azimuth over elevation over azimuth positioners...mec-aea features • bending moment up to 406,745...

Azimuth Over ElevationOver Azimuth PositionersMEC-AEA

FEATURES• Bending Moment up to 406,745 Nm (300,000 ft-lb)• Precision Native Accuracy & Construction• Industry Leading Power-Density vs. Size• Payloads up to 68,039 kg (150,000 lb)

DESCRIPTIONNSI-MI Technologies' Azimuth Over Elevation Over Azimuth Positioners support loads up to 68,039 kg (150,000 lb) and are equipped standard with brushless servo motors, high-efficiency powertrain components, absolute encoders, and user-adjustable hardware limits. A broad selection of performance, convenience, and protection options enable you to configure your positioner for your specific application. MEC-AEA Positioners are our most versatile positioners. The lower azimuth axis on these positioners allows precise pointing of the upper azimuth over elevation axes.

IDEAL FOR• Pointing & Tracking• Near-Field Testing• Radar Cross Section (RCS)• Far-Field Testing• Radome Testing

• Superior Reliability & Longevity• Standardized Add-On Options• Durable Marine-Grade Finish• Rugged Construction

• Ground and Shipboard Communication• Vehicle Characterization• Factory Automation• Scientific and R & D Applications• Surveillance Applications

2

SPECIFICATIONS: LIGHT DUTYParameters Units MEC-AEA-0.4 MEC-AEA-0.8 MEC-AEA-2 MEC-AEA-5Bending Moment, Static Nm (ft-lb) 407 (300) 813 (600) 2,034 (1500) 5,084 (3,750)Axial Load Capacity kg (lb) 136 (300) 363 (800) 680 (1500) 1,361 (3000)Radial Load Capacity kg (lb) 68 (150) 181 (400) 363 (800) 680 (1500)

Delivered Torque Azimuth Nm (ft-lb) 244 (180) 244 (180) 678 (500) 1,085 (800)Elevation Nm (ft-lb) 244 (180) 542 (400) 1,152 (850) 3,390 (2,500)Lower Azimuth Nm (ft-lb) 244 (180) 244 (180) 678 (500) 678 (500)

Withstand TorqueAzimuth Nm (ft-lb) 407 (300) 407 (300) 1,017 (750) 1,627 (1,200)Elevation Nm (ft-lb) 407 (300) 813 (600) 2,034 (1,500) 5,084 (3,750)Lower Azimuth Nm (ft-lb) 407 (300) 407 (300) 1,017 (750) 1,017 (750)

Maximum SpeedAzimuth rpm 3.0 3.0 2.0 1.5Elevation deg/min 1080 720 540 240Lower Azimuth rpm 3.0 3.0 2.0 2.0

Position Readout Accuracy

Azimuth deg ±0.05 (PF2) ±0.05 (PF2) ±0.04 (PF2) ±0.04 (PF2)

Elevation deg ±0.05 (PF2) ±0.05 (PF2) ±0.05 (PF2)±0.005 (PF3)±0.05 (PF2)

±0.005 (PF3)

Lower Azimuth deg ±0.05 (PF2) ±0.05 (PF2) ±0.04 (PF2)±0.005 (PF3)±0.04 (PF2)

±0.005 (PF3)

BacklashAzimuth deg 0.15 0.15 0.1 0.1Elevation deg 0.15 0.15 0.1 0.1Lower Azimuth deg 0.15 0.15 0.1 0.1

Limit-to-Limit TravelAzimuth deg ±200 Adjustable Limit Switch (LS1) or Continuous (LS0)Elevation deg ±95Lower Azimuth deg ±200

PhysicalThru Hole Diameter mm (in.) 66 (2.6) 66 (2.6) 76 (3) 127 (5)Turntable Diameter mm (in.) 305 (12) 305 (12) 356 (14) 512 (20.5)Height (at 0 deg Elevation) mm (in.) 747 (29.4) 802 (31.6) 921 (36.3) 1035 (40.8)Net Weight kg (lb) 136 (300) 227 (500) 363 (800) 454 (1,000)

EnvironmentalOperating Conditions N/A Direct Outdoor Exposure

Temperature RangeOperating 0C (0F) -20 to 60 (-4 to 140)Storage 0C (0F) -30 to 70 (-22 to 158)

Relative HumidityOperating % 100Storage % 100

Factory Installed Options (Refer to Page 7 for definitions)

