avtrac - extron...avtrac inst wtp wall trim plate for avtrac 70-782-01 model version description...
TRANSCRIPT
Architectural Connectivity
➤ ADA compliant for slope and rise
➤ Modular enclosure supports power, data, and AV connectivity
➤ Select from hundreds of available Extron AAPs for fully-customizable AV connectivity
➤ AC power modules available
➤ Choice of carpet channel or rubber inlay strip
➤ UL/c-UL Listed
AVTrac®
LOW PROFILE FLOOR-MOUNT RACEWAY SYSTEM FOR POWER, DATA, AND AV
CONNECTIVITY
The elegant alternative to trenching and floor coring
A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
7.50 "(19.05 cm)
7.50 "(19.05 cm)
3.63 "(9.21 cm)
4.27 "(10.84 cm)
3.70 "(9.40 cm)
.67"(1.70 cm)
END VIEW - ACTUAL SIZE
Introduction
The Extron AVTrac raceway system includes the AAP enclosure, aluminum
raceway, top cap, and side ramps. Optional accessories are available to
customize the system to your installation needs for a professional finish that
is sure to please the most demanding clients.
The modular AAP Enclosure supports all of the hundreds of available Extron
Architectural Adapter Plates for a fully customizable connectivity solution. Popular
AAPs include USB, HDMI, DisplayPort, VGA and audio pass-through plates; voice,
data, and control pass-through plates; and powered products such as Extron USB
HUB4 AAP and MTP Series twisted pair transmitters. The enclosure provides two
double-space and two triple-space AAP openings, sufficient for mounting up to
10 single-space AAPs. Blank plates are also available to cover any unused AAP
openings. Two AVTrac AAP Enclosures can be mounted side-by-side on separate
raceways utilizing the optional AVTrac Extra Channel Kit.
The proliferation of technology in the workplace has increased the demand for
power, data, and AV signal connectivity. Architects, interior designers, and AV
system integrators are often forced to compromise both aesthetics
and system designs in order to accommodate preexisting
network drops and power outlets. Alternatives, such
as poke-through devices and floor boxes,
can be too conspicuous, costly, or even
prohibited by building owners.
With the Extron AVTrac, architects
and designers are no longer limited
by the placement of wall-mounted
power, data, and AV connectivity.
AVTrac is a low profile, floor-mounted
raceway system with a flexible, modular
AAP - Architectural Adapter Plate enclosure
for power, data, and AV connectivity. AVTrac
offers a discreet, cost-effective alternative to floor coring
for poke-through devices, trenching for floor boxes, and raised access flooring
systems. It allows power, data, and AV signal connection points to be located
wherever they’re needed, with minimal impact on room design or aesthetics.
AVTrac is ideal for use in classrooms, training centers and other reconfigurable
spaces, and corporate boardrooms, as well as for adding new AV connectivity to
legacy installations and architecturally sensitive environments.
The patented, low profile AVTrac raceway system meets accessibility standards
for slope and rise as specified by the ADA - Americans with Disabilities Act. Two
4-foot (1.2 m) tracks combine to create an 8-foot (2.4 m) raceway that can
be installed underneath new or existing commercial grade carpet. AVTrac is
available in two versions. The AVTrac 482C accommodates matching carpet in
the aluminum raceway top cap for use in new installations or installations where
new carpet is being installed. The AVTrac 482R includes a black rubber strip
for installation in the raceway cap and is ideal for retrofit applications. For best
results, installation by a professional carpet installer is recommended.
A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
7.50 "(19.05 cm)
7.50 "(19.05 cm)
3.63 "(9.21 cm)
4.27 "(10.84 cm)
3.70 "(9.40 cm)
.67"(1.70 cm)
END VIEW - ACTUAL SIZE
Features
Cost-Effective Alternative to Floor Coring and TrenchingAVTrac is a cost-effective alternative to poke-
through devices, floor boxes, and raised-access
flooring systems. AVTrac provides the flexibility
to place AV signal connections where they are
needed. The raceway system is ideal for use
in new and retrofit applications as well as in
architecturally sensitive environments.
