botswana bureau of standards - bobs 2011-2012.pdfbotswana bureau of standards head office: ... sans...

15
BOBS Standards Work Programme Bulletin, Issue No.9 Page 0 Botswana Bureau of Standards Head Office: Main Airport Road Plot No. 55745 Block 8, Gaborone Private Bag BO 48 Tel: +267 3903200 Fax: +267 3903120 Email: [email protected] Website: www.bobstandards.bw Francistown Branch: Insurance House Plot Nos. 13393/4/5 2 nd Floor Private Bag F465, Francistown Tel: +267 2416232 Fax: +267 2416251 BOBS Standards Work Programme 1 April 2011 31 March 2012 [Issue No.9] Gaborone, Botswana

Upload: letuyen

Post on 21-May-2018

217 views

Category:

Documents


1 download

TRANSCRIPT

BOBS Standards Work Programme Bulletin, Issue No.9 Page 0

Botswana Bureau of Standards

Head Office:

Main Airport Road

Plot No. 55745

Block 8, Gaborone

Private Bag BO 48

Tel: +267 3903200

Fax: +267 3903120

Email: [email protected]

Website: www.bobstandards.bw

Francistown Branch:

Insurance House

Plot Nos. 13393/4/5

2nd Floor

Private Bag F465, Francistown

Tel: +267 2416232

Fax: +267 2416251

BOBS Standards Work Programme

1 April 2011 – 31 March 2012

[Issue No.9]

Gaborone, Botswana

BOBS Standards Work Programme Bulletin, Issue No.9 Page 1

Contents

International Classification for Standards (ICS)............ 2

List of technical Committees....................................... 2

Draft Botswana Standards.......................................... 3

Table 1 Project stages................................................ 10

BOBS Standards Work Programme Bulletin, Issue No.9 Page 2

International Classification for Standards (ICS)

