brother filtration offers reduced system footprint, up to 50% smaller than competitively sized...
TRANSCRIPT
Design Features
Brother Filtration FRP housings are designed for
a variety of industry applications. We offer side
and end connection models and we also offer
custom-designed housing cartered to customer’s
engineering specifications.
Why Brother Filtration Filter?
• Easy installation and maintenance
• FRP housing designed for corrosion resistant
• High chemical resistance
• Designed for compact use and small footprint
• Modular Design
Competitive Investment
Brother Filtration FRP systems utilize performance engineered FRP housings designed for corrosion resistant that potentially reduce your capital start-up costs over typical steel vessels by up to 50%.
Low Maintenance Costs
Advanced pleated filter material design delivers good filtration efficiency and performance. The increased surface of the media provides longer element life, which means fewer change outs. Reduced filter consumption results in minimized disposal, operator exposure and downtime.
Ease of Use
We’ve eliminated the need for heavy equipment,
such as cranes to open vessel doors or remove
cumbersome baskets. Access to the filtration elements
requires virtually no tools.
• Easy-to-remove, tool-less retaining ring • Convenient handle on the cover plate
• Ergonomic handle on the element for easy
entry and exit
• Guided tabs for quick element access
and precision alignment
Compact Design Than Other Competitors
Offers reduced system footprint, up to 50% smaller
than competitively sized housings.
Applications
• Pretreatment
• RO Prefiltration
• Seawater desalination
• Condensate water filtration
• Hot water recovery in power generation
• API, Solvents, and water filtration in
Biopharma market
• Bottled water filtration
• High fructose, edible oil, soft drinks and milk
• Paints and coatings
• Petrochemical and Refineries
• Microelectronics, Film, Fiber and resin
www.esli.com.tr
Brother Filtration
Max-A High Flow FRP Cartridge System
Max-Flow Purification Systems
MAX-A SERIES DIFFERANTIAL PRESSURE vs FLOWRATE
MAX-A SERIES DIFFERANTIAL PRESSURE vs FLOWRATE
Designed to provide optimum filtration while significantly reducing
operating costs and offering overall energy and cost savings.
• Increased energy savings
• 20inch one-piece design hard cage for better integrity
• Infrared ray ultra-high temp thermal welding for stronger connection and pressure resistance
• Significantly lower installation costs
• Lower operating costs
• High loading capacity
• Two handle design ease of installation and maintenance
• Longer life span
High Flow Cartridge Filter
High Flow Cartridge
Pleated Cartridge
Depth Cartridge
Advantage of Max-A High Flow FRP Cartridge System
MAX-A
HF CARTRIDGE
MODEL
EFFECTIVE
MEMBRANE
AREA (m2)
FLOW RATE CARTRIDGE
FILTRATION
EFFICIENCY Max flow
rate (m3/hour)
Recommend flow rate (m3/hour)
LENGTH
(mm)
STRUCTURE
BF-HFA-60 8 113 50 1524 7- layer 99,10 %
BF-HFA-40 5.3 75 33 1016 7- layer 99,10 %
BF-HFA-20 2.66 38 17 508 7- layer 99,10 %
Side-Connected Model Brother Filtration Max-Flow FRP system is designed for filtration system technologies. We respond to market
needs and requirements by paying attention to critical applications, cartridge filter care and protection.
It offers high quality, while offering lower capital investment and operating costs in a small footprint. Our
innovative proprietary design allows for easy and fast maintenance for minimum downtime that ensure your
systems run continuously.
SYSTEM SPECIFICATION
Element Type Max-A High Flow Cartridge System
Micron Ratings 01, 05, 10 & 20 Micron Nominal/Absolute
Diameter of Cartridge 6inch/152 mm
Length 60inch, 40inch, 20inch
Suggested Pressure Drop
for Element Replacement
1.5 bar
Max. Temperature ~70℃
Flow Direction of Filter System End in, side out
Flow Direction of Filter Cartridge Inside-Out
FRP
HOUSING
MODEL CONNECTION MAX. PRESSURE
FILTER HOUSING
LENGTH DIAMETER
MF 80-150S-60 3” coupling 150 Psi / 10 Bar 1860 mm 800 mm
MF 80-150S-40 3” coupling 150 Psi / 10 Bar 1350 mm 800 mm
MF 80-150S-20 3” coupling 150 Psi / 10 Bar 792 mm 800 mm
Max-A High Flow FRP Cartridge System
MATERIALS
HOUSING
Shell FRP
End caps ABS
End cap handle Stainless steel 304
Inlet ABS
Side port outlet Nylon
Locking segment Stainless steel 304
Saddle Rubber
CARTRIDGE
Media (membrane) Polypropylene/Glass Fiber
Supporting layer Polypropylene
Seal EPDM/Silicone/Viton/Buna-N
Inner frame/Core Polypropylene
Lifting Handles Polypropylene
Outer Cage Polypropylene
ACCESSORIES
ITEM NO. NAME QUANTITY
① O-ring 4
② Locking Kit Segments 6
③ End Cap (Handle Side) 1
④ End Cap (Insert Side) 1
⑤ Thrust Ring 1
⑥ Guiding Frame 1
⑦ Saddle 2
⑧ Strap 2
⑨ Couplings 2
⑩ Short Tube 2
Remarks: ①-⑧ Free Accessories, ⑨-⑩ Additional Options
CARTRIDGE FILTER AND HOUSING CONSTRUCTION MATERIALS & ACCESSORIES
Professional Design of Max-A High Flow FRP Cartridge System
Brother Filtration has a professional and experienced technical team to help our customer choose fittest products, recommend design solution, offer graph drawing as well as OEM services Besides, Brother Filtration keep improving and offering innovative NEW products to meet different clients’ requirements
Make The Right Choice
Brother Filtration
Understanding
your water
application and
the importance
of using health,
chemical free
water is the first
step towards
healthier living.
Finding the right
water filtration
systems for your
application is the
next step.
Food & Agriculture
Chemical & Petrochemical
Biotech & Pharmaceutical
Industrial
www.brotherfiltration.com [email protected]
How to Install Max-A High Flow FRP Cartridge System?
Before cartridge installation, put the Guiding
Frame onto cartridge Step 1: Insert HF Cartridge from Inlet
Step 2: Insert Inlet End Cap with O-ring and
Install Locking Kit Segments
Step 3 & 4: Insert Thrust Ring from the Other
Side FRP Housing
Step 5: Insert Closed End Cap with O-ring
Step 6: Install Locking Kit Segments
For later cartridge change-outs
Open from the Closed side End Cap