battery & electrical · 2017-07-18 · battery & electrical jtc auto tools 678 – 876 –...

BATTERY & ELECTRICAL

JTC AUTO TOOLS 678 – 876 – 3470

2600 Northlake Dr. Suite F,

Suwannee, GA, 30024

JTC-1039 BATTERY TESTER

Avoids dead battery and helps

extend battery life.

Test battery life by hot or cold, and

detects overcharge.

Applicable: 12 and 24 volt systems.

JTC-1040 ANTI–FREEZE TESTER

Avoid winter freeze up and

summer boil-over.

Test all permanent (Ethylene

Glycol) solution with radiator hot

or cold.

Two scales show freezing point of

radiator solution and boiling point

of summer coolant.

JTC-1041 BATTERY HYDROMETER

Test battery in seconds.

Color – coded float for easy

reading.


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-1043 DELUXE BATTERY FILLER

Large suction designed to suck easily and quickly.

For battery fuller or any other liquid.

JTC-1105 R-134a MANIFOLD

Enclosed the 1107 adjustable coupler.

R-137a sight glass manifold with

three 60"color-coded hoses.

High pressure: 0 ~ 500psi (0 ~ 35kg / c㎡)

Low pressure: 0 ~ 350psi (-1 ~ 24.5kg / c㎡)

Vacuum: 0 ~ 76 in / Hg

JTC-1107 ADJUSTABLE QUICK COUPLER SET

Enclosed the high side and low side

coupler

The valve core puller is adjustable to

fit the different valve core.


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-1137 QUICK COUPLER SET

Enclosed the high side and low side coupler.

Straight design suitable for confined space.

JTC-1138 VALVE CORE REMOVER (R-12 / R134a)

Designed for removing valve coves in

air condition system.

Spec: R-12 / R-134a

JTC-1139 VALVE CORE REMOVER

(R-134a / R-134a EXTENDED)

Designed for removing valve coves in

air condition system.

Spec: R-134a / R-134a Extend


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-1153 WINDOW HOLDER

Special design with scale to inject the dye and pack oil for R134a and R12 system.

Capacity: 1/4 oz. (7.5ml) to 2 oz. (60ml)

JTC-1242 SPARK PLUG WIRE PLIERS

Length: 200mml

Small design is good to use in a narrow

space.

In order to fit the angle of the electric

wire, the head of the remover uses a

special curve design, the special design

on the head of the remover is holding

the electric wire tightly.

JTC-1248 ELECTRIC CIRCUIT TESTER

Voltage: 6 - 24dcv

Wire length: 4.5mt

8A safety gear inside. The automatic power

failure will start when voltage is over the

limit.

This tool can test the positive and negative

voltage.

Tests continuity in switches, relays, diodes &

fuses, and wiring harnesses.

Polarity test cables and sockets.

Find short circuits and bad earths fast.


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-1249 CORDLESS CIRCUIT TESTER

Sharp probe tip covered with brass

protection cap, and checks function of car

lights faster & easier.

Check range: 6 – 12, 24v.

JTC-1260 A/C SPRING LOCK COUPLING TOOLS

Special design for removing the spring

lock coupling in A/C system.

Two tools in a set for the different size of

coupling.

Applicable: Toyota after 2000

JTC-1261 METAL CASE BATTERY BRUSH

Designed for cleaning the battery

terminals.

Can use on both sides.


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-1301 RADIO REMOVAL TOOL KIT

Applicable: BENZ, BMW, VW, AUDI, FORD, and American cars.

JTC-1354 FIN STRAIGHTENING TOOL

Made of stainless steel.

Special design to clean & straighten the

evaporator fin.

JTC-1358 DISCONNECTION TOOL SET

All the disconnect tools you need to work

with spring locking coupling, fuel line,

and transmission cooler line.