Main ICS Subject Fields

01 Generalities. Terminology. Standardiation. Documentatiom

03 Sociology. Services. Company Organization and Management. Administration. Transport

07 Mathematics. Natural Sciences

11 Health Care Technology

13 Environment and Health Protection. Safety

17 Metrology and Measurement. Physical Phenomena

19 Testing

21 Mechanical Systems and Components for General Use

23 Fluid Systems and Components for General Use

25 Manufacturing Engineering

27 Energy and Heat Transfer Engineering

29 Electrical Engineering

31 Electronics

33 Telecommunications

35 Information Technology. Office Equipment

37 Image Technology

39 Precision Mechanics. Jewellery

43 Road Vehicle Engineering

45 Railway Engineering

47 Ship Building and Marine Structures

49 Aircraft and Space. Vehicle Engineering

53 Materials Handling Equipment

55 Packaging and Distribution of Goods

59 Textile and Leather Technology

61 Clothing Industry

65 Agriculture

67 Food Technology

71 Chemical Technology

73 Mining and Minerals

75 Petroleum and Related Technologies

77 Metallurgy

79 Wood Technology

81 Glass and Ceramics Industries

83 Rubber and Plastics Industries

85 Paper Technology

87 Paint and Colour Industries

91 Construction Materials and Building

93 Civil Engineering

95 Military Engineering

97 Domestic and commercial equipment. Entertainment. Sports

BOBS Standards Work Programme Bulletin, Issue No.9 Page 3

List of Technical Committees (TC’s) Fruits and Vegetables AFD1

Animal Feeding Stuffs AFD2

Cereals and Pulses AFD3

Milk and Milk Products AFD4

Bakery Products AFD5

Fruit Juices AFD6

Meat, poultry, fish, eggs and their products AFD7

Beekeeping & bee products AFD8

Cement lime & masonry units BCD1

Tiles BCD2

Roads BCD3

Concrete Pipes and Culverts BCD4

Plastics, Pipes and Accessories BCD5

Timber & Timber Products BCD7

Furniture BCD8

Paints and vanishes CD1

Stationery CD2

Industrial and Laboratory Chemicals CD3

Occupational Health and Safety CD4

Hygiene, maintenance & cleaning chemicals CD5

Plastic Products CD6

Solar Photovoltaic Energy Systems EED1

Electrical Installations & Accessories EED2

Telecommunications EED3

Solar Thermal EED4

Safety & performance of household & similar

Electrical appliances EED5

Galvanic cells & batteries EED6

Environmental Management Systems EMD1

Water quality EMD2

Quality management GPD1

Hotels and related establishments GPD2

Casino & related equipment GPD3

Metal castings MED1

Liquefied petroleum gas MED2

Solid fuel fired equipment MED3

Door and window frames MED4

Motor Vehicles MED5

Fire Safety MED6

Agricultural machinery & farm implements MED7

Welding and allied products MED8

Building Environment Design MED9

Clothing and Textiles TCD1

Leather and leather products TCD2

BOBS Standards Work Programme Bulletin, Issue No.9 Page 4

Table 1

1 2 3 4 5 6 7 8

Serial No. Project No. Project Title

Reference standard ICS Number Project stage as

at start of year

Project stage at end of

year

Project stage as

at December

2011

1 EED3 BOS 67:2011 - Administration standard for commercial telecommunications

infrastructure (REVIEW)

BOS 67:2003 33.02 90.00 90.93 90.93

2 EED3 BOS 70:2011 - Earthing and bonding of commercial telecommunications

infrastructure (REVIEW)

BOS 70:2004 33.02 90.00 90.93 90.93

3 EED5 Household and similar electrical appliances –Safety- Particular requirements

for electric fence energizers

IEC 60335-2-76 65.040.99 20.00 50.99 40.99

4 EED5 Household and similar electrical appliances –Safety- Particular requirements

for ironers

IEC 60335-2-44 97.06 20.00 50.99 40.99

5 EED1 Secondary cells and batteries for PV systems - Requirements and test methods

(REVIEW)

BOS IEC 61427 27.160; 29.220.20 90.00 90.93 90.20

6 EED1 Battery charge controllers for photovoltaic systems – Performance and

functioning

IEC 62509 27.16 20.00 50.99 40.20

7 EED1 Solar photovoltaic energy systems – Part 1: Design and installation BOS 2-1:2001 27.16 30.20 50.99 40.99

8 EED5 Hand-held motor-operated electric tools – Part 1: General requirements SANS 60745-1:2010 25.140.20 20.00 50.99 40.93

9 EED5 Hand-held motor-operated electric tools – Particular requirements for grinders,

polishers and disk-type sanders

SANS 60745-2-3:2007 25.140.20 20.00 50.99 40.93

10 EED5 Hand-held motor-operated electric tools – Particular requirements for polishers

and sanders other than disk-type

SANS 60745-2-4:2010 25.140.20 20.00 50.99 40.93

11 EED5 Hand-held motor-operated electric tools – Particular requirements for circular

saw

SANS 60745-2-5:2010 25.140.20 20.00 50.99 40.93

12 EED5 Hand-held motor-operated electric tools – Particular requirements for hammers SANS 60745-2-6:2008 25.140.20 20.00 50.99 40.20

BOBS Standards Work Programme Bulletin, Issue No.9 Page 5

13 EED5 Hand-held motor-operated electric tools – Particular requirements for concrete

vibrators

SANS 60745-2-12:2009 25.140.20 20.00 50.99 40.20

14 EED5 Hand-held motor-operated electric tools – Particular requirements for chain saw SANS 60745-2-13:2010 25.140.20 20.00 50.99 40.20

15 EED5 Hand-held motor-operated electric tools – Particular requirements for planers SANS 60745-2-14:2010 25.140.20 20.00 50.99 40.20

16 EED5 Household and similar electrical appliances –Safety-Part 1: General

requirements

IEC 60335-1 97.19 90.00 90.93 90.60

17 EED2

Plug and Socket-outlet systems for household and similar purposes for use in

Botswana Part 0: General and safety requirements SANS 164-0:2007 29.120.30 40.60 50.99

50.00

18 EED2

Plug and Socket-outlet systems for household and similar purposes for use in

Botswana Part 1: Conventional system, 16 A 250 V a.c. SANS 164-1:2007 29.120.30 40.60 50.99

50.00

19 EED2

Plug and Socket-outlet systems for household and similar purposes for use in

Botswana Part 2: IEC system, 16 A 250 V a.c. SANS 164-2:2006 29.120.30 40.20 50.99

50.00

20

EED2 Plug and Socket-outlet systems for household and similar purposes for use in

Botswana Part 4: Dedicated system 16 A 250 V a.c.

