biodata - alagappa chettiar college of engineering...
TRANSCRIPT
1
BIODATA
M.E, PhD in Technical Teaching with 33 years of Experience in CAD CAM,ROBOTICS and Surface
Engineering, in A.C.College of Engineering and Technology, Karaikudi, Tamilnadu, India
1. Name : A.ELANGO
2. Father’s Name : V.R.Arumugam
3. Date of Birth : 23.07.1960 (Twenty Third July Nineteen Sixty)
4. Age : 54Years
5. Nationality : Indian
6. Marital Status : Married – 2 Sons
7. Address
a) Official : PRINCIPAL i/c Professor of Mechanical Engineering,
Alagappa Chettiar College of Engineering and
Technology
Karaikudi – 630 004, Tamilnadu, India.
b) Residential : Plot No : 17,Kuruchipuravu,
Dr.Sridhar Eye Hospital South,
Karaikudi,
Sivagangai District,
Tamilnadu,
India- 630003.
Phone : 0091 4565 225297
Mobile : 0091 9843963007
Email ID : [email protected]
2
8. Qualification :
Degree Specialization Institution & University Class Year
S.S.L.C
PTC
Bachelor of
Engineering
Master of
Engineering
Ph.D.,
-
-
Mechanical
Engineering
Production
Engineering.
Mechanical
Engineering
Surface Engineering
SMS Vidyalaya, Karaikudi
Alagappa Polytechnic,
Karaikudi
Alagappa chettiar college
Engineering of Engg. and
Technology, Karaikudi,
Tamil Nadu, India.
Government of College of
Technology Coimbatore,
Tamil Nadu, India.
Anna University, Chennai
First
First
First
First
2002 -
Registered
1976
1977
1983
1990
Awarded
On
8.6.2009
9. Title of Ph.D., Thesis:
CORROSION INHIBITION OF 57S ALUMINIUM ALLOY AS ANODE IN NaOH BY ZnO
AND POLYANILINE.
3
SERVICE DETAILS:
Designation
Lecturer in Mechanical Engineering
Assistant Professor in Mechanical
Engineering
Associate Professor in Mechanical
Engg.
Professor and HOD of
Mechanical
Engineering.
and
VICE PRINCIPAL
PRINCIPAL i/c
From
24.09.1984
02.11.1987
02.04.1990
15.09.1994
15.12.2000
26.12.2012
01.11.2013
01.02.2017
To
01.11.1987
01.04.1990
14.9.1994
14.12.2000
25.12.2012
Till now
31.01.2017
Till now
Institution
A.C.College of Engg.
And Tech., Karaikudi,
Tamilnadu, India.
Govt. College of Technology
Coimbatore, Tamil Nadu India.
A.C.College of Engg.
And Tech., Karaikudi,
Tamilnadu, India.
A.C.College of Engg.
And Tech., Karaikudi,
Tamilnadu, India.
A.C.College of Engg.
And Tech., Karaikudi,
Tamilnadu, India.
A.C.College of Engg.
And Tech., Karaikudi,
Tamilnadu, India.
A.C.College of Engg.
And Tech., Karaikudi,
Tamilnadu, India.
A.C.College of Engg.
And Tech., Karaikudi,
Tamilnadu, India.
Professor and HOD of Mechanical Engg.- From 26.12.2012 to Till Date 26.12.2016 (4 YEARS)
Associate Professor - From 15.12.2000 to 25.12.2012 (12 YEARS)
Assistant Professor - From 15.09.1994 to 14.12.2000 (6 YEARS)
Lecturer - From 24.09.1984 to 14.9.1994 (10 YEARS)
Lecturer - From 17.8.1983 to 17.2.1984 (6 MONTHS)
Total No. of years--- to Till Date 26.9.2015 (32 YEARS, 6 MONTHS)
4
SUBJECT TAUGHT:
1 Industrial Robotics and Expert Systems*
2 Computer Aided Graphics*
3 Mechatronics
4 Manufacturing Technology
5 Principal of Management
6 Total Quality Management
7 Engineering Drawing and Graphics
8 Machine Drawing
9 Engineering Mechanics - Dynamics
10 Machine Design and Drawing
11 Design of Transmission Systems
12 Computer Aided Design
13 Computer Aided Manufacturing *
14 Computer Aided Integrated Manufacturing
15 Computer Graphics*
16 Geometric Modeling*
17 Finite Element Analysis*
18 Integrated Product Design and Development*
*For student of M.E.Degree Course in “Computer Aided Design (Mechanical)” at
A.C. College of Engg, and Tech., Karaikudi Tamil, India.
