british standard-quick reference guide 2009-11-nov

BS 7996 ................................................................8

BS EN ISO 204 ................................................8, 25

BS EN 415 ......................................................8, 21

BS EN 486 ............................................................8

BS EN 487 ............................................................8

BS EN ISO 642 ....................................................26

BS EN ISO 643 ....................................................26

BS EN 704 ..........................................................21

BS EN 745 ..........................................................21

BS EN 908 ..........................................................21

BS EN 909 ..........................................................21

BS EN 1264 ........................................................10

BS EN 1570 ........................................................21

BS EN 1677 ........................................................21

BS EN 2115 ........................................................10

BS EN 2209 ........................................................10

BS EN 2398 ........................................................10

BS EN 2399 ........................................................10

BS EN 2439 ........................................................10

BS EN 2460 ........................................................10

BS EN 2461 ........................................................10

BS EN 2466 ........................................................10

BS EN ISO 2503 ............................................10, 25

BS EN ISO 2639 ..................................................26

BS EN 2812 ........................................................10

BS EN 3155 ........................................................11

BS EN ISO 3651 ..................................................26

BS EN 3745 ........................................................11

BS EN ISO 3887 ..................................................26

BS EN 4604 ........................................................11

BS EN 4618 ........................................................11

BS EN 4632 ........................................................11

BS EN ISO 5674 ..................................................11

BS EN ISO 7539 ............................................16, 19

BS EN ISO 8178 ............................................17, 25

BS EN 10160 ......................................................26

BS EN 10229 ......................................................26

BS EN 10230 ......................................................26

BS EN 10244 ......................................................26

BS EN 10291 ..................................................8, 25

BS EN 10306 ......................................................26

BS EN 10307 ......................................................26

BS EN 10308 ......................................................26

BS EN 10315 ......................................................11

BS EN 10323 ......................................................26

BS EN 10324 ......................................................26

BS EN 10328 ......................................................26

BS EN ISO 11680 ................................................11

BS EN 12159 ......................................................21

BS EN ISO 12217 ................................................21

BS EN 12385 ......................................................21

BS EN 12717 ......................................................21

BS EN 12844 ......................................................19

BS EN 13118 ......................................................21

BS EN 13445 ......................................................12

BS EN 13480 ......................................................21

BS EN ISO 13704 ................................................19

BS EN 13736 ......................................................21

BS EN 13898 ......................................................22

BS EN 13918 ................................................10, 25

BS EN 14295 ................................................14, 25

BS EN ISO 14314 ................................................12

BS EN ISO 14982 ................................................12

BS EN 15377 ......................................................10

BS EN ISO 26304 ..........................................14, 25

BS EN 60974 ......................................................15

BS EN 61496 ......................................................22

BS ISO 2563 .................................................16, 25

BS ISO 3086 .......................................................24

BS EN 15784 ......................................................12

BS EN 15785 ......................................................12

BS EN 15786 ......................................................14

BS EN 15787 ......................................................14

BS EN 15788 ......................................................14

BS EN 15789 ......................................................14

BS EN 15791 ......................................................14

BS EN 15792 ......................................................14

BS EN ISO 23275 ..........................................16, 19

BS EN ISO 27107 ..........................................16, 19

BS EN ISO 30024 ................................................14

BS ISO 1871 .......................................................16

BS ISO 4149 .......................................................24

BS ISO 4387 .......................................................22

BS ISO 4720 .......................................................17

BS ISO 6670 .......................................................24

BS ISO 6673 .......................................................24

BS ISO 8936 .................................................16, 19

BS ISO 9116 .......................................................24

BS ISO 10935 ...............................................17, 24

BS ISO 14183 ...............................................16, 19

BS ISO 15303 ...............................................16, 19

BS ISO 23275 ...............................................16, 19

BS ISO 27107 ...............................................16, 19

Electrotechnical

BS 7846 ................................................................8

BS 9090 ..............................................................24

BS EN 55011 ......................................................25

BS EN 55016 ......................................................25

BS EN 55103 ................................................14, 15

BS EN 60034 ......................................................25

BS EN 60099 ......................................................22

BS EN 60264 ......................................................22

BS EN 60286 ......................................................22

BS EN 60309 ......................................................25

BS EN 60512 ......................................................15

BS EN 60603 ......................................................15

BS EN 60730 ......................................................20

BS EN 60745 ................................................22, 25

BS EN 60747 ......................................................22

BS EN 60947 ......................................................22

BS EN 60966 ......................................................15

BS EN 61000 ................................................20, 22

BS EN 61076 ......................................................15

BS EN 61188 ......................................................15

BS EN 61199 ......................................................25

BS EN 61204 ......................................................22

BS EN 61300 ......................................................15

BS EN 61558 ................................................15, 22

BS EN 61857 ......................................................15

BS EN 61937 ......................................................25

BS EN 61966 ......................................................15

BS EN 62501 ......................................................15

BS EN 62516 ......................................................15

BS ISO 6469 .......................................................17

DD IEC TS 60034 ................................................25

PD IEC/TR 60919 ................................................18

PD IEC/TR 62343 ................................................18

Engineering

BS 47 ..................................................................23

BS 64 ..................................................................23

BS 848 ................................................................20

BS 4521 ..............................................................23

BS 4825 ..............................................................20

BS 5892 ..............................................................23

BS 7865 ..............................................................23

The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.

Building and civil engineering

BS 594 ................................................................24

BS 1139 ................................................................8

BS 3621 ..............................................................20

BS 4987 ..............................................................24

BS 5400 ........................................................10, 24

BS 6465 ..............................................................20

BS 6912 ..............................................................25

BS 7533 ..............................................................20

BS 8204 ..............................................................20

BS 8621 ..............................................................20

BS 10621 ............................................................20

DD CEN/TS 13354 ........................................12, 25

DD CEN/TS 15082 ..............................................26

BS EN 47 ............................................................25

BS EN 48 ............................................................25

BS EN 49 ............................................................26

BS EN 117 ..........................................................26

BS EN 118 ..........................................................26

BS EN 500 ....................................................21, 25

BS EN 1337 ..................................................10, 24

BS EN ISO 10321 ................................................11

BS EN 12111 ......................................................21

BS EN 12336 ......................................................25

BS EN 12369 ......................................................11

BS EN 12390 ......................................................11

BS EN 12418 ......................................................25

BS EN 12504 ......................................................11

BS EN 12591 ......................................................12

BS EN 12978 ......................................................21

BS EN 13108 ......................................................24

BS EN 13353 ......................................................12

BS EN 13354 ................................................12, 25

BS EN 13384 ......................................................21

BS EN 13531 ......................................................25

BS EN 15258 ......................................................12

BS EN 15736 ......................................................12

BS EN 15737 ......................................................12

BS EN ISO 22476 ................................................14

PD CEN/TR 15840 ...............................................18

Consumer products and services

BS 919 ................................................................19

BS 1044 ..............................................................19

BS 1916 ................................................................8

BS 4285 ..............................................................24

BS 4500 ..........................................................8, 24

BS 5665 ..............................................................20

BS 5752 ..............................................................24

BS 5763 ........................................................19, 24

BS 7012 ........................................................17, 24

BS 7188 ..............................................................20

BS 7272 ..............................................................19

BS 7958 ................................................................8

BS 8484 ................................................................8

BS EN 71 ........................................................8, 20

BS EN ISO 676 ....................................................10

BS EN 957 ..........................................................10

BS EN ISO 8936 ............................................16, 19

BS EN ISO 11290 ..........................................19, 24

BS EN ISO 14183 ..........................................16, 19

BS EN ISO 15303 ..........................................16, 19

BS EN 15428 ................................................12, 19

BS EN 15781 ......................................................12

British Standards - Quick Reference Guide

4 Update Standards Nov 2009Prices may be subject to change.

BS 8621 ..............................................................20

BS 8901 ................................................................8

BS 8902 ................................................................8

BS 9090 ..............................................................24

BS 10621 ............................................................20

BIP 2155 .............................................................18

BIP 2187 .............................................................18

KIT 203 ...............................................................18

KIT 204 ...............................................................18

DD CEN/TS 13354 ........................................12, 25

DD CEN/TS 15082 ..............................................26

BS EN 47 ............................................................25

BS EN 48 ............................................................25

BS EN 49 ............................................................26

BS EN 71 ........................................................8, 20

BS EN 117 ..........................................................26

BS EN 118 ..........................................................26

BS EN ISO 204 ................................................8, 25

BS EN 415 ......................................................8, 21

BS EN 486 ............................................................8

BS EN 487 ............................................................8

BS EN 500 ....................................................21, 25

BS EN 614 ..........................................................21

BS EN ISO 642 ....................................................26

BS EN ISO 643 ....................................................26

BS EN ISO 676 ....................................................10

BS EN 704 ..........................................................21

BS EN 745 ..........................................................21

BS EN ISO 844 ..............................................16, 19

BS EN 868 ..........................................................10

BS EN 908 ..........................................................21

BS EN 909 ..........................................................21

BS EN 957 ..........................................................10

BS EN ISO/IEC 17030 ..........................................14

BS EN 1264 ........................................................10

BS EN 1337 ..................................................10, 24

BS EN 1570 ........................................................21

BS EN 1677 ........................................................21

BS EN ISO 2080 ......................................16, 19, 25

BS EN 2115 ........................................................10

BS EN 2209 ........................................................10

BS EN 2398 ........................................................10

BS EN 2399 ........................................................10

BS EN 2439 ........................................................10

BS EN 2460 ........................................................10

BS EN 2461 ........................................................10

BS EN 2466 ........................................................10

BS EN ISO 2503 ............................................10, 25

BS EN ISO 2639 ..................................................26

BS EN 2812 ........................................................10

BS EN 3155 ........................................................11

BS EN ISO 3651 ..................................................26

BS EN 3745 ........................................................11

BS EN ISO 3822 ..................................................21

BS EN ISO 3887 ..................................................26

BS EN 4604 ........................................................11

BS EN 4618 ........................................................11

BS EN 4632 ........................................................11

BS EN ISO 5674 ..................................................11

BS EN ISO 5840 ..................................................11

BS EN ISO 7539 ............................................16, 19

BS EN ISO 7711 ..................................................21

BS EN ISO 8178 ............................................17, 25

BS EN ISO 8257 ............................................11, 25

BS EN ISO 8936 ............................................16, 19

BS EN ISO 9241 ..................................................11

BS EN ISO 9713 ..................................................11

BS EN 10160 ......................................................26

BS EN 10229 ......................................................26

BS EN ISO/IEC 17030 ..........................................14

Materials and chemicals

BS 2000 ..............................................................23

BS EN ISO 844 ..............................................16, 19

BS EN 868 ..........................................................10

BS EN ISO 2080 ......................................16, 19, 25

BS EN ISO 8257 ............................................11, 25

BS EN ISO 10548 ................................................19

BS EN ISO 12213 ................................................11

BS EN 12470 ......................................................21

BS EN 12508 ......................................................25

BS EN 12613 ......................................................19

BS EN 12926 ......................................................12

BS EN 14880 ......................................................26

BS EN 14881 ......................................................26

BS EN ISO 14896 ................................................12

BS EN ISO 15883 ................................................14

BS EN ISO 20182 ................................................14

BS EN ISO 26845 ................................................14

BS EN ISO 26945 ..........................................16, 19

BS ISO 96 ...........................................................16

BS ISO 366 .........................................................16

BS ISO 844 ...................................................16, 19

BS ISO 2080 .................................................16, 19

BS ISO 2930 .......................................................22

BS ISO 8257 .................................................11, 25

BS ISO 10928 .....................................................17

BS ISO 18352 .....................................................17

BS ISO 22309 .....................................................24

BS ISO 26945 ...............................................16, 19

Alpha-numeric sequence of BritishStandards quoted in this issue

BS 47 ..................................................................23

BS 64 ..................................................................23

BS 594 ................................................................24

BS 848 ................................................................20

BS 919 ................................................................19

BS 1044 ..............................................................19

BS 1139 ................................................................8

BS 1916 ................................................................8

BS 2000 ..............................................................23

BS 3621 ..............................................................20

BS 4285 ..............................................................24

BS 4500 ..........................................................8, 24

BS 4521 ..............................................................23

BS 4825 ..............................................................20

BS 4987 ..............................................................24

BS 5400 ........................................................10, 24

BS 5665 ..............................................................20

BS 5752 ..............................................................24

BS 5763 ........................................................19, 24

BS 5892 ..............................................................23

BS 6068 ..............................................................22

BS 6465 ..............................................................20

BS 6912 ..............................................................25

BS 7012 ........................................................17, 24

BS 7188 ..............................................................20

BS 7272 ..............................................................19

BS 7533 ..............................................................20

BS 7846 ................................................................8

BS 7863 ................................................................8

BS 7865 ..............................................................23

BS 7958 ................................................................8

BS 7996 ................................................................8

BS 8204 ..............................................................20

BS 8484 ................................................................8

BS ISO 4378 .................................................16, 17

BS ISO 6020 .................................................20, 25

BS ISO 7539 .................................................16, 19

BS ISO 8082 .................................................17, 25

BS ISO 8131 .......................................................25

BS ISO 8178 .................................................17, 25

BS ISO 12132 .....................................................24

BS ISO 13778 .....................................................24

BS ISO 14695 .....................................................20

BS ISO 17338 .....................................................17

BS ISO 26021 .....................................................20

BS ISO 27956 .....................................................17

BS IEC 60988 ......................................................18

BS IEC 61226 ......................................................18

BS IEC 61559 ......................................................18

PD 5500 .............................................................22

PD ISO/TR 10064 ................................................18

BS C 18 ........................................................16, 25

BS Z 17 ...............................................................20

Health and environment

BS 6068 ..............................................................22

BS 7863 ................................................................8

BS EN 614 ..........................................................21

BS EN ISO 3822 ..................................................21

BS EN ISO 5840 ..................................................11

BS EN ISO 7711 ..................................................21

BS EN ISO 9241 ..................................................11

BS EN ISO 9713 ..................................................11

BS EN ISO 12866 ................................................21

BS EN 13890 ......................................................12

BS EN 14299 ......................................................14

BS EN 14710 ......................................................22

BS EN 15170 ......................................................19

BS EN 15269 ......................................................12

BS EN ISO 16588 ................................................22

BS EN ISO 21534 ................................................14

BS EN ISO 21535 ................................................14

BS EN ISO 21536 ................................................14

BS EN ISO 22794 ................................................14

BS EN ISO 25539 ................................................14

BS EN 61676 ......................................................22

BS ISO 362 .........................................................20

BS ISO 1503 .......................................................16

BS ISO 18857 .....................................................17

PD ISO/TR 9241 ..................................................18

Information systems

BS ISO/IEC 7810 .................................................17

BS ISO/IEC 7811 .................................................17

BS ISO/IEC 7816 .................................................22

BS ISO/IEC 9541 .................................................22

BS ISO 10957 .....................................................17

BS ISO 11506 .....................................................17

BS ISO/IEC 13250 ...............................................17

BS ISO/IEC 14443 ...............................................17

BS ISO/IEC 15946 ...............................................20

BS ISO/IEC 18031 ...............................................20

BS ISO 19144 .....................................................17

BS ISO/IEC 19757 ...............................................17

BS ISO/IEC 29109 ...............................................18

BS ISO/IEC 29794 ...............................................18

DD IEC/PAS 61784 ..............................................18

DD IEC/PAS 62633 ..............................................18

PD ISO/IEC TR 15446 ..........................................18

Management systems

BS 8901 ................................................................8

BS 8902 ................................................................8

Update Standards Nov 2009 Prices may be subject to change. 5

British Standards - Quick Reference Guide continued...

BS ISO 3086 .......................................................24

BS ISO 4149 .......................................................24

BS ISO 4378 .................................................16, 17

BS ISO 4387 .......................................................22

BS ISO 4720 .......................................................17

BS ISO 6020 .................................................20, 25

BS ISO 6469 .......................................................17

BS ISO 6670 .......................................................24

BS ISO 6673 .......................................................24

BS ISO 7539 .................................................16, 19

BS ISO/IEC 7810 .................................................17

BS ISO/IEC 7811 .................................................17

BS ISO/IEC 7816 .................................................22

BS ISO 8082 .................................................17, 25

BS ISO 8131 .......................................................25

BS ISO 8178 .................................................17, 25

BS ISO 8257 .................................................11, 25

BS ISO 8936 .................................................16, 19

BS ISO 9116 .......................................................24

BS ISO/IEC 9541 .................................................22

BS ISO 10928 .....................................................17

BS ISO 10935 ...............................................17, 24

BS ISO 10957 .....................................................17

BS ISO 11506 .....................................................17

BS ISO 12132 .....................................................24

BS ISO/IEC 13250 ...............................................17

BS ISO 13778 .....................................................24

BS ISO 14183 ...............................................16, 19

BS ISO/IEC 14443 ...............................................17

BS ISO 14695 .....................................................20

BS ISO 15303 ...............................................16, 19

BS ISO/IEC 15946 ...............................................20

BS ISO 17338 .....................................................17

BS ISO/IEC 18031 ...............................................20

BS ISO 18352 .....................................................17

BS ISO 18857 .....................................................17

BS ISO 19144 .....................................................17

BS ISO/IEC 19757 ...............................................17

BS ISO 22309 x....................................................24

BS ISO 23275 ...............................................16, 19

BS ISO 26021 .....................................................20

BS ISO 26945 ...............................................16, 19

BS ISO 27107 ...............................................16, 19

BS ISO 27956 .....................................................17

BS ISO/IEC 29109 ...............................................18

BS ISO/IEC 29794 ...............................................18

BS IEC 60988 ......................................................18

BS IEC 61226 ......................................................18

BS IEC 61559 ......................................................18

DD IEC/PAS 61784 ..............................................18

DD IEC/PAS 62633 ..............................................18

DD IEC TS 60034 ................................................25

PD CEN/TR 15840 ...............................................18

PD 5500 .............................................................22

PD ISO/TR 9241 ..................................................18

PD ISO/TR 10064 ................................................18

PD ISO/IEC TR 15446 ..........................................18

PD IEC/TR 60919 ................................................18

PD IEC/TR 62343 ................................................18

BS C 18 ........................................................16, 25

BS Z 17 ...............................................................20

PAS 82 ................................................................18

BS EN 15781 ......................................................12

BS EN 15784 ......................................................12

BS EN 15785 ......................................................12

BS EN 15786 ......................................................14

BS EN 15787 ......................................................14

BS EN 15788 ......................................................14

BS EN 15789 ......................................................14

BS EN 15791 ......................................................14

BS EN 15792 ......................................................14

BS EN ISO 15883 ................................................14

BS EN ISO 16588 ................................................22

BS EN ISO 20182 ................................................14

BS EN ISO 21534 ................................................14

BS EN ISO 21535 ................................................14

BS EN ISO 21536 ................................................14

BS EN ISO 22476 ................................................14

BS EN ISO 22794 ................................................14

BS EN ISO 23275 ..........................................16, 19

BS EN ISO 25539 ................................................14

BS EN ISO 26304 ..........................................14, 25

BS EN ISO 26845 ................................................14

BS EN ISO 26945 ..........................................16, 19

BS EN ISO 27107 ..........................................16, 19

BS EN ISO 30024 ................................................14

BS EN 55011 ......................................................25

BS EN 55016 ......................................................25

BS EN 55103 ................................................14, 15

BS EN 60034 ......................................................25

BS EN 60099 ......................................................22

BS EN 60264 ......................................................22

BS EN 60286 ......................................................22

BS EN 60309 ......................................................25

BS EN 60512 ......................................................15

BS EN 60603 ......................................................15

BS EN 60730 ......................................................20

BS EN 60745 ................................................22, 25

BS EN 60747 ......................................................22

BS EN 60947 ......................................................22

BS EN 60966 ......................................................15

BS EN 60974 ......................................................15

BS EN 61000 ................................................20, 22

BS EN 61076 ......................................................15

BS EN 61188 ......................................................15

BS EN 61199 ......................................................25

BS EN 61204 ......................................................22

BS EN 61300 ......................................................15

BS EN 61496 ......................................................22

BS EN 61558 ................................................15, 22

BS EN 61676 ......................................................22

BS EN 61857 ......................................................15

BS EN 61937 ......................................................25

BS EN 61966 ......................................................15

BS EN 62501 ......................................................15

BS EN 62516 ......................................................15

BS ISO 96 ...........................................................16

BS ISO 362 .........................................................20

BS ISO 366 .........................................................16

BS ISO 844 ...................................................16, 19

BS ISO 1503 .......................................................16

BS ISO 1871 .......................................................16

BS ISO 2080 .................................................16, 19

BS ISO 2563 .................................................16, 25

BS ISO 2930 .......................................................22

BS EN 10230 ......................................................26

BS EN 10244 ......................................................26

BS EN 10291 ..................................................8, 25

BS EN 10306 ......................................................26

BS EN 10307 ......................................................26

BS EN 10308 ......................................................26

BS EN 10315 ......................................................11

BS EN ISO 10321 ................................................11

BS EN 10323 ......................................................26

BS EN 10324 ......................................................26

BS EN 10328 ......................................................26

BS EN ISO 10548 ................................................19

BS EN ISO 11290 ..........................................19, 24

BS EN ISO 11680 ................................................11

BS EN 12111 ......................................................21

BS EN 12159 ......................................................21

BS EN ISO 12213 ................................................11

BS EN ISO 12217 ................................................21

BS EN 12336 ......................................................25

BS EN 12369 ......................................................11

BS EN 12385 ......................................................21

BS EN 12390 ......................................................11

BS EN 12418 ......................................................25

BS EN 12470 ......................................................21

BS EN 12504 ......................................................11

BS EN 12508 ......................................................25

BS EN 12591 ......................................................12

BS EN 12613 ......................................................19

BS EN 12717 ......................................................21

BS EN 12844 ......................................................19

BS EN ISO 12866 ................................................21

BS EN 12926 ......................................................12

BS EN 12978 ......................................................21

BS EN 13108 ......................................................24

BS EN 13118 ......................................................21

BS EN 13353 ......................................................12

BS EN 13354 ................................................12, 25

BS EN 13384 ......................................................21

BS EN 13445 ......................................................12

BS EN 13480 ......................................................21

BS EN 13531 ......................................................25

BS EN ISO 13704 ................................................19

BS EN 13736 ......................................................21

BS EN 13890 ......................................................12

BS EN 13898 ......................................................22

BS EN 13918 ................................................10, 25

BS EN ISO 14183 ..........................................16, 19

BS EN 14295 ................................................14, 25

BS EN 14299 ......................................................14

BS EN ISO 14314 ................................................12

BS EN 14710 ......................................................22

BS EN 14880 ......................................................26

BS EN 14881 ......................................................26

BS EN ISO 14896 ................................................12

BS EN ISO 14982 ................................................12

BS EN 15170 ......................................................19

BS EN 15258 ......................................................12

BS EN 15269 ......................................................12

BS EN ISO 15303 ..........................................16, 19

BS EN 15377 ......................................................10

BS EN 15428 ................................................12, 19

BS EN 15736 ......................................................12

BS EN 15737 ......................................................12

Alpha-numeric sequence of British Standards continued...


