bios setup utility : g41c-gs p1.00 : 1024mb/333mhz ddr2...
TRANSCRIPT
1
2
BIOS SETUP UTILITY
Main OC Tweaker H/W Monitor Boot Security ExitAdvanced
System Overview
System TimeSystem Date
[ :00:09][Tue 12/01/2009]
Use [Enter], [TAB]or [SHIFT-TAB] toselect a field.
Use [+] or [-] toconfigure system Time.
Select ScreenSelect Item
+- Change FieldTab Select FieldF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
14
BIOS VersionProcessor Type
Processor SpeedMicrocode UpdateCache Size
Total Memory
DDRII1DDRII2DDR3_1DDR3_2
: G41C-GS P1.00: Intel (R) Core (TM) 2 Duo CPU
E8200 @ 2.66GHz (64bit): 2666MHz: 10676/60C: 6144KB
: 2048MBDual-Channel Memory Mode
: 1024MB/333MHz DDR2_667
: None: 1024MB/333MHz DDR2_667
: None
3
BIOS SETUP UTILITY
Main Advanced H/W Monitor Boot Security Exit
Select ScreenSelect Item
Enter Go to Sub ScreenF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
OC Tweaker Settings
DRAM Timing Configuration
DRAM VoltageNB VoltageVTT VoltageGTLRef Voltage
[Auto][Auto][Auto][Auto]
If you adopt DDR3 1333pls. adjust jumper setMB before apply it.For FSB1333 CPU:FSB1 = 2-3
DRAM Frequency
Ratio CMOS SettingIntel (R) SpeedStep (tm) tech.Overclock Mode
[8]
[Auto][Auto]
8
CPU Frequency (MHz)PCIE Frequency (MHz)
[333][100]
1.96V1.23V1.20V0.63Vtt
[Auto]
Would you like to save current setting asuser defaults ?
4
BIOS SETUP UTILITY
DRAM Timing Control
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
OC Tweaker
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
DRAM tCL [Auto]666
1544
6434
DRAM tRCDDRAM tRPDRAM tRASDRAM tRFCDRAM tWRDRAM tWTRDRAM tRRDDRAM tRTP
[Auto][Auto][Auto][Auto][Auto][Auto][Auto][Auto]
DRAM tCLValueDDR2Min = 3Max = 7
DDR3Min = 5Max = 10
5
®
®
6
BIOS SETUP UTILITY
Main OC Tweaker H/W Monitor Boot Security Exit
Select ScreenSelect Item
Enter Go to Sub ScreenF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Advanced Settings
WARNING : Setting wrong values in below sectionsmay cause system to malfunction.
CPU Configuration
ACPI ConfigurationChipset Configuration
Storage ConfigurationPCIPnP ConfigurationFloppySuperIO ConfigurationUSB Configuration
Configuration
Options for CPU
BIOS Update Utility
ASRock Instant Flash
7
BIOS SETUP UTILITY
CPU Configuration Select the over clockmode.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Overclock Mode [Auto]
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
Enhanced Halt StateIntel (R) Virtualization tech.
Intel (R) SpeedStep (tm) tech.On-Demand Clock Modulation
CPU Thermal ThrottlingNo-Execute Memory Protection
CPU Frequency (MHz)PCIE Frequency (MHz)
[333][100]
Boot Failure GuardSpread Spectrum
[Enabled][Auto]
Ratio CMOS Setting [8]8
[Disabled][Enabled][Enabled][Disabled][Auto][Auto]
8
®
® ®
® ®
®
®
9
BIOS SETUP UTILITY
DRAM RCOMP STRENGTH Settings
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
DRAM CH0 RCOMP ODTValue
Min = 1Max = 63
DRAM CH0 RCOMP ODT [Auto]DRAM CH0 G0 (Data)DRAM CH0 G1 (Command)DRAM CH0 G2 (Control1)DRAM CH0 G3 (Control2)DRAM CH0 G4 (Clocks1)DRAM CH0 G5 (Clocks2)
[Auto][Auto][Auto][Auto][Auto][Auto]
DRAM CH0 RCOMP Settings : 54-0-11-6-6-6-6
DRAM CH1 RCOMP ODTDRAM CH1 G0 (Data)DRAM CH1 G1 (Command)DRAM CH1 G2 (Control1)DRAM CH1 G3 (Control2)DRAM CH1 G4 (Clocks1)DRAM CH1 G5 (Clocks2)
[Auto][Auto][Auto][Auto][Auto][Auto][Auto]
DRAM CH1 RCOMP Settings : 54-0-8-8-0-8-0
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Chipset Settings
DRAM RCOMP and tRD Configuration
Fixed Mode Operation
Intelligent Energy SaverPrimary Graphics AdapterShared MemoryPAVP ModeDVMT Mode Select
DVMT/FIXED Memory
Onboard HD AudioFront Panel
OnBoard Lan
[Enabled]
[Disabled][PCI][Auto][Disabled][DVMT Mode][Maximum DVMT]
[Auto][Enabled][Enabled]
Select ScreenSelect Item
+ - Change OptionF1 General Help
F10 Save and ExitESC Exit
F9 Load Defaults
Advanced
DRAM DLL SKEW Configuration
10
11
BIOS SETUP UTILITY
DRAM DLL SKEW Settings
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
DRAM CH0 CLKSET0 SKEW [Auto]DRAM CH0 CLKSET0 SKEW Info:0-0-0-0-0-0
DRAM CH0 CLKSET1 SKEW [Auto]DRAM CH0 CLKSET1 SKEW Info:0-0-0-0-0-0
DRAM CH0 CMD SKEW [Auto]DRAM CH0 CMD SKEW Info :0-0-0-0-0-0-0
DRAM CH0 CTRL0 SKEW [Auto]DRAM CH0 CTRL0 SKEW Info :0-0-0-0-0-0-0
DRAM CH0 CTRL1 SKEW [Auto]DRAM CH0 CTRL1 SKEW Info :0-0-0-0-0-0-0
DRAM CH0 CTRL2 SKEW [Auto]DRAM CH0 CTRL2 SKEW Info :0-0-0-0-0-0-0
DRAM CH0 CTRL3 SKEW [Auto]DRAM CH0 CTRL3 SKEW Info :0-0-0-0-0-0-0
DRAM CH1 CLKSET0 SKEW Info:1-5-1-1-0-128
12
13
®
®
14
BIOS SETUP UTILITY
ACPI Configuration Select auto-detect ordisable the STRfeature.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Suspend To RAM
Restore on AC/Power LossRing-In Power OnPCI Devices Power OnPS / 2 Keyboard Power OnRTC Alarm Power On
ACPI HPET Table
[Disabled]
[Power Off][Disabled][Disabled][Disabled][Disabled]
[Disabled]
®
15
BIOS SETUP UTILITY
Storage ConfigurationSet [Compatible]when Legacy OS(MS-DOS, Win NT)device is used.