ACADEMIC CONTRIBUTIONS:
1 Active participation at the various phases of the introduction and running of the M.E.Degree
Course in “Computer Aided Design (Mechanical)” at the A.C.College of Engg. and Tech.
Karaikudi, Tamilnadu, India.
2 Submittrd in May 2000 a proposal to the Ministry of Human Resources Development for
starting a P.G. Degree Course in “Computer Aided Design” and requesting Direct Central
Assistance for “Setting up of CAD Laboratory”.
3 Director Central Assistance of Rs,12 lakhs was granted in Feb.2001 for Setting up of the
“CAD Lab”. Utilizing the above funds a “CAD Lab” was set up in Oct.2002.
4 Submitting a proposal under Part II Scheme to the Government of Tamilnadu for starting
P.G.Degree Course in “Computer Aided Design” and Requesting for Funds for Development
of the required infrastructure.
A Government Order was issued in granting approval for starting the Post Graduate Degree Course in
“Computer Aided Design” at A.C. College of Engg. and Tech., Karaikudi, Tamilnadu, India.
Framing the detailed Syllabi and Rules and Regulations for the above P.G.Degree
Course.
Submitting the proposal for starting the M.E.Degree Course in “Computer Aided
Design (Mechanical)” to the All India Council for Technical Education, Approval of
the AICTE was given in a short time.
Applying for affiliation of the Anna University for the above P.G.Degree Course.
Affiliation was given in due course.
The M.E.Degree Course was inaugurated and the first batch of students were admitted
in October,2001.
Served as the Assistant Professor for the P.G.CAD section right from the inception.
Also served as the Faculty Advisor for the students of the M.E.Degree Course.
5
Duration from Oct.2000 to till now.
Government of Tamilnadu, based on the earlier proposals submitted under Part II
Scheme, sanctioned a Rs.31 Lakhs in 2000 for expanding the infrastructure of PG
CAD Lab. The entire amount was spent towards purchase of additional computer
Software and Peripherals.
Submitted in 1999 a proposal for „Modernisation of Metrology Laboratory‟ to the
Ministry of Human Resources Development. A sum of Rs.5 Lakhs was granted as
Direct Central Assistance in 2000. Utilizing the above funds a “Measuring Profile
Projector” was purchased.
Submitted in August,1999 a proposal for “Modernization of Special Machine Shop” to
the All India Council for Technical Education. A sum of Rs.6 Lakhs has been granted
by AICTE for the above purpose in April 2000. Utilizing the above funds a „Gear
Hobbing Machine and Cetreless Grinding Machine” were purchased.
Indian National Board of Accreditation has given approval of our department for 5
years accreditation from 2004 to 2009.
From Technical Education Quality Improvement Programme funds in 2004, the
following machines and CAD Software were purchased.
1.CNC LATHE (MAX TURN) 6. RAPID PROTOTYPING MACHINE
2.CNC MILLING MACHINE (MAX MILL) 7.MACHINE VISION SYSTEM
3.6 AXIS ARTICULATED ROBOT
4.SINGLE SPINDLE AUTOMAT MACHINE
5.TURRET LATHE
Cad Software :
1.Uni Grapics ,Pro E,.ANSYS, CATIA, CADEM, Fluent and Edge CAM
OTHER PROFESSIONAL ACTIVITIES
1 Member of Board of Studies in “Mechanical Engineering” – UG and PG, and Production
Engineering-UG” of the Periyar University, Salem.