BS 8902:2009Responsible sourcing sector certificationschemes for construction products. Specification

no current standard is superseded

ISBN 978 0 580 64889 2

£42.00 members, £84.00 non-members

SDS/1/6

BS EN PUBLICATIONS

The following are British Standardimplementations of the English languageversions of European Standards (ENs).

BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.

Note: The date referenced in theidentifier is the date of the Europeanstandard.

BS EN 71:—Safety of toys

BS EN 71-4:2009Experimental sets for chemistry and relatedactivities

supersedes BS EN 71-4:1998+A3:2007

ISBN 978 0 580 65144 1


CW/15

BS EN ISO 204:2009Metallic materials. Uniaxial creep testing intension. Method of test

supersedes BS EN 10291:2000

ISBN 978 0 580 53648 9


ISE/NFE/4/1

BS EN 415:—Safety of packaging machines

BS EN 415-9:2009Noise measurement methods for packagingmachines, packaging lines and associatedequipment, grade of accuracy 2 and 3


ISBN 978 0 580 55661 6


MCE/3/3

BS EN 486:2009Aluminium and aluminium alloys. Extrusioningots. Specifications


ISBN 978 0 580 62123 9


NFE/35

BS EN 487:2009Aluminium and aluminium alloys. Rollingingots. Specifications


ISBN 978 0 580 62124 6


NFE/35

BS 1916-3:2009Guide to tolerances, limits and fits for largediameters

supersedes BS 1916-3:1963

ISBN 978 0 580 65216 5


TDW/4/-/1

BS 4500:2009Limits and fits. Guidance for system of cone(taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mmand diameters up to 500 mm

supersedes BS 4500-4:1985 and BS 4500-5:1988

ISBN 978 0 580 65211 0


TDW/4/-/1

BS 7846:2009Electric cables. Thermosetting insulated,armoured, fire-resistant cables of rated voltage600/1000 V, having low emission of smoke andcorrosive gases when affected by fire.Specification

supersedes BS 7846:2000

ISBN 978 0 580 66960 6


GEL/20/17

BS 7863:2009Recommendations for colour coding to indicatethe extinguishing media contained in portablefire extinguishers


ISBN 978 0 580 63479 6


FSH/2

BS 7958:2009Closed circuit television (CCTV). Managementand operation. Code of practice


ISBN 978 0 580 62324 0


GW/3

BS 7996:2009Torque measuring devices. Calibration andclassification using continual torque application.Method


ISBN 978 0 580 53116 3


ISE/NFE/4/1

BS 8484:2009Code of practice for the provision of loneworker device (LWD) services


ISBN 978 0 580 56163 4


GW/3

BS 8901:2009Specification for a sustainability managementsystem for events


ISBN 978 0 580 66073 3


SDS/1/-/2

BRITISH STANDARDS

The following British Standardpublications are available fromBSI Customer Services (see “How toorder” on page 2).

The publications listed below are newand revised British Standards that weremade available last month.

An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.

In all other cases of supersession, detailsare given and a corresponding entryappears in the “British Standardswithdrawn” section.

BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.

Please order by the British Standardreference not the ISBN number.

BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.

BS 1139:—Metal scaffolding

BS 1139-2.2:2009Couplers. Aluminium couplers and specialcouplers in steel. Requirements and testmethods

supersedes BS 1139-2.2:1991

ISBN 978 0 580 56969 2


B/514/21

BS 1916:—Limits and fits for engineering

BS 1916-1:2009Guide to limits and tolerances


ISBN 978 0 580 65212 7


TDW/4/-/1

BS 1916-2:2009Guide to the selection of fits in BS 1916-1


ISBN 978 0 580 65215 8


TDW/4/-/1

8 Update Standards Nov 2009Prices may be subject to change.8

British Standards

BS EN ISO 676:2009Spices and condiments. Botanical nomenclature


ISBN 978 0 580 67018 3


AW/7

BS EN 868:—Packaging for terminally sterilized medicaldevices

BS EN 868-2:2009Sterilization wrap. Requirements and testmethods

supersedes BS EN 868-2:1999

ISBN 978 0 580 54954 0


LBI/35

BS EN 868-3:2009Paper for use in the manufacture of paper bags(specified in EN 868-4) and in the manufactureof pouches and reels (specified in EN 868-5).Requirements and test methods


ISBN 978 0 580 54955 7


LBI/35

BS EN 868-4:2009Paper bags. Requirements and test methods


ISBN 978 0 580 54956 4


LBI/35

BS EN 868-5:2009Sealable pouches and reels of porous andplastic film construction. Requirements and testmethods


ISBN 978 0 580 55005 8


LBI/35

BS EN 868-6:2009Paper for low temperature sterilizationprocesses. Requirements and test methods


ISBN 978 0 580 55006 5


LBI/35

BS EN 868-7:2009Adhesive coated paper for low temperaturesterilization processes. Requirements and testmethods


ISBN 978 0 580 59166 2


LBI/35

BS EN 868-8:2009Re-usable sterilization containers for steamsterilizers conforming to EN 285. Requirementsand test methods


ISBN 978 0 580 59167 9


LBI/35

BS EN Publications continued...


BS EN 2398:2008Aerospace series. Heat resisting steel FE-PA2601(X6NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars formachined bolts. D ≤ 25 mm


ISBN 978 0 580 59769 5


ACE/61

BS EN 2399:2008Aerospace series. Heat resisting steel FE-PA2601(X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars forforged bolts. D ≤ 25 mm


ISBN 978 0 580 60977 0


ACE/61/-/15

BS EN 2439:2009Aerospace series. Steel FE-PL2102 (34NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Forgings. De ≤40 mm


ISBN 978 0 580 63178 8


ACE/61

BS EN 2460:2009Aerospace series. Steel FE-PM1901 (X12CrNi13).600 MPa ≤ Rm ≤ 800 MPa. Bars. De ≤ 70 mm


ISBN 978 0 580 63181 8


ACE/61

BS EN 2461:2009Aerospace series. Steel FE-PM1901 (X12CrNi13).600 MPa ≤ Rm ≤ 800 MPa. Forgings. De ≤ 70 mm


ISBN 978 0 580 63182 5


ACE/61

BS EN 2466:2009Aerospace series. Steel FE-PA3901 (X2CrNi19-11).Softened. Forgings. De ≤ 100 mm


ISBN 978 0 580 63183 2


ACE/61

BS EN ISO 2503:2009Gas welding equipment. Pressure regulatorsand pressure regulators with flow-meteringdevices for gas cylinders used in welding,cutting and allied processes up to 300 bar (30 MPa)

supersedes BS EN 13918:2003 andBS EN ISO 2503:1998

ISBN 978 0 580 60488 1


WEE/18

BS EN 2812:2009Aerospace series. Stripping of electric cables


ISBN 978 0 580 68925 3


ACE/6

10

BS EN 868-9:2009Uncoated nonwoven materials of polyolefines.Requirements and test methods


ISBN 978 0 580 59168 6


LBI/35

BS EN 868-10:2009Adhesive coated nonwoven materials ofpolyolefines. Requirements and test methods


ISBN 978 0 580 59169 3


LBI/35

BS EN 957:—Stationary training equipment

BS EN 957-5:2009Stationary exercise bicycles and upper bodycrank training equipment, additional specificsafety requirements and test methods


ISBN 978 0 580 58892 1


SW/136/4

BS EN 1264:—Water based surface embedded heating andcooling systems

BS EN 1264-3:2009Dimensioning

supersedes BS EN 1264-3:1998 which is withdrawnand BS EN 15377-2:2008 which remains current

ISBN 978 0 580 59452 6


RHE/6

BS EN 1337:—Structural bearings

BS EN 1337-8:2007Guide bearings and restraint bearings

supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983

ISBN 978 0 580 55858 0


B/522

BS EN 2115:2009Aerospace series. Aluminium alloy 2117-T42.Wire for solid rivets. D ≤ 10 mm


ISBN 978 0 580 57867 0


ACE/61/-/24

BS EN 2209:2008Aerospace series. Steel FE-PL1502 (25CrMo4).900 MPa ≤ Rm ≤ 1100 MPa. Sheets, strips andplates. 0,5 mm ≤ a ≤ 20 mm


ISBN 978 0 580 63263 1


ACE/61

BS EN ISO 11680-2:2008Units for use with a back-pack power source

supersedes BS EN ISO 11680-2:2001

ISBN 978 0 580 65377 3


AGE/29

BS EN ISO 12213:—Natural gas. Calculation of compression factor

BS EN ISO 12213-1:2009Introduction and guidelines


ISBN 978 0 580 67146 3


PTI/15

BS EN ISO 12213-2:2009Calculation using molar-composition analysis


ISBN 978 0 580 67147 0


PTI/15

BS EN ISO 12213-3:2009Calculation using physical properties


ISBN 978 0 580 67148 7


PTI/15

BS EN 12369:—Wood-based panels. Characteristic values forstructural design

BS EN 12369-3:2008Solid-wood panels


ISBN 978 0 580 58221 9


B/541

BS EN 12390:—Testing hardened concrete

BS EN 12390-2:2009Making and curing specimens for strength tests


ISBN 978 0 580 58796 2


B/517/1

BS EN 12504:—Testing concrete in structures

BS EN 12504-1:2009Cored specimens. Taking, examining and testingin compression


ISBN 978 0 580 58801 3


B/517/1

BS EN ISO 5840:2009Cardiovascular implants. Cardiac valveprostheses

supersedes BS EN ISO 5840:2005

ISBN 978 0 580 68135 6


CH/150/2

BS EN ISO 8257:—Plastics. Poly(methyl methacrylate) (PMMA)moulding and extrusion materials

BS EN ISO 8257-1:2006Designation system and basis for specifications

supersedes BS ISO 8257-1:1987

ISBN 978 0 580 67582 9


PRI/82

BS EN ISO 9241:—Ergonomics of human-system interaction

BS EN ISO 9241-306:2008Field assessment methods for electronic visualdisplays


ISBN 978 0 580 54345 6


PH/9

BS EN ISO 9713:2009Neurosurgical implants. Self-closing intracranialaneurysm clips


ISBN 978 0 580 68137 0


CH/150/3

BS EN 10315:2006Routine method for analysis of high alloy steelby X-ray fluorescence spectrometry (XRF) byusing a near by technique


ISBN 978 0 580 68841 6


ISE/18

BS EN ISO 10321:2008Geosynthetics. Tensile test for joints/seams bywide-width strip method


ISBN 978 0 580 53428 7


B/553

BS EN ISO 11680:—Machinery for forestry. Safety requirements andtesting for pole-mounted powered pruners

BS EN ISO 11680-1:2008Units fitted with an integral combustion engine


ISBN 978 0 580 65376 6


AGE/29

BS EN 3155:—Aerospace series. Electrical contacts used inelements of connection

BS EN 3155-009:2009Contacts, electrical, female, type A, crimp, class S. Product standard


ISBN 978 0 580 60573 4


ACE/6

BS EN 3745:—Aerospace series. Fibres and cables, optical,aircraft use. Test methods

BS EN 3745-506:2009Impact resistance


ISBN 978 0 580 67498 3


ACE/6

BS EN 4604:—Aerospace series. Cable, electrical, for signaltransmission

BS EN 4604-002:2009General


ISBN 978 0 580 61444 6


ACE/6

BS EN 4604-008:2009Cable, coaxial, 50 ohms, 200°C., Type WD.Product standard


ISBN 978 0 580 63701 8


ACE/6

BS EN 4618:2009Aerospace series. Aircraft internal air qualitystandards, criteria and determination methods


ISBN 978 0 580 54241 1


ACE/38

BS EN 4632:—Aerospace series. Welded and brazed assembliesfor aerospace constructions. Weldability andbrazeability of materials

BS EN 4632-002:2008Homogeneous assemblies aluminium andaluminium alloys


ISBN 978 0 580 60592 5


ACE/61

BS EN ISO 5674:2009Tractors and machinery for agriculture andforestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptancecriteria


ISBN 978 0 580 64626 3


AGE/6


BS EN 15269:—Extended application of test results for fireresistance and/or smoke control for door,shutter and openable window assemblies,including their elements of building hardware

BS EN 15269-20:2009Smoke control for hinged and pivoted steel,timber and metal framed glazed doorsets


ISBN 978 0 580 65716 0


FSH/22/5

BS EN 15428:2007Soil improvers and growing media.Determination of particle size distribution


ISBN 978 0 580 69206 2


AW/20

BS EN 15736:2009Timber structures. Test methods. Withdrawalcapacity of punched metal plate fasteners inhandling and erection of prefabricated trusses


ISBN 978 0 580 57299 9


B/518

BS EN 15737:2009Timber structures. Test methods. Torsionalresistance of driving in screws


ISBN 978 0 580 60935 0


B/518

BS EN 15781:2009Animal feeding stuffs. Determination ofmaduramicin-ammonium by reversed-phaseHPLC using post-column derivatisation


ISBN 978 0 580 61797 3


AW/10

BS EN 15784:2009Animal feeding stuffs. Isolation andenumeration of presumptive Bacillus spp.


ISBN 978 0 580 61800 0


AW/10

BS EN 15785:2009Animal feeding stuffs. Isolation andenumeration of Bifidobacterium spp.


ISBN 978 0 580 61801 7


AW/10

BS EN 13445-5:2009Inspection and testing


ISBN 978 0 580 65571 5


PVE/1

Also available as part of KIT 203 and KIT 204.

BS EN 13445-6:2009Requirements for the design and fabrication ofpressure vessels and pressure parts constructedfrom spheroidal graphite cast iron


ISBN 978 0 580 65573 9


PVE/1


BS EN 13445-8:2009Additional requirements for pressure vessels ofaluminium and aluminium alloys


ISBN 978 0 580 65652 1


PVE/1

Also available as part of KIT 204.

BS EN 13890:2009Workplace exposure. Procedures for measuringmetals and metalloids in airborne particles.Requirements and test methods


ISBN 978 0 580 58636 1


EH/2/2

BS EN ISO 14314:2009Reciprocal internal combustion engines. Recoilstarting equipment. General safetyrequirements


ISBN 978 0 580 68920 8


MCE/14/-/4

BS EN ISO 14896:2009Plastics. Polyurethane raw materials.Determination of isocyanate content


ISBN 978 0 580 65655 2


PRI/42

BS EN ISO 14982:2009Agricultural and forestry machinery.Electromagnetic compatibility. Test methodsand acceptance criteria


ISBN 978 0 580 64627 0


AGE/6

BS EN 15258:2008Precast concrete products. Retaining wallelements


ISBN 978 0 580 55480 3


B/524

BS EN 12591:2009Bitumen and bituminous binders. Specificationsfor paving grade bitumens


ISBN 978 0 580 64101 5


B/510/19

BS EN 12926:2008Chemicals used for treatment of water intendedfor human consumption. Sodiumperoxodisulfate


ISBN 978 0 580 58048 2


CII/59

BS EN 13353:2008Solid wood panels (SWP). Requirements


ISBN 978 0 580 58228 8


B/541

BS EN 13354:2008Solid wood panels (SWP). Bonding quality. Testmethod

supersedes DD CEN/TS 13354:2003

ISBN 978 0 580 58229 5


B/541

BS EN 13445:—Unfired pressure vessels

BS EN 13445-1:2009General


ISBN 978 0 580 65557 9


PVE/1


BS EN 13445-2:2009Materials


ISBN 978 0 580 65560 9


PVE/1


BS EN 13445-3:2009Design


ISBN 978 0 580 65562 3


PVE/1


BS EN 13445-4:2009Fabrication


ISBN 978 0 580 65565 4


PVE/1




BS EN ISO 22476:—Geotechnical investigation and testing. Fieldtesting

BS EN ISO 22476-12:2009Mechanical cone penetration test (CPTM)


ISBN 978 0 580 54688 4


B/526/3

BS EN ISO 22794:2009Dentistry. Implantable materials for bone fillingand augmentation in oral and maxillofacialsurgery. Contents of a technical file


ISBN 978 0 580 68507 1


CH/106/8

BS EN ISO 25539:—Cardiovascular implants. Endovascular devices

BS EN ISO 25539-2:2008Vascular stents

supersedes BS EN 14299:2004 which remainscurrent

ISBN 978 0 580 64581 5


CH/150/2

BS EN ISO 26304:2009Welding consumables. Solid wire electrodes,tubular cored electrodes and electrode-fluxcombinations for submerged arc welding ofhigh strength steels. Classification


ISBN 978 0 580 64192 3


WEE/39

BS EN ISO 26845:2008Chemical analysis of refractories. Generalrequirements for wet chemical analysis, atomicabsorption spectrometry (AAS) and inductivelycoupled plasma atomic emission spectrometry(ICP-AES) methods


ISBN 978 0 580 57415 3


RPI/1

BS EN ISO 30024:2009Animal feeding stuffs. Determination ofphytase activity


ISBN 978 0 580 62651 7


AW/10

BS EN 55103:—Electromagnetic compatibility. Product familystandard for audio, video, audio-visual andentertainment lighting control apparatus forprofessional use

BS EN 55103-1:2009Emissions

supersedes BS EN 55103-1:1997 which remainscurrent

ISBN 978 0 580 55923 5


GEL/210/11

BS EN ISO 15883-2:2009Requirements and tests for washer-disinfectorsemploying thermal disinfection for surgicalinstruments, anaesthetic equipment, bowls,dishes, receivers, utensils, glassware, etc.


ISBN 978 0 580 66664 3


LBI/35

BS EN ISO 15883-3:2009Requirements and tests for washer-disinfectorsemploying thermal disinfection for humanwaste containers


ISBN 978 0 580 66660 5


LBI/35

BS EN ISO 15883-4:2009Requirements and tests for washer-disinfectorsemploying chemical disinfection forthermolabile endoscopes


ISBN 978 0 580 66661 2


LBI/35

BS EN ISO/IEC 17030:2009Conformity assessment. General requirementsfor third-party marks of conformity


ISBN 978 0 580 69024 2


CAS/1

BS EN ISO 20182:2008Refractory test-piece preparation. Gunningrefractory panels by the pneumatic-nozzlemixing type guns


ISBN 978 0 580 57348 4


RPI/1

BS EN ISO 21534:2009Non-active surgical implants. Joint replacementimplants. Particular requirements


ISBN 978 0 580 68118 9


CH/150/4

BS EN ISO 21535:2009Non-active surgical implants. Joint replacementimplants. Specific requirements for hip-jointreplacement implants


ISBN 978 0 580 68119 6


CH/150/4

BS EN ISO 21536:2009Non-active surgical implants. Joint replacementimplants. Specific requirements for knee-jointreplacement implants


ISBN 978 0 580 68127 1


CH/150/4

BS EN 15786:2009Animal feeding stuffs. Isolation andenumeration of Pediococcus spp.


ISBN 978 0 580 61802 4


AW/10

BS EN 15787:2009Animal feeding stuffs. Isolation andenumeration of Lactobacillus spp.


ISBN 978 0 580 61803 1


AW/10

BS EN 15788:2009Animal feeding stuffs. Isolation andenumeration of Enterococcus (E. faecium) spp.


