1

Paper that would otherwise land up at a recycling plant is rescued and repurposed.

2

3 4

Sprayed with an environmentally friendly nano liquid glass coating to make the paper water resistant.

Once the paper is fused it can be treated like any other fabric. We draw the pattern, cut it and stitch the bag or sleeve with great care.

Artwork size Limited to twenty pricks

Colour Single Large variety of colours available

Quantity 1-100

Price V V V Price calculated per needle prick

Process Post manufacture 2 - 20 working days

Notes Placement limited to front pocket only Plain stitch embroidery only Geometric designs only Distance between pricks should not be more than 5cm

Artwork size 8cm x 4.5cm max (regular stamp pad) 9cm max (circular black stamp pad)

Colour One colour Specific colours can be ordered*

Quantity No minimums

Price V Stamp manufacture and unit stamping cost

Process During manufacture 3 – 7 working days

Notes Will have a distressed look Fine print details are not always clear Magnets prevent stamping close to the edge of the flap Larger stamp pads and wider range of colours can be ordered but are subject to availability and additional lead times *Colours may not be an exact match

Artwork size 100cm x 150cm (maximum block size)

Colour No colour

Quantity 10+

Price V V Block price (calculated per square millimeter), set-up and unit debossing cost

Process Pre or post manufacture 3 – 10 working days

Notes No fine designs; bold designs add depth Maximum depth of block placement is 120cm from the edge Magnets prevent debossing close to the edge of the flap Possible bruising of paper on reverse side if debossed after manufacture

Artwork size No limitations

Colour Single to multiple pantone colours available

Quantity 25+

Price V V V Set-up and unit printing cost

Process Pre manufacture 3 – 15 working days

Notes Will have a distressed look High quality Fine detail

Artwork size 100cm x 150cm (maximum block size)

Colour One colour only Selection of metallic colours are available*

Quantity 10+

Price V V Block price (calculated per square millimeter), set-up and unit foiling cost

Process Pre or post manufacture 3 – 10 working days

Notes Bold designs add depth Maximum depth of placement is 120cm from the edge Magnets prevent foiling close to the edge of the flap Possible bruising of paper on reverse side if foiled after manufacture * If specific colours are required they can be ordered but are subject to availability and additional charges

Artwork size No limitations

Colour Full colour

Quantity 10+

Price V V V V V Unit printing cost

Process Pre manufacture 3 – 5 working days

Notes Will have a distressed look High quality Dark or intense prints are not advisable

Artwork size 9cm x 3.5cm (maximum size for tab) 5.5cm x 3cm (maximum design area for flat tab) 2cm x 3cm (maximum design area for folded-over tab)

Colour Leather available in various colours Rivets: antique brass / antique nickel

Quantity 10+

Price V V Set-up and unit lasering cost Cost of leather calculated separately

Process Post manufacture 5 – 10 working days

Notes Placement either flat on front pocket or flap (2 rivets) or fold-around on flap (1 rivet)

The Wren Design