2 Examiner/Chief Examiner in the Central Valuation of the answer scripts of the M.E., and B,E.,
Degree Examinations of the Anna University, University of Madras, Bharathidasan University.
Madurai – Kamaraj University, Periyar University, Annamalai University, Thiagarajar College
of Engineering, Madurai & Government College of Technology, Coimbatore.
3 Question Paper Setter for Anna University, Bharathidasan University, Thiagarajar College
Engineering, Madurai, Government College of Technology, Coimbatore and PSG College of
Technology, Coimbatore.
4 Internal/External Examiner of B.E., Degree Practical Examination of Anna University,
University of Madras, Periyar University & Madurai _- Kamaraj University.
5 Internal/External Examiner of M.E., Degree Viva-Voice Examination of Anna University,
University of Madras & Government College of Technology, Coimbatore.
OTHER ACTIVITIES:
1 Served as Hotel Superintendent (Accounts) / Hostel Superintendent (Stores & Purchase) /
Deputy Warden/Resident Tutor at A.C.College of Engg. And Tech., Karaikudi, Tamilnadu,
India.
2 Served as Transport Officer at A.C.College of Engg. And Tech., Karaikudi, Tamilnadu,
India.
3 Serving as an Area Commander, Home Guards, Sivagangai District, Tamilnadu from
16.06.2001 to 15.03.2006.
6
ADDITIONAL INFORMATION:
1 Short Term courses on “Programming Operation of CNC Machines” at Regional
Engineering College, Trichy, Tamilnadu.
2 Undergone advanced course on „CNC Milling Programme‟ at advanced training institute
Govt. of India, Ministry of Labour, Chennai, Tamilnadu.
3 Short term course on “CAD for Plastic” at CIPET, Chennai, Tamilnadu.
4 Winter school programme on Waste Heat Recovery participated at CECRI, Karaikudi.
5 Under TEQIP Programme, a short term course on”GENERAL MANAGEMENT FOR
SENIOR EXECUTIVES” at Arcot, Conducted by Govt. College of Engg. Salem.
6 Undergone ProE foundation course at CADD centre, karaikudi,Tamilnadu,India during Oct
2006.
7 Attended 2 day seminar on TECHNOMATRIX – UG SIMULATION SOFTWARE at
Chenni during 31,6,2007 to 1.1.2007.
Recent Project guided /me for the Final Year Mechanical Engineering Students.
1. Design and Development of Spring Loaded Through
2. Selection of Soot Blower
3. Design and Fabrication of Compound Die For Stopper Plate
4. Pollution And Control of Automobile Emission
5. Design And Fabrication Of Template Model Used For Copy Turning Lathe
6. Programming in CNC Machines
7. Reduction of Snags in 966E Loader
8. Simplification of CNC Programming for Value Components
9. Interfacing the PC with the CNC Lathe
10. Some trails on Squeeze casting of Aluminium Alloys
11. Applications of SPC Technologies in Centre less Grinding Process
12. Software for Grouping of Components through Group Technology
1 Served as Member of the Inspections Squad for supervises inspection on the contact of
Anna University Examinations.
2 Served as Observer of the All India Engineering Entrance Examination, (AIEEE)
conducted by the Central Board Secondary Education, New Delhi.
3 Served as Representative of the permanent committee for the conduct of Common
Entrance test to supervise the examination process of B.E.,/B.Tech., and M.B.A,/
M.C.A.M degree courses.
4 Served as subject expert for the Annamalai Polytechnic College, Chettinadu,
Sivagangai District Tamil Nadu, India. Staff selection committee meeting to ratify/
approve the promotion of Instructors to the Post of Lecturer
5 Received a certificate of recognition in producing 100% results in the subjects of
i) Computer Integrated Manufacturing Systems (III Semester)
ii) Computer Application in Design ( I Semester) of M.E. (Computer
7
Aided design) branch in the Anna University Examination held in
November 2004.
6. Served as a Chairman for the second technical session of 2 days National conference
“Amara” – 2005” on 18.02.2005 at 2 P.M. PSNA College of Engineering Technology,
Dindigul, Tamilnadu India.