ISBN 978 0 580 61804 8


AW/10

BS EN 15789:2009Animal feeding stuffs. Isolation andenumeration of yeast probiotic strains


ISBN 978 0 580 61805 5


AW/10

BS EN 15791:2009Foodstuffs. Determination of deoxynivalenol inanimal feed. HPLC method with immunoaffinitycolumn clean-up


ISBN 978 0 580 61807 9


AW/10

BS EN 15792:2009Animal feeding stuffs. Determination ofzearalenone in animal feed. High performanceliquid chromatographic method withfluorescence detection and immunoaffinitycolumn clean-up


ISBN 978 0 580 61808 6


AW/10

BS EN ISO 15883:—Washer-disinfectors

BS EN ISO 15883-1:2009General requirements, terms and definitionsand tests


ISBN 978 0 580 66657 5


LBI/35



To order visit

www.bsigroup.com/shop

BS EN 61558:—Safety of transformers, reactors, power supplyunits and similar products for supply voltagesup to 1100 V

BS EN 61558-2-4:2009Particular requirements and tests for isolatingtransformers and power supply unitsincorporating isolating transformers

supersedes BS EN 61558-2-4:1998

ISBN 978 0 580 57892 2


PEL/96

BS EN 61857:—Electrical insulation systems. Procedures forthermal evaluation

BS EN 61857-1:2009General requirements. Low-voltage


ISBN 978 0 580 62003 4


GEL/112

BS EN 61966:—Multimedia systems and equipment. Colourmeasurement and management

BS EN 61966-5:2009Equipment using plasma display panels


ISBN 978 0 580 65527 2


EPL/100

BS EN 62501:2009Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) powertransmission. Electrical testing


ISBN 978 0 580 57874 8


PEL/22

BS EN 62516:—Terrestrial digital multimedia broadcasting (T-DMB) receivers

BS EN 62516-1:2009Basic requirement


ISBN 978 0 580 61850 5


EPL/100

BS EN 60974:—Arc welding equipment

BS EN 60974-8:2009Gas consoles for welding and plasma cuttingsystems


ISBN 978 0 580 58740 5


WEE/6

BS EN 61076:—Connectors for electronic equipment. Productrequirements

BS EN 61076-3-114:2009Rectangular connectors. Detail specification forprotective housings for use with 8-way shieldedand unshielded connectors for frequencies upto 600 MHz for industrial environmentsincorporating the IEC 60603-7 series interface.Variant 11 related to IEC 61076-3-106. Bayonetcoupling type


ISBN 978 0 580 56741 4


EPL/48

BS EN 61076-3-117:2009Rectangular connectors. Detail specification forprotective housings for use with 8-way shieldedand unshielded connectors for industrialenvironments incorporating the IEC 60603-7series interface. Variant 14 related to IEC 61076-3-106. Push-pull coupling


ISBN 978 0 580 63068 2


EPL/48

BS EN 61188:—Printed boards and printed board assemblies.Design and use

BS EN 61188-7:2009Electronic component zero orientation for CADlibrary construction


ISBN 978 0 580 59866 1


EPL/501

BS EN 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures

BS EN 61300-2-34:2009Tests. Resistance to solvents and contaminatingfluids of interconnecting components andclosures


ISBN 978 0 580 55781 1


GEL/86/2

BS EN 55103-2:2009Immunity

supersedes BS EN 55103-2:1997 which remainscurrent

ISBN 978 0 580 55924 2


GEL/210/11

BS EN 60512:—Connectors for electronic equipment. Tests andmeasurements

BS EN 60512-26-100:2008Measurement setup, test and referencearrangements and measurements forconnectors according to IEC 60603-7. Tests 26ato 26g

partially supersedes BS EN 60603-7-1:2002,BS EN 60603-7-4:2005 and BS EN 60603-7-7:2006

ISBN 978 0 580 57085 8


EPL/48

BS EN 60966:—Radio frequency and coaxial cable assemblies

BS EN 60966-2-1:2009Sectional specification for flexible coaxial cableassemblies


ISBN 978 0 580 61636 5


EPL/46

BS EN 60966-2-3:2009Detail specification for flexible coaxial cable assemblies. Frequency range 0 MHz to1000 MHz, IEC 61169-8 connectors


ISBN 978 0 580 61639 6


EPL/46

BS EN 60966-2-4:2009Detail specification for cable assemblies forradio and TV receivers. Frequency range 0 MHzto 3000 MHz, IEC 61169-2 connectors


ISBN 978 0 580 58183 0


EPL/46



ISBN 978 0 580 57277 7


EPL/46



ISBN 978 0 580 57278 4


EPL/46


Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

BS ISO 366-3:2009Dimensions and designation of metal reedswith double-spring baulk


ISBN 978 0 580 57693 5


TCI/33

BS ISO 1503:2008Spatial orientation and direction of movement.Ergonomic requirements


ISBN 978 0 580 68950 5


PH/9

BS ISO 1871:2009Food and feed products. General guidelines fordetermination of nitrogen by Kjeldahl method


ISBN 978 0 580 56149 8


AW/-/3

BS ISO 2563:2009Aircraft ducting and piping. Profile dimensionsfor flanges of V-band couplings

supersedes BS C 18:1976

ISBN 978 0 580 62062 1


ACE/69

BS ISO 4378:—Plain bearings. Terms, definitions, classificationand symbols

BS ISO 4378-1:2009Design, bearing materials and their properties


ISBN 978 0 580 58211 0


MCE/12

BS ISO 4378-2:2009Friction and wear


ISBN 978 0 580 58212 7


MCE/12

BS ISO 4378-3:2009Lubrication


ISBN 978 0 580 58213 4


MCE/12

BS ISO 4378-4:2009Basic symbols


ISBN 978 0 580 58567 8


MCE/12

BS EN ISO 23275:—Animal and vegetable fats and oils. Cocoabutter equivalents in cocoa butter and plainchocolate

BS EN ISO 23275-2:2008Quantification of cocoa butter equivalents

AW/307

Implementation of European Standard

EN ISO 23275-2 by amendment to BS ISO 23275-

2:2006

BS EN ISO 26945:2008Metallic and other inorganic coatings.Electrodeposited coatings of tin-cobalt alloy

STI/33

Implementation of European Standard EN ISO 26945

by amendment to BS ISO 26945:2008

BS EN ISO 27107:2008Animal and vegetable fats and oils.Determination of peroxide value.Potentiometric end-point determination

AW/307



BS IMPLEMENTATIONS

BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.

Note: The date referenced in theidentifier is the date of the internationalstandard.

BS ISO 96:—Textile machinery and accessories. Rings andtravellers for ring spinning and ring twistingframes

BS ISO 96-1:2009Flange rings T and SF and their travellers


ISBN 978 0 580 56361 4


TCI/33

BS ISO 96-2:2009HZ- and J-rings and their travellers


ISBN 978 0 580 56362 1


TCI/33

BS ISO 366:—Textile machinery and accessories. Reeds

BS ISO 366-2:2009Dimensions and designation of metal reedswith plate baulk


ISBN 978 0 580 57692 8


TCI/33

BS ENs IMPLEMENTED BYAMENDMENT

For the standards listed below see alsothe “Amendments to British Standards”and “Updated British Standards” sectionsof this issue of Update Standards.

BS EN ISO 844:2009Rigid cellular plastics. Determination ofcompression properties

PRI/24



BS EN ISO 2080:2009Metallic and other inorganic coatings. Surfacetreatment, metallic and other inorganiccoatings. Vocabulary

STI/33



BS EN ISO 7539:—Corrosion of metals and alloys. Stress corrosiontesting

BS EN ISO 7539-8:2008Preparation and use of specimens to evaluateweldments

ISE/NFE/8

Implementation of European Standard EN ISO 7539-8

by amendment to BS ISO 7539-8:2000

BS EN ISO 7539-9:2008Preparation and use of pre-cracked specimensfor tests under rising load or risingdisplacement

ISE/NFE/8

Implementation of European Standard EN ISO 7539-9

by amendment to BS ISO 7539-9:2003

BS EN ISO 8936:2009Awnings for leisure accommodation vehicles.Requirements and test methods

SW/136



BS EN ISO 14183:2008Animal feeding stuffs. Determination ofmonensin, narasin and salinomycin contents.Liquid chromatographic method using post-column derivatization

AW/10



BS EN ISO 15303:2008Animal and vegetable fats and oils. Detectionand identification of a volatile organiccontaminant by GC/MS

AW/307



BS ENs Implemented by Amendment


BS ISO 17338:2009Ships and marine technology. Drawings for fireprotection. Indications of fire rating by divisionsfor ships and high-speed craft


ISBN 978 0 580 54007 3


SME/32/-/1

BS ISO 18352:2009Carbon-fibre-reinforced plastics. Determinationof compression-after-impact properties at aspecified impact-energy level


ISBN 978 0 580 61323 4


PRI/42

BS ISO 18857:—Water quality. Determination of selectedalkylphenols

BS ISO 18857-2:2009Gas chromatographic-mass spectrometricdetermination of alkylphenols, their ethoxylatesand bisphenol A in non-filtered samplesfollowing solid-phase extraction andderivatisation


ISBN 978 0 580 57518 1


EH/3/2

BS ISO 19144:—Geographic information. Classification systems

BS ISO 19144-1:2009Classification systems structure


ISBN 978 0 580 61293 0


IST/36

BS ISO/IEC 19757:—Information technology. Document schemadefinition languages (DSDL)

BS ISO/IEC 19757-9:2008Namespace and datatype declaration indocument type definitions (DTDs)


ISBN 978 0 580 54617 4


IST/41

BS ISO 27956:2009Road vehicles. Securing of cargo in deliveryvans. Requirements and test methods


ISBN 978 0 580 62792 7


AUE/7

BS ISO 8178:—

Reciprocating internal combustion engines.

Exhaust emission measurement

BS ISO 8178-1:2006Test-bed measurement of gaseous and

particulate exhaust emissions


ISBN 978 0 580 69194 2


MCE/14/-/3

BS ISO 10928:2009Plastics piping systems. Glass-reinforced

thermosetting plastics (GRP) pipes and fittings.

Methods for regression analysis and their use


ISBN 978 0 580 56668 4


PRI/88/2

BS ISO 10935:2009Microscopes. Interfacing connection type C


ISBN 978 0 580 64308 8


CPW/172/5

BS ISO 10957:2009

Information and documentation. International

standard music number (ISMN)


ISBN 978 0 580 57390 3


IDT/2/18

BS ISO 11506:2009

Document management applications. Archiving

of electronic data. Computer output microform

(COM)/Computer output laser disc (COLD)


ISBN 978 0 580 60813 1


IDT/1/1

BS ISO/IEC 13250:—

Information technology. Topic maps

BS ISO/IEC 13250-4:2009

Canonicalization


ISBN 978 0 580 54609 9


IST/41

BS ISO/IEC 14443:—

Identification cards. Contactless integrated

circuit cards. Proximity cards

BS ISO/IEC 14443-1:2008

Physical characteristics

supersedes BS ISO/IEC 14443-1:2000

ISBN 978 0 580 58484 8


IST/17

BS ISO 4378-5:2009Application of symbols


ISBN 978 0 580 58568 5


MCE/12

BS ISO 4720:2009Essential oils. Nomenclature

supersedes BS ISO 4720:1992

ISBN 978 0 580 55934 1


AW/54

BS ISO 6469:—Electrically propelled road vehicles. Safetyspecifications

BS ISO 6469-1:2009On-board rechargeable energy storage system(RESS)


ISBN 978 0 580 63289 1


PEL/69

BS ISO 6469-2:2009Vehicle operational safety means andprotection against failures


ISBN 978 0 580 63290 7


PEL/69

BS ISO/IEC 7810:2003Identification cards. Physical characteristics


ISBN 978 0 580 67980 3


IST/17

BS ISO/IEC 7811:—Identification cards. Recording technique

BS ISO/IEC 7811-1:2002Embossing


ISBN 978 0 580 67981 0


IST/17

BS ISO 8082:—Self-propelled machinery for forestry.Laboratory tests and performance requirementsfor roll-over protective structures

BS ISO 8082-1:2009General machines

supersedes BS ISO 8082:2003

ISBN 978 0 580 65801 3


AGE/29


DD IEC/PAS 62633:2009Industrial communication networks. Profiles.Additional Fieldbus profiles for real-timenetworks based on ISO/IEC 8802-3. SNpTYPE


ISBN 978 0 580 68883 6


AMT/7

PUBLICLY AVAILABLESPECIFICATIONS

Publicly Available Specifications (formerlyProduct Assessment Specifications) areissued to provide an interim documentwhere there is a market need but wherea full British or European Standard hasyet to be published.

PAS 82:2009Shopfitting management system specification

supersedes PAS 82:2007

ISBN 978 0 580 67273 6


SPECIALIST BOOKS FROMBSI

BIP 2155:2009The Essential Guide to Technical ProductSpecification: Engineering Drawing


ISBN 978 0 580 62673 9


BIP 2187:2009Energy Management Principles and Practice: ACompanion to BS EN 16001:2009


ISBN 978 0 580 67659 8


KITS, SETS, PACKS ANDSERIES

KIT 203European Pressure Vessels


ISBN 978 0 580 50982 7


Special offer. Includes BS EN 13445 Parts 1 to 6

KIT 204European Pressure Vessels


ISBN 978 0 580 50983 4


Special offer. Includes BS EN 13445 Parts 1-6 and

Part 8

PD ISO/TR 9241-309:2008Organic light-emitting diode (OLED) displays


ISBN 978 0 580 65477 0


PH/9

PD ISO/TR 10064:—Code of inspection practice

PD ISO/TR 10064-6:2009Bevel gear measurement methods


ISBN 978 0 580 60118 7


MCE/5/-/2

PD ISO/IEC TR 15446:2009Information technology. Security techniques.Guide for the production of protection profilesand security targets

supersedes PD ISO/IEC TR 15446:2004

ISBN 978 0 580 56212 9


IST/33

PD CEN/TR 15840:2009Evaluation of conformity of fly ash for concrete.Guidelines for the application of EN 450-2


ISBN 978 0 580 63108 5


B/517

PD IEC/TR 60919:—Performance of high-voltage direct current(HVDC) systems with line-commutatedconverters

PD IEC/TR 60919-2:2008Faults and switching


ISBN 978 0 580 58094 9


PEL/22

PD IEC/TR 62343:—Dynamic modules

PD IEC/TR 62343-6-2:2009Software and hardware interfaces. Surveyresults


ISBN 978 0 580 67293 4


GEL/86/3

DRAFTS FOR DEVELOPMENT

DD IEC/PAS 61784:—Industrial communication networks. Profiles

DD IEC/PAS 61784-3-18:2009Functional safety fieldbuses. Additionalspecifications for CPF SNpFAMILY


ISBN 978 0 580 68884 3


AMT/7

BS ISO/IEC 29109:—Information technology. Conformance testingmethodology for biometric data interchangeformats defined in ISO/IEC 19794

BS ISO/IEC 29109-1:2009Generalized conformance testing methodology


ISBN 978 0 580 61456 9


IST/44

BS ISO/IEC 29794:—Information technology. Biometric samplequality

BS ISO/IEC 29794-1:2009Framework


ISBN 978 0 580 56527 4


IST/44

BS IEC 60988:2009Nuclear power plants. Instrumentationimportant to safety. Acoustic monitoringsystems for detection of loose parts:Characteristics, design criteria and operationalprocedures


ISBN 978 0 580 55527 5


NCE/8

BS IEC 61226:2009Nuclear power plants. Instrumentation andcontrol important to safety. Classification ofinstrumentation and control functions

supersedes BS IEC 61226:2005

ISBN 978 0 580 63322 5


NCE/8

BS IEC 61559:—Radiation protection instrumentation in nuclearfacilities. Centralized systems for continuousmonitoring of radiation and/or levels ofradioactivity

BS IEC 61559-1:2009General requirements


ISBN 978 0 580 68868 3


NCE/2

PUBLISHED DOCUMENTS

PD ISO/TR 9241:—Ergonomics of human-system interaction

PD ISO/TR 9241-308:2008Surface-conduction electron-emitter displays(SED)


ISBN 978 0 580 57859 5


PH/9

BS Implementations continued...


BS EN 12844:1998Zinc and zinc alloys. Castings. Specifications

CORRIGENDUM 1

NFE/8

BS EN ISO 13704:2007Petroleum, petrochemical and natural gasindustries. Calculation of heater-tube thicknessin petroleum refineries

CORRIGENDUM 1

PSE/17/-/6

BS EN ISO 14183:2008

(BS ISO 14183:2005)Animal feeding stuffs. Determination ofmonensin, narasin and salinomycin contents.Liquid chromatographic method using post-column derivatization

CORRIGENDUM 1

AW/10

BS EN 15170:2008Characterization of sludges. Determination ofcalorific value

CORRIGENDUM 1

EH/5

BS EN ISO 15303:2008

(BS ISO 15303:2001)Animal and vegetable fats and oils. Detectionand identification of a volatile organiccontaminant by GC/MS

CORRIGENDUM 1

AW/307

BS EN 15428:2007Soil improvers and growing media.Determination of particle size distribution

CORRIGENDUM 1

AW/20

BS EN ISO 23275:—Animal and vegetable fats and oils. Cocoabutter equivalents in cocoa butter and plainchocolate

BS EN ISO 23275-2:2008

(BS ISO 23275-2:2006)Quantification of cocoa butter equivalents

CORRIGENDUM 1

AW/307

BS EN ISO 26945:2008

(BS ISO 26945:2008)Metallic and other inorganic coatings.Electrodeposited coatings of tin-cobalt alloy

CORRIGENDUM 1

STI/33

BS EN ISO 27107:2008

(BS ISO 27107:2008)Animal and vegetable fats and oils.Determination of peroxide value.Potentiometric end-point determination

CORRIGENDUM 1

AW/307

BS EN ISO 844:2009

(BS ISO 844:2007)Rigid cellular plastics. Determination ofcompression properties

CORRIGENDUM 1

PRI/24

BS EN ISO 2080:2009

(BS ISO 2080:2008)Metallic and other inorganic coatings. Surfacetreatment, metallic and other inorganiccoatings. Vocabulary

CORRIGENDUM 1

STI/33

BS EN ISO 7539:—Corrosion of metals and alloys. Stress corrosiontesting

BS EN ISO 7539-8:2008

(BS ISO 7539-8:2000)Preparation and use of specimens to evaluateweldments

CORRIGENDUM 1

ISE/NFE/8

BS EN ISO 7539-9:2008

(BS ISO 7539-9:2003)Preparation and use of pre-cracked specimensfor tests under rising load or risingdisplacement

CORRIGENDUM 1

ISE/NFE/8

BS EN ISO 8936:2009

(BS ISO 8936:2007)Awnings for leisure accommodation vehicles.Requirements and test methods

CORRIGENDUM 1

SW/136

BS EN ISO 10548:2003Carbon fibre. Determination of size content

CORRIGENDUM 1

PRI/42

BS EN ISO 11290:—Microbiology of food and animal feeding stuffs.Horizontal method for the detection andenumeration of Listeria monocytogenes

BS EN ISO 11290-1:1996+A1:2004

(BS 5763-18:1997)Detection method

CORRIGENDUM 1

AW/9

Also incorporates Amendment 1

BS EN ISO 11290-2:1998+A1:2004Enumeration method

CORRIGENDUM 1

AW/9


BS EN 12613:2009Plastics warning devices for underground cablesand pipelines with visual characteristics

CORRIGENDUM 1

PRI/88

CORRIGENDA TO BRITISHSTANDARDS

Most amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is reissued (see‘Updated British Standards’). BritishStandards which have been corrected viacorrigenda are available on request, freeof charge to past purchasers of thestandard. All amendments and corrigendato date of despatch are included withinany main publication when ordered forthe first time.

The following corrigenda to BritishStandards were made available lastmonth.

BS 919:—Screw gauge limits and tolerances

BS 919-1:2007Specification for gauges for screw threads ofunified form

CORRIGENDUM 1

TDW/4

BS 919-2:2007Specification for gauges for screw threads ofWhitworth and B.A. forms

CORRIGENDUM 1

TDW/4

BS 919-3:2007Specification for gauges for screw threads ofISO metric form

CORRIGENDUM 1

TDW/4

BS 919-4:2007Limits of size for gauges for screw threads ofunified form diameters 1⁄4 in and larger

CORRIGENDUM 1

TDW/4

BS 1044:—Specification for gauge blanks

BS 1044-1:2008Plug, ring and calliper gauges

CORRIGENDUM 1

TDW/4

BS 7272:—Writing and marking instruments

BS 7272-2:2008Specification for end closures to reduce the riskof asphyxiation

CORRIGENDUM 1

TDW/4/-/2


BS ISO 26021:—Road vehicles. End of-life activation of on-boardpyrotechnic devices

BS ISO 26021-2:2008Communication requirements

CORRIGENDUM 1

AUE/16

BS Z 17:2000Space data and information transfer systems.Data systems. Lossless data compression

CORRIGENDUM 1

ACE/68/-/7

UPDATED BRITISHSTANDARDS

The following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.

NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.

BS 3621:2007+A1:2009Thief resistant lock assembly. Key egress

AMENDMENT 1


B/538/4

BS 4825:—Stainless steel tubes and fittings for the foodindustry and other hygienic applications

BS 4825-1:1991+A2:2009Specification for tubes

AMENDMENT 2


ISE/8


BS 4825-2:1991+A2:2009Specification for bends and tees

AMENDMENT 2


ISE/8


BS 6465:—Sanitary installations

BS 6465-1:2006+A1:2009Code of practice for the design of sanitaryfacilities and scales of provision of sanitary andassociated appliances

AMENDMENT 1


B/209

BS 7188:1998+A2:2009Impact absorbing playground surfacing.Performance requirements and test methods

AMENDMENT 2


SW/65


BS 7533:—Pavements constructed with clay, natural stoneor concrete pavers

BS 7533-3:2005+A1:2009Code of practice for laying precast concretepaving blocks and clay pavers for flexiblepavements

AMENDMENT 1


B/507

BS 8204:—Screeds, bases and in situ floorings

BS 8204-1:2003+A1:2009Concrete bases and cementitious levellingscreeds to receive floorings. Code of practice

AMENDMENT 1


B/507/6

BS 8204-2:2003+A1:2009Concrete wearing surfaces. Code of practice

AMENDMENT 1


B/507/6

BS 8204-3:2004+A1:2009Polymer modified cementitious levelling screedsand wearing screeds. Code of practice

AMENDMENT 1


B/507/6

BS 8621:2007+A1:2009Thief resistant lock assembly. Keyless egress

AMENDMENT 1


B/538/4

BS 10621:2007+A1:2009Thief resistant dual-mode lock assembly

AMENDMENT 1


B/538/4

BS EN 71:—Safety of toys

BS EN 71-5:1993+A2:2009

(BS 5665-5:1993)Chemical toys (sets) other than experimentalsets

AMENDMENT 2


CW/15


BS EN 60730:—Automatic electrical controls for household andsimilar use

BS EN 60730-2-11:2008Particular requirements for energy regulators

CORRIGENDUM 1

CPL/72

BS EN 61000:—Electromagnetic compatibility (EMC)

BS EN 61000-3-3:1995+A2:2005Limits. Limitation of voltage changes, voltagefluctuations and flicker in public low-voltagesupply systems, for equipment with ratedcurrent ≤ 16 A per phase and not subject toconditional connection

CORRIGENDUM 1

GEL/210/12

Also incorporates Amendments 1 & 2

BS EN 61000-4-3:2006+A1:2008Testing and measurement techniques. Radiated,radio-frequency, electromagnetic field immunitytest

CORRIGENDUM 1

GEL/210/12


BS ISO 362:—Measurement of noise emitted by acceleratingroad vehicles. Engineering method

BS ISO 362-1:2007M and N categories

CORRIGENDUM 1

EH/1/2

BS ISO 6020:—Hydraulic fluid power. Mounting dimensions forsingle rod cylinders, 16 MPa (160 bar) series

BS ISO 6020-2:2006Compact series

CORRIGENDUM 1

MCE/18/-/3

BS ISO 14695:2003

(BS 848-6:2003)Industrial fans. Method of measurement of fanvibration

CORRIGENDUM 1

MCE/17

BS ISO/IEC 15946:—Information technology. Security techniques.Cryptographic techniques based on ellipticcurves

BS ISO/IEC 15946-1:2008General

CORRIGENDUM 1

IST/33

BS ISO/IEC 18031:2005Information technology. Security techniques.Random bit generation

CORRIGENDUM 1

IST/33

Corrigenda to British Standards continued...