Fast, Efficient InstallationAVTrac can be installed and fully operational in
a matter of hours, keeping labor costs and down
time to an absolute minimum.
ADA CompliantAVTrac complies with ADA – Americans with
Disabilities Act standards for slope and rise, and
is ideal for use in schools, corporate, government,
and retail applications.
Easy Access Cover PanelThe AVTrac enclosure features a removable top
panel for quick and convenient cable termination
and connector installation.
Modular AAP EnclosureAVTrac’s modular AAP Enclosure features
openings for two double-space and two triple-
space AAPs for a fully customizable connectivity
solution. Two AVTrac AAP Enclosures can be
mounted side-by-side in separate raceways
utilizing the optional AVTrac Extra Channel Kit.
The enclosure can accommodate any of the
hundreds of available Extron AAPs with popular
audio, video, phone, and data connectors, as
well as one AVTrac AC Power Module. Additional
accessories are available for customization.
UL/c-UL ListedAVTrac has been tested by Underwriters
Laboratories, Inc. to nationally recognized safety
standards. It is also approved for use in New
York City by the NYC Dept. of Buildings: Electrical
Division.
Inlay Cap OptionsAVTrac is available in two versions to fit the
installation requirements of most environments.
The AVTrac 482C features an open channel
for customer-selected, unpadded commercial
grade carpet between 1/4 inch and 5/16 inch
(7 mm to 9 mm) thick to match the surrounding
decor. The AVTrac 482C is ideal for use in new
installations, and those in which new carpet
is being installed. The optional AVTrac Rubber
Inlay Kit includes a black rubber inlay that
mounts directly in the AVTrac 482C carpet
inlay channel.
A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
7.50 "(19.05 cm)
7.50 "(19.05 cm)
3.63 "(9.21 cm)
4.27 "(10.84 cm)
3.70 "(9.40 cm)
.67"(1.70 cm)
END VIEW - ACTUAL SIZE
Accessories
AVTrac 482C with matching carpet installed
AVTrac 482R with rubber inlay installed
AVTrac Extra Channel Kit shown with two enclosures mounted side-by-side
The AVTrac 482R includes a black rubber
inlay strip for installation in the top cap of the
raceway. It is ideal for retrofit applications
where additional matching carpet is not readily
available.
AVTrac Cable Pass-Through KitThe AVTrac Cable Pass-Through Kit mounts at the
end of an AVTrac Extension Kit and is designed
for applications where cables need to be passed
from the wall to a hollow table leg, desk, or a
fixed lectern location. The Cable Pass-Through
Kit can also be used at either end of an AVTrac
Extension Kit to allow the seamless transition
of cables from one table leg to the other. The
Cable Pass-Through Kit minimizes the number
of termination points and corresponding signal
loss by allowing continuous cable runs between
primary connection points within the system.
Optional Extension KitThe matching AVTrac Extension Kit includes an
additional 4 feet (1.2 m) or 8 feet (2.4 m) of cable
raceway and side ramps. It can be easily cut to
length as needed and allows power, data, and
AV connectors to be placed from 8 feet (2.4 m)
to 16 feet (4.8 m) from a wall or other area The
AVTrac Extension Kit can be used in combination
with the Rubber Inlay Kit.
Extra Channel KitThe AVTrac Extra Channel Kit allows the
AVTrac system to run two or more cable raceway
channels side by side between one set of side
ramps. The Extra Channel Kit provides additional
raceway capacity for AV cable routing. It is
packaged in two 4-foot (1.2 m) sections for a
total length of 8 feet (2.4 m).
Transition AdaptersThe Raceway Transition Adapter is designed
to work with wall-mounted cable management
systems, including Wiremold 4000 Series™
steel raceways. The AVTrac Raceway Transition
Adapters are available in matching Wiremold
Ivory ScuffCoat™ finish.
The AVTrac Retrofit Transition Adapter is
designed to provide a smooth transition from
the AVTrac floor-mounted raceway to a wall-
mounted patch panel. It facilitates cable pass-
through from wall-mounted AC outlets and
AV connection plates to the raceway system.