Guiding Phd Research works for the following titles
in different Universities
1.Sathyabama University,Chennai,Tamilnadu,India
1 vdJ.S.Ganesan (PhD Research Scholar) f;F” Evaluation of Diesel engine using diesel castor oil blend with CFD analysis” vd;w
jiyg;gpy; PhD gl;lg; gog;gpw;fhd viva exam 14/08/2015 njjpy; Sathyabama University,Chennai,Tamilnadu,
India y; eilb;gw;wJ.
2. Anna University,Chennai,Tamilnadu,India
1. Prof.S.Karthikeyan (PhD Research Scholar)
vdJ (PhD Research) S.Karthikeyan f;F “ AN EXPERIMENTAL INVESTIGATION ON THE ROLE OF NANO METAL OXIDE
ADDITIVES ZnO AND CeO2 IN METHYL ESTERS OF CANOLA, REFINED PALM STEARIN AND GRAPE SEED OIL ON WORKING
CHARACTERISTICS OF CI ENGINE.” vd;w jiyg;gpy; PhD gl;lg; gog;gpw;fhd viva exam 09/01/2015 njjpy; eilb;gw;wJ.
2.Mr.R.Jeyaram (PhD Research Scholar)
Predicting the corrosion performance of pipe materials under critical environments
3. Prof.M.Manapparai (PhD Research Scholar)
Pipe stress analysis enabled by KBS
4. Prof.A.P.Mohanraj (PhD Research Scholar) “ Design and Analysis of Tracked omni directional wheel for Industrial
robot” .” vd;w jiyg;gpy; PhD gl;lg; gog;gpw;fhd viva exam 24.03.2017 njjpy; eilb;gw;wJ.
5.Prof.D.Somasundaram (PhD Research Scholar)
Carbon credits of fishing boat diesel engine running on higher ethanol concentration
6.Prof.R.Ravikumar (PhD Research Scholar)
Scheduling Optimization of Cellular Manufacturing Systems By Intelligent Techniques
7. Prof.D.Vidya Prakash (PhD Research Scholar)
8
Kinematic study of wheeled mobile robots on uneven terrain
8.Prof.Kalaiselvan PhD Research Scholar)- Laser Beam welding of Ti/Al alloys dissimilar metals Microstructure and
Mechanical Properties .” vd;w jiyg;gpy; PhD gl;lg; gog;gpw;fhd viva exam 7.4.2017 njjpy; eilb;gw;wJ.
9.Prof.K.Arinayagam ( PhD Research Scholar)
Sustainable Manufacturing of Tire based on green engineering Principle
10 .Prof.S.Sargunanathan( PhD Research Scholar)
Studies On Performance Enhancement of Solar Photovoltaic Cells Using Effective Cooling Methods
11. Prof.R.Ramkumar( PhD Research Scholar- Full Time )
Study on Mechanical Properties of Epoxy Nanocomposites through Chemical Hybridization of CNT – Al 203
12. Prof.P.Kreethivasan( PhD Research Scholar- Full Time )
Analysis and Performance evaluation on cryogenically treated M2 Molybdenum High Speed Tool Steels
9
LIST OF PUBLICATIONS
International Journals:32 National Journals:6
International Conference:8 National Conference:5
International Journals
1. S.Kannan, K. Ramanathan , and A. Elango”A New Hybrid Approach to optimize the MRR and
Tool wear of EDM for Al/TiC Composites” published in International Journal of Applied
Mathematics & Information Sciences _Appl.Inf.Sci.10 No 6.1-9(2016)
2. K. Kalaiselvan, A. Elango, and N.M. Nagarajan “Crack and Surface Morphology on
Dissimilar Metal Butt Joints Using Laser Beam Welding” published in the International
Journal of Manufacturing Technology Research - Volume 7 Issue 3-4 - pp. 129-140.
