D. from VIT University. He has
R&D experience over 20 years in ARAI, Pune. Presently, he is looking aer engine
design centre at PTE, ARAI and responsible for execuon of various projects in
design & development of engines, components & systems for meeng various
emission norms, strength, durability and structural dynamics requirements. He
has 2 patents on LPG fuel metering system and Gas air mixer for staonary
applicaon engines.
Email ID: [email protected]
Mr. R. S. Mahajan : Dy. General Manager at Computer Aided Engineering
Laboratory at ARAI, Pune. His domain experse includes CAE, Crash/Impact/
Drop analysis of automove structures – especially rollover of buses - and their
validaon, linear, non-linear, contact, thermal, fague analysis of automove
components etc. He has successfully executed number of developmentalprojects in automove as well as non-automove elds using CAE analysis
soware like HYPERWORKS, LS-DYNA, ABAQUS, NASTRAN, ANSYS and FE
Fague etc. He was also involved in developing CAE (soware and hardware)
facilies and Drop test facility at ARAI. He has published and presented several
papers in naonal / internaonal forums.
Email ID : [email protected]
Dr. S. A. Pal : Dy. General Manager & Head of Learning Center at Academy of
ARAI, Pune. He has his Ph.D. from University of Texas at Dallas. He has academic
and research experience of 16 years in the varied domain of speech under stress,
speaker variability under stress, adult-child interacon for language learning,non-linear modeling of speech and driver distracon modeling. Recently, he is
in-charge of the academic acvies at ARAI Academy.
Email : [email protected]
Mr. M. M. Desai : Dy. General Manager at Automove Electronics Laboratory,
ARAI, Pune. Presently he is responsible for Evaluaon, Tesng of Automove
Electronics (EMI/EMC) and Cercaon, tesng of Electric and Hybrid Electric
Vehicles. He is working with ARAI for last 12 years.
Email ID : [email protected]
Mr. Mohammad Raq B. Agrewale : Dy. Manager at ARAI Academy, Pune. He
has done Masters’ Degree in Mechanical Engineering In Thermal Discipline
and Bachelor’s Degree in Automobile Engineering. His area of specializaon is
Automove Tesng & Cercaon, Automove Engineering Systems and CFD.
Email ID: [email protected]
{ 7 }
8/10/2019 Automotive Proceeding First Page
http://slidepdf.com/reader/full/automotive-proceeding-first-page 8/10
Schedule for 5 Day Prociency Improvement Programme on
‘Automove Engineering’Cercate Course
Day One: 14th July 2014
Start End Subject Lead Duration
in Min
08.30 09.30 Registration 60
09.30 10.00 Inauguration & Welcome Address 30
10.00 11.00 Automotive Engineering Dr S. A. Patil 60
11.00 11.15 Tea Break 15
11.15 13.00 Automotive Engineering(Contd.) Dr S. A. Patil 105
13.00 14.00 Lunch 60
14.00 15.15 Automotive Testing & Certifcation Mr. Mohammad Rafq B. Agrewale 75
15.15 15.30 Tea Break 15
15.30 17.00 Automotive Testing & Certifcation –
International Type Approval Process Mr. Rajendra Bandal 90
Day Two: 15th July 2014
09.00 11.00 I. C. Engine Design & Development Mr. S. S. Ramdasi 120
11.00 11.15 Tea Break 15
11.15 13.00 I. C. Engine Design & Development (Contd.) Mr. S. S. Ramdasi 105
13.00 14.00 Lunch 60
14.00 16.00 Alternate Fuels Dr. S. S. Thipse 120
16.00 16.15 Tea Break 15
16.15 17.00 Alternate Fuels (Contd.) Dr. S. S. Thipse 45
{ 8 }
8/10/2019 Automotive Proceeding First Page
http://slidepdf.com/reader/full/automotive-proceeding-first-page 9/10
Day Three: 16th July 2014
Start End Subject Lead Duration
in Min
09.00 11.00 Electric Vehicles and Test Procedures Mr. M.M.Desai 120
11.00 11.15 Tea Break 15
11.15 13.00 EMI/EMC Compliance Mr. A. A. Deshpande 105
13.00 14.00 Lunch 60
14.00 16.00 Hybrid Vehicles Dr. A K Prakash 120
16.00 16.15 Tea Break 15
16.15 17.00 Hybrid Vehicles (Contd.) Dr. A K Prakash 45
Day Four : 17th July 2014
09.00 11.00 Automotive Safety & Evaluation Mr. A. V. Mannikar 120
11.00 11.15 Tea Break 15
11.15 13.00 Automotive NVH Mr. N. V. Karanth 105
13.00 14.00 Lunch 60
14.00 16.00 Automotive Emission Legislation & Measurement Mr. H. A. Nakhawa 120
16.00 16.15 Tea Break 15
16.15 17.00 Automotive Emission Legislation & Mr. H. A. Nakhawa 45
Measurement (Contd.)
Day Five : 18th July 2014
09.00 11.00 Emission Control & Aftertreatment Devices Dr. K. C. Vora 120
11.00 11.15 Tea Break 15
11.15 12.00 Emission Control & Aftertreatment Devices (Contd.) Dr. K. C. Vora 45
12.00 13.00 Automotive CAE Mr. R. S. Mahajan 60
13.00 14.00 Lunch 60
14.00 15.00 Automotive CAE (Contd.) Mr. R. S. Mahajan 60
15.00 15.30 Written Test 30
15.30 16.30 Summary, Discussions and Feedback 60
16.30 17.00 Valedictory Function 30
{ 9 }