building buzz - june newsletter
DESCRIPTION
The official monthly newsletter of the Bismarck-Mandan Home Builders AssociationTRANSCRIPT
Bismarck-Mandan Home Builders Association
Building Buzz Professionals building our community through promotion of home ownership, education and legislation since 1958.
Mark Your Calendars! The Annual Picnic will be June 14 at the Post in Mandan. There will be a silent auction, 50/50 drawing and lots of good food!
The Annual PAC Golf Tournament will be July 19 at Apple Creek Country Club. Participation is limited, so get your team signed up early! The Annual Sporting Clay Shoot will be August 23 at Capital City Sporting Clays Shooting Complex.
If you would like more information about these events or to register, contact the HBA office at 222-2400.
Inside This Issue
Permit Report 2
President’s Letter 3
Calendar of Events 4
2012 New Members 4
Membership Highlight 5 Les Mowing
News & Events 6-7 Congratulations Spring Parade of Homes Winners Summer Event Update
Get Out & Vote 8
National News 9
NDAB News 10
HBA News from Around the State 11
June 2012 Issue 6
www.bmhba.com
Page 2 Bismarck-Mandan Home Builders Association Building Buzz
Building Buzz Publisher/Editor Roxanne Jacobson
Layout Editor/Writer Chelsea Gleich
Published by the Bismarck-Mandan Home Builders Association
2600 Gateway Ave. Suite 1, Bismarck, ND 58503
Phone: 701.222.2400 Fax: 701.250.9730 Like Us! www.facebook.com/bmhba Follow Us! www.twitter.com/bmhba
Bismarck Permit Report Through April 2012 Bismarck/Burleigh permit reports are available online at: www.bismarck.org
Permit Type YTD 2011 YTD 2012
YTD New Residential
Single Family Detached
Single Family Attached
Duplex
3 or 4 Unit
5+ Unit
YTD Residential Garages
YTD New Commercial
YTD Alter Public
177/$46.1M
126/$22.53M
36/$4.98M
3/$.89M
10/$5.66M
2/$12.04M
19/$.183M
23/$5.91M
3/$.048M
63/$10.78M
57/$9.92M
6/$.856M
0/$0M
0/$0M
0/$0M
8/$.073M
19/$3.06M
5/$2.33M
YTD New Residential
Single Family
Duplex
Condos
Apartments
YTD Remodel and Additions
YTD New Commercial
YTD Alter Commercial
50/$14.38M
44/$10.94M
0/$0M
4/$.862M
2/$2.58M
34/$.416M
6/$.312M
13/$.552M
24/$7.04M
18/$4.63M
1/$1.17M
4/$.737M
1/$.500M
40/$.575M
0/$0M
7/$.065M
Permit Type YTD 2011 YTD 2012
Mandan Permit Reports are available online at: www.cityofmandan.com
Scan to visit the website: bmhba.com
Mandan Permit Report Through April 2012
Morton County Permits Only Report at Year End
GET OUT AND VOTE JUNE 12!
As I sit down to write my President’s message this month after a long day, it is already a day past due. I had every intention of writing it some
time ago. However, as is the case all too often lately, my days just got away from me. I know
that many of you are experiencing the same.
The housing demand in our community has been a great blessing, and we would be remiss to characterize it as anything else. It has allowed our industry to expand and new jobs and businesses are being created every day. However, it has come with a price. Many of our members are small business owners. In our roles we struggle to retain our employees, maintain our schedules and our sanity. These efforts result in a lot of long days and self-evaluation. We ask ourselves if we are making the most of our resources and if we should expand or even change our business model altogether to take advantage of this opportunity. We all must answer these questions in our own way. I really don’t have much advice to give because I am also trying to answer these questions for myself. Nevertheless, someone once said that anything worth doing is worth doing right. I encourage each of you to make sure that whatever you create, you create to the best of your abilities. When I am in big cities, I like to look at new or existing homes. More often than not, I am disappointed with the lack of quality and attention to detail in the homes I visit. I have always believed that homes shouldn’t be built on a production line and I know that sort of workmanship would not be
tolerated in our community. We have reached a time of such high demand that I believe expectations are starting to change. People are primarily concerned with having a place to live and the move in date has become almost as important as the home itself. I have always believed that our actions during the good times will define us in the bad. Although we all believe that the housing market will be sustained for at least the foreseeable future, I would encourage each of us to set our standards high and stick to it, regardless of whether or not our work will be tolerated.
I would also like to encourage each of you to keep a little part of that candle, which is currently burning at both ends, for your family or whatever makes you happy. The old saying that you “make hay while the sun shines” still has a lot of truth in it. However, the farmer is pretty useless if his tractor is broken down due to lack of service. Once again, I give advice not because I have figured this out for myself, but because it is something that I think about frequently. Fortunately, I have a wife who is very tolerant, but I try not to abuse her patience. I think we all assumed that the pace we were running after the flood last year wouldn’t be sustained, but with what we have seen over the past
year and with the forecast of housing demand in the foreseeable future, we have to consider that this a marathon and not a sprint.