3. S. Sargunanathan a,n, A.Elango b, S.TharvesMohideen c “Performance enhancement of solar
photovoltaic cells using effective cooling methods”: A review published in International
Journal of Renewable and Sustainable Energy Reviews - 64(2016)382–393
4. A. P. Mohanraj, A. Elango, and Mutra Chanakya Reddy” Front and Back Movement
Analysis of a Triangle-Structured Three-Wheeled Omnidirectional Mobile Robot
by Varying the Angles between Two Selected Wheels published in The Scientific World
Journal Volume 2016Article ID 7612945 (2016).
5. K. Kalaiselvan, A.Elango, N. M. Nagarajan “EVALUATION OF STRENGTH AND
FRACTURE MODE ALONG WELDMENT OF Ti/Al SHEET METAL JOINT USING LASER BEAM WELDING” published in International Journal of Advanced Engineering Technology E-
ISSN 0976-3945 _ Int J Adv Engg Tech/Vol. VII/Issue I/Jan.-March.,2016/15-18 (2016)
6. K. Kalaiselvan, A.Elango, N. M. Nagarajan “STUDIES OF HARDNESS DISTRIBUTION
IN Ti/Al DISSIMILAR METAL JOINTS USING LASER BEAM WELDING” published in
International Journal of Advanced Engineering Technology E-ISSN 0976-3945 _Int J Adv Engg Tech/Vol. VII/Issue I/Jan.-March.,2016/117-120 (2016)
7. S. Karthikeyan, A. Elango & A. Prathima “The effect of cerium oxide additive on the performance and emission characteristics of a CI engine operated with rice bran biodiesel and its blends published in International Journal of Green Energy ISSN: 1543-5075
(Print) 1543-5083 (Online) Published online: 21 Mar 2016 VOL. 13, NO. 3, 267–273 (2016) 8. A.P.Mohanraj,A.Elango, S.Harishankar,R.Chiranjeevi balaji , S.Ganapathisubramanian (2015) Design
and Experimental Movement analysis of four Normal Wheeled Mobile robots with Square structured
Omni Directional wheeled Robot published in the International Journal of International Journal of
Applied Engineering Research ISSN 0973-4562 Volume 10, Number 19 (2015)
10
9. A.P.Mohanraj,A.Elango, , K.Balaji,S.Sridhar,M.PrasannaKumar(2015)”Design and Motion analysis of Three-Single row Omni Directional Wheeled mobile robot in “Y” structure published in International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 19 (2015)
10. K. Kalaiselvan, A. Elango (2014) “Studies on Distortion of Dissimilar Thin Sheet Weld Joints Using Laser Beam Welding” published in International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering Vol:8, No:12, 2014 pp 2012-2017 World Academy of Science, Engineering and Technology.
11. K. Kalaiselvan, A. Elango(2014)” Studies of Interfacial Microstructure and Mechanical Properties on
Dissimilar Sheet Metal Combination Joints Using Laser Beam Welding” published in International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering Vol:8 No:11, 2014 pp 1843-1850 World Academy of Science, Engineering and Technology.
12. K. Kalaiselvan, A. Elango, N. M. Nagarajan (2014) “Artificial Neural Network Application on Ti/Al Joint
Using Laser Beam Welding – A Review” published in International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering Vol:8 No:8, 2014 pp 1459-1463 World Academy of Science, Engineering and Technology.
13. K. Kalaiselvan, A. Elango, N.M. Nagarajan (2014) “Effect of Laser Welding Properties on Ti/Al
Dissimilar Thin Sheets – A Review” published in International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering Vol:8 No:10, 2014 pp 1710-1714 World Academy of Science, Engineering and Technology.
14. K. Kalaiselvan, A. Elango, N.M. Nagarajan, N. Mathiazhagan(2014)” Laser Beam Welding of Ti/Al
Dissimilar Thin Sheets - A Literature Review” published in International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering Vol:8 No:10, 2014 pp 1715-1719 World Academy of Science, Engineering and Technology.
