GB Cordless Driver Drill Instruction Manual

F Perceuse-Visseuse sans Fil Manuel dinstructions

D Akku-Bohrschrauber Betriebsanleitung

I Trapano avvitatore a batteria Istruzioni per luso

NL Snoerloze boor-schroevendraaier Gebruiksaanwijzing

E Atornillador Taladro Inalmbrico Manual de instrucciones

P Furadeira / Parafusadeira a Bateria Manual de instrues

DK Akku-slagskruetrkkerbor Brugsanvisning

GR

TR Akl Matkap Tornavida Kullanma klavuzu

BDF459

2

1 2

3 4

5 6

7 8

4

9

1011

8

7A B

65

1

2

3012970 012128

012971 012972

012973 012975

012974 012976

12

3

16

17

9 10

11 12

13

1415

18

012977 012798

012979 012978

4

ENGLISH (Original instructions)Explanation of general view

1 Red indicator2 Button3 Battery cartridge4 Star marking5 Switch trigger6 Lamp

7 Reversing switch lever8 Speed change lever9 Adjusting ring10 Graduation11 Arrow12 Sleeve

13 Groove14 Hook15 Screw16 Bit holder17 Bit18 Vent

SPECIFICATIONS

Due to our continuing program of research and devel-opment, the specifications herein are subject to changewithout notice.

Specifications and battery cartridge may differ fromcountry to country.

Weight, with battery cartridge, according to EPTA-Pro-cedure 01/2003

ENE034-1

Intended useThe tool is intended for drilling and screw driving in wood,metal and plastic.

GEA010-1

General Power Tool Safety WarningsWARNING Read all safety warnings and all

instructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instructions for futurereference.

GEB088-1

CORDLESS DRIVER DRILL SAFETY WARNINGS1. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.2. Hold power tool by insulated gripping surfaces,

when performing an operation where the cuttingaccessory may contact hidden wiring. Cuttingaccessory contacting a live wire may makeexposed metal parts of the power tool live andcould give the operator an electric shock.

3. Hold power tool by insulated gripping surfaces,when performing an operation where the fas-tener may contact hidden wiring. Fasteners con-tacting a live wire may make exposed metal partsof the power tool live and could give the operatoran electric shock.

4. Always be sure you have a firm footing.Be sure no one is below when using the tool inhigh locations.

5. Hold the tool firmly.6. Keep hands away from rotating parts.7. Do not leave the tool running. Operate the tool

only when hand-held.8. Do not touch the drill bit or the workpiece imme-

diately after operation; they may be extremelyhot and could burn your skin.

9. Some material contains chemicals which may betoxic. Take caution to prevent dust inhalationand skin contact. Follow material supplier safetydata.

SAVE THESE INSTRUCTIONS.WARNING:

DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto safety rules for the subject product. MISUSE orfailure to follow the safety rules stated in this instruc-tion manual may cause serious personal injury.

Model BDF459

Capacities

Steel 13 mm

Wood 38 mm

Wood screw 6 mm x 75 mm

Machine screw M6

No load speed (min1)High (2) 0 1,500

Low (1) 0 400

Overall length 179 mm

Rated voltage D.C. 18 V

Battery cartridge BL1815 BL1830

Net weight 1.5 kg 1.7 kg

5

ENC007-7

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) batterycharger, (2) battery, and (3) product using bat-tery.

2. Do not disassemble battery cartridge.3. If operating time has become excessively

shorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.

4. If electrolyte gets into your eyes, rinse them outwith clear water and seek medical attention rightaway. It may result in loss of your eyesight.

5. Do not short the battery cartridge:(1) Do not touch the terminals with any conduc-

tive material.(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as nails,coins, etc.

(3) Do not expose battery cartridge to water orrain.

A battery short can cause a large current flow,overheating, possible burns and even a break-down.

6. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50C (122F).

7. Do not incinerate the battery cartridge even if itis severely damaged or is completely worn out.The battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.9. Do not use a damaged battery.