To order visit


BS EN 12470:—Clinical thermometers

BS EN 12470-4:2000+A1:2009Performance of electrical thermometers forcontinuous measurement

AMENDMENT 1


LBI/36/3

BS EN 12717:2001+A1:2009Safety of machine tools. Drilling machines

AMENDMENT 1


MTE/1

BS EN ISO 12866:1999+A1:2008Ophthalmic instruments. Perimeters

AMENDMENT 1


CH/172/6

BS EN 12978:2003+A1:2009Industrial, commercial and garage doors andgates. Safety devices for power operated doorsand gates. Requirements and test methods

AMENDMENT 1


B/538/5

BS EN 13118:2000+A1:2009Agricultural machinery. Potato harvestingequipment. Safety

AMENDMENT 1


AGE/32

BS EN 13384:—Chimneys. Thermal and fluid dynamiccalculation methods

BS EN 13384-1:2002+A2:2008Chimneys serving one appliance

AMENDMENT 2


B/506


BS EN 13480:—Metallic industrial piping

BS EN 13480-1:2002+A2:2008General

AMENDMENT 2


PVE/10


BS EN 13736:2003+A1:2009Safety of machine tools. Pneumatic presses

AMENDMENT 1


MTE/1

BS EN 1677:—Components for slings. Safety

BS EN 1677-2:2000+A1:2008Forged steel lifting hooks with latch, Grade 8

AMENDMENT 1


MHE/1

BS EN ISO 3822:—Acoustics. Laboratory tests on noise emissionfrom appliances and equipment used in watersupply installations

BS EN ISO 3822-1:1999+A1:2008Method of measurement

AMENDMENT 1


EH/1/6

BS EN ISO 7711:—Dental rotary instruments. Diamondinstruments

BS EN ISO 7711-1:1998+A1:2009Dimensions, requirements, marking andpackaging

AMENDMENT 1


CH/106/4

BS EN 12111:2002+A1:2009Tunnelling machines. Road headers, continuousminers and impact rippers. Safety requirements

AMENDMENT 1


B/513

Also incorporates Corrigendum 1

BS EN 12159:2000+A1:2009Builders hoists for persons and materials withvertically guided cages

AMENDMENT 1


MHE/6

BS EN ISO 12217:—Small craft. Stability and buoyancy assessmentand categorization

BS EN ISO 12217-3:2002+A1:2009Boats of hull length less than 6 m

AMENDMENT 1


GME/33

BS EN 12385:—Steel wire ropes. Safety

BS EN 12385-1:2002+A1:2008General requirements

AMENDMENT 1


MHE/2


BS EN 415:—Packaging machines safety

BS EN 415-1:2000+A1:2009Terminology and classification of packagingmachines and associated equipment

AMENDMENT 1


MCE/3/3

BS EN 500:—Mobile road construction machinery. Safety

BS EN 500-6:2006+A1:2008Specific requirements for paver-finishers

AMENDMENT 1


B/513/1

BS EN 614:—Safety of machinery. Ergonomic designprinciples

BS EN 614-1:2006+A1:2009Terminology and general principles

AMENDMENT 1


PH/9

BS EN 704:1999+A1:2009Agricultural machinery. Pick-up balers. Safety

AMENDMENT 1


AGE/32

BS EN 745:1999+A1:2009Agricultural machinery. Rotary mowers andflail-mowers. Safety

AMENDMENT 1


AGE/32

BS EN 908:1999+A1:2009Agricultural and forestry machinery. Reelmachines for irrigation. Safety

AMENDMENT 1


AGE/30

BS EN 909:1998+A1:2009Agricultural and forestry machinery. Centrepivot and moving lateral types irrigationmachines. Safety

AMENDMENT 1


AGE/30

BS EN 1570:1998+A2:2009Safety requirements for lifting tables

AMENDMENT 2


MHE/12/-/2



BS EN 61558:—Safety of power transformers, power supplies,reactors and similar products

BS EN 61558-1:2005+A1:2009General requirements and tests

AMENDMENT 1


PEL/96


BS EN 61676:2002+A1:2009Medical electrical equipment. Dosimetricinstruments used for non-invasive measurementof X-ray tube voltage in diagnostic radiology

AMENDMENT 1


CH/62/3

BS ISO 2930:1995+A1:2008Rubber, raw natural. Determination of plasticityretention index (PRI)

AMENDMENT 1


PRI/50

BS ISO 4387:2000+A1:2008Cigarettes. Determination of total and nicotine-free dry particulate matter using a routineanalytical smoking machine

AMENDMENT 1


AW/40

BS ISO/IEC 7816:—Identification cards. Integrated circuit cards

BS ISO/IEC 7816-15:2004+A2:2008Cryptographic information application

AMENDMENT 2


IST/17


BS ISO/IEC 9541:—Information technology. Font informationinterchange

BS ISO/IEC 9541-2:1991+A2:2009Interchange format

AMENDMENT 2


IST/41

Also incorporates Amendment 1 and Corrigenda 1

& 2

PD 5500:2009+A1:2009Specification for unfired fusion welded pressurevessels

AMENDMENT 1

£900.00 members, £1,800.00 non-members

PVE/1

BS EN 60745-2-2:2003+A1:2009Particular requirements for screwdrivers andimpact wrenches

AMENDMENT 1


CPL/116


BS EN 60745-2-12:2003+A1:2009Particular requirements for concrete vibrators

AMENDMENT 1


CPL/116

BS EN 60747:—Semiconductor devices

BS EN 60747-16-3:2002+A1:2009Microwave integrated circuits. Frequencyconverters

AMENDMENT 1


EPL/47

BS EN 60947:—Low-voltage switchgear and controlgear

BS EN 60947-5-1:2004+A1:2009Control/circuit devices and switching elements.Electromechanical control circuit devices

AMENDMENT 1


PEL/17/2


BS EN 61000:—Electromagnetic compatibility (EMC)

BS EN 61000-3-2:2006+A2:2009Limits. Limits for harmonic current emissions(equipment input current ≤ 16 A per phase)

AMENDMENT 2


GEL/210/12


BS EN 61204:—Low-voltage power supplies, D.C. output

BS EN 61204-7:2006Safety requirements

AMENDMENT 11


PEL/22

BS EN 61496:—Safety of machinery. Electro-sensitive protectiveequipment

BS EN 61496-1:2004+A1:2008General requirements and tests

AMENDMENT 1


MCE/3

BS EN 13898:2003+A1:2009Machine tools. Safety. Sawing machines for coldmetal

AMENDMENT 1


MTE/1

BS EN 14710:—Fire-fighting pumps. Fire-fighting centrifugalpumps without primer

BS EN 14710-1:2005+A2:2008Classification, general and safety requirements

AMENDMENT 2


FSH/17


BS EN ISO 16588:2003+A1:2005

(BS 6068-2.82:2003)Water quality. Determination of six complexingagents. Gas-chromatographic method

AMENDMENT 1


EH/3/2

BS EN 60099:—Surge arresters

BS EN 60099-4:2004+A2:2009Metal-oxide surge arresters without gaps forA.C. systems

AMENDMENT 2


PEL/37


BS EN 60264:—Packaging of winding wires

BS EN 60264-1:1994+A1:2009Containers for round winding wires

AMENDMENT 1


GEL/55

BS EN 60286:—Packaging of components for automatichandling

BS EN 60286-5:2004+A1:2009Matrix trays

AMENDMENT 1


EPL/40X

BS EN 60745:—Hand-held motor-operated electric tools. Safety

BS EN 60745-2-1:2003+A1:2009Particular requirements for drills and impactdrills

AMENDMENT 1


CPL/116


Updated British Standards continued...


SPECIAL ANNOUNCEMENTS

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

New European standardization work in

Innovation management

The EU considers innovation as a key issue inorder to maintain European competitiveness inthe global market. CEN also considersinnovation as a key objective and a newtechnical committee (CEN/TC 389) has beencreated with a view to developing pan-European standards in the field of Innovationmanagement.

Work is anticipated in the following areas:1. Collaboration and creativity management2. Technology watch and IPR management3. Innovation management assessment4. Innovation management and related support

services5. Innovation management processes6. Innovation management system

BSI will be fielding experts in each of the areasand would like to hear from trade associationsor relevant stakeholders who would like to beinvolved in the development work of eachgroup. Please contact the Programme Manager(below) to register your interest.

Contact: Piera Johnson

Email: [email protected]

IMS/1

BS 2000:—Methods of test for petroleum and its products

BS 2000-0.1:1999General introduction. Specifications. IP standardfor thermometers

BS 2000-10:1995Determination of kerosine burningcharacteristics. 24 hour method

BS 2000-12:1993Determination of specific energy

BS 2000-48:1997Determination of oxidation characteristics oflubricating oil

BS 2000-137:1993Determination of oil content of water mixmetalworking oil dilutions

BS 2000-213:1993Determination of neutralization value ofbitumen. Colour indicator titration method

BS 2000-223:1993Determination of ash of petroleum productscontaining mineral matter

BS 4521:—Specification for railway turnouts for privateusers

BS 4521-1:—Turnouts over which British Railwayslocomotives operate

BS 4521-1.1:1971Turnouts using bull head rails

RAE/2

BS 4521-1.2:1971Turnouts using flat bottom rail

RAE/2

BS 4521-2:1975Light grade turnouts over which BritishRailways locomotives do not operate, for axleloads not exceeding 10 tons, using flat bottomrails

RAE/2

BS 4521-3:—Medium grade turnouts over which BritishRailways locomotives do not operate, for axleloads not exceeding 25 tons

BS 4521-3.1:1974Turnouts using bull head rail

RAE/2

BS 4521-3.2:1975Turnouts using flat bottom rails

RAE/2

BS 4521-4:1975Heavy grade turnouts over which BritishRailways locomotives do not operate, for axleloads which may exceed 25 tons, using flatbottom rails

RAE/2

BS 5892:—Railway rolling stock materials

BS 5892-2:1992Specification for forged and rolled wheelcentres

RAE/3/-/1

BS 5892-3:1992+A2:2009Specification for monobloc wheels for tractionand trailing stock

RAE/3/-/1

BS 5892-4:1992Specification for forged and rolled tyres

RAE/3/-/1

BS 5892-6:1992Specification for wheelsets for traction andtrailing stock

RAE/3/-/1

BS 7865:1997Specification for steel electrical conductor railfor railway motive power supply

RAE/2

BS 2000-455:2001Determination of manganese in gasoline.Atomic absorption spectrometry (AAS) method

BS 2000-491:2002Determination of flash/no flash. Closed cupequilibrium method

BS 2000-492:2002Determination of flash point. Closed cupequilibrium method

These standards, jointly published by BSI andThe Energy Institute, have been updatededitorially with minor technical changes toimprove consistency.

For BS EN ISO 1516:2002, BS 2000-491:2002 andBS EN ISO 1523:2002, BS 2000-492:2002 thecorrections include supersession of the STI/10standards BS 3900-A8:1986 (BS 6664-1:1986,ISO 1516-1981) and BS 3900-A9:1986 (BS 6664-2:1986, ISO 1523-1983) respectively.

Copies of the proposed texts are available from the Programme Manager (below) towhom any comments should be returned by 31 December, 2009.

Contact: Bernard Shelley


PTI/13

BRITISH STANDARDSPROPOSED FORCONFIRMATION

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Circumstances may lead to an earlierreview.

Confirmation indicates the continuingcurrency of a standard.

A note of any objections to the proposalsbelow should be sent to Debbie Stead,Head of Committee Service Centre –Operations, BSI Head Office, 389 ChiswickHigh Road, London W4 4AL or via emailto [email protected] 31 December, 2009.

BS 47:—Fishplates for railway rails

BS 47-1:1991Specification for rolled steel fishplates

RAE/2

BS 64:1992Specification for normal and high strength steelbolts and nuts for railway rail fishplates

RAE/2


BS 4285:—Microbiological examination for dairy purposes

BS 4285-3.15:1993Methods for detection and/or enumeration ofspecific groups of microorganisms. Detection ofListeria monocytogenes

AW/9

Superseded by the dual numbered standards

BS EN ISO 11290-1:1996+A1:2004, BS 5763-

18:1997 and BS EN ISO 11290-2:1998+A1:2004

BS 4500:—ISO limits and fits

BS 4500-4:1985Specification for system of cone (taper) fits forcones from C = 1:3 to 1:500, lengths from 6 mmto 630 mm and diameters up to 500 mm

TDW/4

Superseded by BS 4500:2009

BS 4500-5:1988Specification for system of cone tolerances forconical workpieces from C = 1:3 to 1:500 andlengths from 6 mm to 630 mm

TDW/4

Superseded by BS 4500:2009

BS 4987:—Coated macadam (asphalt concrete) for roadsand other paved areas

BS 4987-1:2005Specification for constituent materials and formixtures

B/510/1

BS 4987-1:2005 has been superseded by

BS EN 13108-1:2006 and BS EN 13108-7:2006. This

was not recognized by the committee at the time of

publication. The National Forewords of

BS EN 13108-1:2006 and BS EN 13108-7:2006 are

being corrected to show the supersession details

BS 5400:—Steel, concrete and composite bridges

BS 5400-9:—Bridge bearings

BS 5400-9.1:1983Code of practice for design of bridge bearings

B/522

Superseded by BS EN 1337-2:2004, BS EN 1337-

3:2005, BS EN 1337-4:2004, BS EN 1337-5:2005,

BS EN 1337-6:2004, BS EN 1337-7:2004 and

BS EN 1337-8:2007

BS 5400-9.2:1983Specification for materials, manufacture andinstallation of bridge bearings

B/522

Superseded by BS EN 1337-2:2004, BS EN 1337-

3:2005, BS EN 1337-5:2005, BS EN 1337-7:2004

and BS EN 1337-8:2007

BS 7012:—Light microscopes

BS 7012-9:1997Specification for interfacing connection type C

CPW/172/5

Superseded by BS ISO 10935:2009

BRITISH STANDARDSPROPOSED FORWITHDRAWAL

A note of any objections to thesewithdrawals should be sent to DebbieStead, Head of Committee Service Centre– Operations, BSI Head Office, 389Chiswick High Road, London W4 4AL orvia email [email protected] by31 December, 2009.

Where any standard in this list has beenamended since publication, a proposal towithdraw also includes all amendmentspublished to date.

BS 9090:1977Variable capacitors of assessed quality: genericdata and methods of test

EPL/40X

This standard was partially superseded by

BS EN 134000:1995. The clauses which remained

current are no longer considered relevant and are

now proposed for withdrawal

BRITISH STANDARDSWITHDRAWN

If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn

BS 594:—Hot rolled asphalt for roads and other pavedareas

BS 594-1:2005Specification for constituent materials andasphalt mixtures

B/510/1

BS 594-1:2005 has been superseded by

BS EN 13108-4:2006. This was not recognized by

the committee at the time of publication. The

National Foreword of BS EN 13108-4:2006 is being

corrected to show the supersession details

BRITISH STANDARDSREVIEWED ANDCONFIRMED

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Confirmation indicates the continuingcurrency of a standard.

Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.

BS 5752:—Methods of test for coffee and coffee products

BS 5752-3:1983Coffee: determination of caffeine content(reference method)

AW/15

BS 5752-11:1987Instant coffee: determination of free-flow andcompacted bulk densities

AW/15

BS ISO 3086:2006Iron ores. Experimental methods for checkingthe bias of sampling

ISE/58

BS ISO 4149:2005Green coffee. Olfactory and visual examinationand determination of foreign matter anddefects

AW/15

BS ISO 6670:2002Instant coffee. Sampling method for bulk unitswith liners

AW/15

BS ISO 6673:2003Green coffee. Determination of loss in mass at105°C

AW/15

BS ISO 9116:2004Green coffee. Guidelines on methods ofspecification

AW/15

BS ISO 12132:1999Plain bearings. Quality assurance of thin-walledhalf bearings. Design FMEA

MCE/12

BS ISO 13778:1999Plain bearings. Quality assurance of thin-walledhalf bearings. Selective assembly of bearings toachieve a narrow clearance range

MCE/12

BS ISO 22309:2006Microbeam analysis. Quantitative analysis usingenergy-dispersive spectrometry (EDS)

CII/9

British Standards Reviewed and Confirmed


Help Us to Help

You!

Always quote your Customer Number

Don’t know your

number?

Contact

Customer Services

020 8996 9001

who will be happy to check it for you

BS ISO 8082:2003Self-propelled machinery for forestry. Roll-overprotective structures. Laboratory tests andperformance requirements

AGE/29

Superseded by BS ISO 8082-1:2009

BS ISO 8131:1992Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Tolerances

MCE/18


BS ISO 8257:—Plastics. Poly(methyl methacrylate) (PMMA)moulding and extrusion materials

BS ISO 8257-1:1987Designation

PRI/82

Superseded by BS EN ISO 8257-1:2006

DD IEC TS 60034:—Rotating electrical machines

DD IEC TS 60034-26:2002Effects of unbalanced voltages on theperformance of three-phase induction motors

PEL/2

Superseded by BS EN 60034-26:2006

BS C 18:1976Specification for V-flange couplings for aircraftpiping and ducting. Metric series

ACE/12

Superseded by BS ISO 2563:2009

BRITISH STANDARDS UNDERREVIEW

The following British Standardsimplement International and/or EuropeanStandards which are currently underreview to see if they should be confirmed,revised or withdrawn.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL or via email [email protected] by31 December, 2009, in order to beconsidered by the relevantUK Committee.

BS EN 47:2005Wood preservatives. Determination of the toxicvalues against larvae of Hylotrupes bajulus(Linnaeus). (Laboratory method)

B/515

BS EN 48:2005Wood preservatives. Determination of eradicantaction against larvae of Anobium punctatum(De Geer) (laboratory method)

B/515

BS EN 13918:2003Gas welding equipment. Integrated flowmeterregulators used on cylinders for welding,cutting and allied processes. Classification,specification and tests

WEE/18

Superseded by BS EN ISO 2503:2009

BS EN 14295:2003Welding consumables. Wire and tubular coredelectrodes and electrode-flux combinations forsubmerged arc welding of high strength steels.Classification

WEE/39


BS EN 55011:1998Limits and methods of measurement of radiodisturbance characteristics of industrial,scientific and medical (ISM) radio-frequencyequipment

GEL/210/11

Superseded by BS EN 55011:2007

BS EN 55016:—Specification for radio disturbance andimmunity measuring apparatus and methods

BS EN 55016-2-3:2004Methods of measurement of disturbances andimmunity. Radiated disturbance measurements

GEL/210/12

Superseded by BS EN 55016-2-3:2006

BS EN 60309:—Plugs, socket-outlets and couplers for industrialpurposes

BS EN 60309-2:1998Dimensional interchangeability requirementsfor pin and contact-tube accessories

PEL/23/4


BS EN 60745:—Hand-held motor-operated electric tools. Safety

BS EN 60745-2-5:2003Particular requirements for circular saws

CPL/61/6

Superseded by BS EN 60745-2-5:2007

BS EN 61199:1994Single-capped fluorescent lamps. Safetyspecifications

CPL/34/1


BS EN 61937:—Digital audio. Interface for non-linear PCMencoded audio bitstreams applying IEC 60958

BS EN 61937-5:2002Non-linear PCM bitstreams according to theDTS (Digital Theater Systems) format(s)

EPL/100


BS EN 500:—Mobile road construction machinery. Safety

BS EN 500-2:2006Specific requirements for road-milling

B/513/1

Superseded by BS EN 500-2:2006+A1:2008

BS EN 500-3:2006Specific requirements for soil-stabilizing

B/513/1


BS EN 500-4:2006Specific requirements for compaction

B/513/1


BS EN ISO 8178:—Reciprocating internal combustion engines.Exhaust emission measurement

BS EN ISO 8178-1:1996Test-bed measurement of gaseous andparticulate exhaust emissions

MCE/14


BS EN 10291:2000Metallic materials. Uniaxial creep testing intension. Methods of test

ISE/NFE/4/1


BS EN 12336:2005Tunnelling machines. Shield machines, thrustboring machines, auger boring machines, liningerection equipment. Safety requirements

B/513

Superseded by BS EN 12336:2005+A1:2008

BS EN 12418:2000Masonry and stone cutting-off machines for jobsite. Safety

B/513


BS EN 12508:2000Corrosion protection of metals and alloys.Surface treatment, metallic and other inorganiccoatings. Vocabulary

STI/33


DD CEN/TS 13354:2003Solid wood panels. Bonding quality. Testmethod

B/541


BS EN 13531:2001

(BS 6912-25:2001)Earth-moving machinery. Tip-over protectionstructure (TOPS) for compact excavators.Laboratory tests and performance requirements

B/513/1



BS EN 14881:2005Surface active agents. Determination of N-(3-dimethylaminopropyl)-alkylamide content inalkylamidopropylbetaines. Gas chromatographicmethod

CII/34

DD CEN/TS 15082:2005Wood preservatives. Determination of thepreventive effectiveness against sapstain fungiand mould fungi on freshly sawn timber. Fieldtest

B/515

NEW WORK STARTED

The reference number of the committeeresponsible for each item of new workstarted is given after each entry.

Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.