15. K. Kalaiselvan, A. Elango, N. M. Nagarajan(2014)” Comparative Studies on Dissimilar Metals thin
Sheets Using Laser Beam Welding - A Review” published in International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering Vol:8 No:10, 2014 pp 1701-1704 World Academy of Science, Engineering and Technology
16. K. Kalaiselvan, A. Elango, N. M. Nagarajan, N. Mathiyazagan (2014) ”Studies on Ti/Al Sheet Joint
Using Laser Beam Welding – A Review “published in International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering Vol:8 No:4, 2014 World Academy of Science, Engineering and Technology
17. A.P.Mohanraj, A.Elango, D.Ragavendhiran,P.Vignesh Raja, K. Ashok (2014)”Design and movement
analysis of single roller Omni Directional Wheeled Robot for different assembly structures” published in International Journal of Applied Mechanics and Materials Vols. 592-594 (2014) pp 2324-2328.
18. A.P.Mohanraj, Raghul Krishna.S, S.S.Kannan, M.Rajkumar, A.Elango (2014)” Design and Analysis of
a Coconut Harvesting Maneuver” published in International Journal of Scientific & Engineering Research, Volume 5, Issue 5, May-2014 508 ISSN 2229-5518 pp 508-512
19. A.P.Mohanraj, A.Elango, S.Karthick Karuppiah, M.Dinesh Babu, P.Manikanda Prabhu. (2014)”
DESIGN AND PERFORMANCE ANALYSIS ON MOVEMENT OF SQUARE, TRIANGULAR AND OCTAGONAL STRUCTURED OMNIDIRECTIONAL MOBILE ROBOT” published in International Journal of Scientific & Engineering Research, Volume 5, Issue 5, May-2014 513 ISSN 2229-5518 p 513-519
20. S.Ganesan,Elango.A,(2014) “Multi Objective optimization of diesel engine emission characteristics with
blends of lemon grass oil using grey Relational analysis” in Pensee (ISSN: 0031-4773), Vol. 76. No.4 ,
pp 56-67, 2014, France.
11
21. Ganesan, S, Elango, A. (2013), “Performance Analysis of CI Engine using blends of Castor Oil and
Ethanol ”, International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME), Vol.1,pp. 73-77.
22. S.Ganesan,Elango.A,(2014),Eluri Vamsi Krishna,A.Balaji “Influence of Nano catalyst on Emission Characteristics of Di Diesel Engine with Blends of lemon grass oil Using Taguchi Approach ” in International Journal of Applied Engineering Research (ISSN: 0973-4562), Research India publication, Vol. 9. No.21 , pp 9941-9949, 2014
23. S.Karthikeyan, A.Elango , P.Marimuthu & A.Prathima (2013)‟Performance, Combustion and Emission
Characteristic of a Marine Engine Running on Grape Seed oil Biodiesel Blends with Nano additive‟
Paper has been accepted with corrections in the Indian Journal of Geo-Marine Sciences
24. M.Manapparai , A.Elango (2013) „KNOWLEDGE BASED PIPE SUPPORT SPAN OPTIMIZATION WITH RESPECT TO
MAXIMUM BENDING STRESS‟ Paper has been accepted with corrections in the International Journal of Mechanical Science and Technology 00 (2012) 0000~0000.
(Manuscript Received 000 0, 2013; Revised 000 0, 2013; Accepted 000 0, 2013)
25. Ganesan S, A. Elango(2013), „Performance Analysis of CI Engine using blends of Castor Oil and
Ethanol ‟- Paper has been published in the International Journal of Mining, Metallurgy & Mechanical Engineering. 2013- ISSN 2320-4060(online), IJMMME Vol.1,Issue 1 P 62-66
26. PR.Periyanan, U. Natarajan, A. Elango(2011), „Optimization of parameters on material removal rate in micro-WEDG process‟- Paper has been published in the International Journal of Engineering, Science and Technology . AUG 2011- ISSN 2141-2820, IJEST-NG Vol. 3, No.9 P 66-76
27. Elango.A, V.M. Periasamy, M. Paramasivam, E. Rakesh, (2010) "Novel polymeric inhibitor for
corrosion of 57S aluminium in 2M NaOH solutions", Paper has been published in the International Journal of Anti-Corrosion Methods and Materials, ACMM 2009- ISSN 0003-5599 Vol. 57 Iss: 1, pp.3 - 5
28. Elango A., Periasamy V.M. and Paramasivam M. (2009), „Study on Polyaniline-ZnO used as corrosion inhibitors of 57S Aluminium in 2M NaOH solution” – Paper has been published in the International Journal Anticorrosion Materials and Methods – ACMM 2009- ISSN 0003-5599, Vol. 56, No.5 P 266-270
29. Umadevi G. and Elango A., (2008), ‘Effect of D.C.Voltages using HCL for the synthesis and characterization of polyaniline‟, published in Portugaliae electrochemical acta_399_08, The Portuguese Electrochemical society Journal, Portugal.
