How to get 200% out of Your Boiler

Installation Services

Boiler installation is not easy by any means. After all, it involves engineering and aesthetic skills of the installation professional clubbed with the understanding of the local building codes. However, few small things that you take care of during the boiler installation process can go a long way in securing best efficiency and comfort in the long run, especially during the winter season.

Here are 5 things you can “never miss” during the boiler installation procedure.

1. Find a place that is easily accessible

Like your real estate property, finding a place for boiler installation can also have incredibly amazing results. If you don’t, you will not only end up spoiling the look of the space, but also create irreparable damage to the boiler setup.

Boiler installation should be done keeping in mind the distance from the main electric switches, nearest water tank and ventilation windows. For regular maintenance and clean-up, you don’t want to have a boiler installed in kitchen or somewhere close to your electric furnace.

For best boiler installation location, HVAC contractors Toronto recommend the availability of the best installation professionals in and around the city.

2. Radiator balancing It is hard to judge the impact of the boiler installation instantly. A misaligned boiler can create vibrations and noise during its operation. Moreover, boiler installation gone wrong will also create dangerous situation in the long run, with the risk of unit falling off from its cabinet every much imminent.

That’s why boiler installation Toronto contractors prefer to do a dummy full load test with bleeding radiators to ensure best service.

3. Checking boiler pressure

There could be instances when the boiler installation professional would ask you to avoid worrying about boiler pressure initially. Best HVAC contractors in Toronto recommend that the users should run the boiler as per the manufacturer’s guidelines. Wrong pressure levels can cause irreparable damage to the boiler. The health of the Pressure Release Valve (PRV) is the key to sustain best boiler performance. There is no better doctor to find its health than the boiler installation engineer.

4. Dripping water from under the boiler surface

Is there water dripping from the pipes and from under the boiler? That is very much the issue of faulty boiler installation. In order to avoid this particular condition, ask the boiler installation engineer to do the ductwork installation using high-quality tapes and connectors. The cracks and leak points could be due to high pressure and very hot water and gas flowing inside the pipes. If the ductwork installation hasn’t been done for the last 5 years, opt for total replacement instead of taping.

5. Boiler flue gas safety

This is different from point number 1.

At no point of installation should the safety regulations be overlooked. Boilers require significant amount of space around them so that there is enough ‘breathing’ area. Flue line should be easily accessible in order to check leakage of poisonous gas—carbon monoxide. In most cases, the boiler installation servicer would fit in an access panel as per safety regulations.

Contact Us

ACFurnaceGTA Corporation

Contact Person - Evgeniy Fateev

Address - Unit 3A, 112 Snidercroft Rd, Vaughan,Ontario, Canada, L4K 2K1

Contact No. - 1(416) 554-9595

Email - info@acfurnacegta.ca

Website - http://www.acfurnacegta.ca/