boots[1]
TRANSCRIPT
8/11/2019 Boots[1]
http://slidepdf.com/reader/full/boots1 1/1
Materials:
260s yellow- 1 pc
260s red – 1 pc
260s Caribbean – 3 pcs
260s beige – 2 pcs
5” white – 2pcs
BootsBy Balloon Artist: Mooi Yan
Copyright © 2013. All rights reserved. No part of this publication may be reproduced in
any form or by any means including electronic, photocopying, recording, or otherwise,
without the prior consent from Balloon Baron Specialties.
Boots/1
Inflate 260s beige and leave about 10
cm at the back. Twist a 3cm bubble and
change it into a pinch. Twist a 14cm
bubble followed by a 3cm bubble.
Change the 3cm bubble into a pinch.
1 2
Twist a 14cm bubble and
weave around the first 3cm
pinch in step 1 as shown.
3
Twist a 14cm bubble and weave
around the 2nd 3cm pinch in step
1. Twist another 14cm bubble and
weave around the 1st 3cm pinch in
step 1.
Twist a 6cm loop. Twist a 6cm
bubble as shown.
4
Twist a 6cm loop.
5
Twist two 4cm loop as shown.
6
Twist a 6cm bubble and weave
around the 1st 3com pinch in step 1.
Twist a 6cm loop as shown.
7
Twist a 14cm bubble and weave around
the 2nd 3cm pinch and followed by a 14cm
and weave around the 1st 3cm pinch in
step 1 as shown. This is the head.
8
Inflate 260s Caribbean and
leave about 10 cm at the back.
Twist two 3cm bubbles and
turn them into pinch.
9
Twist a 14cm bubble followed by a
3cm bubble. Turn the 3cm bubble
into a pinch.
10
Twist a 14 cm bubble and weave
around the double pinch. Inflate
260s yellow to about 50cm. Tie
to the double pinch as shown.
11
Twist a 17cm bubble and weave
around the 2nd 3cm pinch in step 1 as
shown. This is the face.
12 13 14 15
16 17 18 19
Twist a 15cm bubble and weave
around the 3cm pinch in step 12.
Twist a 15cm bubble and weave
around the double pinch as shown.
Using Caribbean, twist a 17cm bubble
and weave around the 3cm pinch in
step 12. Twist another 17cm bubble
and weave around the double pinch.
Inflate 260s Caribbean and leave about 10cm at the
back. Twist a 10cm bubble followed by a 3cm bubble.
Turn the 3cm bubble into a pinch. Twist a 12cm bubble
and attached to the double pinch in step 15.
Twist a 12cm bubble followed by a
3cm bubble. Turn the 3cm bubble
into a pinch. Measure 10cm, cut
and tie the balloon.
Inflate a 18cm Caribbean. Twist a 2cm bubble and turn it into a pinch. Twist a 5cm bubble and weave around the 3cm pinch in s tep 12 as
shown. Inflate 260s red to about 50cm. Twist a 5cm bubble followed by a 6cm loop. Twist a 3cm bubble and turn it into a pinch . Twist a
3cm bubble followed by another 3cm bubble. Turn the 3cm bubble into a pinch. Twist a 6cm loop followed by a 5cm bubble. Cut and tie
the 260s red. Twist a 2cm bubble on the Caribbean and turn it into a pinch. Tie the 260s red to the 2cm pinch as s hown.
Inflate 260s Caribbean and
leave about 10cm at the back.
Tie to the 2nd 3cm pinch in
step 1 as shown.
20
23 24 25
26
27
28 29
Tail: Inflate 260s Caribbean
to about 22cm. Tie to the
3cm pinch in step 12.
Inflate 260s beige to about 20cm.
Twist a 3cm bubble and turn the
bubble into a pinch.
Twist a 3cm loop and tie to
the 260s Caribbean in step
18 as shown. Do two sets.
Inflate two 5” white to about
5cm in diameter. Tie them
together as shown.
Pull the 5” white nozzle through
the face and tie to the double
pinch Caribbean as shown.
Inflate 260s red to about 4cm. Attach as mouth as shown. Draw the
eyes and nose and you have sculptured a Boots!
21
22