Contents:

o Spring locking tool:

3/8" (red), 1/2" (blue), 5/8"

(black), 3/4" (white)

o Fuel line disconnect tool:

3/8" (yellow), 1/2" (green)

o Fuel line fitting disconnect tool:

5/16" (gray), 3/8" (cyan)

o FORD / GM quick disconnect tool: 1/2" (black)


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-1438 MULTI-PURPOSE CONNECTER SET

Various connectors.

It is a perfect circuit checking tool.

You can use it to adjust and check the

problem of car rapidly and accurately.

Contents:

o 5KΩ Potentiometer (Variable Resister) x 2

o Various automotive flat terminals x 48

o Various automotive circular terminals x 24

o 1 to 2 connector x 2

o 1 to 1 connector x 4

o LED Stroboscope x 2

o Acicular Probe x 4

o Probe x 2

o Alligator clip x 2

o SRS connector x 2

JTC-1507 COIN TYPE SPARK PLUG GAUGE

Testing range: 0.6 ~ 2.4 mm (0.020 ~ 0.100 IN)

JTC-1529 TERMINAL TOOL SET

Contains 12-pieces which specifications

are various.

Use for installing and removing the

terminal by most cars.


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-1609 A/C COMPRESSOR CLUTCH REMOVER KIT

Replace clutches found on FS6, C171, 6P &

148 computer.

GM R4 & R6, HR-6, DA-6 & V5 A/C

compressors.

Compressors of Sanden SD505, 507, 508,

510, 575, 708 and 709.

2 & 3 hole puller plate fits most clutches, the

mechanical force does the pulling job.

JTC-1633 SPARK PLUG WIRE PLIERS

The spark plug wire pliers is specially

designed for removing hard to reach high

voltage lean wire.

Good insulated handle and the grooves

avoid any sliding down in operation,

Especially on Mercedes-Benz.

Length: 220mm

JTC-1704 ELERTRIC CIRCUIT TESTER

Power on type tests 6, 12, and 24 volt

circuits.

For wire breaks, short, fuses, lamps,

relays armatures, etc.

75mm inspection probe with point cover.

120cm long 16# wire with alligator clip.


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-1827 A/C, FUEL LINE DISCONNECT TOOL SET

Easily disconnect air conditioning lines and

quickly connect fuel lines.

Size include: 1/4", 5/16", 3/8", 1/2", 5/8",

3/4", 7/8"

JTC-1834 A/C SPRING LOCK COUPLING TOOLS

Used on 1981 the current Ford cars and

pickups having spring lock connection on

the A/C system.

For 3/8", 1/2", 5/8" and 3/4" couplers.

JTC-3205 CRIMPING TOOL

Applicable: Use with the automotive terminals and open barrel terminals.


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-4056 SPECIAL LIGHT BULB PLIERS

Special pliers for installing and removing

wedge base bulbs, e.g. bulb in blower

control switch on VW Passat 1996, seat

Leon bulb in ambient air switch on OPEL

Astra F, MERCEDES-BENZ and RENAULT

passenger cars.

Blades made of special steel with plastic

protective caps, pliers with solid plastic

body.

JTC-4081 20-PCS RADIO REMOVAL TOOL SET

Universal tool for installing and removing

radio on car.

Applicable: VW, AUDI, Mercedes Benz, Skoda, BMW, FORD.

JTC-4082 46-PCS RADIO REMOVAL TOOL SET

Universal tool for installing and removing

radio on car.

Applicable: BENZ, BMW, FIAT, OPEL, VW,

AUDI, FORD, SKODA, PORSCHE, and etc.

Applicable radio brand: KENWOOD, SONY, PIONEER, PANASONIC, CLARION, BLAUPUNKE, BECKER, and etc.


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-4088 R-1234yf QUICK COUPLER SET

For the new system R-1234yf.

Enclosed the high side and low side

couplers.

The valve core puller is adjustable.

Special designed for high pressure system.

JTC-4137 12V / 24V SURGE PROTECTOR

Provides protection against electrical devices

from electrical surges and spikes generated by

welding units. This prevents the need to

disconnect batteries result in the loss of stereo

and other memories.

