beo-2000m 5 s year 5 s year extended extended delivery ... · mtbf >279000 h according to...
TRANSCRIPT
Also available with
pre-assembled chassis
Art. No. BEO-2000MC
180W continuous fanless power on 2 x 4“ Very compact design High power density High efficiency up to 93.5% Meet Class I and Class II (without FG) +12 V fan output Low Standby consumption: <0.3 W Wide temperature range -20…+80 °C
Input voltage 90…264 V AC (100…240 V AC nominal), active PFC
Input frequency 47…63 Hz (50…60 Hz nominal)
Input current <1 A (240 V AC)
Inrush current <100 A (240 V AC)
Efficiency 92…93.5 % depending on model (230 V AC)
Standby consumption <0.3 W
Hold up time 10 ms (115 VAC)
Protection Short circuit protection: Hiccup mode (auto recovery) Overtemperature protection Overvoltage protection: switch off (recycle AC input to restart)
Insulation voltage Input / Output 6196 V DC (2 x MOPP) Output / FG 2122 VDC (1 x MOPP) Input / FG 2122 VDC (1 x MOPP)
Insulation resistance Input / Output min. 100 MΩ (500 V DC test voltage)
Line regulation ±0.5 %
Load regulation ±1 %
Earth leakage current <310 µA (264 VAC/60 Hz)
Touch current* <70 µA (264 VAC/60 Hz)
Safety/EMC IEC 60601-1:2005+A1:2012 (Edition 3.1) EN 60601-1:2006+A1:2013 (Edition 3.1) ANSI/AAMI ES60601-1:2005 (3rd Edition), CE
Temperature Operating: -20…+80 °C / Storage: -40…+85 °C
Derating See diagram
Max. operation altitude 3000 m
MTBF >279 000 h according to MIL-HDBK-217F at +25 °C / 115 VAC
Humidity Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing
Dimension (W x Dx H) 101.6 x 50.8 x 37.6 mm ±1 mm
Weight (net) 0.25 kg
*For class I construction with PE connection
BEO-2000M200 Watt
Extended Extended FanlessFanless Eco EcoMedical Medical
Medical applicationsPow
er supplies
Te c h n i c a l d a t a
Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de
Operation OperationDelivery5 YE
ARS
Delivery5 YE
ARS
NEW
*1 180W max. fanless with minimum input voltage 220VAC.*2 200W max. continuous power with 10CFM fan and minimum input voltage 220VAC (see derating diagrams).Ripple and noise was measured by a 20MHz bandwidth limited oscilloscope with connected 0.1µF and 10µF capacitors at the output.As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
Article Output Output Output current Ripple & Efficiency No. voltage min fanless*1 max load*2 Noise (with 10CFM fan) BEO-2012M A1 +12 V 0 A 15.0 A 16.6 A <150 mVpp 92.0 % A2 +12 Vfan 0 A 0.3 A 0.5 A
BEO-2024M A1 +24 V 0 A 7.5 A 8.3 A <240 mVpp 93.5 % A2 +12 Vfan 0 A 0.3 A 0.5 A
BEO-2048M A1 +48 V 0 A 3.7 A 4.1 A <480 mVpp 93.0 % A2 +12 Vfan 0 A 0.3 A 0.5 A
Medical applicationsPow
er supplies
Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de
Optional Accessories
For detailed information please visit our website www.bicker.de and refer to the article number.
X1-054 | AC input cable
2-pole, length 600 mm, AWG18, ends open
With10 CFM fan
0
50
100
150
200
-20 -10 0 10 20 30 40 50 60 70 80Ambient temperature (°C)
Load
Ambient temperature (°C)
Load
With natural convection
0
50
100
150
200
-20 -10 0 10 20 30 40 50 60 70 80
180
Derating BEO-2000M
220…264 VAC
90…219 VAC
CB-105-3-600 | AC input cable
3-pole, length 600 mm, AWG18, ends open
Medical applicationsPow
er supplies
Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
50 70 90 110 130 150 170 190
Effic
ienc
y [%
]
Pout [W]
Eff 230V Eff 115V
Efficieny curves BEO-2000M
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
50 70 90 110 130 150 170 190
Effic
ienc
y [%
]
Pout [W]
Eff 230V Eff 115V
12 V
24 V
Medical applicationsPow
er supplies
Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de
FAN
ACNACL
31.0
max
1.6
5.0
max
10 m
m
94.0
4-Ø 3.
2
43.2
3.8
50.8
3.8
101.6
10CFM
+Vo
-Vo
FAN V+FAN V-
LED
(M3)
(M3)
Tolerance ±1 mm
Spec
ifica
tion
is su
bjec
t to
chan
ge w
ithou
t not
ice.
Err
ors e
xcep
ted.
Sta
tus a
s at:
29.0
5.20
18
Drawing BEO-2000M
Also available with pre-assembled chassis
Art. No. BEO-2000MC
Input connector (CN1): VHR-3N or similarOutput connector: Screw terminal M3
Mounting recommendation:To ensure best heat dissipation, it is recommended to mount the BEO-2000M directly on metal chassis. Please use 4x distance bolts with 5 mm length betweenPCB and application chassis.