PF Position Feedback N/APF2 PF2 PF2 PF2N/A N/A PF3 PF3

RFP RF Path Options GHz

RFP18, RJ18 RFP18, RJ18 RFP18, RJ18 RFP18, RJ18RFP26, RJ26 RFP26, RJ26 RFP26, RJ26 RFP26, RJ26RFP40, RJ40 RFP40, RJ40 RFP40, RJ40 RFP40, RJ40RFP50, RJ50 RFP50, RJ50 RFP50, RJ50 RFP50, RJ50

RRUCRU

Electrical Path Options No. of Axis

RRU1, CRU1 RRU1, CRU1 RRU1, CRU1 RRU1, CRU1N/A N/A N/A N/AN/A N/A N/A N/A

RRTCRT

Electrical Path Options

No. of Conductors

RRT24, CRT24 RRT24, CRT24 RRT24, CRT24 RRT24, CRT24N/A N/A N/A N/A

SPECIFICATIONS: MEDIUM DUTYParameters Units MEC-AEA-12 MEC-AEA-24 MEC-AEA-40 MEC-AEA-55Bending Moment, Static Nm (ft-lb) 12,202 (9,000) 24,405 (18,000) 40,675 (30,000) 54,911 (40,500)Axial Load Capacity kg (lb) 5,443 (12,000) 9,072 (20,000) 13,608 (30,000) 18,144 (40,000)Radial Load Capacity kg (lb) 2,722 (6,000) 4,536 (10,000) 6,804 (15,000) 9,072 (20,000)

Delivered Torque Azimuth Nm (ft-lb) 1,627 (1,200) 2,712 (2,000) 2,712 (2,000) 3,728 (2,750) Elevation Nm (ft-lb) 8,135 (6,000) 16,270 (12,000) 24,405 (18,000) 36,607 (27,000)Lower Azimuth Nm (ft-lb) 1,627 (1,200) 1,627 (1,200) 5,423 (4,000) 8,135 (6,000)

Withstand TorqueAzimuth Nm (ft-lb) 2,440 (1,800) 4,067 (3,000) 4,067 (3,000) 5,593 (4,125)Elevation Nm (ft-lb) 12,202(9,000) 24,405 (18,000) 40,675 (30,000) 54,911 (40,500)Lower Azimuth Nm (ft-lb) 2,440 (1,800) 2,440 (1,800) 8,135 (6,000) 12,202 (9,000)



Azimuth deg ±0.04 (PF2)±0.005 (PF3)±0.04 (PF2)

±0.005 (PF3)±0.04 (PF2)

±0.005 (PF3)±0.04 (PF2)

±0.005 (PF3)

Elevation deg ±0.05 (PF2)±0.005 (PF3)±0.05 (PF2)

±0.005 (PF3)±0.05 (PF2)

±0.005 (PF3)±0.03 (PF2)

±0.005 (PF3)

Lower Azimuth deg ±0.04 (PF2)±0.005 (PF3)±0.04 (PF2)

±0.005 (PF3)±0.04 (PF2)

±0.005 (PF3)±0.04 (PF2)

±0.005 (PF3)


Limit-to-Limit TravelAzimuth deg ±200 Adjustable Limit Switch (LS1) or Continuous (LS0)Elevation deg ±95Lower Azimuth deg ±200

PhysicalThru Hole Diameter mm (in.) 127 (5) 152 (6) 203 (8) 203 (8)Turntable Diameter mm (in.) 610 (24) 635 (25) 756 (29.8) 846 (33.3)Height mm (in.) 1,324 (52.1) 1,391 (54.8) 1,537 (60.5) 1,765 (69.5)Net Weight kg (lb) 1,179 (2,600) 1,678 (3,700) 2,359 (5,200) 3,629 (8,000)





PF Position Feedback N/APF2 PF2 PF2 PF2PF3 PF3 PF3 PF3



RRUCRU


RRU1, CRU1 RRU1, CRU1 RRU1, CRU1 RRU1, CRU1RRU2, CRU2 RRU2, CRU2 RRU2, CRU2 RRU2, CRU2

N/A N/A N/A N/ARRTCRT


No. of Conductors

RRT24, CRT24 RRT24, CRT24 RRT24, CRT24 RRT24, CRT24RRT60, CRT60 RRT60, CRT60 RRT60, CRT60 RRT60, CRT60

3

4

SPECIFICATIONS: HEAVY DUTYParameters Units MEC-AEA-120 MEC-AEA-180 MEC-AEA-300 MEC-AEA-400Bending Moment, Static Nm (ft-lb) 122,024 (90,000) 183,035 (135,000) 305,059 (225,000) 406,745 (300,000)Axial Load Capacity kg (lb) 34,019 (75,000) 40,823 (90,000) 68,039 (150,000) 45,359 (100,000)Radial Load Capacity kg (lb) 18,144 (40,000) 20,412 (45,000) 45,359 (100,000) 22,680 (50,000)