SANS 164-4:2007 29.120.30 40.20 50.99

50.00

21 EED2

Conductors for overhead electrical transmission lines Part 1: Copper wires and

stranded copper conductors SANS 182-1:2008 29.240.20 20.00 50.99

40.20

22 EED2

Conductors for overhead electrical transmission lines Part 2: Stranded

aluminium conductors SANS 182-2:2008 29.240.20 20.00 55.00

40.20

23 EED2

Conductors for overhead electrical transmission lines Part 3: Aluminium

conductors, steel reinforced SANS 182-3:2003 29.240.20 20.00 55.00

40.20

24 EED2

Test methods for bare conductors and conductors of insulated electric cables

Part 1: Conductors Resistance SANS 6282-1:2007 29.060.20 20.00 45.00

40.20

25 EED2

Test methods for bare conductors and conductors of insulated electric cables

Part 2: Quality of metallic coatings SANS 6282-2:2007 29.060.20 20.00 40.93

40.20

26 EED2

Test methods for bare conductors and conductors of insulated electric cables

Part 3: Mechanical tests SANS 6282-3:2007 29.060.20 20.00 40.60

40.20

27 EED2 Test methods for armouring of insulated electric cables SANS 6283:2007 29.060.20 20.00 45.00 40.20

28

EED2

IEC 60502-4

Replaced by IEC 60076-1 (Stage 30.20)

IEC 60502-4:2010 29.060.20 20.00 45.00

Cancelled

29

EED2

IEC 60227-6

Replaced by IEC 60076-2 (Stage 30.20)

IEC 60227-6:2001 29.060.20 20.00 45.00

Cancelled

30 EED2 (550-1) Materials of insulated electric cables and flexible cord Part 1: Conductors

SANS 1411-1 29.050 0.00 40.00 30.00

BOBS Standards Work Programme Bulletin, Issue No.9 Page 6

31 EED2 (550-2) Materials of insulated electric cables and flexible cord Part 2: Polyvinyl (PVC)

SANS 1411-2 29.050 0.00 40.00 30.00

32 WDS 514 Cultured marble sanitaryware ASTM C503 91.100.15 0.00 40.99 50.00

33 PDS 480 Mixtures of copper-chromium-arsenic compounds for timber preservation SANS 673 71.100.50 40.20 50.99 50.99

34 PDS 481 Measurement of moisture content, preservation penetration and sapwood depth

of timber

SANS 5984 91.140.60 10.00 50.99 50.99

35 BOS 175 The manufacture of finger-jointed structural timber (Revision) SANS 10096 79.04 90.20 90.93 90.93

36 PDS 440 Workmanship on building sites - COP for wall and floor tiling BS 8000 91.100.23 40.20 50.99 50.99

37 PDS 478 Roof and side cladding cladding replaced by "Workmanship on building sites

– COP for slating and tiling of roofs and cladding"

SANS 10237

BS 800-6

91.060.10 0.00

0.00

40.99

40.99

Cancelled

50.99

38 BOS 91 Modified poly (vinyl chloride) (PVC-M) pressure pipe and coupling for cold

water services in underground mining (Revision)

SANS 1283 23.040.20 90.20 90.93 90.92

39 PDS 477 Grease traps in domestic, commercial and industrial waste drainage

applications

ASTM A112.14.3 21.26 40.60 50.99 50.00

40 BOS 140 Sealing compounds for building industry, one-component silicone rubber base SANS 1305 91.100.50 40.60 50.99 50.00

41 BOS 139 The manufacture and erection of timber trusses (Revision) SANS 10243 91.060.20 90.20 90.93 90.92

42 WDS 440 Workmanship on building sites - COP for natural stone tiling BS 8000 91.060.10 40.20 50.99 50.99

43 BOS 138 Wooden doors (revision) SANS 545 79.08 90.20 90.93 90.93

44 PDS 493 Sealing compounds for building industry, two-component polyurethane base SANS 1077 91.100.50 20.00 50.99 50.00

45 WDS 482 Bituminous damp-proof course BS 6398 91.120.30 20.00 50.99 50.00

46 BOS 221 The installation of textile floor coverings (Revision) SANS 10186 59.080.60 90.2 90.93 90.92

47 WDS 529 Kgalagadi Sand building blocks No base standard 23.040.20 10.00 40.99 40.20

48 ISO 15439 Plastics piping systems for the supply of gaseous fuels for max operating

pressure up to 0.4 MPa (4 bar) ISO 15439 91.140.60 10.00 40.99

40.20

49 BOS 136-1 Water supply and drainage for buildings - Part 1: Water supply installations

(Revision)