The BMHBA has scheduled several events this summer over what would be an otherwise perfectly good working day. We have the Annual Picnic at The Post in Mandan, coming up on June 14, which is technically at night. There is also the Annual PAC Golf Tournament July 19 at Apple Creek Country Club. If you are like myself and find that you look around to see if anyone is laughing in your follow through, then perhaps you will appreciate the use of a less precise weapon in the BMHBA Clay Shoot on August 23. Whatever you choose to do with your free time, I wish you all the best of luck in finding your own balance and look forward to working with you along the way.
Building Buzz Bismarck-Mandan Home Builders Association Page 3
A Word from Our President: Finding Balance Amidst the Chaos
Chad Moldenhauer
President, BMHBA
Page 4 Bismarck-Mandan Home Builders Association Building Buzz
Calendar of Events June 14 Annual Picnic—The Post
June 26 BMHBA Board Meeting
July 19 Annual PAC Golf Tournament—Apple Creek Country Club
July 24 BMHBA Board Meeting
August 23 Sporting Clay Shoot—Capital City Sporting Clays
August 28 BMHBA Board Meeting
September 25 BMHBA Board Meeting
September 27-30 Fall Parade of Homes
*All Board Meetings are held at the BMHBA Office
PRESIDENT Chad Moldenhauer K & L Homes, Inc. PO Box 7188 Bismarck, ND 58501 Phone: (701) 258-4584
PAST PRESIDENT Scott Duchsherer Prairie Aire Homes 843 Longhorn Drive Bismarck, ND 58503 Phone: (701) 258-5733
SECRETARY/TREASURER Minda Lloyd ND Guaranty & Title Co. 201 4th Ave. NW Mandan, ND 58554 Phone: (701) 663-5362
BOARD MEMBER Paula Haider Haider Glass Specialties 1717 Commerce St. Ste. A Bismarck, ND 58504 Phone: (701) 250-6787
BOARD MEMBER C. J. Schorsch Fleck’s Furniture & Appliance 313 East Main Ave. Bismarck, ND 58501 Phone: (701) 323-0891
2012 Board of Directors 1ST VICE PRESIDENT Eric Brenden Northwest Contracting 3420 E Century Ave. Bismarck, ND 58503 Phone: (701) 255-7727
2ND VICE PRESIDENT Vance Vetter Vance Vetter Construction 2500 Railroad Ave., Unit A Bismarck, ND 58501 Phone: (701) 751-8218
BOARD MEMBER Scott Moran Hallmark Homes 7404 Moonlite Rd. Bismarck, ND 58503 Phone: (701) 471-7634
BOARD MEMBER Mike Hopfauf Hopfauf Custom Builders PO Box 425 Mandan, ND 58554 Phone: (701) 663-7691
BOARD MEMBER Greg Zenker Ferguson Enterprises 2817 37 Street NW Mandan, ND 58554 Phone: (701) 663-2446
2012 New Members We would like to thank our new members for joining us and welcome them to the association. We look forward to helping them build their businesses and build our community. The 2012 new members are:
AME Coatings Anyleaks, Inc.
Arrow Service Team Blend Home Design
Boulder Homes Bremer Bank Dove Painting
Fireside Custom Homes
G & J Awning & Canvas
GR-8 Builders Granite Creations
Hunt Construction Mind Over Material
Mr. Squeegee Window Cleaning
Prairie Supply, Inc. Satellites Plus Service Master
Professional Services Specials Delivery
Structural Materials Titan Machinery
Weisz & Sons, Inc.
Building Buzz Bismarck-Mandan Home Builders Association Page 5
Membership Highlight Who Wouldn’t Like Les Mowing? Owner Says He Wants More Les Mowing Kiel Holwegner, Owner Phone: 701-471-0353 [email protected]
What’s your goal when you hire a lawn care company? Typically, less mowing for you to do. And that is exactly what Les Mowing, a lawn care company owned by Kiel Holwegner, offers you. Using a clever play on words with his middle name, Kiel came up with the company name Les Mowing.
Kiel started Les Mowing earlier this year when his uncle wanted to get out of the lawn care business. Kiel was able to purchase all of his equipment and take on his previous clients.
Les Mowing offers general lawn care services—including power raking, mowing and fall/spring clean-up.
When asked what he enjoys about his job, Kiel said he enjoys being his own boss, getting to be outside and forming relationships with his clients.
While Kiel is a relatively new
business owner, he says his years of work in the service industry give him perspective. He recognizes that customer service is number one regardless of the field you are in.