Delivered Torque Azimuth Nm (ft-lb) 13,558 (10,000) 24,405 (18,000) 40,675 (30,000) 54,233 (40,000)Elevation Nm (ft-lb) 81,349 (60,000) 122,024 (90,000) 183,035 (135,000) 203,373 (150,000)Lower Azimuth Nm (ft-lb) 13,558 (10,000) 24,405 (18,000) 33,895 (25,000) 108,465 (80,000)

Withstand TorqueAzimuth Nm (ft-lb) 20,337 (15,000) 36,607 (27,000) 61,012 (45,000) 74,570 (55,000)Elevation Nm (ft-lb) 122,024 (90,000) 183,035 (135,000) 305,059 (225,000) 406,745 (300,000)Lower Azimuth Nm (ft-lb) 20,337 (15,000) 36,607 (27,000) 50,843 (37,500) 135,582 (100,000)



Azimuth deg ±0.03 (PF2)±0.005 (PF3)±0.02 (PF2)

±0.005 (PF3)±0.02 (PF2)

±0.005 (PF3)±0.02 (PF2)

±0.005 (PF3)

Elevation deg ±0.04 (PF2) ±0.005 (PF3)±0.05 (PF2)

±0.005 (PF3)±0.04 (PF2)

±0.005 (PF3)±0.03 (PF2)

±0.005 (PF3)

Lower Azimuth deg ±0.03 (PF2) ±0.005 (PF3)±0.02 (PF2)

±0.005 (PF3)±0.02 (PF2)

±0.005 (PF3)±0.02 (PF2)

±0.005 (PF3)


Limit-to-Limit TravelAzimuth deg ±200 Adjustable Limit Switch (LS1) or Continuous (LS0)Elevation deg ±95 +92/-45 ±95 +92 / -20Lower Azimuth deg ±200

PhysicalThru Hole Diameter mm (in.) 203 (8) 152 (6) 203 (8) 203 (8)Turntable Diameter mm (in.) 965 (38) 1,201 (47.3) 1,194 (47) 2,108 (83)Height mm (in.) 2,165 (85.3) 2,884 (113.6) 2,642 (104) 4,210 (166)Net Weight kg (lb) 5,443 (12,000) 5,262 (11,600) 12,247 (27,000) 22,680 (50,000)





PF Position Feedback N/APF2 PF2 PF2 PF2PF3 PF3 PF3 PF3



RRUCRU


RRU1, CRU1 RRU1, CRU1 RRU1, CRU1 RRU1, CRU1RRU2, CRU2 RRU2, CRU2 RRU2, CRU2 RRU2, CRU2RRU3, CRU3 RRU3, CRU3 RRU3, CRU3 RRU3, CRU3

RRTCRT


No. of Conductors

RRT24, CRT24 RRT24, CRT24 RRT24, CRT24 RRT24, CRT24RRT60, CRT60 RRT60, CRT60 RRT60, CRT60 RRT60, CRT60

80231.6

92136.3

OR PART NONOMENCLATURE

DWN

PROPERTY OF NSI-MI TECHNOLOGIES, LLC.

FIND NO

STOCK NO QTY

SHEET

REV

INTERPRET

DRAWING NUMBER

SCALE

SIZE CAGE CODE

IDENTIFYING

ITS UNAUTHORIZED USE OR DISSEMINATION IS PROHIBITED.

NSI-MI Technologies,LLC

7MSX5

CONFIG

FINISH

SHT

Y14.5

REQD

CONFIDENTIALITY STATEMENT

REV

D

AND CORNERS .010 MAX

APVD

PER ANSI

NONE

BREAK SHARP EDGES

THIS INFORMATION IS CONSIDERED TO BE PROPRIETARY INFORMATION AND THE

OR DESCRIPTION MIT

DWG NO

ENGR

CHKR

PROD

ALL DIMENSIONS IN INCHESUNLESS OTHERWISE SPECIFIED

TOLERANCES 3 PLACE DECIMAL .005 2 PLACE DECIMAL .02 1 PLACE DECIMAL .1 FRACTION ANGLES .5

MAX SURFACE ROUGHNESS 125 ALL MACHINE SURFACES EXCEPT AS NOTED

ITEM OR

72128.4

55721.9

103540.8

40515.9

41916.5

74629.4

LIGHT DUTY

FOR INTERNAL REVIEW ONLYNOT FOR GENERAL DISTRIBUTION

MODEL #WITHSTAND TORQUE, ELEVATION ft-lb [Nm]LOAD CAPACITY, AXIAL lb [kg]LOAD CAPACITY, RADIAL lb [kg]DELIVERED TORQUE, UPPPER AZIMUTH ft-lb [Nm]DELIVERED TORQUE, ELEVATION ft-lb [Nm]DELIVERED TORQUE, LOWER AZIMUTH ft-lb [Nm]SPEED, UPPPER AZIMUTH rpmSPEED, ELEVATION deg/minSPEED, LOWER AZIMUTH rpmWEIGHT lb [kg]