SANS 10252-1 91.140.60 90.2 90.93 90.92

50 ISO 1452 Plastics piping systems for water supply and for drainage and sewerage under

pressure

ISO 1452 91.140.60 0.00 50.99 50.99

BOBS Standards Work Programme Bulletin, Issue No.9 Page 7

51 FDS 515 Pine poles, cross-arms and spacers for power distribution, telephone systems

and street lighting

SANS 753 29.240.20 0.00 50.99 30.99

52 BOS 439-1 Wooden ladders – Part 1: General requirements and methods of test

SANS 550-1 97.145 0.00 50.99 50.99

53 BOS 439-2 Wooden ladders – Part 2: Single and extension ladders

SANS 550-2 97.145 0.00 50.99 50.99

54 BOS 439-3 Wooden ladders – Part 3: Trestle and extension trestle ladders

SANS 550-3 97.145 0.00 50.99 50.99

55 BOS 439-4 Wooden ladders – Part 4: Gstep ladders, platform ladders and shelf ladders

SANS 55-4 97.145 0.00 50.99 50.99

56 BOS 95-1 Sawn softwood timber – Part 1: General requirements (Revision)

SANS 1783-1 91.080.20 0.00 90.93 90.93

57 BOS 95-2 Sawn softwood timber – Part 2: Stress-graded structural timber and timber for

frame wall construction (Revision)

SANS 1783-2 91.080.20 0.00 90.93 90.93

58 BOS 95-3 Sawn softwood timber – Part 3: Industrial timber (Revision)

SANS 1783-3 91.080.20 0.00 90.93 90.93

59 BOS 95-4 Sawn softwood timber – Part 4: Brandering and battens (Revision)

SANS 1783-4 91.080.20 0.00 90.93 90.93

60 BOS 173 Eucalyptuc cross-arms and spacers for power distribution and communications

systems (Revision)

SANS 754 29.240.20 0.00 90.93 90.92

61 BOS 380 Construction of vacuum sewerage systems

ATV-DVWK-A 116-1 79.020 0.00 50.99 50.99

62 BOS 101 Review Precast concrete suspended slabs - Specification BOS 101:2005 91.100.30 90.60 90.93 90.92

63 BOS 102 Review Installation of concrete paving blocks – Code of practice BOS 102:2005 91.100.30 90.60 90.93 90.92

64 BOS 103 Review Precast concrete kerbs, edgings and channels - Specification BOS 103:2005 91.100.30 90.60 90.93 90.92

65 BOS 104 Review Prefabricated concrete components for fences - Specification BOS 104:2005 91.100.30 90.60 90.93 90.60

66 BOS 135 Review Ready-mixed concrete Specification BOS 135:2005 91.100.30 90.00 90.93 90.00

67 ISO 1920-8 Testing of concrete - Part 8:Determination of drying shrinkage of concrete for

samples prepared in the field or in the laboratory

ISO 1920-8:2009 91.100.30 10.00 50.99

40.20

68 ISO 1920-9 Testing of concrete - Part 9:Determination of creep of concrete cylinders in

compression ISO 1920-9:2009 91.100.30 10.00 50.99

40.20

69 ISO 12439:2010 Mixing water for concrete ISO 12439:2010 91.100.30 50.60 50.99 50.99

70 BOS 9 Review Labelling of pre-packaged goods (Specification) BOS 9:2000 55.020 90.20 90.92 90.20

71 WDS 528 Concrete poles for telephone, power and lighting purposes SANS 470:2003 91.100.30 00.20 50.99 40.20

72 ISO 21067:2007(E) Packaging ― Vocabulary ISO 21067:2007(E) 01.040.55; 55.020 40.60 50.99 50.99

73 ISO 780:1997 Packaging ― Pictorial marking for handling of goods ISO 780:1997 01.080.20;55.020 40.60 50.99 50.99

BOBS Standards Work Programme Bulletin, Issue No.9 Page 8

74 ISO 11897:1999 Packaging ― Sacks made from thermoplastic flexible film - Tear propagation

on edge folds ISO 11897:1999 55.080 40.20 50.99

50.99

75 ISO 22742:2005

Packaging ― Linear bar code and two-dimensional symbols for product

packaging ISO 22742:2005

01.080.99;55.020 40.20 50.99

50.99

76 ISO 28219:2009

Packaging ― Labelling and direct product marking with linear bar code and

two-dimensional symbols ISO 28219:2009

35.040; 55.020 30.00 50.99

30.92

77 SADCSTAN

TC1/SC5-001 Rammed Earth Structures

SAZS 724:2001 91.080.99 20.99 50.99

40.93

78 MED 1 Water supply and distribution system components-Demand type water taps SANS 1808-66:2005 23.040.70 0.00 50.99 50.00