30. Karthikeyan, S, Elango A & Parthima A Feb 2014, „Diesel Engine Performance and Emission Analysis using Canola oil Methyl Ester with the Nano sized Zinc Oxide Particles‟, Indian Journal of Engineering and Materials Sciences, vol. 21, pp. 83-87.
(Annexure – 1)(Impact Factor: 0.641)
31. Karthikeyan, S, Elango A & Parthima A( 2014), „Performance and Emission Study on Zinc Oxide Nano Particles Addition with Pomolion Stearin Wax Biodiesel of CI Engine‟, Journal of Scientific and Industrial Research, vol. 73, pp. 187-190. (Annexure – 1)(Impact Factor: 0.500)
12
32. Karthikeyan, S, Elango A & Prathima, A, Raja, R May (2014), „Environmental Effects of Nano Additive Co3O4 in Grape Seed Oil biofuel fuelled in CI Engine ', Research Journal of Chemistry and Environment, vol. 18, pp. 14-18. (Annexure – 1) (Impact Factor: 0.64)
National Journals
1 Elango A. (2003), „Surface Modification at a glass‟, published in the bulletin of Pure and
Applied Sciences, New Delhi, India, Vol.33E, No.2, pp. 385-393.
2. Elango A., Periasamy V.M. and Paramasivam M. (2004), „Polarization of 57S Aluminium
used as galvanic anode in 2M NaOH‟, published in the National Journal of Metallurgy and
Materials Science, Jamshedpur, India, Printed in India NML, ISSN 0972 – 4257, Vol. 4, Oct.
Dec. 2004, pp. 247.252
3. Elango A., ‘Corrosion behaviour of diffusion coatings deposited by Slurry Chromising,
Electro plating and Aluminium spraying onto mild steel panel‟, published in the National
Journal of Metallurgy and Material Science, Printed in India, NML, ISSN 0972 – 4257, Vol.
46, No.2, April – Jan. 2004, pp. 123-133.
4. Elango A., Periasamy V.M. and Paramasivam M. (2006), „Anodic and Cathodic Polarization
of 57S Aluminium alloy‟, published in the Journal of Manufacturing Engineering, India, ISSN
0973-6867, Vol. 1,iisue 1 2006, pp. 24.
5. S.Ganesan,A.Elango, “Influence of Injection Pressure on Emission Characteristics of Di Diesel Engine
with Blends of Biodiesel”, Indian Journal of -Applied Research (ISSN No: 2249-555X), Vol, no 10,
2013, pp 247-248.
6. S.Ganesan, A.Elango, “Effect of nanocatalyst on emissions of Direct injection CI engine using blends
of castor oil”, Indian stream Research journal (ISSN No.: 2230-7850), Vol.4, No.4, 2014, pp 1-3.
International Conference
1. A.P.Mohanraj, A.Elango, . (2016), „Experimental Investigation and Path deviation Analysis of Square structured Omni Directional Mobile Robot” presented and published in the proceedings of Second International Conference on Advanced Engineering and Technology for sustainable Development(ICAETSD 2016) during 19-20 February 2016 held at Karpagam College of Engineering..
2. A.P.Mohanraj, A.Elango, . (2015), „Design and Motion Analysis of 3 Single row omni directional wheeled mobile robot in “Y” Structure, presented and published in the proceedings of International Conference on Advanced Engineering and Technology for sustainable Development(ICAETSD 2015) during 4-6 March 2015 held at Karpagam College of Engineering...