MEC-AEA-0.4300 [407]300 [136]150 [68]

180 [244]180 [244]180 [244]

31080

3300 [136]

MEC-AEA-0.8600 [813]800 [363]400 [181]180 [244]400 [542]180 [244]

3720

3500 [227]

MEC-AEA-21,500 [2,034]1,500 [680]800 [363]500 [678]

850 [1,152]500 [678]

2540

2800 [363]

MEC-AEA-53,750 [5,084]3,000 [1,361]1,500 [680]800 [1,085]

2,500 [3,390]500 [678]

1.5540

21,000 [454]

MEC-AEA-0.8600 [813]800 [363]400 [181]180 [244]400 [542]180 [244]

3720

3500 [227]

MEC-AEA-21,500 [2,034]1,500 [680]800 [363]500 [678]

850 [1,152]500 [678]

2540

2800 [363]

MEC-AEA-53,750 [5,084]3,000 [1,361]1,500 [680]800 [1,085]

2,500 [3,390]500 [678]

1.5540

21,000 [454]

MEC-AEA-0.4300 [407]300 [136]150 [68]

180 [244]180 [244]180 [244]

31080

3300 [136]

50519.9

41916.5

60623.9

49819.6

MEC-AEA-0.4 MEC-AEA-0.8 MEC-AEA-2 MEC-AEA-5

MEC-AEA-12 MEC-AEA-24 MEC-AEA-40 MEC-AEA-55

MEC-AEA POSITIONER DIMENSIONAL CONFIGURATIONS

All dimensions are in mm (in.)

5

80231.6

92136.3


DWN


FIND NO

STOCK NO QTY

SHEET

REV

INTERPRET

DRAWING NUMBER

SCALE

SIZE CAGE CODE

IDENTIFYING



7MSX5

CONFIG

FINISH

SHT

Y14.5

REQD


REV

D


APVD

PER ANSI

NONE

BREAK SHARP EDGES


OR DESCRIPTION MIT

DWG NO

ENGR

CHKR

PROD




ITEM OR

72128.4

55721.9

103540.8

40515.9

41916.5

74629.4

LIGHT DUTY



MEC-AEA-0.4300 [407]300 [136]150 [68]

180 [244]180 [244]180 [244]

31080

3300 [136]

MEC-AEA-0.8600 [813]800 [363]400 [181]180 [244]400 [542]180 [244]

3720

3500 [227]

MEC-AEA-21,500 [2,034]1,500 [680]800 [363]500 [678]

850 [1,152]500 [678]

2540

2800 [363]

MEC-AEA-53,750 [5,084]3,000 [1,361]1,500 [680]800 [1,085]

2,500 [3,390]500 [678]

1.5540

21,000 [454]

MEC-AEA-0.8600 [813]800 [363]400 [181]180 [244]400 [542]180 [244]

3720

3500 [227]

MEC-AEA-21,500 [2,034]1,500 [680]800 [363]500 [678]

850 [1,152]500 [678]

2540

2800 [363]

MEC-AEA-53,750 [5,084]3,000 [1,361]1,500 [680]800 [1,085]

2,500 [3,390]500 [678]

1.5540

21,000 [454]

MEC-AEA-0.4300 [407]300 [136]150 [68]

180 [244]180 [244]180 [244]

31080

3300 [136]

50519.9

41916.5

60623.9

49819.6

80231.6

92136.3


DWN


FIND NO

STOCK NO QTY

SHEET

REV

INTERPRET

DRAWING NUMBER

SCALE

SIZE CAGE CODE

IDENTIFYING



7MSX5

CONFIG

FINISH

SHT

Y14.5

REQD


REV

D


APVD

PER ANSI

NONE

BREAK SHARP EDGES


OR DESCRIPTION MIT

DWG NO

ENGR

CHKR

PROD




ITEM OR

72128.4

55721.9

103540.8

40515.9

41916.5

74629.4

LIGHT DUTY



MEC-AEA-0.4300 [407]300 [136]150 [68]

