HPHT SUBSEA WELLHEAD SYSTEMS

15,000 psi20,000 psi

BigBore™ IIe

The BigBore IIe Wellhead is the only system that is fatigue tested to over 90+ million bending cycles. It has been tested to Normal - 7.4 MM ft-lbs, Extreme - 8.8 MM ft-lbs, Survival - 11.5 MM ft-lbs rated loads per API 17TR7. The BigBore IIe Wellhead DXe™ locking profile is approved by both I3P and BSEE per API 17TR8. Operator’s existing BigBore II-H inventory can be converted to BigBore IIe.

The BigBore IIe Subsea Wellhead System is highly flexible to accommodate a complex and heavy casing program that satisfies deep HPHT well objectives, while providing superior structural strength and unmatched fatigue life.

NEXT GENERATION WELLHEAD EQUIPMENT

BBIIe

BigBore™ IIe SUBSEA WELLHEAD SYSTEM

The BigBore IIe Subsea Wellhead System meets the severe demands of HPHT well environments, eliminates trips, and saves you money.

• Reduces capital expense by eliminating the need for extra drilling and production lockdown devices

• Reduces operational expenses by eliminating the number of trips into the well

• Seal Assembly provides 2 million lbs. hanger lockdown capacity to resist thermal and pressure loads

• High load capacity meets requirements of next generation 20 Ksi drilling rigs and HPHT well designs

• DXe™ locking profile offers industry best structural capacity and fatigue resistance proven with validation testing

• Structurally tested and qualified to normal, extreme and survival loads per API 16A 4th Edition and API 17 TR7

• Full scale Wellhead and BOP connector fatigue tested

• Metal-to metal seal assembly qualified to 20,000 psi WP and 35° to 350° F per API 6A Appendix F PR2 Group 4, with additional dynamic cycles, metal seal endurance testing with gas

F E A T U R E S A N D B E N E F I T S

2

Accommodates a variety of casing programs

18 ¾" BigBore IIeWellhead Housing

DXe™ Gasket Profile

36" Wellhead Housing

18 ¾" BigBore IIe Seal Assembly

18 ¾" BigBore IIe Seal Assembly

DXe Locking Profile

First PositionCasing Hanger

Annulus Access Valve

16" Seal Assembly

16" Casing Hanger

22" / 23" x 16"Supplemental Adapter Housing

22" x 18"Supplemental Adapter Housing

Second PositionCasing Hanger

SlopeIndicator

Mud Stick

36" x 28"Supplemental

Adapter Housing

28" Positive StopCasing Hanger

Hydrate Diverter(Optional)

36" Casing28" Casing

(Other Sizes Optional)22" Casing16" Casing14" Casing

(Other Sizes Optional)

18" Seal Assembly

18" Positive StopCasing Hanger

3

The BigBore IIe Subsea Wellhead System maximizes life of field integrity.

• Designed for 15,000 psi (27") and 20,000 psi (30") rated working pressure and H2S service between 35° to 350° F with all metal-to-metal sealing

• Supports 8.8 million lbs of end-load (combination of casing weight and test pressure) at the bottom internal landing / load shoulder profile

• Highest available combination of bending, tension and load capacities using the Dril-Quip DXe™ profile

• Utilizes landing adapters positioned in 22"/23" surface casing joints for landing 18" and 16" supplemental casing hanger systems

• 18" and 16" casing, casing hangers and testable / retrievable / replaceable seal assemblies can pass through 21" OD drilling riser, 18-3/4" BOP Stack and BigBore IIe wellhead housing

• All casing hangers and seal assemblies are run, set and tested on drill pipe running string in a single trip

• Time saving bit-runnable wear sleeves and wear busings available

• High pressure wellhead actively locked into low pressure wellhead with 2.0 millions lbs of preload to unitize both conductor and surface strings for superior bending load reaction and fatigue resistance

• Utilizes field proven BigBore II-H HPHT metal-to-metal, gas tight sealing technology

• Incorporates ROV-assisted annulus monitoring and shutoff system for all casing strings cemented back to surface

• Large cement return flow-by areas on all casing hanger systems

• Available with hydrate diversion plate option

• Complex casing programs accommodated

• All component designs are based on existing BigBore II-H technology and long successful BigBore II field history

Next Generation Wellhead SystemBigBore™ IIe is fully verified and validation tested for structural capacity and high fatigue resistance