BS XXXXXFinancial services compliance

SVS/6

BS 6213:2000/Amendment 1Selection of construction sealants. Guide

B/547

BS EN 1007:—Advanced technical ceramics. Ceramiccomposites. Methods of test for reinforcements

BS EN 1007-7Determination of the distribution of tensilestrength and of tensile strain to failure offilaments within a multifilament tow at hightemperature

RPI/13

BS EN 1537 (Revision)Execution of special geotechnical works.Ground anchors

will supersede BS EN 1537:2000

B/526

BS EN 1816 (Revision)Resilient floor coverings. Specification forhomogeneous and heterogeneous smoothrubber floor coverings with foam backing


PRI/3/60

BS EN 1817 (Revision)Resilient floor coverings. Specification forhomogeneous and heterogeneous smoothrubber floor coverings


PRI/3/60

BS EN 10230:—Steel wire nails

BS EN 10230-1:2000Loose nails for general applications

ISE/26

BS EN 10244:—Steel wire and wire products. Non-ferrousmetallic coatings on steel wire

BS EN 10244-3:2001Aluminium coatings

ISE/26

BS EN 10244-4:2001Tin coatings

ISE/26

BS EN 10244-5:2001Nickel coatings

ISE/26

BS EN 10244-6:2001Copper, bronze or brass coatings

ISE/26

BS EN 10306:2002Iron and steel. Ultrasonic testing of H beamswith parallel flanges and IPE beams

ISE/72

BS EN 10307:2001Non-destructive testing. Ultrasonic testing ofaustenitic and austentitic-ferritic stainless steelsflat products of thickness equal to or greaterthan 6 mm (reflection method)

ISE/72

BS EN 10308:2002Non-destructive testing. Ultrasonic testing ofsteel bars

ISE/72

BS EN 10323:2004Steel wire and products. Bead wire

ISE/26

BS EN 10324:2004Steel wire and wire products. Hosereinforcement wire

ISE/26

BS EN 10328:2005Iron and steel. Determination of theconventional depth and hardening after surfaceheating

ISE/72

BS EN 14880:2005Surface active agents. Determination ofinorganic sulfate content in anionic surfaceactive agents. Potentiometric lead selectiveelectrode titration method

CII/34

BS EN 49:—Wood preservatives. Determination of theprotective effectiveness against Anobiumpunctatum (De Geer) by egg-laying and larvalsurvival

BS EN 49-1:2005Application by surface treatment (laboratorymethod)

B/515

BS EN 49-2:2005Application by impregnation (laboratorymethod)

B/515

BS EN 117:2005Wood preservatives. Determination of toxicvalues against Reticulitermes species (Europeantermites) (laboratory method)

B/515

BS EN 118:2005Wood preservatives. Determination ofpreventive action against Reticulitermes species(European termites) (laboratory method)

B/515

BS EN ISO 642:1999Steel hardenability test by end quenching(Jominy test)

ISE/72

BS EN ISO 643:2003Steels. Micrographic determination of theapparent grain size

ISE/72

BS EN ISO 2639:2002Steels. Determination and verification of thedepth of carburized and hardened cases

ISE/72

BS EN ISO 3651:—Determination of resistance to intergranularcorrosion of stainless steels

BS EN ISO 3651-1:1998Austenitic and ferritic-austenitic (duplex)stainless steels. Corrosion test in nitric acidmedium by measurement of loss in mass (Huey test)

ISE/72

BS EN ISO 3651-2:1998Ferritic, austenitic and ferritic-austenitic(duplex) stainless steels. Corrosion test in mediacontaining sulfuric acid

ISE/72

BS EN ISO 3887:2003Steels. Determination of depth ofdecarburization

ISE/72

BS EN 10160:1999Ultrasonic testing of steel flat product ofthickness equal or greater than 6 mm(reflection method)

ISE/73/2

BS EN 10229:1998Evaluation of resistance of steel products tohydrogen induced cracking (HIC)

ISE/72

British Standards Under Review continued...


BS EN 14626 (Revision)Ambient air quality. Standard method for themeasurement of the concentration of carbonmonoxide by non dispersive infraredspectroscopy


EH/2/1

BS EN 14975:2006/Amendment 1Loft ladders. Requirements, marking andtesting

B/512

BS EN ISO 15302 (Revision)Animal and vegetable fats and oils.Determination of benzo[a]pyrene content.Reverse-phase high-performance liquidchromatography method

will supersede BS EN ISO 15302:2007

AW/307

BS EN 15365Advanced technical ceramics. Mechanicalproperties of ceramic fibres at hightemperature in a non-reactive environment.Determination of creep behaviour by the coldend method

RPI/13

DD CEN/TS 15401 (Revision)Solid recovered fuels. Methods for thedetermination of bulk density

will supersede DD CEN/TS 15401:2006

PTI/17

DD CEN/TS 15412 (Revision)Solid recovered fuels. Methods for thedetermination of metallic aluminium

will supersede DD CEN/TS 15412:2006

PTI/17

DD CEN/TS 15414:—Solid recovered fuels. Determination ofmoisture content using the oven dry method

DD CEN/TS 15414-1 (Revision)Determination of total moisture by a referencemethod

will supersede DD CEN/TS 15414-1:2006

PTI/17

DD CEN/TS 15414-2 (Revision)Determination of total moisture by a simplifiedmethod

will supersede DD CEN/TS 15414-2:2006

PTI/17

BS EN 15807Railway applications. Pneumatic half couplings

RAE/4

BS EN 16020Explosion diverters

FSH/23/-/3

BS EN 16023Characterization of sludges. Determination ofcalorific value

B/508/3

BS EN 12350-10Self-compacting concrete. L box test

B/517/1

BS EN 12350-11Self-compacting concrete. Sieve segregation test

B/517/1

BS EN 12350-12Self-compacting concrete. J-ring test

B/517/1

BS EN 13228 (Revision)Wood flooring. Solid wood overlay flooringelements including blocks with an interlockingsystem


B/543

BS EN 13445:—Unfired pressure vessels

BS EN 13445-5:2009/Amendment 1Inspection and testing

PVE/1

BS EN 13445-5:2009/Amendment 2Inspection and testing

PVE/1

BS EN 13614 (Revision)Bitumen and bituminous binders.Determination of adhesivity of bituminousemulsions by water immersion test. Aggregatemethod


PTI/13

BS EN 13647 (Revision)Wood and parquet flooring and woodpanelling and cladding. Determination ofgeometrical characteristics


B/543

BS EN 14211 (Revision)Ambient air quality. Standard method for themeasurement of the concentration of nitrogendioxide and nitrogen monoxide bychemiluminescence


EH/2/1

BS EN 14212 (Revision)Ambient air quality. Standard method for themeasurement of the concentration of sulphurdioxide by ultraviolet fluorescence


EH/2/1

BS EN 14214:2008/Amendment 1Automotive fuels. Fatty acid methyl esters(FAME) for diesel engines. Requirements andtest methods

PTI/2

BS EN 14625 (Revision)Ambient air quality. Standard method for themeasurement of the concentration of ozone byultraviolet photometry


EH/2/1

BS EN ISO 8292:—Animal and vegetable fats and oils.Determination of solid fat content by pulsedNMR

BS EN ISO 8292-1Direct method

AW/307

BS EN ISO 8292-2Indirect method

AW/307

BS EN ISO 9261Agricultural irrigation equipment. Emitters andemitting pipe. Specification and test methods

will supersede BS ISO 9261:2003

AGE/30

BS EN ISO 11446:—Road vehicles. Connectors for the electricalconnection of towing and towed vehicles

BS EN ISO 11446-213-pole connectors for vehicles with 12 Vnominal supply voltage intended to cross waterfords

AUE/16

BS EN 12199 (Revision)Resilient floor coverings. Specifications forhomogeneous and heterogeneous relief rubberfloor coverings


PRI/3/60

BS EN ISO 12217:—Small craft. Stability and buoyancy assessmentand categorization

BS EN ISO 12217-1 (Revision)Non-sailing boats of hull length greater than orequal to 6 m

will supersede BS EN ISO 12217-1:2002

GME/33

BS EN ISO 12217-2 (Revision)Sailing boats of hull length greater than orequal to 6 m


GME/33

BS EN ISO 12217-3 (Revision)Boats of hull length less than 6 m


GME/33

BS EN 12350:—Testing fresh concrete

BS EN 12350-8Self-compacting concrete. Slump-flow test

B/517/1

BS EN 12350-9Self-compacting concrete. V-funnel test

B/517/1


BS EN 62150:—Fibre optic active components and devices. Testand measurement procedures

BS EN 62150-2 (Revision)ATM-PON transceivers

will supersede BS EN 62150-2:2004

GEL/86/3

BS EN 62215:—Integrated circuits. Measurement of impulseimmunity

BS EN 62215-3Non-synchronous transient injection method

EPL/47

BS EN 62424Representation of process control engineering.Requests in P&I diagrams and data exchangebetween P&ID tools and PCE-CAE tools

GEL/65

BS ISO 1833:—Textiles. Quantitative chemical analysis

BS ISO 1833-25Mixtures of polyester and some other fibres(method using trichloracetic acid andchloroform)

TCI/80

BS ISO 5367Breathing tubes intended for use withanaesthetic apparatus and ventilators

will supersede BS 6151:1992

CH/121/5

BS ISO 5660:—Reaction-to-fire tests. Heat release, smokeproduction and mass loss rate

BS ISO 5660-4Measurement of heat release for determinationof low levels of combustibility

FSH/21/5

BS ISO 7240:—Fire detection and alarm systems

BS ISO 7240-6Carbon monoxide fire detectors using electro-chemical cells

FSH/12

BS ISO 7870:—Control charts

BS ISO 7870-4Cumulative sum charts

SS/4

BS ISO 9117:—Paints and varnishes. Drying tests

BS ISO 9117-4Test using a mechanical recorder

STI/10

BS EN 60704:—Household and similar electrical appliances. Testcode for the determination of airborneacoustical noise

BS EN 60704-2-13 (Revision)Particular requirements for range hoods

will supersede BS EN 60704-2-13:2000+A2:2008

CPL/59

BS EN 61076:—Connectors for electronic equipment. Productrequirements

BS EN 61076-4-116Printed board connectors. Detail specificationfor a high speed two-part connector withintegrated shielding function

EPL/48

BS EN 61400:—Wind turbines

BS EN 61400-4Design requirements for wind turbinegearboxes

will supersede BS ISO 81400-4:2005

PEL/88/-/4

BS EN 61701 (Revision)Salt mist corrosion testing of photovoltaic (PV)modules


GEL/82

BS EN 61788:—Superconductivity

BS EN 61788-16Electric characteristic measurements. Powerdependent surface resistance ofsuperconductors at microwave frequencies

L/-/90

BS EN 61788-17Electric characteristic measurements. Localcritical current density and its distribution inlarge-area superconducting films

L/-/90

BS EN 62148:—Fibre optic active components and devices.Package and interface standards

BS EN 62148-2 (Revision)SFF MT-RJ 10-pin transceivers


GEL/86/3

BS EN 62148-3 (Revision)SFF MT-RJ 20-pin transceivers


GEL/86/3

BS EN 16024Fertilizers. Determination of 1H, 2, 4-triazole inurea and in fertilizers containing urea. Methodusing high-performance liquid chromatography(HPLC)

CII/37

BS EN ISO 20643:2008/Amendment 1Mechanical vibration. Hand-held and hand-guided machinery. Principles for evaluation ofvibration emission

MCE/8/-/2

BS EN ISO 23953:—Refrigerated display cabinets

BS EN ISO 23953-2:2005/Amendment 1Classification, requirements and test conditions

RHE/19

BS EN ISO 28300 (Revision)Petroleum, petrochemical and natural gasindustries. Venting of atmospheric and low-pressure storage tanks


PSE/17/-/6

BS EN 60099:—Surge arresters

BS EN 60099-5 (Revision)Selection and application recommendations


PEL/37

BS EN 60512:—Connectors for electronic equipment. Tests andmeasurements

BS EN 60512-16-21Test 16u. Whisker test via the application ofexternal mechanical stresses

EPL/48

BS EN 60601:—Medical electrical equipment

BS EN 60601-2:—Particular requirements for the basic safety andessential performance

BS EN 60601-2-3 (Revision)Specification for short-wave therapy equipment

will supersede BS EN 60601-2-3:1993

CH/62/4

BS EN 60601-2-6Specification for microwave therapy equipment

will supersede BS 5724-2.6:1985

CH/62/4

BS EN 60601-2-10 (Revision)Specification for nerve and muscle stimulators

will supersede BS EN 60601-2-10:2001

CH/62/4

New Work Started continued...


BS ISO 18437:—Mechanical vibration and shock.Characterization of the dynamic mechanicalproperties of visco-elastic materials

BS ISO 18437-5Poisson’s ratio based on finite element analysis

GME/21

BS ISO 18669:—Internal combustion engines. Pistons pins

BS ISO 18669-1 (Revision)General specifications


MCE/14/-/10

DD ISO/TS 18692:—Fibre ropes for offshore station keeping

DD ISO/TS 18692-2High modulus polyethylene (HMPE)

TCI/100

BS ISO 18944Imaging materials. Reflection colourphotographic prints. Specifications forconsumer test print construction andmeasurement

CPW/42

BS ISO 20176 (Revision)Road vehicles. H-Point machine (HPM II).Specifications and procedure for H-pointdetermination

will supersede BS ISO 20176:2006

AUE/12

BS ISO 21891Aerospace electrical requirements. Insulating,heat shrink, sleeves and moulded shapes.Specification for aircraft use

ACE/6

BS ISO 22241:—Diesel engines. NOx Reduction agent AUS32

BS ISO 22241-5Refilling interface for passenger cars

MCE/22

BS ISO 23640In vitro diagnostic medical devices. Stabilitydetermination and/or verification of in vitrodiagnostic reagents

CH/212

BS ISO/IEC 24702:2006/Amendment 1Information technology. Generic cabling.Industrial premises

TCT/7

BS ISO 26146Corrosion of metals and alloys. Method formettalographic examination of samples afterexposure to high temperature corrosiveenvironments

ISE/NFE/8

BS ISO 13092Titanium and titanium alloys. Titanium sponge

NFE/35

BS ISO 13374:—Condition monitoring and diagnostics ofmachines. Data processing, communication andpresentation

BS ISO 13374-3Data communication

GME/21/7

BS ISO 13573Corrosion of metals and alloys. Test method forthermal cycling exposure testing under hightemperature corrosion conditions for metallicmaterials

ISE/NFE/8

BS ISO 14932Rubber compounding ingredients. Organicvulcanizing agents. Determination of organicperoxide content

PRI/23

BS ISO 15006Road vehicles. Ergonomics aspects of transportinformation and control systems. Specificationsfor in-vehicle auditory presentation


AUE/12

BS ISO 15222Commercial vehicles. Method for measuringrelative wet grip performance. Loaded tyres

AUE/4

BS ISO 16732Fire safety engineering. Guidance on fire riskassessment

FSH/16

BS ISO/IEC 18013:—Information technology. Personal identification.ISO/IEC compliant driving licence

BS ISO/IEC 18013-4Test method for Extended Access Protection

IST/17

BS ISO 18132:—Refrigerated light hydrocarbon fluids. Generalrequirements for automatic level gauges

BS ISO 18132-1 (Revision)Gauges onboard ships carrying liquefied gases


PTI/13

BS ISO 18265Metallic materials. Conversion of hardnessvalues


ISE/NFE/4

BS ISO 9117-5Modified Bandow-Wolff test

STI/10

BS ISO/IEC 10373:—Identification cards. Test methods

BS ISO/IEC 10373-1:2006/Amendment 1General characteristics

IST/17

BS ISO 10791:—Test conditions for machining centres

BS ISO 10791-7 (Revision)Accuracy of a finished test piece


MTE/1/2

BS ISO 10924:—Road vehicles. Circuit breakers

BS ISO 10924-2User’s guide

AUE/16

BS ISO/IEC 11695:—Identification cards. Optical memory cards.Holographic recording method

BS ISO/IEC 11695-4Logical data structures

IST/17

BS ISO 12239Fire detection and fire alarm systems. Smokealarms

FSH/12

BS ISO 12297Rolling bearings. Rolling elements. Steelcylindrical rollers

MCE/7

BS ISO 12357:—Road vehicles. Drawbar couplings and eyes forrigid drawbars

BS ISO 12357-3Strength tests for multiple vehicle

AUE/13

BS ISO 13044:—Road vehicles. Fully automatic coupling systems24 V (FACS) for heavy commercial vehiclecombinations

BS ISO 13044-1General requirements and definitions

AUE/13

BS ISO 13044-250 mm fifth wheel couplings. Electrical andpneumatic interface

AUE/13

BS ISO 13076Paints and varnishes. Visual assessment ofcoating defects

STI/10


09/30209267 DCBS 5911-5 AMD1 Concrete pipes and ancillaryconcrete products. Part 5. Specification forprestressed non-pressure pipes and fittings withflexible joints

B/505/9

09/30209269 DCBS 5911-6 AMD1 Concrete pipes and ancillaryconcrete products. Part 6. Specification for roadgullies and gully cover slabs

B/505/9

09/30209377 DCNA to BS EN 1999-1-1 AMD1 UK NationalAnnex to Eurocode 9. Design of aluminiumstructures. Part 1-1. General structural rules

B/525/9

09/30209809 DCBS 6213 AMD1 Selection of constructionsealants. Guide

B/547

Comments for the above document are required by

30 November, 2009

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –ADOPTIONS

All Draft British Standards are availablefrom BSI Customer Services (see “How toorder” on page 2)

Most drafts are charged at£10.00 to members and£20.00 to non-members.

Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 31 December, 2009 unlessotherwise stated, to be considered by therelevant BSI committee.

Draft standards may be modified beforeadoption and issue as British Standards.

09/30140724 DCBS ISO 26000 Guidance on social responsibility


SDS/1


30 November, 2009

09/30141999 DCBS ISO/IEC 24706 Information technology.Metadata for technical standards andspecification documents

IST/40


6 December, 2009

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –NATIONAL BRITISHSTANDARDS

You may now comment on any NationalBritish Standard online. BSI BritishStandards has launched a Draft Reviewsystem which allows access to the draftsof all National British Standards. Toenhance access of Drafts for PublicComment for the wider community, makecomments more visible and move intocollaborative working practices, you willnow be able to comment on any NationalBritish Standard by visitinghttp://www.bsigroup.com/drafts. Allyou need to do is register. This service isfree of charge.

Please note that the only standardsavailable on this service are pure BritishStandards (National Standards e.g:BS XXXX). European and internationaldocuments are not included at this time.

Deadlines for receipt of comments oneach of the individual drafts can be foundat http://www.bsigroup.com/drafts.The deadline for the following drafts is31 December, 2009 unless otherwisestated.

Should you wish to receive these drafts inhard copy format, they are available for afee from BSI Customer Services (see “Howto order” on page 2).

09/30182723 DCBS 7942 Thermostatic mixing valves for use incare establishments. Requirements and testmethods

B/504

09/30198591 DCBS 8517-2 Security dogs. Part 2. Code ofpractice for the use of detection dogs

GW/3

09/30205838 DCBS 8887-220 Design for manufacture, assembly,disassembly and end-of-life processing. Part 220. Remanufacture

TDW/4

09/30209261 DCBS 5911-1 AMD2 Concrete pipes and ancillaryconcrete products. Part 1. Specification forunreinforced and reinforced concrete pipes(including jacking pipes) and fittings withflexible joints (complementary toBS EN 1916:2002)

B/505/9

09/30209265 DCBS 5911-4 AMD2 Concrete pipes and ancillaryconcrete products. Part 4. Specification forunreinforced and reinforced concrete inspectionchambers (complementary to BS EN 1917:2002)

B/505/9

BS ISO/IEC 27014Information technology. Information securitygovernance framework

IST/33

BS ISO/IEC 27015Information technology. Information securitymanagement system for financial and insuranceservices sector

IST/33

BS ISO/IEC 27033:—Information technology. Network security

BS ISO/IEC 27033-7Wireless

IST/33

PD ISO/IEC TR 29162Information technology. Automaticidentification and data capture techniques.Guidelines for using data structures in AIDCmedia

IST/34

PD CLC/TR 50173:—Information technology

PD CLC/TR 50173-99-2Implementation of BCT applications usingcabling in accordance with EN 50173-4

TCT/7

PD IEC/TR 60601:—Medical electrical equipment

PD IEC/TR 60601-2-64Guideline for the safe use of medical productsin dialysis treatment

CH/62/4

DD IEC/PAS 61076:—Connectors for electronic equipment. Productrequirements

DD IEC/PAS 61076-2-109Circular connectors. Detail specification forconnectors M 12 x 1 with screw-locking, fordata transmissions with frequencies up to 500 MHz

EPL/48

DD IEC/PAS 62326:—Device embedded substrate

DD IEC/PAS 62326-14Terminology/Reliability/Design Guide

EPL/501

PD IEC/TR 62652Effects of engaging and separating underelectrical load on connector interfaces incabling used to support IEEE 802.af (Power-over-Ethernet) applications

EPL/48

PAS XXXXPrerequisite programmes on food safety forfood retail

New Work Started continued...