Product dimension: 50 x 30 x 110 mm.

Max. Input Voltage: DC 35V

Power Cord: red / black, 450mm(L), 10AWG

Suitable for DC 12V, DC24V lead-acid batteries.

Input Voltage: DC12V or DC24V

Peak forward Surge current: 200 amp at 8.3ms

Max. Surge Capability: 1500W at 1ms

JTC-4195 10-PCS A/C, FUEL LINE DISCONNECT TOOL SET

(ELBOW)

For separating quickly disconnect fittings on fuel

and cooler lines.

Unique offset design allows for access in confined

or obstructed areas.

Easy, one-handed operation.

Material: Plastic

Contents:

o JTC-4195-1 (Dark Grey) Size: 1/2"

o JTC-4195-2 (Blue) Size: 5/8"

o JTC-4195-3 (Black) Size: 3/4"

o JTC-4195-4 (Silver) Size: 7/8"

o JTC-4195-5 (Red) Size: 5/16"

o JTC-4195-6 (Gold) Size: 3/8"

o JTC-4195-9 (Jacinth) Size: 3/16"

o JTC-4195-8 (Purple) Size: 3/8"

o JTC-4195-9 (Orange) Size: 1/2"

o JTC-4195-10 (Light Green) Size: 1/2"


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-4196 LED HEAVY DUTY ELECTRIC CIRCUIT TESTER

Dual color LED indicates red for power (high)

and green for ground (low).

Heavy-duty probe.

6' (1.8m) long heavy-duty 18 gauge dual

leads with battery clips and spring strain

relief.

High – impact plastic body.

High impedance tester protects computer

circuitry.

Services 6, 12, 24 Volt systems.

JTC-4237 LED CONNECTOR TESTING SET

Contents:

o 1 pc LED testing light

o 2 pcs testing probes red & black

The probe – made from stainless steel for

easier testing.

The LED shows yellow light when connecting with positive pole and shows red light for negative pole.

JTC – 4446:

JTC-4446 CURRENT LEAKING DETECT KIT

Check the current leaking without losing computer

memory.

Provide a safe and quick way to detect the leakage or

consumption of the electricity on the car.

Connect method:

o Use the test clamp to connect with the car

battery.

o Use the OBD2 test clamp to connect to the

backup battery.

o Disconnect the negative battery terminal

from the car battery to begin the test. (This

method can be a power supply when you

change the battery.)

Max load: DC32V / 20A

Measurement Range: 0.01A~19.99A

Contents: o TERMINAL CURRENT CLAMP x 1

o OBD2-CURRENT CLAMP x 1

o Current tester x 1 o Fuse x 2 o Puller of blade fuse x 1 o Puller of mini fuse x 1


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-4499 REFRIGERANT MANIFOLD GAUGE WITH MAGNETIC

BELT

Patent magnetic belt designed can easily mount on

compatible surface or hook on non – magnetic

surface.

Window type integrated aluminum frame, provide

complete fit and easy operation.

Applicable for refrigerant R12, R22, R134A, and

R1234yf.

Gauge size: 80mm dimension with protective rubber

cover

o High Pressure: 0-500psi/ 0-35 kg/cm²

o Low pressure: 0-350psi/ 0-24 kg/cm²

o Vacuum: 0 ~ -30inHg/ 0 ~ -76 cm/Hg

Hose size: 60" length black hose, Red, Blue and Yellow

nuts at the front for discrimination. 600psi working

pressure & 3000psi burst pressure.

With a bearing at the bottom of the coupler, the hose

will not be released while shaking.

Optional couplers for different refrigerant.

JTC-4534 RELAY PLIERS

Use for removing the electrical relays on

most vehicles.

Specially designed handle and tips for

narrow space usage.

The tips of the pliers are angled to fit slots or the edge of relay cover.

JTC-4551 INFRARED THERMOMETER (ECONOMY)

Same function as JTC–1407

Applicable range: -20 ~ 320°C (-4 ~ 608°F)


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-4565 DUAL ANGLE BRASS LINE BENDING PLIERS

Special dual purpose design, capable for

bending 3/16" and 1/4" OD tube.