180 [244]180 [244]180 [244]

31080

3300 [136]

MEC-AEA-0.8600 [813]800 [363]400 [181]180 [244]400 [542]180 [244]

3720

3500 [227]

MEC-AEA-21,500 [2,034]1,500 [680]800 [363]500 [678]

850 [1,152]500 [678]

2540

2800 [363]

MEC-AEA-53,750 [5,084]3,000 [1,361]1,500 [680]800 [1,085]

2,500 [3,390]500 [678]

1.5540

21,000 [454]

MEC-AEA-0.8600 [813]800 [363]400 [181]180 [244]400 [542]180 [244]

3720

3500 [227]

MEC-AEA-21,500 [2,034]1,500 [680]800 [363]500 [678]

850 [1,152]500 [678]

2540

2800 [363]

MEC-AEA-53,750 [5,084]3,000 [1,361]1,500 [680]800 [1,085]

2,500 [3,390]500 [678]

1.5540

21,000 [454]

MEC-AEA-0.4300 [407]300 [136]150 [68]

180 [244]180 [244]180 [244]

31080

3300 [136]

50519.9

41916.5

60623.9

49819.6

80231.6

92136.3


DWN


FIND NO

STOCK NO QTY

SHEET

REV

INTERPRET

DRAWING NUMBER

SCALE

SIZE CAGE CODE

IDENTIFYING



7MSX5

CONFIG

FINISH

SHT

Y14.5

REQD


REV

D


APVD

PER ANSI

NONE

BREAK SHARP EDGES


OR DESCRIPTION MIT

DWG NO

ENGR

CHKR

PROD




ITEM OR

72128.4

55721.9

103540.8

40515.9

41916.5

74629.4

LIGHT DUTY



MEC-AEA-0.4300 [407]300 [136]150 [68]

180 [244]180 [244]180 [244]

31080

3300 [136]

MEC-AEA-0.8600 [813]800 [363]400 [181]180 [244]400 [542]180 [244]

3720

3500 [227]

MEC-AEA-21,500 [2,034]1,500 [680]800 [363]500 [678]

850 [1,152]500 [678]

2540

2800 [363]

MEC-AEA-53,750 [5,084]3,000 [1,361]1,500 [680]800 [1,085]

2,500 [3,390]500 [678]

1.5540

21,000 [454]

MEC-AEA-0.8600 [813]800 [363]400 [181]180 [244]400 [542]180 [244]

3720

3500 [227]

MEC-AEA-21,500 [2,034]1,500 [680]800 [363]500 [678]

850 [1,152]500 [678]

2540

2800 [363]

MEC-AEA-53,750 [5,084]3,000 [1,361]1,500 [680]800 [1,085]

2,500 [3,390]500 [678]

1.5540

21,000 [454]

MEC-AEA-0.4300 [407]300 [136]150 [68]

180 [244]180 [244]180 [244]

31080

3300 [136]

50519.9

41916.5

60623.9

49819.6

74329.3

138454.5

105841.7

132452.1

176569.51391

54.8

153760.5

94937.4

77830.6

108342.6

89535.2

MEDIUM DUTYNOT FOR GENERAL DISTRIBUTION

FOR INTERNAL REVIEW ONLY


MEC-AEA-107,500 [10,169]12,000 [5,443]6,000 [2,722]1,200 [1,627]5,000 [6,779]1,200 [1,627]

1.51401.5

2,700 [1,225]

MEC-AEA-5540,500 [54,911]40,000 [18,144]20,000 [9,072]2,750 [3,728]

27,000 [36,607]6,000 [8,135]

0.5250.5

8,400 [3,810]

MEC-AEA-4030,000 [40,675]30,000 [13,608]15,000 [6,804]2,000 [2,712]

18,000 [24,405]2,000 [2,712]

1301

5,200 [2,359]

MEC-AEA-2015,600 [21,151]20,000 [9,072]10,000 [4,536]2,000 [2,712]

10,400 [14,101]1,200 [1,627]

11401.5

3,700 [1,678]

SHT REV

7MSX5

DWG NO

NONEITS UNAUTHORIZED USE OR DISSEMINATION IS PROHIBITED.