1 8 ¾ " B i g B o r e ™ I I e S u B S e a w e l l h e a d S y S t e m

4

Inner Lock Ring

Sealing Element

Upper Body

Metal-to-Metal Sealing Area

Resilient Elastomer Backup

Metal-to-Metal Sealing Area

Pressure Assist Puller Element

Metal-to-Metal Sealing Area

Resilient ElastomerBackup

Metal-to-Metal Sealing Area

1 8 ¾ " B i g B o r e ™ I I e S e a l a S S e m B l y

Gap accommodates * stackup tolerances * pressure from above or below the seal

• Seals in a recessed groove in the wellhead bore, which protects against scoring in the seal bore

• Locks to the wellhead using the outer lock ring to hold down the seal and prevent excessive movement of casing hanger and seal when casing strings are exposed to thermal growth loading

• Seal assembly outer lock ring as 2,000,000 lbs end-load lockdown capacity

• Successfully tested in gas medium per API 6A PR-2 requirements with zero leakage and Group 4 Dynamic seal endurance testing with no elastomers

• Weight set metal-to-metal seal assembly

• Seal assembly easily retrieved with hydraulic tool

• Seal assembly can be run separately with seal assembly running tool

• Casing hanger seal assembly running tool has a 2.5 million lb. load capacity

• Casing hanger seal assembly running tool retrieves seal assembly if it doesn’t test and lockdown

• Same dependable running tool design used for over 25 years

The BigBore IIe Seal Assembly delivers bidirectional high pressure liquid and gas tight metal-to-metal sealing, and provides high lockdown capacity.

5

v e r I f I c a t I o n a n d v a l I d a t I o n t e S t I n g

SuBSea wellhead SyStemS In-houSe verIfIcatIon analySIS and valIdatIon teStIng IS extenSIve

• Design verification analysis using fine mesh 2-D and sophisticated 3-D FEA modeling tools used to evaluate the behavior of the wellhead system.

• Design and capacity validation testing is tested with machines capable of applying multiple load scenarios to a complete wellhead system.

• Adjustments are made to the 3-D FEA model to deliver more precise results.

• Dril-Quip’s validation test machine is test machine than can deliver the forces required to test the system as a whole.

• Dril-Quip uses a fatigue test on the whole wellhead system to evaluate stresses between the wellhead and wellhead connector.

* 20 million ft-lbf of bending loading

* 12.75 million lbf of tension / compression loading and 8 million lbf of compression loading

horIzontal teSt machIne - capaBIlItIeS

* 6+ million lbf of simulated casing weight

* Internal / External pressure and associated pressure end loads to test specimen capacities

Dril-Quip has taken a "systems" approach to evaluating the strength characteristics and overall performance of the Subsea Wellhead System.

6

SuBSea wellhead and componentS are QualIfIed to the lateSt InduStry StandardS

• The latest API standards are used for both design verification and validation testing.

• Wellhead components have been tested and qualified to API 17D 2nd Edition and 6A (PR2) 20th Edition requirements.

• High pressure/high temperature wellhead system components have been tested and qualified to API 6A Appendix F Group 4 in addition to dynamic seal testing over and above API industry requirements.

• Complete system integrated verification and validation testing assures individual component capacities match or exceed the system capacity requirements.

Annulus Seal Assembly with Environmental Controls

Fatigue Test Machine with Specialty Connector Test Specimen

Data Acquisition and Control System for Seal Testing

7

W O R L D W I D E S A L E S & S E R V I C E

DRIL-QUIP Western HemisphereD���-Q���, Inc. World Headquarters6401 North Eldridge Pkwy.Houston, Texas 77041Tel +1 713 939 7711Fax +1 713 939 8060

D���-Q��� do Brasil, LTDA.Macaé, BrazilTel +55 22 2791 8950Fax +55 22 2791 8989

TIWWestern HemisphereTIW Corporate HeadquartersP.O. Box 35729Houston, Texas 77235Tel +1 713 729 2110Fax +1 713 728 4767

DRIL-QUIP

Asia PacificD���-Q��� Asia Pacific Pte. Ltd.No. 80 Tuas West DriveSingapore, 638417Tel +65 6861 0600Fax +65 6861 5700

DRIL-QUIP Eastern Hemisphere Stoneywood Park, DyceAberdeen, Scotland, UK AB21 7DZTel +44 1224 727000Fax +44 1224 727070

TIW Eastern Hemisphere TIW U.K. LimitedUnit D Abbotswell RoadWest TullosAberdeen, Scotland, UK AB12 3ADTel +44 1224 894411Fax +44 1224 896171

TIW Asia PacificTIW International Inc.9 Tuas Avenue 12Singapore 639031Tel +65 6545 0110Fax +65 6545 0137

Engineering, Manufacturing,Sales & Service

Sales & Service

Sales Representatives

DRIL-QUIP.COM012219