beach bound straw tote - weallsew...beach bound straw tote step seven set up your sewing machine...

materials and tools

1

Beach Bound Straw Tote

materials and tools

• ¾ yard fabric-backed straw/raffia fabric

• ¾ yard fabric for lining (I used outdoor upholstery for easy clean-up)

• ¾ yard fusible fleece

• Scrap of fabric for starfish

• Paper-backed fusible web

• ½ yard of ¾ʺ-wide ribbon

• All-purpose polyester thread

• Size 90/14 Universal (all-purpose) or Jeans sewing machine needle

• Seed beads

• Cotton embroidery floss

• Hand-sewing needle

• Purse handles

• Walking foot (BERNINA Walking Foot #50) or Dual Feed feature

Created by Melissa Mortenson

Inspired by the warm weather? Can’t wait for summer to arrive? You’ll soon need a tote for all your summer essentials. Using straw fabric for the outside and outdoor upholstery for the lining gives this bag just enough body and weight and makes it both fun and practical. Add a beaded starfish to the front to give it just the right amount of sparkle.

Visit Melissa at her blog, Polka

Dot Chair, at polkadotchair.com

2


step three

Trace the starfish pattern onto a piece of paper-backed fusible web. Fuse to the wrong side of the starfish fabric following the manufacturer’s instructions.

Cut out the starfish along the lines.

step one

Using needle and thread, bead the center of the starfish arms. Just use a random pattern; it does not need to be perfect.

step four

Cut 3ʺ squares from the lower corners of the bag front and back pieces.

Cutting guide: Cut two 17ʺ wide by 15ʺ tall raffia rectangles for the bag

front and back. Cut two 17ʺ wide by 17ʺ tall lining fabric rectangles for the

bag interior. Cut one 17ʺ wide by 18ʺ tall lining fabric rectangle for the

interior pockets.

step two

3


step seven

Set up your sewing machine with a size 90/14 needle.

step six

Using cotton embroidery thread, stitch around the outer edges of the starfish applique to secure it in place.

step five Fuse the starfish to the lower left corner of the bag front just

above the cut out notch. It’s not going to stick to the straw fabric very well, but don’t worry. You’ll hand-stitch it down.

If your sewing machine has a Creative Consultant function like my BERNINA 710 (onscreen sewing advisor), open it and select the Jeans setting.

step eight

4


step ten

step nine Select the Seams icon.

If your machine has Dual Feed, attach Jeans Foot #8D or Reverse Pattern Foot #1D and engage Dual Feed.

If your machine does not have Dual Feed, attach a walking

foot (BERNINA Walking Foot #50).

step twelve

Select the green checkmark icon to automatically set your machine settings.

If your machine does not have a Creative Consultant, set it

for a straight stitch with a stitch length of 3.60 mm.

step eleven

Suggested settings appear on the screen. Size 90/14-100/16 Jeans needle Cordonet/topstitching thread (we’ll use regular thread) Jeans Foot #8 Presser foot presser = 55

5


step thirteen Stitch the bag front to the bag back, right sides together,

using a ½ʺ-wide seam allowance. Stitch the lower edge of the bag, again using a ½ʺ-wide seam

allowance.

Apply fusible fleece to the wrong side of each bag lining piece.

step fifteen

Pinch the bottom corners of the bag so the side seams match up with the center bottom seam.

Stitch across the corners using a ¼ʺ-wide seam allowance. Press the seam allowances open.

Turn the bag right side out.

step fourteen

6


step seventeen

Cut 3” squares from the lower corners of the lining pieces.

Fold the pocket rectangle in half, right sides together. Stitch across the lower edge (opposite the fold) and press the seam allowances open.

Turn the pocket right side out and press.

step sixteen Select Heavyweight Woven in the Creative Consultant,

then select the Seams icon. Select the green checkmark to automatically adjust the settings.

If your machine does not have a Creative Consultant, set it

for a straight stitch with a length of 3.5 mm.

step nineteen

Baste the pocket to the lining. Sew down the center of the pocket, top to bottom, to divide

the pocket.

step eighteen

Edgestitch close to the folded edge; this will be the top edge of the pocket.

Position the pocket on one lining piece, just above the cut

out notch, aligning the side edge. Pin in place.

7


step twenty-two

Slip the bag lining into the bag, wrong sides together. Fold over the excess lining to the right side of the bag; pin

in place.

step twenty-one

Turn under ½ʺ to the wrong side along the top edge of the bag; press.

step twenty Stitch the bag lining pieces together the same way you

stitched the outside pieces of the bag together.

step twenty-three

Cut the ribbon into four 6ʺ-long pieces. Fold the ribbon in half, right sides together, and stitch close to

the edge. Turn right side out.

Sew only through the binding and seam allowances, close to the inner folds.

8


step twenty-six

Switch your sewing machine back to the Jeans setting. Stitch close to the lower edge of the turned-under lining,

beginning at one side seam and stitching all the way around the bag. Make sure the ribbons are caught in the stitching, but make sure they don’t get folded over.

step twenty-five

Pin the four ribbon loops to the inside of the bag at the placement marks with ½ʺ of each loop showing above the upper edge.

step twenty-four Locate the centers of the upper edges of the bag front and

back. Lay the purse handles down so they are centered on the

bag front and back. Mark the handle placement with pins.

step twenty-seven

Stitch around the bag again, this time close to the top of the bag. Again, be careful to secure the ribbons in place, making sure they aren’t folded over.

9


step twenty-eight Attach the purse handles to the ribbon loops, following the

instructions included with the handles.

10


Starfish Applique Pattern

Visit Melissa at her blog, Polka

Dot Chair, at polkadotchair.com

beach bound straw tote - weallsew...beach bound straw tote step seven set up your sewing machine...

Documents