By using this tool can prevent damage to the

tube, especially in narrow space.

Specially designed handle and unique head

keeps the handle in line with the tubing for

proper leverage, even during work.

JTC-4608 DIGITAL BATTERY TESTER

Display: 3 LED (Green, Yellow, Red).

No internal battery.

Test leads: 31 in. / 80 cm.

Application: 12V battery

Operating range: 200 ~ 1200CCA (SAE)

Rating system: SAE, DIN, EN, INE, CA

Test discharged battery: Down to 7V

Voltmeter: 7V ~ 15V

Tolerance: CCA: <+/- 10%

Resolution: 1 CCA

JTC-4609 DIGITAL BATTERY TESTER WITH PRINTER

Backlit display: 2 – lines, 16 – characters LCD

Thermal printer built inside.

Printing paper width: 37mm

Test code function can be added.

Test leads: 31 in. / 80 cm.

Software includes seven languages: English,

French, Spanish, Germany, Italian, Portuguese,

and Japanese.

Application: 6V & 12V batteries.

Operating range: 40 ~ 2000CCA (SAE)

Rating system: SAE, DIN, EN, IEC, JIS (Battery type

No.)

Test discharged batteries: Dow to 1.5V

Voltmeter: 1.5V ~ 30V

Tolerance: CCA: <+/- 15%, +/-0.05V

Resolution: 1 CCA


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-4657 8-PCS A/C DISCONNECTION TOOL SET

All the disconnection tools you need to work

with spring locking coupling, fuel line, and

transmission cooler lines.

Content:

o Aluminum disconnect tool:

1/4" (black)

5/16" (red)

3/8" (yellow)

1/2" (blue)

o Two ends disconnect tool:

5/16" ~ 3/8"

o Long disconnect tool: 1/2"

o Round disconnect tool: 1/2"

o Two point disconnect tool & rubber cap x 4

JTC-4688 23–PCS TERMINAL RELEASE TOOL SET

Special design to release terminals from

the plastic connectors without damaging.

Release terminals on most body wiring

connectors.

Applicable: suitable for most vehicles

JTC-4790 ELECTRIC TEST CONNECTOR SET

Economic type connector set are

designing for car factory demand.

You can nimbly use it on the adjustment

and assistant the technician checking the

car problem rapidly and accurately.

Contents:

o 1 pc 5kΩ Potentiometer (Variable

resister)

o 2 pcs LED stroboscope

o 1 pc wire checking clips

o 6 pcs various automotive flat terminals

o 2 pcs Probe

o 1 pc SRS connector

o 2 pcs Alligator clip

o 4 pcs Acicular probe

o 4 pcs 1 to 1 connector


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-4801 EXTRA LONG HIGH SIDE QUICK COUPLER

Total length: 85mm; O.D. : φ 26mm

The valve core puller is adjustable to fit

the different valve core.

Special extra-long design for narrow

space or deep hole.

Applicable: BMW 2004 later, VOLVO S series and many new models.

JTC-4870 ELECTRIC CIRCUIT TESTER (GENERAL & HYBRID

CAR)

Compatible with current 12V system plus

newer 42V system.

Safe for low current circuits since tester

only draws 3 milliamps at 12V.

Automatic voltage identification with

blue for 12V and red for 42V systems.

Two super – bright LEDs for visibility

under all conditions.

New crystal – clear handle provides 360° visibility, even in bright light.

JTC-4872 RUBBER SPARK PLUG REMOVER / INSTALLER

Flexible shaft permits access from many angles.

Easily insert and remove hard-to-reach spark

plugs with the flexible shaft tool.

Removing: use it to take out spark plugs from

deep hole.

Installing: use it to insert spark plugs into cylinder

grooves, and adjust it for installation.

Length: 330mm


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-5621 AUTOMATIC WIRE STRIPPER & CRIMPER

The easy stripper cutters are made by

precision machines and HRC55-60 blade cuts

wire fast and smoothly.