79 MED 2 Cylinder shut off valves for LPG-Specification SANS 199:2009 23.060.40 0.00 50.99 50.00

80 MED 2

The handling and storage of LPG in domestic and industrial installations:

Installation in mobile units and small non-permanent buildings

SANS 10087-2:2005 13.30 0.00 50.99 50.00

81

MED 2 Specification for flexible rubber tubing, rubber hose and rubber hose

assemblies for use in LPG vapour phase and LPG air installations

SANS 1156-2:2010 23.040.70 0.00 50.99

50.00

82 MED 6 Reconditioning of fire fighting equipment: Fire hose reels-Specification SANS 10105-2:2010 13.220.10 0.00 50.99 50.00

83

MED 6 Fire extinguishing media, foam concentrates Part 1: for top application to water

immiscible liquids

ISO 7203-1:2011 13.220.10 0.00 50.99

40.93

84

MED 6

Fire extinguishing media, foam concentrates Part 2: Specification for medium

to high expansion foam concentrates for top application to water-immiscible

liquids

ISO 7203-2:2011 13.220.10 0.00 50.99

40.93

85

MED 6 Fire extinguishing media, foam concentrates Part 3: Specification for low

expansion foam concentrates for top application to water-miscible liquids

ISO 7203-3:1999 13.220.10 0.00 50.99

40.93

86 MED 9

Application of energy requirements for buildings with artificial ventilation or

air-conditioning SANS 204-3:2008 91.140.01 0.00 50.99

40.60

87 BCD6 Civil engineering construction-Part 20: Structural steelworks. SANS 1200H 91.080.10 30.00 50.60 50.00

88 BCD6

Civil engineering construction-Part 21: Structural steelworks (Sundry items) SANS 1200HA 91.080.10 30.00 50.60

50.00

89 BCD6 Light steel frame building SANS 517 91.080.10 30.00 50.60 30.20

BOBS Standards Work Programme Bulletin, Issue No.9 Page 9

90 BCD6

Standardized specification for civil engineering construction-Part 23: Corrosion

protection of structural steelworks. SANS 1200HC 25.220.01 30.00 50.99

50.00

91 GPD1 Guidelines on auditing management systems (ISO 19011) ISO 19011 03.120.10; 13.020.10 10.00 40.20 40.20

92 GPD1 Quality Management – Guidelines for training ISO 10015 03.100.30; 03.120.10 90.00 90.93 Shelved

93 BCD6 Basis of structural design and actions for buildings and industrial structures:

Part 1: Basis of structural design SANS 10160-1 91.010.30 10.00 45.60

40.20

94 BCD6

Basis of structural design and actions for buildings and industrial structures:

Part 2: Self-weight and imposed loads SANS 10160-2 91.010.30 10.00 45.60

40.20

95

BCD6

Basis of structural design and actions for buildings and industrial structures:

Part 3: Wind actions

SANS 10160-3

91.010.30

10.00 45.60

40.20

96

BCD6

Basis of structural design and actions for buildings and industrial structures:

Part 5: Basis for geotechnical design and actions

SANS 10160-5

91.010.30

10.00 45.60

40.20

97

BCD6

Basis of structural design and actions for buildings and industrial structures:

Part 6: Actions imposed by cranes and machinery

SANS 10160-6

91.010.30

10.00 45.60

40.20

98

BCD6

Basis of structural design and actions for buildings and industrial structures:

Part 8: Actions during execution

SANS 10160-8

91.010.30

10.00 45.60

40.20

99 GPD2 Standard on mobile safaris BTO literature none 10.00 45.00 Shelved

100 GPD2 Standard on camping sites BTO literature none 10.00 45.00 Shelved

101 517

Transportation of dangerous goods – Operational requirements for road

vehicles

SANS 10231 13.300 20.00 50.99 40.20

102 518 Transportation of dangerous goods – Emergency information systems –

Emergency information system for road transportation

SANS 10231-1 13.300 20.00 50.99 40.20

BOBS Standards Work Programme Bulletin, Issue No.9 Page 10

103 519-1 Transportation of dangerous goods – Packaging and large packaging for road

and rail transport Part 1: Packaging

SANS 10229-1 3.220 20.00 50.99 40.20

104 519-2 Transportation of dangerous goods – Packaging and large packaging for road

and rail transport Part 2: Large packaging

SANS 10229-2 3.220 20.00 50.99 40.20

105 161-1 Safety and security glazing materials for buildings – Safety performance of

glazing materials under human impact

BOS 161-1 81.040.20 90.20 90.93 90.60

106 161-2 Safety and security glazing materials for buildings – Burglar-resistant and

vandal-resistant glazing materials

BOS 161-2 81.040.20 90.20 90.93 90.60

107 161-3 Safety and security glazing materials for buildings – Bullet-resistant glazing

materials

BOS 161-3 81.040.20 90.20 90.93 90.60

108 BOS 187 Motor vehicle safety: Rear underrun protection devices BOS 187 43.040.60 90.20 90.93 90.60

109

BOS ISO 5682-1

Equipment for crop protection – Spraying equipment- Test methods for sprayer

nozzles BOS ISO 5682-1

65.060.40 90.20 90.93 90.60

110

BOS ISO 5682-2

Equipment for crop protection – Spraying equipment- Test methods for

hydraulic sprayers BOS ISO 5682-2

65.060.40 90.20 90.93 90.60

111 BOS ISO 5682-3

Equipment for crop protection – Spraying equipment- Test method for volume

hectare adjustment systems of agricultural hydraulic pressure sprayers BOS ISO 5682-3

65.060.40 90.20 90.93 90.60

112 518-3

Transportation of dangerous goods – Emergency information systems –

Emergency response guides

SANS 10231-3

13.300 20.00 50.99 50.00

113 540 The identification and classification of dangerous goods for transport.

SANS 10228 13.300 20.00 50.99 50.00

114 541

Transport of dangerous goods – Intermediate bulk containers for road and rail

transport

SANS 10233

13.300 20.00 50.99 50.00

115 543

Transport of dangerous goods – Design, construction, testing, approval and

maintenance of road vehicles and portable tanks

SANS 1518

13.300 20.00 50.99 50.00

116 215

Locks, latches, and associated furniture for wooden and pressed metal doors

(Domestic type)

BOS 215

81.040.20 90.20 90.93 90.60

117 216 Wheel flaps fitted to motor vehicles

BOS 216 43.040.60 90.20 90.93 90.60

118 ISO 5681 Equipment for crop protection - Vocabulary

ISO 5681 65.060.40; 01.040.65 90.20 90.93 90.60

119 ISO 8026

Agricultural irrigation equipment – Sprayers – General requirements and test

methods

ISO 8026

65.060.35 90.20 90.93 90.60

120 AFD2 Goats/sheep feeds NRC 65.12 20.00 50.99 20.00

121

AFD3 Peanut butter CODEX 67.06 40.99 50.99 50.99

BOBS Standards Work Programme Bulletin, Issue No.9 Page 11

122

AFD7 Canned fish, canned marine molluscs and canned crustaceans and their derived

products

SABS 67.120.30 40.99 50.99 50.99

123

AFD4 Dried whole milk, skimmed milk and cream powders COMESA/EAST AFRICA 67.100.10 30.00 50.99 50.99

124 AFD2 Ostrich feeds BOS 8-2 65.12 20.00 50.99 30.00

125 AFD7 The manufacture, production, processing and treatment of canned meat

products– Specification

SABS 67.120.30 40.99 40.99 40.99

126 EMD2 Revision of BOS 93 - Waste water ISO 5667-7:1993 13.060.25 and 13.060.45 90.00 45.00 40.60

127 EMD2 BOS ISO 5667-11:1993 Guidance on sampling of groundwaters - revision ISO 5667 - 11:2009 13.060.10 and 13.060.45 20.00 45.93 50.99