In addition, it provides an alternative solution
when base studs cannot be cut due to stringent
building codes.
A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
The Rough-in Adapter is a raceway-to-base stud cable pass-through that provides a clean transition for routing
electrical conduit and AV cables from inside a finished wall into the AVTrac raceway.
The AAP Enclosure is designed for use with the AVTrac Floor-Mount Raceway System and Extra Channel Kit. The
enclosure includes two double-space and two triple-space AAP – Architectural Adapter Plate openings.
The Cable Pass-Through Kit mounts at the end of an AVTrac Extension Kit and is designed for applications where
cables need to be passed from the wall to a hollow table leg, desk, or a fixed lectern location.
AVTrac Accessories
The Extension is an optional 4' (1.2 m) or 8' (2.4 m) raceway track extension kit for use with the AVTrac Floor-Mount Raceway System.
The Extra Channel Kit allows two or more cable raceway channels to run side by side between one set of AVTrac side ramps.
The Raceway Transition Adapter is designed to work with wall-mounted cable management systems, including Wiremold 4000 Series™ steel raceways.
The Rubber Inlay Kit provides a durable, 0.22" (5.6 mm) rubber strip for an aesthetic alternative to matching carpet.
The AVTrac Retro Trans Adapter is designed to provide a smooth transition from the AVTrac floor-mounted raceway to a
wall-mounted patch panel. It facilitates cable pass-through from wall-mounted AC outlets and A/V connection plates to the raceway system.
Model Version Description Part #AVTrac INST TRANS 100WM Wiremold; Ivory 70-783-01
Model Version Description Part #AVTrac INST WTP Wall Trim Plate for AVTrac 70-782-01
Model Version Description Part #AVTrac 4C EXT Extension Kit, 4' (1.2m) – Carpet 70-645-04AVTrac 8C EXT Extension Kit, 8' (2.4m) – Carpet 70-645-08
Model Version Description Part #AVTrac INST EXCL Extra Channel Kit for AVTrac 70-671-01
Model Version Description Part #AVTrac 8R Inlay Kit Rubber Inlay Kit for AVTrac 70-670-01
Model Version Description Part #AVTrac AAP ENCL Holds up to 10 AAPs 70-801-02
Model Version Description Part #AVTrac Retro Trans Adapter for AVTrac 70-679-22
Model Version Description Part #AVTrac INST RIA Rough-in Adapter for AVTrac 70-781-01
The Wall Trim Plate compensates for minor over-cutting of gypsum wallboards during the installation of an AVTrac raceway system.
MLS 406MA
MediaLink Switcher
CONTROL
PEAK
CLIP
SIGNAL
INPUT SELECT
1
2
3
4
5
6
Extron AVTrac Floor Mount Raceway System
Extron Cable Pass-Through KitTable Leg Kit for AVTrac
Extron RacewayTransitionAdapter
LAN
Projector
Speakers
ExtronMLC 226 IPMediaLink Controllerwith IP Link
Wall Mount Cable Raceway
SpeakersProjectorCables run directly from wall to table leg, to furniture connections.
Holes drilled in table leg.
