1 hrs

1 pcs f

0.20 mmk

0.40 mmh PLA

19 g d

MK3/S

SummaryYou can glue a 10 x 1.5 mm round magnet in the base.

Art & Design > 2D Plates & Logos

xmen widow thor thanos strange starlord spiderman shield punisher panther of mcu marvel man iron hydra hulk guardians groot galaxy fist doctor deadpool daredevil captain black avengers antman america

Recommended infill angle: 0°

Low speed and high temperature will create a shiny top surface.

There are "holes" inside the model to make some of the top layers moreuniform, and they were created with 0.2 layer height in mind.

If your top surface is not flat & shiny and you see scarring, then make sureto check this guide: https://bit.ly/2UtN0I1

Synth3D

Avengers LogoMagnet

VIEW IN BROWSER

updated 23. 4. 2019 | published 13. 4. 2019

https://www.prusaprinters.org/social/106/printshttps://www.prusaprinters.org/social/106/printshttps://www.prusaprinters.org/social/106/printshttps://www.prusaprinters.org/social/106/printshttps://www.prusaprinters.org/prints/699-avengers-logo-magnethttps://www.prusaprinters.org/prints/699-avengers-logo-magnethttps://www.prusaprinters.org/prints?categoryId=13https://www.prusaprinters.org/prints?categoryId=16##########################################################https://bit.ly/2UtN0I1

Print Files (.gcode) DOWNLOAD ALL FILES

750.1 KB

1.17 hrs f 0.20 mm k 0.40 mm h PLA 19.00 g d MK3/S updated 14. 4. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

4.0 MBupdated 14. 4. 2019

License This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

avengers-logo.gcode

avengers-logo.stl

https://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttps://www.prusaprinters.org/prints/699-avengers-logo-magnet/fileshttp://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/http://creativecommons.org/licenses/by-nc-sa/4.0/

Avengers Logo MagnetSummaryPrint Files (.gcode)avengers-logo.gcode

Model Files (.stl, .3mf, .obj, .amf)avengers-logo.stl

LicenseAttribution—Noncommercial—Share Alike