128 EMD2 BOS ISO 5667-13:1997 Guidance on sampling of sludges from sewage and

water-treatment works

ISO 5667 - 13:1997 13.060.30 and 13.060.45 20.00 45.93 40.60

129

EMD1 BOS ISO 14005:2010 Environmental management - Guidance on the phasE

implementation of an environmental management system, including the use of

the environmental performance evaluation

ISO 14005:2010 13.020.10 20.20 55.00 50.99

130 EMD1 BOS ISO 14063:2006 Environmental management - Environmental

communication - Guidelines and examples

ISO 14063:2006 13.080.05 20.00 55.00 50.99

131 EMD1 BOS ISO 10381-2:2002 Soilquality - Guidance on sampling ISO 10381-2:2006 13.020.40 20.00 40.60 20.00

132 WDS 498 Filled bar soap SANS 236:2008 71.100.40 20.20 50.99 45.99

133 WDS 499 General purpose pure soap SANS 235:2008 71.100.40 20.00 55.00 45.99

134 WDS 500 Toilet soap SANS 237:2008 71.100.40 20.00 40.60 45.99

135 AFD Butternut specification and grading requirements none 67.080.20 20.60 50.99 40.20

136 AFD Beetroot specification and grading requirements none 67.080.20 20.00 40.92 40.20

137 AFD Specification for wheat / bread flour CODEX 152 67.2 20.60 50.99 40.20

138 AFD Specification for fresh Edible oils SANS 1875 20.60 50.99 40.20

139 AFD BOS 106 Review BOS 106 67.220.20 20.00 50.00 20.00

140 AFD Classification for juices none 67.220.20 20.00 40.92 20.00

141 AFD Ginger drink specification none 67.220.20 20.00 20.60 30.20

142 TCD1 (503) Mosquito netting CKS 562 59.080.30 20.00 50.99 40.99

143 TCD1 (504) Elasticated Disposable Diapers CKS 648 59.080.30 20.00 50.99 30.99

BOBS Standards Work Programme Bulletin, Issue No.9 Page 12

144 TCD1 (505-1) Performance requirements for textiles fabrics of low flammability Part 1:

Apparel Fabrics

SANS 1423-1:2008 59.080.30 20.00 50.99 40.99

145 TCD1 (505-2) Performance requirements for textiles fabrics of low flammability Part 2:

Curtains and drapes fabrics

SANS 1423-2:2009 59.080.30 20.00 50.99 40.99

146 TCD1 (505-3) Performance requirements for textiles fabrics of low flammability Part 3:

Upholstery fabrics

SANS 1423-3:2004 59.080.30 20.00 50.99 40.99

147 TCD1 (505-4) Performance requirements for textiles fabrics of low flammability Part 4:

Bedding fabrics, bedcovers and pillows

SANS 1423-4 2004 59.080.30 20.00 50.99 40.99

148 TCD1 (505-5) Performance requirements for textiles fabrics of low flammability Part 5:

Fabrics for use in movable office partitions

SANS 1423-5 2008 59.080.30 20.00 50.99 40.99

149 TCD1 (506-1) Woven cotton and similar apparel fabrics Part 1: Basic requirements SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

150 TCD1 (506-2) Woven cotton and similar apparel fabrics Part 2: Polyester-and-cotton

workwear fabrics

SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

151 TCD1 (506-3) Woven cotton and similar apparel fabrics Part 3: Polyester-and-viscose

workwear fabrics

SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

152 TCD1 (506-4) Woven cotton and similar apparel fabrics Part 4: cotton jean and drill fabrics SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

153 TCD1 (506-5) Woven cotton and similar apparel fabrics Part 5: Cotton flannelette fabrics SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

154 TCD1 (506-6) Woven cotton and similar apparel fabrics Part 6: Denim fabrics SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

155 TCD1 (506-7) Woven cotton and similar apparel fabrics Part 7: Jacket linings SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

156 TCD1 (506-8) Woven cotton and similar apparel fabrics Part 8: cotton dress fabrics SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

157 TCD1 (506-9) Woven cotton and similar apparel fabrics Part 9: Polyester-and-cotton shirt

fabrics

SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

158 TCD1 (506-10) Woven cotton and similar apparel fabrics Part 10: Pocketing SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

