breeze catalog brake 092409 - breeze automotive factory ... · 71008 - ezepak stop sn95-gt front™...

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, of 8

Brakes:

71008 - EzePak Stop SN95-GT Front™

This complete front brake kit works with 1994 and newer spindles.

$450.50

Includes twin piston PBR aluminum calipers with 11” rotors. (This is the stock front brake setup for 1999 and newer Mustangs.) Also includes caliper bolts, blue Loctite, DOT stainless steel brake hose and stainless steel hose bracket kits.

Note: SN-95 spindles require minor grinding of a casting boss for caliper clearance.

71039 - EzePak Stop SN95-Rear™ (10.5” Solid Rotor)

Rear disc brake kit for 8.8 solid axle rear. Includes new '94 - '04 Mustang loaded calipers, 10.5" rotors, caliper adapter brackets, mounting hardware, braided stainless brake hoses and brake hose bracket kit, brake line tee fitting, and parking brake cables with retaining clips. Requires 35168 Axle Set.

$644.25

71029 - EzePak Stop 4/5-lug Rear™

Just what you need to install rear disc brakes on your 8.8" solid axle rear with 4 or 5 lug Fox length axles in one easy to order package!

$678.25

Includes:Turbo-Coupe Rotors (10.125" dia ventilated) machined for 4 or 5 lug application, New Loaded Turbo-Coupe Calipers (44mm dia. piston)with integral parking brake, Parking Brake Cables with circlips, Steel caliper adapter brackets, Goodridge DOT Braided Stainless Steel Brake Hose Kit, Goodridge Banjo Bolt Kit, Stainless Steel Brake Hose Bracket Kit, Brake Line Tee with tube nuts, and Caliper Bracket to axle flange Fastener Kit.

Notes: Will fit inside 15" wheels. When using Bilstein coil-overs, calipers can be mounted on the front or rear side of the axle. When using Koni coil-overs, calipers must be mounted on the front side of the axle. Requires customer supplied hard brake line run from tee to brake hose bracket location. Please specify MkI/II or MkIII in special instructions at time of order so we can supply correct parking brake cables.

71013 EzePak Stop T-Bird IRS for Mustang Cobra Hubs™

Includes vented rotors, 5 lug 4.5” bolt circle, all new loaded calipers, caliper bolts, OEM Style steel/rubber hoses with tee and brackets and banjo bolts. Rotors are machined with a larger center hole to fit #30188 Mustang Cobra hubs.

$499.75



Brakes: (continued)

70550 Brake Hose Kit, Braided Stainless, 18 “ length with 5/8” round 3 AN male - 3/8”-24 IF bulkhead fitting, Goodridge. DOT approved. Made in USA

For use with all front and rear applications, except front pin-drive (see 70598 below). For bracket kit see 70085 below. For banjo bolt kit see 70576 or 21569 below.

$60.00

70598 Brake Hose Kit, Braided Stainless, 16 “ length with 5/8” round 3 AN male - 3/8”-24 IF bulkhead fitting, Goodridge. DOT approved. Made in USA

For front pin-drive application. For bracket kit see 70085 below. For banjo bolt kit see 70576 or 21569 below.

$60.00

70085 Brake Hose to Frame Bracket Kit for 5/8” OD Hose Ends, Stainless Steel

The 5/8” OD hole accepts most generic after-market stainless steel brake hose assemblies. Includes two brackets, retaining clips and stainless 3/16” rivets for mounting. Made in USA.

$21.00

70064 Brake Hose to Frame Bracket Kit, Stainless Steel, for OEM Style Anti-Rotation Hose Ends.

Includes brake line retaining clips, stainless 3/16” rivets for mounting, and 3/16” hard line tube nuts. Note: Fits 89 – 93 OEM equivalent replacement hoses only. Made in USA

$24.00

21554 Tube Nut, 3/16" OD Brake Line Inverted Flare ID to 7/16" male OD $2.50

70576 Banjo Bolt Kit, Goodridge M10-1.5 x 13/16”

Fits all Ford cast iron calipers with Breeze Goodridge brake lines.

$10.00

21570 Banjo Bolt Kit, M10-1.5 x 1” for ’87-’93 Mustang front and all T-bird rear calipers. (pair, with washers)

Use for hoses with OEM style block end at caliper $10.00



Brakes: (continued)

21569 Banjo Bolt Kit, M10-1.0 x 1” for Mustang Cobra/PBR front calipers (pair, with washers) $18.00

21551 Tube Nut, 3/16 Brake Line IF ID to 3/8-24 Male Thread, Brass $1.00

21553 Fitting, 3/16 Brake Line Tee, Brass $4.25

LM48548 Bearing Cone, Front Wheel Inner $9.00

LM12749 Bearing Cone, Front Wheel Outer $7.50

9150S Seal, Front Rotor Grease

$9.75

31053 Kit, Spindle Nut (retaining washer, nut, castellated lock, cotter pin)

$8.50

30127 Dust Cap, Front Wheel Bearing, ’87 – ’93, OEM Ford

$7.00

31019 Rotor, Front, ‘87-‘93 Fox Spindles, 5-lug $65.00

Note: Does not fit Mustang Bullitt wheels.