Hollow Table Leg
ExtronCable Cubby 200Cable Access Enclosure
APPLICATION DIAGRAMS
Model Version Description Part #AVTrac INST CPT Cable Pass-Through Kit 70-714-02
Extron USA - West Headquarters
+800.633.9876Inside USA / Canada Only
+1.714.491.1500+1.714.491.1517 FAX
Extron USA - East
+800.633.9876Inside USA / Canada Only
+1.919.863.1794+1.919.863.1797 FAX
Extron Europe
+800.3987.6673Inside Europe Only
+31.33.453.4040+31.33.453.4050 FAX
Extron Asia
+800.7339.8766Inside Asia Only
+65.6383.4400+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655+81.3.3511.7656 FAX
Extron China
+400.883.1568Inside China Only
+86.21.3760.1568+86.21.3760.1566 FAX
Extron Dubai
+971.4.2991800+971.4.2991880 FAX
www.extron.com © 2011 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
04-201168-1420-01REV. F
specifications A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
Specifications
GENERALPower US models 125 VAC, 50/60 Hz, 20 A (max.) International models 240 VAC, 50/60 Hz, 10 A (max.)Enclosure type Metal track base and top, metal connectivity box and
cover, plastic rampsTrack system End ramps 0.67" (1.7 cm) H x 9.36" (23.8 cm) radius, approximately
4.5° slope Side ramps 0.67" (1.7 cm) H x 7.50" (19.0 cm) W on either side of
track x 96.0" (243.8 cm) L, approximately 4.5° slope AVTrac 482C track base and top 1.03" H x 3.70" W x 96.0" L
(2.6 cm H x 9.4 cm W x 243.8 cm L) AVTrac 482R track base and top 0.95" H x 3.70" W x 96.0" L
(2.4 cm H x 9.4 cm W x 243.8 cm L) Connectivity box 3.55" H x 10" W x 4.91" D
(9.0 cm H x 25.4 cm W x 12.5 cm D) Product weight Parts in package 1 of 2 16.9 lbs (7.7 kg) Parts in package 2 of 2 10.6 lbs (4.8 kg)Shipping weight Package 1 of 2 22 lbs (10 kg) Package 2 of 2 13 lbs (6 kg)Vibration ISTA 1A in carton (International Safe Transit Association)Regulatory complianceSafety CE (international models), CUL, UL (US models)Accessibility Title III, Regulation 28 CFR Part 36: ADA Standards for
Accessible Design; Section 4.8: RampsWarranty 3 years parts and labor
Architectural Connectivity SolutionsExtron offers a full selection of complementary Architectural Connectivity
accessories for a complete architectural solution to enhance AVTrac Floor-
Mount Raceway Systems. With our easy to use and interactive online
Connectivity Configurator, you can design the AVTrac system to fit your
client’s exact needs.
Extron has hundreds of AAP – Architectural Adapter Plates, making it
easy to fully customize the unit to meet the connectivity needs of each
installation. Popular AAPs include USB, DisplayPort, DVI, and HDMI; VGA and
audio pass-through plates; and voice, data, and control pass-through plates.
The Extron Connectivity Configurator is an interactive, drag-and-
drop, online tool for designing and customizing architectural connector
installations. This tool presents an up to the minute list of every Extron
AAP – Architectural Adapter Plate currently available. Users can easily sort
through the hundreds of connector options and simply drag and drop their
selections into place. The resulting configuration can be printed for inclusion
in customer presentations and documentation.
Model Version Description Part #
Carpet Inlay Channel
AVTrac 482C Carpet Inlay, No AC power 42-155-00
AVTrac 482C Carpet Inlay, w/AC US, Prewired Conduit 42-155-24A
Rubber Strip Channel
AVTrac 482R Rubber Inlay, No AC power 42-156-00
AVTrac 482R Rubber Strip, w/AC US, Prewired Conduit 42-156-24A
AVTrac Extension Kit
AVTrac 4C EXT Extension, 4’ (1.2m) - Carpet 70-645-04
AVTrac 8C EXT Extension, 8’ (2.4 m) - Carpet 70-645-08
AVTrac Installation Accessories
AVTrac 8R Inlay Kit Rubber Strip Inlay Kit for AVTrac 70-670-01
AVTrac INST EXCL Extra Channel Kit for AVTrac System 70-671-01
AVTrac INST RIA Rough-in Adapter for AVTrac 70-781-01
AVTrac INST CPT Cable Pass-Through Kit 70-714-02
AVTrac INST WTP Finished-Wall Trim Plate for AVTrac 70-782-01
AVTrac RETRO TRANS Retrofit Transition Adapter for AVTrac 70-679-22
AVTrac INST Trans 100WM Wiremold; Ivory 70-783-01
AVTrac AAP Enclosure
AVTrac AAP Enclosure For AVTrac Extra Channel Kit 70-801-02
AVTrac AC Power Modules
AVTrac 2AC US Two US Outlets, Prewired Conduit 70-799-08
AVTrac 4AC US Four US Outlets, Prewired Conduit 70-799-09
AVTrac 1AC AUS Australia Outlet, Conduit Only 70-799-05