09/30187498 DCBS EN ISO 28927-11 Hand-held portablepower tools. Test methods for evaluation ofvibration emission. Part 11. Stone hammers

MCE/8/-/2

09/30187580 DCBS EN ISO 10863 Welding. Use of time-of-flight diffraction technique (TOFD) for testingof welds

WEE/46

09/30190446 DCBS ISO 1496-1 AMD7 Series 1 freightcontainers. Specification and testing. Part 1.General cargo containers for general purposes

TW/1

09/30192451 DCBS ISO 6721-11 Plastics. Determination ofdynamic mechanical properties. Part 11. Glasstransition temperature

PRI/21


31 January, 2010

09/30192593 DCBS ISO 27468 Nuclear criticality safety. Burnupcredit in evaluations of systems containing PWRfuels

NCE/9

09/30193281 DCBS EN 14658 AMD1 Continuous handlingequipment and systems. General safetyrequirements for continuous handlingequipment for opencast lignite mining

MRE/1


15 November, 2009

09/30193817 DCBS EN ISO 8624 Ophthalmic optics. Spectacleframes. Measuring system and terminology

CH/172/3

09/30195714 DCBS ISO 29941 Condoms. Determination ofnitrosamines migrating from natural rubberlatex condoms into various media

CH/157

09/30195717 DCBS ISO 29942 Prophylactic dams. Requirementsand test methods

CH/157

09/30195720 DCBS EN ISO 4074 Natural rubber latex condoms.Requirements and test methods

CH/157

09/30195735 DCBS ISO 16038 Male condoms. Guidance on theuse of ISO 4074 and ISO 23409 in the qualitymanagement of natural rubber latex condomsand synthetic condoms

CH/157

09/30195933 DCBS EN ISO 14403-1 Water quality.Determination of total cyanide and free cyanideusing flow analysis (FIA and CFA). Part 1.Method with flow injection analysis (FIA)

EH/3/2

09/30175558 DCBS ISO/IEC 19794-4 Information technology.Biometric data interchange formats. Part 4.Finger image data

IST/44


15 November, 2009

09/30175562 DCBS ISO/IEC 19794-5 Information technology.Biometrics. Biometric data interchange formats.Part 5. Face image data


IST/44


15 November, 2009

09/30175568 DCBS ISO/IEC 19794-8 Information technology.Biometric data interchange formats. Part 8.Finger pattern skeletal data

IST/44


15 November, 2009

09/30175705 DCBS ISO/IEC 19784-1 AMD3 Informationtechnology. Biometric application programminginterface. Part 1. BioAPI specification

IST/44


15 November, 2009

09/30179492 DCBS ISO 11774 Non-destructive testing.Performance based qualification

WEE/46


31 January, 2010

09/30179779 DCBS EN 13457 AMD1 Footwear, leather andimitation leather goods manufacturingmachines. Splitting, skiving, cutting, cementingand cement drying machines. Safetyrequirements

MCE/3/12

09/30183034 DCBS ISO 6469-3 Electrically propelled roadvehicles. Safety specifications. Part 3. Protectionof persons against electric shock

PEL/69

09/30185734 DCBS EN 116/BS 2000-309 Diesel and domesticheating fuels. Determination of cold filterplugging point

PTI/13


31 January, 2010

09/30186922 DCBS EN ISO 13585 Brazing. Brazer qualification

WEE/19

09/30187493 DCBS ISO 28927-10 Hand-held portable powertools. Test methods for evaluation of vibrationemission. Part 10. Percussive drills, hammers andbreakers

MCE/8/-/2

09/30158072 DCBS ISO 7641 Road vehicles. Trailers up to 3,5 t.Calculation of the mechanical strength of steeldrawbars

AUE/8

09/30162983 DCBS EN ISO 13297 Small craft. Electrical systems.Alternating current installations

GME/33


31 January, 2010

09/30164514 DCBS EN 61196-7 Coaxial communication cables.Part 7. Sectional specification for cables for BCTcabling in accordance with ISO/IEC 15018.Indoor drop cables for systems operating at 5 MHz-3000 MHz

EPL/46


26 January, 2010

09/30169628 DCBS EN ISO 28927-4 Hand-held portable powertools. Test methods for evaluation of vibrationemission. Part 4. Straight grinders

MCE/8/-/2

09/30171555 DCBS EN ISO 10437 Petroleum, petrochemicaland natural gas industries. Steam turbines.Special-purpose applications


PSE/17/-/6


20 January, 2010

09/30173896 DCBS ISO 11853 Rubber. Determination ofmagnesium content of raw natural rubber andrubber products by atomic absorptionspectrometry

PRI/23


31 January, 2010

09/30175540 DCBS ISO/IEC 29109-5 Information technology.Conformance testing methodology forbiometric interchange records. Part 5. Faceimage conformance testing

IST/44


15 November, 2009

09/30175549 DCBS ISO/IEC 19794-1 Biometric data interchangeformats. Part 1. Framework

IST/44


15 November, 2009

09/30175552 DCBS ISO/IEC 19794-2 Biometric data interchangeformats. Part 2. Finger minutiae data

IST/44


15 November, 2009


09/30203647 DCBS EN 1906 Building hardware. Lever handlesand knob furniture. Requirements and testmethods

B/538/4


27 January, 2010

09/30204685 DCBS ISO/IEC 26500 Information technology.Application management. Requirements forapplication management

IST/15

09/30205710 DCBS ISO 15877-3 AMD1 Plastics piping systemsfor hot and cold water installations. Chlorinatedpoly(vinyl chloride) (PVC-C). Part 3. Fittings

PRI/88/2

09/30205924 DCBS EN 13976-1 Rescue systems. Transportationof incubators. Part 1. Interface conditions

CH/239

09/30205927 DCBS EN 13976-2 Rescue systems. Transportationof incubators. Part 2. System requirements

CH/239

09/30206195 DCBS EN ISO 9311-2 Adhesives for thermoplasticpiping systems. Part 2. Determination of shearstrength

PRI/88/4

09/30206253 DCBS EN ISO 14372 Welding consumables.Determination of moisture resistance of manualmetal arc welding electrodes by measurementof diffusible hydrogen

WEE/39

09/30206340 DCBS EN 14511-1 Air conditioners, liquid chillingpackages and heat pumps with electricallydriven compressors for space heating andcooling. Part 1. Terms and definitions

RHE/17

09/30206343 DCBS EN 14511-2 Air conditioners, liquid chillingpackages and heat pumps with electricallydriven compressors for space heating andcooling. Part 2. Test conditions

RHE/17

09/30206346 DCBS EN 14511-3 Air conditioners, liquid chillingpackages and heat pumps with electricallydriven compressors for space heating andcooling. Part 3. Test methods

RHE/17

09/30206349 DCBS EN 14511-4 Air conditioners, liquid chillingpackages and heat pumps with electricallydriven compressors for space heating andcooling. Part 4. Requirements

RHE/17

09/30197747 DCBS ISO 10218-1 Robots and robotic devices.Safety requirements. Part 1. Industrial robots

AMT/-/2

09/30197768 DCBS ISO 11132 Sensory analysis. Methodology.General guidance for monitoring theperformance of a quantitative sensory panel

AW/12


6 January, 2010

09/30198874 DCBS ISO 12830 Paper, board and pulps.Determination of acid-soluble magnesium,calcium, manganese, iron, copper, sodium andpotassium

PAI/11


8 January, 2010

09/30198885 DCBS EN ISO 14602 Non-active surgical implants.Implants for osteosynthesis. Particularrequirements

CH/150/5

09/30199026 DCBS ISO/IEC 17021-2 Conformity assessment.Requirements for bodies providing audit andcertification of management systems andrequirements for third-party certificationauditing of management systems. Part 2.Requirements for third party certificationauditing of management systems

CAS/1


8 January, 2010

09/30199986 DCBS ISO 15524 Pneumatic fluid power. Cylinders.Single-rod short-stroke cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm

MCE/18/-/3

09/30200348 DCBS EN ISO 544 Welding consumables. Technicaldelivery conditions for filler materials andfluxes. Type of product, dimensions, tolerancesand markings

WEE/39

09/30201246 DCBS EN 710 AMD1 Safety of machinery. Safetyrequirements for foundry moulding andcoremaking machinery and plant associatedequipment

MCE/3/10

09/30202228 DCBS ISO/IEC 23002-4 AMD1 Informationtechnology. MPEG video technologies. Part 4.Video tool library

IST/37

09/30202403 DCBS EN 50532 Compact Equipment Assembly forDistribution Substations (CEADS)

PEL/17/1

09/30195937 DCBS ISO 14403-2 Water quality. Determinationof total cyanide and free cyanide using flowanalysis (FIA and CFA). Part 2. Method withcontinuous flow analysis (CFA)

EH/3/2

09/30196077 DCBS ISO 3405 Petroleum products.Determination of distillation characteristics atatmospheric pressure

PTI/13

09/30196132 DCBS ISO 11513 Gas cylinders. Refillable weldedsteel cylinders containing adsorbent materialsfor sub-atmospheric gas packaging. Design,construction and testing

PVE/3/3


9 December, 2009

09/30196200 DCBS ISO 10376 Pulps. Determination of massfraction of fines

PAI/11


8 January, 2010

09/30196533 DCBS ISO 29821-1 Condition monitoring anddiagnostics of machines. Ultrasound. Part 1.General guidelines

GME/21/7


25 November, 2009

09/30196537 DCBS ISO 18192-2 Implants for surgery. Wear oftotal intervertebral spinal disc prostheses. Part 2. Nucleus replacements

CH/150/5

09/30196799 DCBS ISO 11037 Sensory analysis. Generalguidance for sensory assessment of the colourof products

AW/12


6 January, 2010

09/30196913 DCBS ISO 11783-5 Tractors and machinery foragriculture and forestry. Serial control andcommunications data network. Part 5. Networkmanagement

AGE/32

09/30197034 DCBS ISO 15621 Urine-absorbing aids. Generalguidance on evaluation

CH/173/-/3

09/30197371 DCBS ISO 3864-4 Graphical symbols. Safetycolours and safety signs. Part 4. Colorimetricand photometric properties of safety signmaterials

PH/8/1

09/30197377 DCBS ISO 3864-1 Graphical symbols. Safetycolours and safety signs. Part 1. Designprinciples for safety signs and safety markings

PH/8/1

Draft British Standards for Public Comment continued...


09/30209891 DCBS ISO/IEC 23006-2 Information technology.MPEG extensible middleware (MXM). Part 2.MXM API

IST/37

09/30209893 DCBS ISO/IEC 23006-3 Information technology.MPEG extensible middleware (MXM). Part 3.MXM conformance and reference software

IST/37

09/30209895 DCBS ISO/IEC 23006-4 Information technology.MPEG extensible middleware (MXM). Part 4.MXM protocols

IST/37

09/30209898 DCBS EN 3813 Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wirefor forged fasteners. De ≤ 50 mm

ACE/00


4 December, 2009

09/30209900 DCBS EN 3155-035 Aerospace series. Electricalcontacts used in elements of connection. Part 035. Contacts, electrical, triaxial, size 08,female, type D, crimp, class R. Product standard

ACE/6


4 December, 2009

09/30209901 DCBS EN 2267-012 Aerospace series. Cables,electrical, for general purpose. Operatingtemperatures between -65°C and 260°C. Part 012. XX family, single UV laser printable foruse in low pressure atmosphere

ACE/6


4 December, 2009

09/30209902 DCBS EN 2267-011 Aerospace series. Cables,electrical, for general purpose. Operatingtemperatures between -65°C and 260°C. Part 011. XXA family, single and multicoreassembly for use in low pressure atmosphere

ACE/6


4 December, 2009

09/30209903 DCBS EN 2714-015 Aerospace series. Cables,electrical, single and multicore for generalpurpose. Operating temperatures between -65°C and 260°C. Part 015. XX family, screened(spiral) and jacketed, UV laser printable for usein low pressure atmosphere. Product standard

ACE/6


4 December, 2009

09/30209904 DCBS EN 3745-517 Aerospace series. Fibres andcables, optical, aircraft use. Test methods. Part 517. Cable, fibre optic, cable tie clampingtest

ACE/6


4 December, 2009

09/30207063 DCBS EN 14105 Fat and oil derivates. Fatty AcidMethyl Esters (FAME). Determination of freeand total glycerol and mono-, di-, triglyceridecontent (Reference method)

AW/307

09/30207066 DCBS EN 15999 Conservation of cultural heritage.Guidelines for management of environmentalconditions. Recommendations for showcasesused for exhibition and preservation of culturalheritage

B/560

09/30207398 DCBS ISO 7240-3 Fire detection and alarmsystems. Part 3. Audible alarm devices

FSH/12


2 February, 2010

09/30207449 DCBS EN 1846-1 Fire fighting and rescue servicevehicles. Part 1. Nomenclature and designation

FSH/17


31 January, 2010

09/30208397 DCBS EN 62648 Graphical symbols for use onequipment. Guidelines for the inclusion ofgraphical symbols in IEC publications

GEL/3

09/30209746 DCBS EN 60749-29 Semiconductor devices.Mechanical and climatic test methods. Part 29.Latch-up test

EPL/47

09/30209772 DCBS EN 60512-26-100 AMD1 Connectors forelectronic equipment. Tests and measurements.Part 26-100. Measurement setup, test andreference arrangements and measurements forconnectors according to IEC 60603-7. Tests 26ato 26g

EPL/48

09/30209802 DCBS EN 2252 Aerospace series. Steel FE-PL1505(15CrMoV6). 1080 MPa ≤ Rm ≤ 1250 MPa.Forgings. De ≤ 100 mm

ACE/61/-/15

09/30209876 DCBS EN ISO 23953-1 AMD1 Refrigerated displaycabinets. Part 1. Vocabulary

RHE/19

09/30209882 DCBS EN ISO 23953-2 AMD1 Refrigerated displaycabinets. Part 2. Classification, requirementsand test conditions

RHE/19

09/30209889 DCBS ISO/IEC 23006-1 Information technology.MPEG extensible middleware (MXM). Part 1.MXM architecture and technologies

IST/37

09/30206358 DCBS EN 1870-4 Safety of woodworkingmachines. Circular sawing machines. Part 4.Multi-blade rip sawing machines with manualloading and/or unloading

MTE/23

09/30206385 DCBS EN 13759 Furniture. Operating mechanismsfor seating and sofa-beds. Test methods

FW/0/2


10 January, 2010

09/30206536 DCBS ISO/IEC 29159-1 Information technology.Biometric calibration, augmentation and fusiondata. Part 1. Fusion information format

IST/44


15 November, 2009

09/30206591 DCBS ISO/IEC 29109-9 Information technology.Conformance Testing Methodology forBiometric Data Interchange Formats defined inISO/IEC 19794-9. Part 9. Vascular Image Data

IST/44


15 November, 2009

09/30206692 DCBS EN 228 Automotive fuels. Unleaded petrol.Requirements and test methods

PTI/2

09/30206695 DCBS EN 15376 Automotive fuels. Ethanol as ablending component for petrol. Requirementsand test methods

PTI/2

09/30206726 DCBS EN 12464-1 Light and lighting. Lighting ofwork places. Part 1. Indoor work places

CPL/34/10

09/30206732 DCBS EN 1991-1-4 AMD1 Eurocode 1. Actions onstructures. Part 1-4. General actions. Windactions

B/525/1


4 December, 2009

09/30206741 DCBS EN 15997 All terrain vehicles. Safetyrequirements and test methods

AGE/6

09/30206834 DCBS EN 15686 Railway applications. Testing forthe acceptance of running characteristics ofrailway vehicles with cant deficiencycompensation system and/or vehicles intendedto operate with higher cant deficiency thanstated in EN 14363:2005, Annex G

RAE/1/-/8

09/30206837 DCBS EN 15687 Railway applications. Testing forthe acceptance of running characteristics offreight vehicles with static axle loads higherthan 225 kN and up to 250 kN

RAE/1/-/8


09/30210287 DCBS EN 60086-1 Primary batteries. Part 1.General

CPL/35


22 January, 2010

09/30210291 DCBS EN 60086-2 Primary batteries. Part 2.Physical and electrical specifications

CPL/35


22 January, 2010

09/30210295 DCBS EN 60086-3 Primary batteries. Part 3. Watchbatteries

CPL/35


22 January, 2010

09/30210300 DCBS EN 60086-5 Primary batteries. Part 5. Safetyof batteries with aqueous electrolyte

CPL/35


22 January, 2010

09/30210353 DCBS EN 3464 Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Plate. 6 mm > a ≤ 100 mm

ACE/61/-/49


18 December, 2009

09/30210355 DCBS EN 50173-5 AMD1 Information technology.Generic cabling systems. Part 5. Data centres

TCT/7


29 December, 2009

09/30210361 DCBS EN 3456 Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Sheet andstrip, hot rolled. a ≤ 6 mm

ACE/61/-/49


18 December, 2009

09/30210369 DCBS IEC 61643-11 Low-voltage surge protectivedevices. Part 11. Surge protective devicesconnected to low-voltage power distributionsystems. Performance requirements and testingmethods

PEL/37/1

09/30210420 DCBS EN ISO 439 Steel and iron. Determinationof total silicon content. Gravimetric method

ISE/18

09/30210423 DCBS EN ISO 15350 Steel and iron. Determinationof total carbon and sulfur content. Infraredabsorption method after combustion in aninduction furnace (routine method)

ISE/18

09/30210068 DCBS EN 4531-005 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring. Flush contacts. Part 005. Plug.Product standard

ACE/6


16 December, 2009

09/30210077 DCBS EN 50173-1 AMD1 Information technology.Generic cabling systems. Part 1. Generalrequirements

TCT/7


29 December, 2009

09/30210081 DCBS EN 50173-2 AMD1 Information technology.Generic cabling systems. Part 2. Office premises

TCT/7


29 December, 2009

09/30210107 DCBS EN 50173-3 AMD1 Information technology.Generic cabling systems. Part 3. Industrialpremises

TCT/7


29 December, 2009

09/30210110 DCBS EN 50173-4 AMD1 Information technology.Generic cabling systems. Part 4. Homes

TCT/7


29 December, 2009

09/30210117 DCBS ISO/IEC 11695-4 Identification cards.Optical memory cards. Holographic recordingmethod. Part 4. Logical data structures

IST/17

09/30210121 DCBS EN 4531-101 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring. Flush contacts. Part 101. Opticalcontact for EN 4641-100 cable -55°C to 125°C.Product standard

ACE/6


16 December, 2009

09/30210122 DCBS EN 4531-901 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring. Flush contacts. Part 901. Squareflange receptacle. Product standard

ACE/6


16 December, 2009

09/30210211 DCBS EN ISO 19905-1 Petroleum and natural gasindustries. Site-specific assessment of mobileoffshore units. Part 1. Jack-ups


B/525/12

09/30209905 DCBS EN 3745-515 Aerospace series. Fibres andcables, optical, aircraft use. Test methods. Part515. Cable, fibre optic, buffer insertion force

ACE/6


4 December, 2009

09/30209906 DCBS EN 3745-516 Aerospace series. Fibres andcables, optical, aircraft use. Test methods. Part 516. Severe cable bend test

ACE/6


4 December, 2009

09/30209939 DCBS EN 60749-34 Semiconductor devices.Mechanical and climatic test methods. Part 34.Power cycling

EPL/47

09/30209949 DCBS EN 60570 Electrical supply track systems forluminaires

CPL/34/4

09/30209972 DCBS EN 62005-9-3 Fibre optic interconnectingdevices and passive components. Reliability. Part 9-3. Reliability qualification for 1-rowmulti-fibre rectangular ferrule angled PC opticconnector sets. Single mode, Category C

GEL/86/2


13 November, 2009

09/30210064 DCBS EN 4531-001 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring. Flush contacts. Part 001.Technical specification

ACE/6


16 December, 2009

09/30210065 DCBS EN 4531-002 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring. Flush contacts. Part 002.Specification of performance and contactarrangements

ACE/6


16 December, 2009

09/30210066 DCBS EN 4531-003 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring. Flush contacts. Part 003. Squareflange receptacle. Product standard

ACE/6


16 December, 2009

09/30210067 DCBS EN 4531-004 Aerospace series. Connectors,optical, circular, single and multipin, coupled bythreaded ring. Flush contacts. Part 004. Jam nutreceptacle. Product standard

ACE/6


16 December, 2009

Draft British Standards for Public Comment continued...


DOCUMENTS NOT ISSUEDAS DPCs


IEC 62640Residual current devices with or withoutovercurrent protection for socket-outlets forhousehold and similar uses

This draft is not being issued as a draft forpublic comment but a copy may be obtainedfrom the Programme Manager (below).Comments should be submitted by 31 January, 2010.

Contact: Bob Stratton


PEL/23/1

IEC/TS 62649Requirements for measurement standards forHigh Intensity Therapeutic Ultrasound (HITU)Devices

This standard has been circulated to IECmembers as a Draft Technical Report by IEC/TC87. This has not been circulated as a Draft forPublic Comment (DPC), but copies of the textare available from the Programme Manager(below).

Contact: Philippa Younas


EPL/87

ISO/DIS 1352Metallic materials. Torque-controlled fatiguetesting

This standard is available for comment until the12 November, 2009. Copies are available uponrequest from the Programme Manager (below).

Contact: Alex Price


ISE/NFE/4/6

ISO/FDIS 1926Rigid cellular plastics. Determination of tensileproperties

The above draft has been circulated for FDISvote. Copies are available on request from thecontact point (below) using referencePRI/24_09_0021. Please note that no DPC hasbeen issued for this.

Contact: Committee Service Centre


PRI/24

prEN 2240:—Aerospace series. Lamps, incandescent

prEN 2240-011Lamp, code 85. Product standard










These standards have been circulated forFormal Vote. The text is available on requestfrom the contact point (below).



ACE/6

prEN 2852Aerospace series. Nuts, hexagonal, plain,normal height, normal across flats, heatresisting steel passivated. Classification: 1100 MPa/650°C

This standard has been circulated for FormalVote. The text is available on request from thecontact point (below).



ACE/12

prEN 3537Aerospace series. Nuts, anchor, self-locking,fixed, two lug, with counterbore, in heatresisting steel, MoS2 lubricated. Classification:1100 MPa (at ambient temperature)/315°C

prEN 3538Aerospace series. Nuts, anchor, self-locking,fixed, two lug, reduced series, withcounterbore, in heat resisting steel, MoS2lubricated. Classification: 1100 MPa (at ambienttemperature)/315°C

prEN 3539Aerospace series. Nuts, anchor, self-locking, onelug, fixed, with counterbore, in heat resistingsteel, MoS2 lubricated. Classification: 1100 MPa(at ambient temperature)/315°C

The above have recently been issued for FormalVote. Copies of the text are available onrequest from the contact point (below).