Brakes: (continued)

30138 Clip, Brake Hose Retainer, Steel $2.00

70086 Bolt Kit, Rear Caliper Brackets (backing plate) to Solid Axle, Grade 8 $13.00

70204 Rotor, Rear, Solid Axle, Turbo-Coupe, 10.125” Dia. x .950” thick, machined for 5 on 4.5" bolt circle $63.00

31111 Caliper Set, Thunderbird Turbo-Coupe, Rear, New, Loaded with Brackets and Banjo Bolts $228.00

31129 Rotor, Rear, Solid Axle, ’94-’04 Mustang, Solid, 5 Lug, 4.5” Bolt Circle $28.00

31130 Caliper Set, Rear, ’94-’04 Mustang, Loaded with Brackets and Banjo Bolts $246.00

70191 Rear Rotor, IRS, for use with new Mustang Cobra Hub, 10.125” Dia. by .715” thick for some 1992 and 1993 and up IRS donor calipers $73.00

31108 Caliper Set, Rear, IRS, New, ’93 – ’97, incl. bracket and pads $246.00

30020 Bolt, Flanged, Rear Caliper to Knuckle, (4 per IRS Car) Also SN95 front caliper to spindle. $2.50



Brakes: (continued)

30158 Parking Brake Handle, OEM Ford (Ford list $74.18)

$68.00

30157 Parking Brake Front Equalizer Cable, OEM Ford

$30.00

35070 Cable, Parking Brake, For Turbo Coupe Rear Disc, M2809A (includes #20310 E-Clip) $30.00

Uses rear FFR frame bracket

31144 Cable, Parking Brake, For 1994-2004 Mustang.

Use for rear disc applications in solid axle MKIII Roadster only. Uses front FFR frame bracket.

$30.00

20310 E-Clip, 10mm

Retains parking brake cable to caliper $1.50

31158 Master Cylinder, 1982 Mustang, .845” Bore

Remanufactured Aluminum with integral reservoir weighs in at 2.5lb. Requires 1 ea. 21552 and 21594 adaptors. $39.00

31051 Master Cylinder, 1984 Jeep Cherokee, 0.960” Bore (also known as 15/16”)

Recommended when using twin piston front calipers, cast iron with integral reservoir and weighs in at 7.5lb. Requires 1 ea. 21552 adaptor and 21555 adaptor.

$72.00



Brakes: (continued)

21552 Adaptor, 3/8–24 Female IF to ½ - 20 Male (for front port of ’84 Jeep Cherokee M-Cyl to rear brakes) $8.00

21555 Adaptor, 3/8-24 Female IF to 7/16-24 Male IF $6.00

21594 Fitting, Adaptor, 3/8-24 Female IF to 9/16-16 Male Thread IF $8.00

31100 Master Cylinder, 1994 Mustang Cobra, New, 0.960” Bore, (also known as 15/16”)

Recommended when using twin piston front calipers such as 1994 – 2004 Mustang or Mustang Cobra. Light weight aluminum with plastic reservoir weighs less than 2 lbs. Requires 1 ea. 21565 and 21566 adaptors. For kit, see 70581 below.

$119.00

70581 Master Cylinder Kit, 1994 Mustang Cobra, 15/16" Bore, with adapters and adjustable brake pushrod $168.00

21565 Adaptor, 3/8–24 Female IF to M10-1.0 Male bubble flare (for 1994 Mustang Cobra M-Cyl)

$6.00

21566 Adaptor, 3/8–24 Female IF to M12-1.0 Male bubble flare (for 1994 Mustang Cobra M-Cyl)

$9.00

70592 Pre-Formed Stainless Steel Brake Hard Line Kit

This 7 piece kit works with either the 31106 or the 31100 master cylinders, with recommended adaptor fittings, in solid axle Roadster applications. For manual brakes only. Does not fit with power booster. Tube nuts are stainless steel. Includes installation hardware. Requires 70064 or 70085 brake hose brackets. Made in USA.

$229.00



Brakes: (continued)

70631 Pre-Formed Stainless Steel Brake Hard Line Kit, 5-Piece for Mk3.1 Complete Roadster

We’ve removed the two lines that connect to the master cylinder in the #70592 7-piece kit above to create this 5 piece kit for solid axle Mk3.1 Roadsters. This leaves you with the job of fabricating just two hard lines from the Wilwood master cylinders to the left front brake line tee and to the rear brake line union under the chassis.

$171.00

70579 Master Cylinder Kit, 1982 Mustang Reman., 7/8" Bore

Aluminum Master Cylinder with adapters and adjustable brake pushrod. $90.00

35080 Adjustable Brake Pushrod , Whitby’s

$35.00

70041 Brake Light Switch Kit, Includes switch, OEM Ford bushings, and retaining clip, ‘87-‘93

$30.00

30123 Spacer, Brake Pushrod

2 required per car, supplied with 70041 Brake Light Switch Kit. $0.75

30124 Pin, Spring, Brake Pushrod

1 required per car, supplied with 70041 Brake Light Switch Kit. $2.60

30125 Bushing, Brake Pushrod

1 required per car, supplied with 70041 Brake Light Switch Kit $4.98



Brakes: (continued)

70590 Caliper Adapter Bracket Kit, Rear T-Coupe to Fox Length Axles Includes brackets, spacers, and caliper to bracket bolts. Requires flange to bracket bolts, Breeze #70086. Made in USA. $151.00

70591 Caliper Adapter Bracket Kit, ’94-’04 Mustang Rear Brakes to Fox Length Axles Includes brackets, spacers, and caliper to bracket bolts. Requires flange to bracket bolts, Breeze #70086. Made in USA. $166.00

70606 Moan Brace Set Moan Brace set for Cobra rear calipers when used with 8.8" solid axles. These braces link the caliper mounting points to the axle tube, which adds stability and reduces vibration and noise or "moan". OEM Ford. $75.00

breeze catalog brake 092409 - breeze automotive factory ... · 71008 - ezepak stop sn95-gt front™...

Documents