Set [Enhanced]when Native OS(Win2000 / XP)is used.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
ATA/IDE Configuration [Enhanced]
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
IDE1 MasterIDE1 Slave
SATAII_1SATAII_2SATAII_3SATAII_4
[Hard Disk][Not Detected][Not Detected][Not Detected][Not Detected][Not Detected]
®
®
® ®
16
BIOS SETUP UTILITY
Primary IDE Master Select the typeof device connectedto the system.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Type
LBA/Large ModeBlock (Multi-Sector Transfer)PIO ModeDMA ModeS . M . A . R . T .32Bit Data Transfer
[Auto]
[Auto][Auto][Auto][Auto][Disabled][Enabled]
DeviceVendorSizeLBA ModeBlock ModePIO ModeAsync DMAUltra DMAS.M.A.R.T.
:Hard Disk:ST340014A:40.0 GB:Supported:16Sectors:4:MultiWord DMA-2:Ultra DMA-5:Supported
17
BIOS SETUP UTILITY
Advanced PCI / PnP Settings Value in units of PCIclocks for PCI devicelatency timerregister.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
PCI Latency TimerPCI IDE BusMaster
[32][Enabled]
Advanced
18
BIOS SETUP UTILITY
Floppy Configuration Select the type offloppy driveconnected to thesystem.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Floppy A [1.44 MB 3 "]12
19
BIOS SETUP UTILITY
Configure Super IO Chipset Allow BIOS to Enableor Disable FloppyController.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Serial Port Address [3F8 / IRQ4]
Parallel Port AddressParallel Port Mode
EPP VersionECP Mode DMA Channel
Parallel Port IRQ
[378][ECP + EPP][1.9][DMA3][IRQ7]
20
BIOS SETUP UTILITY
USB Configuration To enable or disablethe onboard USBcontrollers.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
USB Controller
USB 2.0 SupportLegacy USB Support
[Enabled]
[Enabled][Enabled]
21
BIOS SETUP UTILITY
Hardware Health Event Monitoring
Select ScreenSelect Item
F1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU TemperatureM / B Temperature
CPU Fan SpeedChassis Fan Speed
Vcore+ 3.30V+ 5.00V+ 12.00V
Power Fan Speed
: 37 C / 98 F
: 4722 RPM
: 1.216V: 3.248V: 5.136V: 12.091V
: 27 C / 80 F
: N / A: N / A
Main OC Tweaker Advanced Boot Security ExitH/W Monitor
Enable/DisableCPU Quiet FanFunction.
CPU Quiet Fan [Disabled]
22
BIOS SETUP UTILITY
Main OC Tweaker Advanced H/W Monitor Security Exit
Boot SettingsConfigure Settingsduring System Boot.
Select ScreenSelect Item
Enter Go to Sub ScreenF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Boot
Boot Settings Configuration
1st Boot Device2nd Boot Device3rd Boot Device
Hard Disk DrivesRemovable DrivesCD/DVD Drives
[1st Floppy Device][HDD: PM - HDS722580VL][CD / DVD: 3S - CD - ROM C]
23
BIOS SETUP UTILITY
Boot Settings ConfigurationDisabled: Displaysnormal POST messages.Enabled: Displays OEMLogo instead of POSTmessages.
Select ScreenSelect Item
+ - Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Boot
AddOn ROM DisplayBoot Logo
Boot From Onboard LANBootup Num-Lock
[Enabled][Auto][Disabled][On]
Full Screen Logo [Enabled]
24
BIOS SETUP UTILITY
Main OC Tweaker Advanced H/W Monitor Boot Exit
Install or Change thepassword.
Select ScreenSelect Item
Enter ChangeF1 General Help
F10 Save and ExitESC Exit
F9 Load Defaults
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Security
Change Supervisor Password
Change User Password
Security Settings
Supervisor Password : Not InstalledUser Password : Not Installed
25
BIOS SETUP UTILITY
Main OC Tweaker Advanced H/W Monitor Boot Security
Exit system setupafter saving thechanges.
F10 key can be usedfor this operation.
Select ScreenSelect Item
Enter Go to Sub ScreenF1 General Help
F10 Save and ExitESC Exit
F9 Load Defaults
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Exit
Save Changes and Exit
Discard Changes and ExitDiscard Changes
Load BIOS DefaultsLoad Performance Setup Default (IDE/SATA)Load Power Saving Setup Default
Exit Options