DWN

SHEET

REVDRAWING NUMBER

SCALE

SIZE



CAGE CODE

PROPERTY OF NSI-MI TECHNOLOGIES, LLC.D

ENGR

CHKR

PROD

APVD

CONFIG

FINISH


74329.3

138454.5

105841.7

132452.1

176569.51391

54.8

153760.5

94937.4

77830.6

108342.6

89535.2




MEC-AEA-107,500 [10,169]12,000 [5,443]6,000 [2,722]1,200 [1,627]5,000 [6,779]1,200 [1,627]

1.51401.5

2,700 [1,225]

MEC-AEA-5540,500 [54,911]40,000 [18,144]20,000 [9,072]2,750 [3,728]

27,000 [36,607]6,000 [8,135]

0.5250.5

8,400 [3,810]

MEC-AEA-4030,000 [40,675]30,000 [13,608]15,000 [6,804]2,000 [2,712]

18,000 [24,405]2,000 [2,712]

1301

5,200 [2,359]

MEC-AEA-2015,600 [21,151]20,000 [9,072]10,000 [4,536]2,000 [2,712]

10,400 [14,101]1,200 [1,627]

11401.5

3,700 [1,678]

SHT REV

7MSX5

DWG NO


DWN

SHEET

REVDRAWING NUMBER

SCALE

SIZE



CAGE CODE


ENGR

CHKR

PROD

APVD

CONFIG

FINISH


74329.3

138454.5

105841.7

132452.1

176569.51391

54.8

153760.5

94937.4

77830.6

108342.6

89535.2




MEC-AEA-107,500 [10,169]12,000 [5,443]6,000 [2,722]1,200 [1,627]5,000 [6,779]1,200 [1,627]

1.51401.5

2,700 [1,225]

MEC-AEA-5540,500 [54,911]40,000 [18,144]20,000 [9,072]2,750 [3,728]

27,000 [36,607]6,000 [8,135]

0.5250.5

8,400 [3,810]

MEC-AEA-4030,000 [40,675]30,000 [13,608]15,000 [6,804]2,000 [2,712]

18,000 [24,405]2,000 [2,712]

1301

5,200 [2,359]

MEC-AEA-2015,600 [21,151]20,000 [9,072]10,000 [4,536]2,000 [2,712]

10,400 [14,101]1,200 [1,627]

11401.5

3,700 [1,678]

SHT REV

7MSX5

DWG NO


DWN

SHEET

REVDRAWING NUMBER

SCALE

SIZE



CAGE CODE


ENGR

CHKR

PROD

APVD

CONFIG

FINISH


74329.3

138454.5

105841.7

132452.1

176569.51391

54.8

153760.5

94937.4

77830.6

108342.6

89535.2




MEC-AEA-107,500 [10,169]12,000 [5,443]6,000 [2,722]1,200 [1,627]5,000 [6,779]1,200 [1,627]

1.51401.5

2,700 [1,225]

MEC-AEA-5540,500 [54,911]40,000 [18,144]20,000 [9,072]2,750 [3,728]

27,000 [36,607]6,000 [8,135]

0.5250.5

8,400 [3,810]

MEC-AEA-4030,000 [40,675]30,000 [13,608]15,000 [6,804]2,000 [2,712]

18,000 [24,405]2,000 [2,712]

1301

5,200 [2,359]

MEC-AEA-2015,600 [21,151]20,000 [9,072]10,000 [4,536]2,000 [2,712]

10,400 [14,101]1,200 [1,627]

11401.5

3,700 [1,678]

SHT REV

7MSX5

DWG NO


DWN

SHEET

REVDRAWING NUMBER

SCALE

SIZE



CAGE CODE


ENGR

CHKR

PROD

APVD

CONFIG

FINISH


419(16.5)

405(15.9)

746(29.4)

743(29.3)

1324(52.1)

1391(54.8)

949(37.4)

778(30.6)

1083(42.6)

895(35.2)

1537(60.5)

1765(69.5)

1058(41.7)

1384(54.5)

802(31.6)

921(36.3)

1035(40.8)

557(21.9)

721(28.4)

498(19.6)

606(23.9)

419(16.5)

505(19.9)

Front View

Top View

Front View

Top View

6

3522138.6

2593102.1

2884113.6

SHT REV

7MSX5



SHEET

REVDRAWING NUMBER

SCALE

SIZE

DWN



CAGE CODE

DWG NO

D

ENGR

CHKR

PROD

APVD

CONFIG

FINISH


185072.8

142256.0

4363171.8

2642104.0

NOT FOR GENERAL DISTRIBUTIONFOR INTERNAL REVIEW ONLY

HEAVY DUTY

MEC-AEA-12090,000 [122,024]75,000 [34,019]40,000 [18,144]10,000 [13,558]60,000 [81,349]10,000 [13,558]

0.5300.5

12,000 [5,443]

MEC-AEA-180135,000 [183,035]