According to Kiel, his biggest challenges so far have been keeping to the clients’ tight schedules and offering consistency based on the individual client’s requests.
Les Mowing offers residential
and commercial lawn care services and is always looking for more work.
If you’d like to learn how Kiel can help you do less mowing, call (701) 471-0353 or email [email protected].
Kiel Holwegner, Owner/Operator of Les Mowing
Good Food, Good Fun at Annual Picnic Coming Up June 14
At the request of the membership, registration for the Annual PAC Golf Tournament will be out soon. We are just finalizing hole sponsors. This year’s tournament will be held at Apple Creek Country Club. The tournament will begin at 11 a.m. and will conclude with dinner in the clubhouse.
As always, participation is limited to 144 golfers. There has been a lot of interest already, so if you’d like to participate sign up soon after you
receive the registration forms. Don’t forget, when registering for
the tournament, that home addresses for each golfer are required as the participation fees are essentially donations to NDAB Build-PAC (political action committee) and must come from an individual instead of a company.
We’re hoping for good weather and a great turn-out. Be on the lookout for more information in the near future!
Page 6 Bismarck-Mandan Home Builders Association Building Buzz
BMHBA News and Events
The Annual Member Picnic is set for June 14 at The Post in Mandan. The picnic begins at 6 p.m. and you receive two free tickets per membership. Each additional ticket is $15.
This night is known to be tons of
fun, with delicious food, free drinks, door prizes, 50/50 drawing and silent auction to benefit the BSC Scholarship fund.
We are still accepting silent auction items and door prizes. If you are interested in donating, please
contact the office at 222-2400. Thanks in advance to our
generous sponsors: Kupper Chevrolet, Capital Electric Cooperative, Front Street Millwork & Lumber and Starion Financial.
Hope to see you all there!
Apple Creek Hosts Annual PAC Golf Tournament July 19
Capital City Sporting Clays Shooting Complex will host the Sporting Clay Shoot again this year. Mark your calendars for Thursday, August 23. As always, the event will conclude with a catered picnic out at the course and the distribution of prizes!
The cost per shooter is $50. Registration will begin at 3:30 p.m. with start at 4 p.m.
Registration information will be available in August. For more information, contact the office at 222-2400.
Don’t Shoot! Sporting Clay Shoot August 23
Want to advertise to 400+ potential
customers in your industry?
Want to boost your name
recognition in the community?
Advertise Here! Email [email protected] or call
222-2400 for more info.
Building Buzz Bismarck-Mandan Home Builders Association Page 7
Congratulations to our Spring Parade of Homes Winners! People’s Choice Winners
Judge’s Choice Winners
$190,000-$249,900
Boulder Homes
$250,000-$299,900
MK Home Builders, Inc. 3308 Chisholm Trail
$340,000-$389,900
Prairie Aire Homes, Inc. 4406 Silica Place
$390,000-$429,900
Majestic Homes 3113 Clairmont Rd.
$300,000-$339,900
Red Door Homes 5206 Boulder Ridge Rd.
$430,000-$499,900
K & L Homes, Inc. 3101 Promontory Dr.
$500,000 & Up
Triton Homes 2729 Powder Ridge Dr.
$190,000-$249,900
Scott D. Berger Const. 1304 15th St. SE
$250,000-$299,900
K & L Homes, Inc. 3605 Chevelle Circle
$340,000-$389,900
Michael Baumgartner Const. 6719 Prairie Sage Place
$390,000-$429,900
Majestic Homes 3113 Clairmont Rd.
$300,000-$339,900
Red Door Homes 5206 Boulder Ridge Rd.
$430,000-$499,900
K & L Homes, Inc. 3101 Promontory Dr.
$500,000 & Up
Triton Homes 2729 Powder Ridge Dr.
Page 8 Bismarck-Mandan Home Builders Association Building Buzz
You Can Have an Impact: Get Out & Vote June 12 Mark your calendars for the primary election on June 12. While called a primary election, this election is much more than a
congressional primary. On the ballot will be Measures 1-4,
city commission and mayoral races, park board, school board, various judges, Bismarck city and school district measures, as well as party voting for national and state congressional candidates.
If you are a Morton County resident, visit dakotamediaaccess.org and click on GATV to see candidate forums for Mandan City Commission, Mandan Mayor, Mandan School
Board and Morton County Commission.
We all want to be informed voters. To see a sample ballot for your area, find your polling place, and read the exact wording of the measures, visit www.nd.gov/sos/electvote.
If you’re currently living out of state or are unable to get to your polling place on election day, make sure to apply for an absentee/mail ballot. How to apply can be found in the Voter Information portal on the secretary of state’s website as listed above. Just make sure to return your ballot before election day so your vote will be counted.