Applicable:

o Stripper range: AWG 24-10 (0.2 ~ 6.0mm2)

o For insulated terminals: AWG 22-10

(0.5 ~ 6.0mm2)

o For non-insulated terminals: AWG 22-10

(0.5 ~ 6.0mm2)

o For auto ignition terminals: 7 - 8mm

JTC-5622 TIE GUN

Fasten and automatic cut ties with

adjustable bundling pressure.

Applicable: Tie thickness up to 1.6mm,

Tie width from 2.2 to 4.8mm

JTC-5629 BATTERY TERMINAL CRIMPING TOOL

Specially designed to provide a better

way to prevent over crimping and a neat

clean appearance.

It is essential tool for replacing or

repairing battery cable terminal ends.

Applicable: Terminal soze from 6 ga. To

4/0.


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-5632 TUBE CUTTER & FLARING TOOL

Contents:

o Tube cutter: 1/8" ~ 1-1/8"

o Flaring tool: 3/16", 1/4", 5/16", 3/8",

7/16", 1/2", & 5/8"

Another kit JTC-5632M with metric size: 4, 6, 8, 10, 12, 14, 16mm.

JTC-1360A VALVE CORE REMOVER & INSTALLER TOOL KIT

Service valve cores without losing the system

charge.

Unique design offers a locking device that holds

the shaft in place while removing or installing the

valve cores.

Contents:

o Valve assembly

o Standard valve core remover / installer

o GM large bore valve core remover / installer

o JRA R134 valve core remover / installer

o Volvo and 8mm valve core remover / installer

o R134a H φ16 connector

o R134a L φ13 connector

o 5/16" FL swivel connector

o 1/4"FL swivel connector o Adapter 1/4"M x 3/16"F

o Adapter 1/4"M x 1/2" ACME F

o H14 Wrench

o Two sides valve core remover

JTC-1719A AUTO COMPUTER MEMORY UNIT

Maintains the memory of vehicle radios,

clock & computer functions when battery

is disconnected.

Simply attach a 9 volt battery & plug the

tool into cigarette lighter.

Keeps settings up to 4 hours


JTC AUTO TOOLS 678 – 876 – 3470


Suwannee, GA, 30024

JTC-1720A ADJUSTABLE SPARK GAP TESTER

Rapidly, accurately, safely, conveniently to judge

the quality of ignition system, depends on

difference types of car condition and adjust the

different gaps.

To judge the quality of coil according to spark

color and distance.

The car factory choose the appropriate coil

depends on engine and ignition system.

The airtight design to prevent the high volts

leakage.

Cylinder Pressure Adjustment Range

9.5 : under 1CM

9.5:1-10.5:1 1 – 2CM

10.5:1-11.5:1 2.5CM

JTC-4614B MULTI–FUNCTIONAL BATTERY TESTER (12V /

24V)

Functions: Battery testing: 12V common Lead –

Acid & AGM Battery Generator test, starting test.

Backlit display: 60 x 32mm (64 x 12B LCD)

Test leads: 100 cm

Voltmeter: 9 - 15 VDC (12V batteries)

Operating range: 100 - 1700 CCA (SAE)

Tolerance: CCA: <± 10% <± 0.1V

Rating system: CCA, DIN, EN , IEC, JIS

Electronic logic test – to test through low–

frequency signals without external load large

battery tester. To repeat the test, no safety

concerns.

Language: English, Chinese, and etc. But only one

mode can be selected as you purchase.

JTC-4726A OBD-II POWER SUPPLY ADAPTER

Special adapter to prevent lose any data from

replacing the battery.

Connect the adapter from battery to OBD-II plug

for continue power supply.

Optional power supplier: ①12V battery ②9V

dry battery

The adapter with 2 LEDs to show if the battery is

enough.

9V

12V

battery & electrical · 2017-07-18 · battery & electrical jtc auto tools 678 – 876 –...

Documents