90,000 [40,823]45,000 [20,412]18,000 [24,405]

90,000 [122,024]18,000 [24,405]

0.5200.5

11,600 [5,262]

MEC-AEA-300225,000 [305,059]150,000 [68,039]100,000 [45,359]30,000 [40,675]

135,000 [183,035]25,000 [33,895]

0.3200.5

27,000 [12,247]

MEC-AEA-400300,000 [406,745]200,000 [90,718]100,000 [45,359]40,000 [54,233]

150,000 [203,373]80,000 [108,465]

0.2100.2

48,000 [21,772]


143256.4

127650.3

184272.5

174668.8

216585.3

3522138.6

2593102.1

2884113.6

SHT REV

7MSX5



SHEET

REVDRAWING NUMBER

SCALE

SIZE

DWN



CAGE CODE

DWG NO

D

ENGR

CHKR

PROD

APVD

CONFIG

FINISH


185072.8

142256.0

4363171.8

2642104.0


HEAVY DUTY

MEC-AEA-12090,000 [122,024]75,000 [34,019]40,000 [18,144]10,000 [13,558]60,000 [81,349]10,000 [13,558]

0.5300.5

12,000 [5,443]

MEC-AEA-180135,000 [183,035]

90,000 [40,823]45,000 [20,412]18,000 [24,405]

90,000 [122,024]18,000 [24,405]

0.5200.5

11,600 [5,262]

MEC-AEA-300225,000 [305,059]150,000 [68,039]100,000 [45,359]30,000 [40,675]

135,000 [183,035]25,000 [33,895]

0.3200.5

27,000 [12,247]

MEC-AEA-400300,000 [406,745]200,000 [90,718]100,000 [45,359]40,000 [54,233]

150,000 [203,373]80,000 [108,465]

0.2100.2

48,000 [21,772]


143256.4

127650.3

184272.5

174668.8

216585.3

3522138.6

2593102.1

2884113.6

SHT REV

7MSX5



SHEET

REVDRAWING NUMBER

SCALE

SIZE

DWN



CAGE CODE

DWG NO

D

ENGR

CHKR

PROD

APVD

CONFIG

FINISH


185072.8

142256.0

4363171.8

2642104.0


HEAVY DUTY

MEC-AEA-12090,000 [122,024]75,000 [34,019]40,000 [18,144]10,000 [13,558]60,000 [81,349]10,000 [13,558]

0.5300.5

12,000 [5,443]

MEC-AEA-180135,000 [183,035]

90,000 [40,823]45,000 [20,412]18,000 [24,405]

90,000 [122,024]18,000 [24,405]

0.5200.5

11,600 [5,262]

MEC-AEA-300225,000 [305,059]150,000 [68,039]100,000 [45,359]30,000 [40,675]

135,000 [183,035]25,000 [33,895]

0.3200.5

27,000 [12,247]

MEC-AEA-400300,000 [406,745]200,000 [90,718]100,000 [45,359]40,000 [54,233]

150,000 [203,373]80,000 [108,465]

0.2100.2

48,000 [21,772]


143256.4

127650.3

184272.5

174668.8

216585.3

3522138.6

2593102.1

2884113.6

SHT REV

7MSX5



SHEET

REVDRAWING NUMBER

SCALE

SIZE

DWN



CAGE CODE

DWG NO

D

ENGR

CHKR

PROD

APVD

CONFIG

FINISH


185072.8

142256.0

4363171.8

2642104.0


HEAVY DUTY

MEC-AEA-12090,000 [122,024]75,000 [34,019]40,000 [18,144]10,000 [13,558]60,000 [81,349]10,000 [13,558]

0.5300.5

12,000 [5,443]

MEC-AEA-180135,000 [183,035]

90,000 [40,823]45,000 [20,412]18,000 [24,405]

90,000 [122,024]18,000 [24,405]

0.5200.5

11,600 [5,262]

MEC-AEA-300225,000 [305,059]150,000 [68,039]100,000 [45,359]30,000 [40,675]

135,000 [183,035]25,000 [33,895]

0.3200.5

27,000 [12,247]

MEC-AEA-400300,000 [406,745]200,000 [90,718]100,000 [45,359]40,000 [54,233]

150,000 [203,373]80,000 [108,465]

0.2100.2

48,000 [21,772]


143256.4

127650.3

184272.5

174668.8

216585.3

1432(56.4)

1276(50.3)

2165(85.3)

2884(113.6)

1850(72.8) 1746(68.8)

3522(138.6)

2593(102.1)

4210(165.8)

1842(72.5)

2642(104.0)

1422(56.0)

MEC-AEA-120 MEC-AEA-180 MEC-AEA-300 MEC-AEA-400

MEC-AEA POSITIONER DIMENSIONAL CONFIGURATIONS

All dimensions are in mm (in.)