3. A.P.Mohanraj, A.Elango, . (2015), „Design and Experimental movement analysis of 4 normal wheeled
mobile robots with square structured omni directional wheeled robot‟ presented and published in the proceedings of International Conference on Advanced Engineering and Technology for sustainable Development(ICAETSD 2015) during 4-6 March 2015.
13
4. Elango A., Periasamy V.M., and Paramasivam M. (2004), „Self Corrosion rate of different grades of Aluminium alloys used as Galvanic anodes in Alkaline Batteries‟, presented and published in the proceedings of Indo Japan International Conference on Damage Tolerant Design and Materials, IIT Madras, Chennai during 16-18 Dec. 2004.
5. Elango A., Periasamy V.M., and Paramasivam M. (2006), „Anodic and Cathodic Polarization of 57S
Aluminium alloy‟, presented in the International Conference on Damage Tolerant Design and Materials, National Engineering College, Kovilpatti,Tamilnadu during 6-8 Dec. 2006.
6. S.Ganesan,,A.Elango, “Performance Analysis of CI Engine using blends of Castor Oil and Ethanol ”, International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME), published in Emerald proceedings, ISBN No: 9789382242222. malasiaya 29-30 Dec. 2012, pp. 73-77.
7. S.Ganesan,.A.Elango, " Influence of nanocatalyst in the performance of Direct injection CI Engine using blends of castor oil ”, The International Conference on Advanced Nanomaterials and Emerging Engineering Technologies (ICANMEET-2013) ISBN No: 9781479913770.Sathyabama University 24-26 July. 2013, pp. 723-725.
8. Ganesan, S., Elango A., Eluri Vamsi Krishna and Balaji, A. (2014), “Taguchi Based optimization of engine parameters using nanocatalyst with blends of Biodiesel”, Sairam institute of Technology, pp. 353-357
9. K. Kalaiselvan ,A. Elango “Studies of Butt Joint Distortion on Ti/Al Dissimilar Metal using Laser Beam
Welding” The International Conference on INCAPIE'15 INTERNATIONAL CONFERENCE ON
ADVANCES IN PRODUCTION AND INDUSTRIAL ENGINEERING Organized by NIT TRICHY” on
20th & 21th FEB 2015 at NIT, Tiruchirappalli.
National Conference
1. Elango A. and Vijayasankar I. (2004), „Performance of Polyamine Rechargeable Battery‟,
presented and published in the proceedings of the National Conference on Recent Trends in
Mechanical Engineering (R-Time 2004) 23, 24.07.2004, SRES Engineering College,
Kopargaon Nagar, Maharashtra, India.
2. Elango A., Periasamy V.M. and Paramasivam M. (2005), „Study the influence of sulphonated
aniline as corrosion inhibitor on aluminium in alkaline medium” presented and published in
the proceedings of National Conference on Application oriented Nanomaterials (NANOMAT-
2005) - 10-11, March 2005, Department of Industrial Chemistry, Alagappa University,
Karaikudi, Tamilnadu, India.
3. Elango A., Umadevi G., Periasamy V.M., Paramasivam M. and Jayandhirani M. (2008),
„Influence of polyaniline as a corrosion inhibitor for commercial aluminium in alkaline
solutions‟, presented and published in the proceedings of National Conference on
NCRTPST -2008 Recent Trends in Polymer Science and Technology, Nov 21st and 22nd
2008.
4. Ganesan.S , A.Elango , Prakash Kumar, “Investigation of Emission Characteristics on Direct injection Engine using blends of castor oil with nanocatalyst”, National Conference on
14
Recent Advances n Mechanical Engineering (RAME-2014), pp 41-45, Saveetha University Feb 07, 2014
5. Ganesan.S ,A.Elango, “Emission analysis of CI engine using blends of castor oil methanol”, National Conference on Modeling, Simulation and Optimization (NCMSO 2013), ISBN No:978-81-924031-9-9, Vels University, Chennai, pp 1-5, 9th November, 2013.