ACE/12

09/30210426 DCBS EN ISO 15351 Steel and iron. Determinationof nitrogen content. Thermal conductimetricmethod after fusion in a current of inert gas(Routine method)

ISE/18

09/30210454 DCBS EN 60512-16-21 Connectors for electronicequipment. Tests and measurements. Part 16-21.Test 16u. Whisker test via the application ofexternal mechanical stresses

EPL/48


30 November, 2009

09/30210471 DCBS EN 62148-2 Fibre optic active componentsand devices. Package and interface standards.Part 2. SFF 10-pin transceivers

GEL/86/3

09/30210475 DCBS EN 62148-3 Fibre optic active componentsand devices. Package and interface standards.Part 3. SFF 20-pin transceivers

GEL/86/3

09/30210479 DCBS EN 50136-1 Alarm systems. Alarmtransmission systems. Part 1. Generalrequirements for alarm transmission systems

GW/1/5


27 November, 2009

09/30210570 DCBS EN 61300-3-25 Fibre optic interconnectingdevices and passive components. Basic test andmeasurement procedures. Part 3-25.Examinations and measurements. Concentricityof the ferrules and ferrules with fibre installed

GEL/86/2


15 December, 2009

09/30210593 DCBS EN 62150-2 Fibre optic active componentsand devices. Test and measurement procedures.Part 2. ATM-PON transceivers

GEL/86/3

09/30210618 DCBS EN 60947-3 AMD1 Low-voltage switchgearand controlgear. Part 3. Switches, disconnectors,switch-disconnectors and fuse-combinationunits

PEL/17/2


17 December, 2009

09/30210725 DCBS ISO 8009 AMD1 Mechanical contraceptives.Reusable natural and silicone rubbercontraceptive diaphragms. Requirements andtests

CH/157

09/30210728 DCBS ISO 16037 AMD1 Rubber condoms forclinical trials. Measurement of physicalproperties

CH/157


EN 1870-11:2003+A1:2009Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radialarm saws)

MTE/23

EN 1870-12:2003+A1:2009Pendulum cross-cut sawing machines

MTE/23

EN 1870-13:2007+A1:2009Horizontal beam panel sawing machines

MTE/23

EN 1870-17:2007+A2:2009Manual horizontal cutting cross-cut sawingmachines with one saw unit (manual radial armsaws)

MTE/23

EN 1953:1998+A1:2009Atomising and spraying equipment for coatingmaterials. Safety requirements

MCE/3/8

EN 2815:2009Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5).Consumable electrode remelted. Solution treatedand precipitation treated. Bar for machining. a orD ≤ 200 mm. Rm ≥ 965 MPa

ACE/61/-/15

EN 2818:2009Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5).Consumable electrode remelted. Solution treatedand precipitation treated. Forgings. a or D ≤200 mm. Rm ≥ 1070 MPa

ACE/61/-/15

EN 3311:2009Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar for machining. D < 110 mm

ACE/61/-/49

EN 3469:2009Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5).Consumable electrode remelted. Solution treatedand precipitation treated. Forgings. a or D ≤200 mm. Rm ≥ 1310 MPa

ACE/61/-/15

EN 3660:—Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors

EN 3660-016:2009Grommet nut, style A, self-locking and non self-locking for EN 3645. Product standard

ACE/6

EN 3660-020:2009Cable outlet, style A, straight, unsealed withclamp strain relief for EN 3645. Productstandard

ACE/6

EN 3660-021:2009Cable outlet, style A, 90°, unsealed

ACE/6

EN 609-2:1999+A1:2009Screw splitters

AGE/29

EN 848:—Safety of woodworking machines. One sidemoulding machines with rotating tools

EN 848-3:2007+A2:2009Numerically controlled (NC) boring and routingmachines

MTE/23

EN 1012:—Compressors and vacuum pumps. Safetyrequirements

EN 1012-2:1996+A1:2009Vacuum pumps

MCE/8/-/4

EN 1837:1999+A1:2009Safety of machinery. Integral lighting ofmachines

CPL/34/10

EN 1853:1999+A1:2009Agricultural machinery. Trailers with tippingbody. Safety

AGE/32

EN 1870:—Safety of woodworking machines. Circularsawing machines

EN 1870-5:2002+A1:2009Circular saw benches/up-cutting cross-cutsawing machines

MTE/23

EN 1870-6:2005+A1:2009Circular sawing machines for firewood and dualpurpose circular sawing machines forfirewood/circular saw benches, with manualloading and/or unloading

MTE/23

EN 1870-7:2002+A1:2009Single blade log sawing machines withintegrated feed table and manual loadingand/or unloading

MTE/23

EN 1870-8:2001+A1:2009Single blade edging circular rip sawingmachines with power driven saw unit andmanual loading and/or unloading

MTE/23

EN 1870-9:2000+A1:2009Double blade circular sawing machines forcross-cutting with integrated feed and withmanual loading and/or unloading

MTE/23

EN 1870-10:2003+A1:2009Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

MTE/23

prEN 6072Aerospace series. Metallic materials. Testmethods. Constant amplitude fatigue testing

This standard is being circulated for FormalVote. The text is available on request from thecontact point (below).



ACE/61

CEN/CENELEC UNIQUEACCEPTANCE PROCEDURE


prEN ISO 5173

(ISO 5173:2009)Destructive tests on welds in metallic materials.Bend tests

This document, which will not be issued as aDraft for Public Comment, is identical toISO 5173:2009. It has been circulated toCEN members for voting.

Contact: Anne Hannan


WEE/2

CEN EUROPEANSTANDARDS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.

EN 480:—Admixtures for concrete, mortar and grout. Testmethods

EN 480-13:2009Reference masonry mortar for testing mortaradmixtures

B/517/3

EN 609:—Agricultural and forestry machinery. Safety oflog splitters

EN 609-1:1999+A2:2009Wedge splitters

AGE/29

Documents Not Issued as DPCs continued...


CEN/TS 15923:2009Fertilizers. Extraction of phosphorus soluble inJoulie’s alkaline ammonium citrate

CII/37

CEN/TS 15924:2009Fertilizers. Determination of the fineness ofgrinding of soft natural phosphates

CII/37

CEN/TS 15925:2009Fertilizers. Extraction of total sulfur present invarious forms

CII/37

CEN/TS 15926:2009Fertilizers. Extraction of water soluble sulfurwhere the sulfur is in various forms

CII/37

CENELEC PUBLICATIONS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.

EN 50119:2009Railway applications. Fixed installations. Electrictraction overhead contact lines

GEL/9/3

EN 50366:—Household and similar electrical appliances.Electromagnetic fields. Methods for evaluationand measurement

INTERPRETATION SHEET 1:October 2009

to EN 50366:2003

CPL/61

EN 60061:—Lamp caps and holders together with gaugesfor the control of interchangeability and safety

EN 60061-1:—

(IEC 60061-1:1969/A42:2009)Lamp caps

AMENDMENT 42:October 2009

to EN 60061-1:1993

CPL/34/2

EN 60061-2:—

(IEC 60061-2:1969/A39:2009)Lampholders


to EN 60061-2:1993

CPL/34/2

EN 15779:2009Petroleum products and fat and oil derivates.Fatty acid methyl esters (FAME) for dieselengines. Determination of polyunsaturated (≥ 4 double bonds) fatty acidmethyl esters(PUFA) by gas chromatography

PTI/13

EN 15811:2009Agricultural machinery. Guards for moving partsof power transmission. Guard opening with tool

AGE/6

CEN REPORTS

CEN/TR 1749:2009European scheme for the classification of gasappliances according to the method ofevacuation of the combustion products (types)

GSE/-/4

CEN/TR 14383:—Prevention of crime. Urban planning andbuilding design

CEN/TR 14383-8:2009Protection of buildings and sites againstcriminal attacks with vehicles

B/562

CEN/TR 15917:2009Textiles. Cosmetotextiles

TCI/80

CEN/TR 15970:2009Pyrotechnic articles. Pyrotechnic articles forvehicles. Overview on work program forEN standards to be developed by CEN/TC212/WG 4

CII/47

CEN TECHNICALSPECIFICATIONS

CEN/TS 15606:2009Foodstuffs. Determination of acesulfame-K,aspartame, neohesperidine-dihydrochalconeand saccharin. High performance liquidchromatographic method

AW/-/3

CEN/TS 15919:2009Fertilizers. Extraction of phosphorus soluble in2% formic acid

CII/37

CEN/TS 15920:2009Fertilizers. Extraction of phosphorus soluble in2% citric acid

CII/37

CEN/TS 15921:2009Fertilizers. Extraction of soluble phosphorusaccording to Petermann at 65°C

CII/37

CEN/TS 15922:2009Fertilizers. Extraction of soluble phosphorusaccording to Petermann at ambienttemperature

CII/37

EN 3730:2009Aerospace series. Clamps, saddle fixed andsliding version in aluminium alloy with rubbercushioning. Dimension, masses

ACE/6

EN 3987:2009Aerospace series. Test methods for metallicmaterials. Constant amplitude force-controlledhigh cycle fatigue testing

ACE/61/-/6

EN 6059:—Aerospace series. Electrical cables, installation.Protection sleeves. Test methods

EN 6059-502:2009Resistance to electrical arcs

ACE/6

EN 12183:2009Manual wheelchairs. Requirements and testmethods

CH/173/1

EN 12184:2009Electrically powered wheelchairs, scooters andtheir chargers. Requirements and test methods

CH/173/1

EN 12342:1998+A1:2009Breathing tubes intended for use withanaesthetic apparatus and ventilators

CH/121/5

EN 13061:2009Protective clothing. Shin guards for associationfootball players. Requirements and testmethods

PH/3/11

EN 13448:2001+A1:2009Agricultural and forestry machinery. Inter-rowmowing units. Safety

AGE/32

EN 13544:—Respiratory therapy equipment

EN 13544-2:2002+A1:2009Tubing and connectors

CH/121/5

EN 13544-3:2001+A1:2009Air entrainment devices

CH/121/5

EN 14492:—Cranes. Power driven winches and hoists

EN 14492-2:2006+A1:2009Power driven hoists

MHE/3

EN 15080:—Extended application of results from fireresistance tests

EN 15080-8:2009Beams

FSH/22


EN 61987:—Industrial-process measurement and control.Data structures and elements in processequipment catalogues

EN 61987-10:2009

(IEC 61987-10:2009)Lists of properties (LOPs) for industrial-processmeasurement and control for electronic dataexchange. Fundamentals

AMT/7

EN 62149:—Fibre optic active components and devices.Performance standards

EN 62149-2:2009

(IEC 62149-2:2009)850 nm discrete vertical cavity surface emittinglaser devices

GEL/86/3

EN 62343:—Dynamic modules. Test methods

EN 62343-5-1:2009

(IEC 62343-5-1:2009)Dynamic gain tilt equalizer. Response timemeasurement

GEL/86/3

EN 62384:—

(IEC 62384:2006/A1:2009)D.C. or A.C. supplied electronic control gear forLED modules. Performance requirements

AMENDMENT 1:September 2009

to EN 62384:2006

CPL/34/3

EN 62424:2009

(IEC 62424:2008)Representation of process control engineering.Requests in P&I diagrams and data exchangebetween P&ID tools and PCE-CAE tools

GEL/65

HARMONIZATIONDOCUMENTS

CENELEC HD 60364:—Low-voltage electrical installations

CENELEC HD 60364-7-721:2009

(IEC 60364-7-721:2007)Requirements for special installations orlocations. Electrical installations in caravans andmotor caravans


JPEL/64

EN 60745:—Hand-held motor-operated electric tools. Safety

EN 60745-2-8:2009

(IEC 60745-2-8:2003/A1:2008)Particular requirements for shears and nibblers

CPL/116

EN 60745-2-9:2009

(IEC 60745-2-9:2003/A1:2008)Particular requirements for tappers

CPL/116

EN 60745-2-14:2009

(IEC 60745-2-14:2003/A1:2006)Particular requirements for planers

CPL/116

EN 60745-2-18:2009

(IEC 60745-2-18:2003/A1:2008)Particular requirements for strapping tools

CPL/116

EN 60745-2-20:2009

(IEC 60745-2-20:2003/A1:2008)Particular requirements for band saws

CPL/116

EN 60893:—Insulating materials. Industrial rigid laminatedsheets based on thermosetting resins forelectrical purposes

EN 60893-3-5:—

(IEC 60893-3-5:2003/A1:2009)Specifications for individual materials.Requirements for rigid laminated sheets basedon polyester resins


to EN 60893-3-5:2004

GEL/15/6

EN 61020:—Electromechanical switches for use in electricaland electronic equipment

EN 61020-1:2009

(IEC 61020-1:2009)Generic specification

EPL/23

EN 61202:—Fibre optic interconnecting devices and passivecomponents. Fibre optic isolators

EN 61202-1:2009

(IEC 61202-1:2009)Generic specification

GEL/86/2

EN 61280:—Fibre optic communication subsystem testprocedures

EN 61280-2-3:2009

(IEC 61280-2-3:2009)Digital systems. Jitter and wandermeasurements

GEL/86/3

EN 60061-3:—

(IEC 60061-3:1969/A40:2009)Gauges


to EN 60061-3:1993

CPL/34/2

EN 60061-4:—

(IEC 60061-4:1990/A12:2009)Guidelines and general information


to EN 60061-4:1992

CPL/34/2

EN 60335:—Household and similar electrical appliances.Safety

EN 60335-2-67:2009

(IEC 60335-2-67:2002/A1:2005)Particular requirements for floor treatment andfloor cleaning machines for commercial use

CPL/61/10

EN 60335-2-68:2009

(IEC 60335-2-68:2002/A1:2005/A2:2007)Particular requirements for spray extractionmachines for commercial use

CPL/61/10

EN 60335-2-69:2009

(IEC 60335-2-69:2002/A1:2004/A2:2007)Particular requirements for wet and dry vacuumcleaners, including power brush, for commercialuse

CPL/61/10

EN 60335-2-72:2009

(IEC 60335-2-72:2002/A1:2005)Particular requirements for automatic machinesfor floor treatment for commercial use

CPL/61/10

EN 60335-2-79:2009

(IEC 60035-2-79:2002/A1:2004/A2:2007)Particular requirements for high pressurecleaners and steam cleaners

CPL/61/10

EN 60601:—Medical electrical equipment

EN 60601-2-54:2009

(IEC 60601-2-54:2009)Particular requirements for the basic safety andessential performance of x-ray equipment forradiography and radioscopy

CH/62/2

EN 60728:—Cable networks for television signals, soundsignals and interactive services

EN 60728-1-2:2009

(IEC 60728-1-2:2009)Performance requirements for signals deliveredat the system outlet in operation

EPL/100

CENELEC Publications continued...


To order visit


IEC 60851:—Winding wires. Test methods

IEC 60851-2:2009

(Edition 3)

Determination of dimensions


GEL/55

IEC 60893:—Insulating materials. Industrial rigid laminatedsheets based on thermosetting resins forelectrical purposes

IEC 60893-3:—Specifications for individual materials

IEC 60893-3-6:—Requirements for rigid laminated sheets basedon silicone resins


to IEC 60893-3-6:2003


GEL/15/6

IEC 60893-3-7:—Requirements for rigid laminated sheets basedon polyimide resins


to IEC 60893-3-7:2003


GEL/15/6

IEC 60947:—Low-voltage switchgear and controlgear

IEC 60947-4-1:2009

(Edition 3)

Contactors and motor-starters.Electromechanical contactors and motor-starters


PEL/17/2

IEC 61000:—Electromagnetic compatibility (EMC)

IEC 61000-4-16:—Testing and measurement techniques. Test forimmunity to conducted, common modedisturbances in the frequency range 0 Hz to 150 kHz

AMENDMENT 2:July 2009

to IEC 61000-4-16:1998


GEL/210/12

IEC 61156:—Multicore and symmetrical pair/quad cables fordigital communications

IEC 61156-1:—Generic specification

AMENDMENT 1:August 2009

to IEC 61156-1:2007


EPL/46

IEC 60335-2-74:—Particular requirements for portable immersionheaters


to IEC 60335-2-74:2002


CPL/61/07

IEC 60364:—Low-voltage electrical installations

IEC 60364-1:—Fundamental principles, assessment of generalcharacteristics, definitions

CORRIGENDUM 1:August 2009

to IEC 60364-1:2005

JPEL/64

IEC 60401:—Terms and nomenclature for cores made ofmagnetically soft ferrites

IEC 60401-2:2009

(Edition 2)

Reference of dimensions


EPL/51

IEC 60436:—Electric dishwashers for household use.Methods for measuring the performance


to IEC 60436:2004


CPL/59/1

IEC 60502:—Power cables with extruded insulation and their accessories for rated voltages from 1 kV(Um = 1,2 kV) up to 30 kV (Um = 36 kV)

IEC 60502-1:—Cables for rated voltages of 1 kV (Um = 1,2 kV)and 3 kV (Um = 3,6 kV)


to IEC 60502-1:2004


GEL/20/16

IEC 60626:—Combined flexible materials for electricalinsulation

IEC 60626-2:2009

(Edition 3)

Methods of test


GEL/15

IEC 60819:—Non-cellulosic papers for electrical purposes

IEC 60819-1:2009

(Edition 3)

Definitions and general requirements


GEL/15

IEC PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following IEC publications areavailable from BSI Customer Services (see“How to order” on page 2)

IEC/TS 60034:—Rotating electrical machines

IEC/TS 60034-24:2009Online detection and diagnosis of potentialfailures at the active parts of rotating electricalmachines and of bearing currents. Applicationguide


PEL/2

IEC 60064:—Tungsten filament lamps for domestic andsimilar general lighting purposes. Performancerequirements

AMENDMENT 5:July 2009

to IEC 60064:1993


CPL/34/1

IEC 60079:—Explosive atmospheres

IEC 60079-29-1:—Gas detectors. Performance requirements ofdetectors for flammable gases

INTERPRETATION SHEET 1:July 2009

to IEC 60079-29-1:2007

GEL/31/19

IEC 60112:—Method for the determination of the proof andthe comparative tracking indices of solidinsulating materials

AMENDMENT 1:August 2009

to IEC 60112:2003


GEL/112

IEC 60335:—Household and similar electrical appliances.Safety

IEC 60335-2-59:—Particular requirements for insect killers


to IEC 60335-2-59:2002


CPL/61/01

IEC 60335-2-73:—Particular requirements for fixed immersionheaters


to IEC 60335-2-73:2006


CPL/61/07


ISO 289:—Rubber, unvulcanized. Determinations using ashearing-disc viscometer

ISO 289-1:—Determination of Mooney viscosity

CORRIGENDUM 1:January 2009

to ISO 289-1:2005

PRI/22

Will be implemented as an identical British Standard

ISO 787:—General methods of test for pigments andextenders

ISO 787-7:2009

(Edition 2)

Determination of residue on sieve. Watermethod. Manual procedure


STI/1


ISO/TR 1281:—Rolling bearings. Explanatory notes on ISO 281

ISO/TR 1281-1:—Basic dynamic load rating and basic rating life

CORRIGENDUM 1:October 2009

to ISO/TR 1281-1:2008

MCE/7


ISO/TR 1281-2:—Modified rating life calculation, based on asystems approach to fatigue stresses


to ISO/TR 1281-2:2008

MCE/7


ISO/IEC 1539:—Information technology. Programminglanguages. Fortran

ISO/IEC 1539-1:—Base language

CORRIGENDUM 4:September 2009

to ISO/IEC 1539-1:2004

IST/5

Will not be implemented as a British Standard

ISO 1629:—Rubber and lattices. Nomenclature

AMENDMENT 1:CORRIGENDUM 1:July 2009

to ISO 1629:1995

EPL/278


ISO 2470:—Paper, board and pulps. Measurement of diffuseblue reflectance factor

ISO 2470-1:2009Indoor daylight conditions (ISO brightness)


PAI/11


IEC/TR 62602:2009Conductors of insulated cables. Data for AWGand KCMIL sizes


GEL/20/16

IEC/TS 62610:—Mechanical structures for electronic equipment.Thermal management for cabinets inaccordance with IEC 60297 and IEC 60917 series

IEC/TS 62610-1:2009Design guide. Interface dimension andprovision for thermoelectrical cooling systems(Peltier effect)


EPL/48

IEC/TR 80002:—Medical device software

IEC/TR 80002-1:2009Guidance on the application of ISO 14971 tomedical device software


CH/62/1

ISO PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following ISO publications areavailable from BSI Customer Services (see“How to order” on page 2)

ISO 105:—Textiles. Tests for colour fastness

ISO 105-B08:—Quality control of blue wool reference materials1 to 7


to ISO 105-B08:1995


TCI/81


ISO 105-G02:—Colour fastness to burnt-gas fumes


to ISO 105-G02:1993

TCI/81


ISO 105-J03:2009

(Edition 2)

Calculation of colour differences


TCI/81


IEC 61156-8:—Symmetrical pair/quad cables with transmissioncharacteristics up to 1200 MHz. Work areawiring. Sectional specification

CORRIGENDUM 1:July 2009

to IEC 61156-8:2009

EPL/46

IEC 61753:—Fibre optic interconnecting devices and passivecomponents performance standard

IEC 61753-086-2:2009Non-connectorized single-mode bidirectional1490 / 1550 nm downstream and 1310 nmupstream WWDM devices for category C.Controlled environment


GEL/86/2

IEC 61754:—Fibre optic interconnecting devices and passivecomponents. Fibre optic connector interfaces

IEC 61754-24:2009Type SC-RJ connector family


GEL/86/2

IEC 61968:—Application integration at electric utilities.System interfaces for distribution management

IEC 61968-9:2009Interfaces for meter reading and control


PEL/57

IEC 62083:2009

(Edition 2)

Medical electrical equipment. Requirements forthe safety of radiotherapy treatment planningsystems


CH/62/3

IEC/TR 62271:—High-voltage switchgear and controlgear

IEC/TR 62271-301:2009

(Edition 2)

Dimensional standardisation of high-voltageterminals


PEL/17/1

IEC/TS 62443:—Industrial communication networks. Networkand system security

IEC/TS 62443-1-1:2009Terminology, concepts and models


GEL/65

IEC/TR 62443-3-1:2009Security technologies for industrial automationand control systems


GEL/65

IEC Publications continued...