159 TCD1 (506-11) Woven cotton and similar apparel fabrics Part 11: Polyester-and-cellulosic

raincoat fabrics

SANS 1387-1 2003 59.080.30 20.00 50.99 40.20

160 TCD2 (507) Leather school bags and school brief cases SANS 1147 2001 59.140.30 20.00 50.99 40.99

161 TCD2 (508) Chrome-tanned bend outer sole leather SANS 1869 2001 59.140.35 20.00 50.99 40.99

162 TCD2 (509) Vegetable-tanned bend outer sole leather SANS 1873 2001 59.140.35 20.00 50.99 40.99

163 TCD2 (510) Fabric linings for footwear SANS 385 2006 61.06 20.00 50.99 40.99

164 TCD2 (511) Footwear laces SANS 770 2009 61.06 20.00 50.99 40.99

165 TCD2 (512) Leather sandals IS 6493 1971 61.06 20.00 50.99 20.00

166 CD6 Safety of toys - Part 1: Safety aspects relate to mechanical and physical ISO 8124-1 97.200.50 40.20 50.99 40.93

BOBS Standards Work Programme Bulletin, Issue No.9 Page 13

properties

167 CD6 Safety of toys - Part 2: Flammability ISO 8124-2 97.200.50 40.20 50.99 50.99

168 CD6 Safety of toys - Part 3: Migration of certain elements ISO 8124-3 97.200.50 40.20 50.99 50.99

169 CD1 WDS 453 - National colour standard SANS 1091 17.180.20 40.20 50.99 45.00

170 CD1 BOS 11: Paints and varnishes - undercoats for paints BOS 11 87.04 40.00 50.99 45.00

171 CD1 BOS 47: Paints and varnishes - roof paints BOS 47 87.04 30.20 50.99 40.00

172 CD1 WDS 520 - Emulsion roof paint SANS 940 87.04 20.00 50.99 45.92

173 CD1 WDS 521 - Ceramic roof coating material ASTM C236 87.04 20.00 50.99 30.20

174 CD1 WDS 522 - Code of Practice for paint application SANS 10305-2 87.04 20.00 45.98 30.20

175 CD2 WDS 523 - Envelopes CKS 9 85.080.10 20.00 50.99 40.60

176 CD2 WDS 524 - Sizes of paper and envelopes SANS 822 85.080.10 20.00 50.99 40.00

177 CD2 WDS 525 - Paper bags CKS 67 55.08 20.00 45.20 30.20

178 CD4 WDS 526 - Personal eye protection SANS 1404/ EN 166 13.340.20 30.20 50.99 50.99

179 CD2 WDS 527 – Printing and business paper SANS 1281 85.080.10 20.00 40.93 30.99

180 CD4 WDS EN 165 – Personal eye protection - Vocabulary EN 165 13.340.20 20.00 50.99 50.00

181 CD4 WDS EN 169 – Personal eye protection – Filters for welding and related

techniques

EN 169 13.340.20 20.00 50.99 50.00

182 CD4 WDS EN 170 – Personal eye protection – Ultraviolet filters EN 170 13.340.20 20.00 50.99 50.00

183 CD4 WDS EN 171 – Personal eye protection – Infrared filters EN 171 13.340.20 20.00 50.99 50.00

184 CD4 WDS EN 175 – Personal eye protection – Equipment for eye and face

protection during welding and allied processes

EN 175 13.340.20 20.00 50.99 50.00

185 CD4 WDS EN 207 – Personal eye protection – filters and eye protectors against

laser radiation

EN 207 13.340.20 20.00 50.99 50.00

186 CD4 WDS EN 379 – Personal eye protection – Automatic welding filters EN 379 13.340.20 20.00 50.99 50.00

187 CD4 WDS BS 7028 – Eye protection for industrial and other uses – Guidance on

selection, use and maintenance

BS 7028 13.340.20 20.00 50.99 50.00

188 CD4 WDS EN 167 – Personal eye protection – Optical test methods EN 167 13.340.20 20.00 50.99 40.60

189 CD4 WDS EN 168 – Personal eye protection – Non-optical test methods EN 168 13.340.20 20.00 50.99 40.60

190 CD4 WDS EN 172 – Personal eye protection – Sunglare filters for industrial use EN 172 13.340.20 20.00 50.99 40.60

191 CD4 WDS EN 208 – Personal eye protection – Eye protectors for adjustment work

on lasers and laser systems (laser adjustment eye-protectors)

EN 208 13.340.20 20.00 50.99 40.60

BOBS Standards Work Programme Bulletin, Issue No.9 Page 14

192 CD4 WDS EN 471 – High visibility warning clothing for professional use – Test

methods and requirements

EN 471 13.340.20 20.00 50.99 40.60

193 CD4 WDS EN 1731 – Personal eye protection – Mesh eye and face protectors EN 1731 13.340.20 20.00 50.99 40.60