SAVE THESE INSTRUCTIONS.Tips for maintaining maximum battery life1. Charge the battery cartridge before completely

discharged.Always stop tool operation and charge the bat-tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-ture at 10C 40C (50F 104F). Let a hot bat-tery cartridge cool down before charging it.

4. Charge the battery cartridge once in every sixmonths if you do not use it for a long period oftime.

FUNCTIONAL DESCRIPTIONCAUTION:

Always be sure that the tool is switched off and the bat-tery cartridge is removed before adjusting or checkingfunction on the tool.

Installing or removing battery cartridge (Fig. 1)CAUTION:

Always switch off the tool before installing or removingof the battery cartridge.

Hold the tool and the battery cartridge firmly wheninstalling or removing battery cartridge. Failure tohold the tool and the battery cartridge firmly may causethem to slip off your hands and result in damage to thetool and battery cartridge and a personal injury.

To remove the battery cartridge, slide it from the toolwhile sliding the button on the front of the cartridge.To install the battery cartridge, align the tongue on thebattery cartridge with the groove in the housing and slip itinto place. Insert it all the way until it locks in place with alittle click. If you can see the red indicator on the upperside of the button, it is not locked completely.

CAUTION: Always install the battery cartridge fully until the red

indicator cannot be seen. If not, it may accidentally fallout of the tool, causing injury to you or someonearound you.

Do not install the battery cartridge forcibly. If the car-tridge does not slide in easily, it is not being insertedcorrectly.

Battery protection systemThe tool and battery are equipped with a protection sys-tem. This system automatically cuts off power to the toolto extend battery life.The tool will automatically stop during operation if thetool and/or battery are placed under one of the followingconditions: Overloaded:

The tool is operated in a manner that causes it to drawan abnormally high current.In this situation, release the switch trigger on the tooland stop the application that caused the tool to becomeoverloaded. Then pull the switch trigger again torestart.If the tool does not start, the battery is overheated. Inthis situation, let the battery cool before pulling theswitch trigger again.

Low battery voltage:The remaining battery capacity is too low and the toolwill not operate. In this situation, remove and rechargethe battery.

NOTE: Those temperature-sensitive protection and low-volt-

age protection is applied only when the tool is usedwith a battery cartridge with a star mark. (Fig. 2)

Switch action (Fig. 3)CAUTION:

Before inserting the battery cartridge into the tool,always check to see that the switch trigger actuatesproperly and returns to the OFF position whenreleased.

To start the tool, simply pull the switch trigger. Tool speedis increased by increasing pressure on the switch trigger.Release the switch trigger to stop.

Lighting up the lamp (Fig. 4)CAUTION:

Do not look in the light or see the source of lightdirectly.

Pull the switch trigger to light up the lamp. The lampkeeps on lighting while the switch trigger is being pulled.The lamp goes out just after releasing the trigger.

6

NOTE: Use a dry cloth to wipe the dirt off the lens of the lamp.

Be careful not to scratch the lens of lamp, or it maylower the illumination.

Reversing switch action (Fig. 5)CAUTION:

Always check the direction of rotation before operation. Use the reversing switch only after the tool comes to a

complete stop. Changing the direction of rotationbefore the tool stops may damage the tool.

When not operating the tool, always set the reversingswitch lever to the neutral position.

This tool has a reversing switch to change the directionof rotation. Depress the reversing switch lever from the Aside for clockwise rotation or from the B side for counter-clockwise rotation.When the reversing switch lever is in the neutral position,the switch trigger cannot be pulled.

Speed change (Fig. 6)CAUTION:

Always set the speed change lever fully to the correctposition. If you operate the tool with the speed changelever positioned halfway between the 1 side and 2side, the tool may be damaged.

Do not use the speed change lever while the tool isrunning. The tool may be damaged.

To change the speed, first switch off the tool and thenslide the speed change lever to the 2 side for highspeed or 1 side for low speed. Be sure that the