Front View

Top View

7

POSITION FEEDBACK OPTIONSPF1: Off-Axis Absolute EncoderStandard absolute feedback with Encoder

PF2: Dual Speed Synchro Standard absolute feedback with Dual Speed Synchro

PF3: High Accuracy, ±0.005 degrees native read-out accuracy for most positonersReplaces standard absolute feedback with center-drive high accuracy absolute encoder

Notes: Options are available to further enhance the native accuracy using error correction techniques. See Enhanced Accuracy Options brochure for additional information.

LIMIT SWITCH OPTIONS

LS0: No Limits, Continuous Rotation LS1: Restricted Rotation up to ±200 degrees (adjustable)

RF PATH OPTIONS RJ Rotary Joint (Continuous Rotation) Adds a single channel RF path inside the positioner supporting continuous, unrestricted rotation of the axis. The factory installed kit contains RF rotary joint and internal RF cabling.

RJ18: DC-18 GHz, SMA RJ26: DC-26.5 GHz, 3.5 mm RJ40: DC-40 GHz, K RJ50: DC-50 GHz, 2.4 mm

RF Path (Restricted Rotation) Adds a single channel RF path inside the positioner with restricted travel of the positioner up to a ±200 degree travel range. The factory installed kit contains internal RF cabling.

RFP18: DC-18 GHz, SMA RFP26: DC-26.5 GHz, 3.5 mm RFP40: DC-40 GHz, K RFP50: DC-50 GHz, 2.4 mm

ELECTRICAL PATH OPTIONSCRU (Continuous Rotation for Upper-Axes)Adds an electrical path inside the positioner supporting continuous unrestricted rotation of the upper motorized axis. The factory installed kit includes an internal electrical slip-ring assembly and internal wiring.

CRU1: Wiring Support for One (1) Axis CRU2: Wiring Support for Two (2) Axes CRU3: Wiring Support for Three (3) Axes

RRU (Restricted Rotation for Upper-Axes)Adds an electrical path for upper motorized axes inside the positioner supporting restricted rotation up to ±200 degrees. The factory installed kit includes internal wiring.

RRU1: Wiring Support for One (1) Axis RRU2: Wiring Support for Two (2) Axes RRU3: Wiring Support for Three (3) Axes

CRT (Continuous Rotation for Thru-Contacts)Adds an electrical path inside the positioner supporting continuous unrestricted rotation for dedicated thru-contacts. The factory installed kit contains an internal electrical slip-ring assembly and internal wiring.Applications: RF switch control, amplifier DC power, attenuation control.

CRT24: Thru-Contacts, 24 Contacts CRT60: Thru-Contacts, 60 Contacts

RRT (Restricted Rotation for Thru-Contacts)Adds an electrical path inside the positioner supporting restricted rotation up to ±200 degrees for dedicatedthru-contacts. The factory installed kit contains an internal wiring harness, cap and chain protectors.Applications: RF switch control, amplifier DC power, attenuation control.

RRT24: Thru-Contacts, 24 Contacts RRT60: Thru-Contacts, 60 Contacts

CONVENIENCE & PROTECTION OPTIONSStow-Pin:Adds manual stow-pin and mating receptacle to protect the positioner’s drive-train in susceptible environments such as high wind-gust exposure in outdoor environments and high-load pick-up mode applications. Includes electrical interlock circuit for disabling the servo system when stow-pin is inserted. Default position is zero (0) degrees. Alternate stow-pin angle locations are available upon request.

SP1 – Stow-Pin, Azimuth / Polarization SP2 – Stow-Pin, Elevation

Leveling Mount:Adds a kit of wedge-style leveling mounts to allow easy and quick leveling of positioner during installation.

LM1 – Leveling Mount

Riser:Adds a structural riser below the positioner for applications requiring accurate centering from a platform, outdoor silo applications, and various customer requested heights. Risers are designed to withstand the full capacity of the mated positioner and are tailored to your required height. Available features include access hatches, custom color, internal shelving, and external and internal ladders.

RS1 – Riser

DS-A

EA-1

.4/0

1/20

Information contained herein shall not be used as a contractual document. All products and their specifications subject tochange without notice. © Copyright 2020, all rights reserved, NSI-MI Technologies | www.nsi-mi.com | [email protected]

azimuth over elevation over azimuth positioners...mec-aea features • bending moment up to 406,745...

Documents