ISO 7919-4:2009

(Edition 2)

Gas turbine sets with fluid-film bearings


GME/21/5


ISO 8196:—Milk. Definition and evaluation of the overallaccuracy of alternative methods of milk analysis

ISO 8196-1:2009

(Edition 2)

Analytical attributes of alternative methods


AW/5


ISO 8196-2:2009

(Edition 2)

Calibration and quality control in the dairylaboratory


AW/5


ISO 8196-3:2009Protocol for the evaluation and validation ofalternative quantitative methods of milkanalysis


AW/5


ISO 8612:2009

(Edition 2)

Ophthalmic instruments. Tonometers


CH/172/6


ISO/IEC 9594:—Information technology. Open SystemsInterconnection. The Directory

ISO/IEC 9594-2:—Models

CORRIGENDUM 1:December 2008

to ISO/IEC 9594-2:2005

IST/6


ISO/IEC 9798:—Information technology. Security techniques.Entity authentication

ISO/IEC 9798-3:—Mechanisms using digital signature techniques


to ISO/IEC 9798-3:1998

IST/33


ISO 6145:—Gas analysis. Preparation of calibration gasmixtures using dynamic volumetric methods

ISO 6145-9:2009

(Edition 2)

Saturation method


PTI/15


ISO 7404:—Methods for the petrographic analysis of coals

ISO 7404-2:2009

(Edition 2)

Methods of preparing coal samples


PTI/16


ISO 7404-3:2009

(Edition 3)

Method of determining maceral groupcomposition


PTI/16


ISO 7404-5:2009

(Edition 3)

Method of determining microscopically thereflectance of vitrinite


PTI/16


ISO 7919:—Mechanical vibration. Evaluation of machinevibration by measurements on rotating shafts

ISO 7919-2:2009

(Edition 3)

Land-based steam turbines and generators inexcess of 50 MW with normal operating speedsof 1500 r/min, 1800 r/min, 3000 r/min and 3600r/min


GME/21/5


ISO 3175:—Textiles. Professional care, dry cleaning and wetcleaning of fabrics and garments

ISO 3175-4:—Procedure for testing performance whencleaning and finishing using simulated wetcleaning


to ISO 3175-4:2003

TCI/82


ISO 3213:2009

(Edition 3)

Polypropylene (PP) pipes. Effect of time andtemperature on the expected strength


PRI/88/4


ISO 3907:2009

(Edition 3)

Hardmetals. Determination of total carbon.Gravimetric method


ISE/65


ISO 3908:2009

(Edition 3)

Hardmetals. Determination of insoluble (free)carbon. Gravimetric method


ISE/65


ISO 4049:2009

(Edition 4)

Dentistry. Polymer-based restorative materials


CH/106/1


ISO 4254:—Agricultural machinery. Safety

ISO 4254-6:2009

(Edition 2)

Sprayers and liquid fertilizer distributors


AGE/15


ISO 4427:—Plastics piping systems. Polyethylene (PE) pipesand fittings for water supply

ISO 4427-1:—General


to ISO 4427-1:2007

PRI/88/2


ISO Publications continued...


Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

ISO/TS 10303-1103:2008 (CD-ROM)

(Edition 2)

Application module. Product class


AMT/4


ISO/TS 10303-1104:2008 (CD-ROM)

(Edition 2)

Application module. Specified product


AMT/4


ISO/TS 10303-1106:2008 (CD-ROM)

(Edition 3)

Application module. Extended measurerepresentation


AMT/4


ISO/TS 10303-1109:2008 (CD-ROM)

(Edition 2)

Application module. Alternative solution


AMT/4


ISO/TS 10303-1110:2008 (CD-ROM)

(Edition 2)

Application module. Surface conditions


AMT/4


ISO/TS 10303-1111:2008 (CD-ROM)Application module. Classification withattributes


AMT/4


ISO/TS 10303-1112:2008 (CD-ROM)

(Edition 2)

Application module. Specification control


AMT/4


ISO/TS 10303-1115:2008 (CD-ROM)

(Edition 2)

Application module. Part collection


AMT/4


ISO/TS 10303-1129:2008 (CD-ROM)

(Edition 2)

Application module. External properties


AMT/4


ISO/TS 10303-1008:2008 (CD-ROM)

(Edition 2)

Application module. Layer assignment


AMT/4


ISO/TS 10303-1009:2008 (CD-ROM)

(Edition 2)

Application module. Shape appearance layers


AMT/4


ISO/TS 10303-1012:2008 (CD-ROM)

(Edition 2)

Application module. Approval


AMT/4


ISO/TS 10303-1022:2008 (CD-ROM)

(Edition 2)

Application module. Part and versionidentification


AMT/4


ISO/TS 10303-1025:2008 (CD-ROM)

(Edition 2)

Application module. Alias identification


AMT/4


ISO/TS 10303-1026:2008 (CD-ROM)

(Edition 2)

Application module. Assembly structure


AMT/4


ISO/TS 10303-1027:2008 (CD-ROM)

(Edition 3)

Application module. Contextual shapepositioning


AMT/4


ISO/TS 10303-1032:2008 (CD-ROM)

(Edition 3)

Application module. Shape property assignment


AMT/4


ISO/TS 10303-1040:2008 (CD-ROM)

(Edition 2)

Application module. Process propertyassignment


AMT/4


ISO/IEC 9798-4:—Mechanisms using a cryptographic checkfunction


to ISO/IEC 9798-4:1999

IST/33


ISO/IEC 9798-6:—Mechanisms using manual data transfer


to ISO/IEC 9798-6:2005

IST/33


ISO/IEC 9945:2009 (CD-ROM)Information technology. Portable OperatingSystem Interface (POSIX) Base Specifications,Issue 7


IST/5


ISO 10002:—Quality management. Customer satisfaction.Guidelines for complaints handling inorganizations


to ISO 10002:2004

SVS/0


ISO/TS 10303:—Industrial automation systems and integration.Product data representation and exchange

ISO/TS 10303-1001:2008 (CD-ROM)

(Edition 4)

Application module. Appearance assignment


AMT/4


ISO/TS 10303-1003:2008 (CD-ROM)

(Edition 3)

Application module. Curve appearance


AMT/4


ISO/TS 10303-1004:2008 (CD-ROM)

(Edition 4)

Application module. Elemental geometric shape


AMT/4


ISO/TS 10303-1007:2008 (CD-ROM)

(Edition 2)

Application module. General surfaceappearance


AMT/4



ISO/TS 10303-1314:2008 (CD-ROM)Application module. Mechanical design shadedpresentation


AMT/4


ISO/TS 10303-1316:2008 (CD-ROM)Application module. Camera view 3D


AMT/4


ISO/TS 10303-1317:2008 (CD-ROM)Application module. Procedural shape model


AMT/4


ISO/TS 10303-1318:2008 (CD-ROM)Application module. Procedural solid model


AMT/4


ISO/TS 10303-1319:2008 (CD-ROM)Application module. Solid with localmodification


AMT/4


ISO/TS 10303-1320:2008 (CD-ROM)Application module. Thickened face solid


AMT/4


ISO/TS 10303-1321:2008 (CD-ROM)Application module. Swept solid


AMT/4


ISO/TS 10303-1322:2008 (CD-ROM)Application module. Modified swept solid


AMT/4


ISO/TS 10303-1323:2008 (CD-ROM)Application module. Basic geometric topology


AMT/4


ISO/TS 10303-1324:2008 (CD-ROM)Application module. Non manifold surface


AMT/4


ISO/TS 10303-1248:2008 (CD-ROM)

(Edition 2)

Application module. Product breakdown


AMT/4


ISO/TS 10303-1275:2008 (CD-ROM)

(Edition 2)

Application module. External class


AMT/4


ISO/TS 10303-1291:2008 (CD-ROM)

(Edition 3)

Application module. Plib class reference


AMT/4


ISO/TS 10303-1308:2008 (CD-ROM)Application module. Picture representation


AMT/4


ISO/TS 10303-1309:2008 (CD-ROM)Application module. Drawing definition


AMT/4


ISO/TS 10303-1310:2008 (CD-ROM)Application module. Draughting element


AMT/4


ISO/TS 10303-1311:2008 (CD-ROM)Application module. Associative draughtingelements


AMT/4


ISO/TS 10303-1312:2008 (CD-ROM)Application module. Draughting elementspecialisations


AMT/4


ISO/TS 10303-1313:2008 (CD-ROM)Application module. Mechanical designgeometric presentation


AMT/4


ISO/TS 10303-1130:2008 (CD-ROM)

(Edition 3)

Application module. Derived shape element


AMT/4


ISO/TS 10303-1131:2008 (CD-ROM)

(Edition 3)

Application module. Construction geometry


AMT/4


ISO/TS 10303-1132:2008 (CD-ROM)

(Edition 2)

Application module. Associative text


AMT/4


ISO/TS 10303-1136:2008 (CD-ROM)

(Edition 3)

Application module. Text appearance


AMT/4


ISO/TS 10303-1206:2008 (CD-ROM)

(Edition 2)

Application module. Draughting annotation


AMT/4


ISO/TS 10303-1215:2008 (CD-ROM)

(Edition 2)

Application module. Physical breakdown


AMT/4


ISO/TS 10303-1216:2008 (CD-ROM)

(Edition 2)

Application module. Functional breakdown


AMT/4


ISO/TS 10303-1231:2008 (CD-ROM)

(Edition 2)

Application module. Product data management


AMT/4


ISO/TS 10303-1233:2008 (CD-ROM)

(Edition 2)

Application module. Requirement assignment


AMT/4




ISO/TS 10303-1715:2008 (CD-ROM)Application module. Part occurrence


AMT/4


ISO/TS 10303-1750:2008 (CD-ROM)Application module. Text representation


AMT/4


ISO/TS 10303-1753:2008 (CD-ROM)Application module. Value with unit extension


AMT/4


ISO/TS 10303-1760:2008 (CD-ROM)Application module. Pre defined product datamanagement specializations


AMT/4


ISO/TS 10303-1762:2008 (CD-ROM)Application module. Generic productoccurrence


AMT/4


ISO/TS 10303-1767:2008 (CD-ROM)Application module. Composite constituentshape


AMT/4


ISO/TS 10303-1768:2008 (CD-ROM)Application module. Composite material aspects


AMT/4


ISO/TS 10303-1770:2008 (CD-ROM)Application module. Part and zone laminatetables


AMT/4


ISO/TS 10303-1771:2008 (CD-ROM)Application module. Stock material


AMT/4


ISO/TS 10303-1772:2008 (CD-ROM)Application module. Ply orientationspecification


AMT/4


ISO/TS 10303-1509:2008 (CD-ROM)

(Edition 2)

Application module. Manifold surface


AMT/4


ISO/TS 10303-1514:2008 (CD-ROM)Application module. Advanced boundaryrepresentation


AMT/4


ISO/TS 10303-1628:2008 (CD-ROM)Application module. Design product datamanagement


AMT/4


ISO/TS 10303-1652:2008 (CD-ROM)Application module. Basic geometry


AMT/4


ISO/TS 10303-1654:2008 (CD-ROM)Application module. Characteristic


AMT/4


ISO/TS 10303-1655:2008 (CD-ROM)Application module. Chemical substance


AMT/4


ISO/TS 10303-1667:2008 (CD-ROM)Application module. Extended basic geometry


AMT/4


ISO/TS 10303-1672:2008 (CD-ROM)Application module. Fill area style


AMT/4


ISO/TS 10303-1681:2008 (CD-ROM)Application module. Generic material aspects


AMT/4


ISO/TS 10303-1702:2008 (CD-ROM)Application module. Manifold subsurface


AMT/4


ISO/TS 10303-1327:2008 (CD-ROM)Application module. Compound shaperepresentation


AMT/4


ISO/TS 10303-1329:2008 (CD-ROM)Application module. Elementary boundaryrepresentation


AMT/4


ISO/TS 10303-1330:2008 (CD-ROM)Application module. Presentation hierarchy


AMT/4


ISO/TS 10303-1331:2008 (CD-ROM)Application module. External source


AMT/4


ISO/TS 10303-1345:2008 (CD-ROM)

(Edition 3)

Application module. Item definition structure


AMT/4


ISO/TS 10303-1349:2008 (CD-ROM)

(Edition 2)

Application module. Incomplete data referencemechanism


AMT/4


ISO/TS 10303-1362:2008 (CD-ROM)Application module. Dimension and tolerancecallouts


AMT/4


ISO/TS 10303-1366:2008 (CD-ROM)

(Edition 2)

Application module. Tagged text representation


AMT/4


ISO/TS 10303-1369:2008 (CD-ROM)Application module. Binary representation


AMT/4




ISO 11277:2009

(Edition 2)

Soil quality. Determination of particle sizedistribution in mineral soil material. Method bysieving and sedimentation


EH/4


ISO/IEC 11770:—Information technology. Security techniques.Key management

ISO/IEC 11770-2:—Mechanisms using symmetric techniques


to ISO/IEC 11770-2:2008

IST/33


ISO/IEC 11770-3:—Mechanisms using asymmetric techniques


to ISO/IEC 11770-3:2008

IST/33


ISO/IEC 11770-4:—Mechanisms based on weak secrets


to ISO/IEC 11770-4:2006

IST/33


ISO 11865:2009

(Edition 2)

Instant whole milk powder. Determination ofwhite flecks number


AW/5


ISO 11870:2009

(Edition 2)

Milk and milk products. Determination of fatcontent. General guidance on the use ofbutyrometric methods


AW/5


ISO 12080:—Dried skimmed milk. Determination of vitaminA content

ISO 12080-1:2009

(Edition 2)

Colorimetric method


AW/5


ISO 10770:—Hydraulic fluid power. Electrically modulatedhydraulic control valves

ISO 10770-1:2009

(Edition 2)

Test methods for four-port directional flow-control valves


MCE/18/-/8


ISO 10816:—Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts

ISO 10816-2:2009

(Edition 3)

Land-based steam turbines and generators inexcess of 50 MW with normal operating speedsof 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min


GME/21/5


ISO 10816-4:2009

(Edition 2)

Gas turbine sets with fluid-film bearings


GME/21/5


ISO/TS 10891:—Freight containers. Radio frequencyidentification (RFID). Licence plate tag

CORRIGENDUM 1:April 2009

to ISO/TS 10891:2009

TW/1


ISO 11012:2009Heavy commercial vehicles and buses. Open-loop test methods for the quantification of on-centre handling. Weave test and transition test


AUE/15


ISO/TS 10303-1773:2008 (CD-ROM)Application module. Basic data representation


AMT/4


ISO/TS 10303-1775:2008 (CD-ROM)Application module. Currency


AMT/4


ISO/TS 10303-1776:2008 (CD-ROM)Application module. Extended date


AMT/4


ISO/TS 10303-1777:2008 (CD-ROM)Application module. External currency


AMT/4


ISO/TS 10303-1778:2008 (CD-ROM)Application module. External library


AMT/4


ISO/TS 10303-1779:2008 (CD-ROM)Application module. External representationitem


AMT/4


ISO/TS 10303-1780:2008 (CD-ROM)Application module. External unit


AMT/4


ISO/TS 10303-1782:2008 (CD-ROM)Application module. Qualified measure


AMT/4


ISO 10407:—Petroleum and natural gas industries. Rotarydrilling equipment

ISO 10407-2:—Inspection and classification of used drill stemelements


to ISO 10407-2:2008

PSE/17/-/4


ISO 10643:2009Dimensions of accessories for cutter arbors withparallel key and tenon drive


MTE/18




Help Us to Help

You!

Always quote your Customer Number

Don’t know your

number?

Contact

Customer Services

020 8996 9001

who will be happy to check it for you

ISO 17572:—Intelligent transport systems (ITS). Locationreferencing for geographic databases

ISO 17572-3:—Dynamic location references (dynamic profile)


to ISO 17572-3:2008

EPL/278


ISO/IEC 18000:—Information technology. Radio frequencyidentification for item management

ISO/IEC 18000-2:2009

(Edition 2)

Parameters for air interface communicationsbelow 135 kHz


IST/34

Will not be implemented as a British Standard. Is

approved as suitable for use in the UK

ISO 19338:—Performance and assessment requirements fordesign standards on structural concrete


to ISO 19338:2009

B/525/2


ISO 20022:—Financial services. UNIversal Financial Industrymessage scheme

ISO 20022-6:2009Message Transport Characteristics


IST/12


ISO/TR 20173:2009

(Edition 2)

Welding. Grouping systems for materials.American materials


WEE/36


ISO 20369:2009Material used for producing wrappings forcigarette filters, cigarettes and other tobaccoproducts. Determination of citrate content


AW/40


ISO 20370:2009Material used for producing wrappings forcigarette filters, cigarettes and other tobaccoproducts. Determination of acetate content


AW/40


ISO 15836:—Information and documentation. The DublinCore metadata element set


to ISO 15836:2009

IDT/2/7


ISO/TS 15926:—Industrial automation systems and integration.Integration of life-cycle data for process plantsincluding oil and gas production facilities

ISO/TS 15926-3:2008 (CD-ROM)Reference data for geometry and topology


AMT/4


ISO/TR 16268:2009Surface chemical analysis. Proposed procedurefor certifying the retained areic dose in aworking reference material produced by ionimplantation


CII/60


ISO/TS 16281:—Rolling bearings. Methods for calculating themodified reference rating life for universallyloaded bearings

CORRIGENDUM 1:April 2009

to ISO/TS 16281:2008

MCE/7


ISO/TS 16634:—Food products. Determination of the totalnitrogen content by combustion according tothe Dumas principle and calculation of thecrude protein content

ISO/TS 16634-2:2009Cereals, pulses and milled cereal products


AW/4


ISO 16852:—Flame arresters. Performance requirements, testmethods and limits for use


to ISO 16852:2008

FSH/23


ISO/IEC 17007:2009Conformity assessment. Guidance for draftingnormative documents suitable for use forconformity assessment


CAS/1


ISO 12080-2:2009

(Edition 2)

Method using high-performance liquidchromatography


AW/5


ISO 13320:2009Particle size analysis. Laser diffraction methods


LBI/37


ISO/TS 13606:—Health informatics. Electronic health recordcommunication

ISO/TS 13606-4:2009Security


IST/35


ISO 14378:2009

(Edition 2)

Milk and dried milk. Determination of iodidecontent. Method using high performance liquidchromatography


AW/5


ISO/IEC 14496:—Information technology. Coding of audio-visualobjects

ISO/IEC 14496-3:2009 (CD-ROM)

(Edition 4)

Audio


IST/37



ISO 14648:—Micrographics. Quality control of COMrecorders that generate images using a singleinternal display system

ISO 14648-2:—Method of use


to ISO 14648-2:2001

IDT/1/1


ISO/IEC 15444:—Information technology. JPEG 2000 imagecoding system

ISO/IEC 15444-4:—Conformance testing


to ISO/IEC 15444-4:2004

IST/37




ISO 28300:—Petroleum, petrochemical and natural gasindustries. Venting of atmospheric and low-pressure storage tanks


to ISO 28300:2008

PSE/17/-/6


ISO 28499:—Buffalo hides and buffalo calf skins

ISO 28499-1:2009Description of defects


TCI/69


ISO 28499-2:2009Grading on the basis of mass and size


TCI/69


ISO 28499-3:2009Grading on the basis of defects


TCI/69


ISO 30003:2009Ships and marine technology. Ship recyclingmanagement systems. Requirements for bodiesproviding audit and certification of shiprecycling management


SME/32


ISO 80601:—Medical electrical equipment

ISO 80601-2-56:2009Particular requirements for basic safety andessential performance clinical thermometers forbody temperature measurement


CH/121/5


ISO 24173:2009Microbeam analysis. Guidelines for orientationmeasurement using electron backscatterdiffraction


CII/9


ISO 24557:2009Pulses. Determination of moisture content. Air-oven method


AW/4


ISO/IEC 24739:—Information technology. AT attachment withpacket interface-7

ISO/IEC 24739-1:2009Register delivered command set, logical registerset (ATA/ATAPI-7 V1)


IST/6


ISO 24978:2009Intelligent transport systems. ITS safety andemergency messages using any availablewireless media. Data registry procedures


EPL/278


ISO 25518:2009Single-use rubber gloves for generalapplications. Specification


CH/205/3


ISO 26842:—Adhesives. Test methods for the evaluation andselection of adhesives for indoor wood products

ISO 26842-1:2009Resistance to delamination in non-severeenvironments


PRI/52


ISO 26842-2:2009Resistance to delamination in severeenvironments


PRI/52


ISO 28139:2009Agricultural and forestry machinery. Knapsackcombustion-engine-driven mistblowers. Safetyrequirements


AGE/15


ISO 20501:—Fine ceramics (advanced ceramics, advancedtechnical ceramics). Weibull statistics forstrength data


to ISO 20501:2003

RPI/13


ISO/TS 21220:2009Particulate air filters for general ventilation.Determination of filtration performance


MCE/21


ISO 21627:—Plastics. Epoxy resins. Determination of chlorinecontent

ISO 21627-1:2009

(Edition 2)

Inorganic chlorine


PRI/52


ISO 21627-2:2009

(Edition 2)

Easily saponifiable chlorine


PRI/52


ISO 21627-3:2009

(Edition 2)

Total chlorine


PRI/52


ISO 21987:2009Ophthalmic optics. Mounted spectacle lenses


CH/172/3


ISO 22514:—Statistical methods in process management.Capability and performance

ISO 22514-1:2009General principles and concepts


SS/4


ISO/IEC 23003:—Information technology. MPEG audiotechnologies

ISO/IEC 23003-1:— (CD-ROM)MPEG surround

AMENDMENT 2:CORRIGENDUM 1:October 2009

to ISO/IEC 23003-1:2007

IST/37





To order visit