There are some items on the ballot that could make a big impact on our state, including Measure 2. As part of the coalition to oppose Measure 2 (Keep It Local ND), we understand the importance of keeping funding control local—and believe that the
residents of our communities are those best suited to make decisions regarding those communities.
“A ‘No’ vote on Measure 2 is not saying you are in favor of property taxes; it is merely saying that you do not believe Measure 2 is the correct way to go about property tax relief. We believe writing it into our state constitution is too drastic and too difficult to change if the method the legislature devises to fund local entities does not work, “ said Roxy Jacobson, BMHBA Executive Officer and coalition representative. For more information on Keep It Local ND, visit their website at www.keepitlocalnd.com.
We encourage you all to educate yourselves on the issues/candidates and get out and vote. It could make a big difference in our communities and our state.
Building Buzz Bismarck-Mandan Home Builders Association Page 9
NDSU Extension offers Energy Matter$ Training By Carl Pedersen, NDSU Extension
Ask a prospective homeowner how much insulation he or she should have in the attic, and you get a curious stare or shrug of the shoulders. But ask the same prospective homeowner what kind of countertops he or she wants, and you get a definite opinion.
While the appearance of a home is certainly important, the performance is as important, if not more so. However, buyers often overlook the latter.
The North Dakota State University Extension Service is working to educate homebuyers and homeowners about energy efficiency and that the performance of their home does matter.
In a survey the University of North Dakota conducted for the North Dakota Alliance for Renewable Energy, only 3 percent of North Dakotans surveyed indicated energy efficiency had little or no importance to them. Meanwhile, research conducted at NDSU showed a different story.
During interviews, professional builders, Realtors and homebuyers indicated the purchase price of homes was one of the first few items of importance when considering a home purchase, but the monthly utility bills were not much of a
concern. Realtors and builders also noted that clients do not inquire about the monthly utility costs.
One of the builders responded, “I haven’t been asked that question.” When homebuyers were asked if monthly utility bills were important in their home purchase, one responded, “I haven’t really thought about that very much.”
Considering the extreme climate we have in North Dakota and the chance to save money by purchasing an energy-efficient home, those of us involved in educating the general public about all the benefits of purchasing a high-quality, energy-efficient home have a great opportunity. Professional builders can benefit as well. Proper building science in the construction of a home adds to customer satisfaction, reduces callbacks and increases the potential for return business; we simply need to educate the homebuyer.
Various programs to increase consumers’ knowledge include the Energy Matter$ lunch and learn the NDSU Extension Service held May 22nd in Bismarck. The aim was to provide attendees with some of the tools to understand the balance between the economic, basic building science and how energy is used in a home, as well as ways to reduce energy use.
Other programs NDSU Extension has developed include a consumer-based online informational course that includes short video segments showing ways to improve the energy efficiency of existing homes and various aspects of energy-efficient new-home construction. The course, “Home Energy 101,” can be accessed at www.NDSU.edu/energy.
NDSU Extension also uses its expertise to provide education and training for professionals in the construction industry. In the spring of 2011, NDSU Extension conducted a series of workshops to introduce energy aspects of the 2009 North Dakota State Building Codes that were adopted by the state in January 2011.
In the spring of 2012, NDSU Extension focused training on basement insulation techniques. Those efforts included in-person workshops as well as creating DVDs and online videos that demonstrate the building science fundamentals of insulating basements and provide some examples from builders on ways they insulate basements. A limited number of the DVDs are available for loan at the Bismarck-Mandan HBA offices. The videos also can be accessed by visiting www.NDSU.edu/energy and clicking on the Energy Code Training tab.
SmartMarket Report Released: Quality & Value Driving Growth in Green Building Market
According to the SmartMarket Report from McGraw-Hill Construction released May 1, new and remodeled green homes are transforming the market in the U.S.
The top reasons cited for the growth of the green market were the fact that green homes are seen as having higher quality construction and that they save consumers money.
“When builders are able to offer homes that are not only green, but
also offer the combination of higher quality and better value, they have a major competitive edge over those building traditional homes,” said Harvey Bernstein, Vice President of Industry Insights and Alliances at McGraw-Hill Construction.
The SmartMarket report, produced by McGraw-Hill Construction in conjunction with NAHB and Waste Management, is designed to provide key insights into product and market
opportunities in the single-family home building and remodeling industries. It is backed by proprietary research surveys and the power of the McGraw-Hill Construction Dodge database.
To download your free copy of the entire report visit, http://analyticsstore.construction.com and search “SmartMarket Report: Green Homes.”
Page 10 Bismarck-Mandan Home Builders Association Building Buzz
Page 11 Building Buzz Bismarck-Mandan Home Builders Association
2600 Gateway Ave. Ste. 1 Bismarck, ND 58503
PRSRT STD U.S. Postage
PAID
Permit #72 Bismarck, ND
58501
Wholesale to Trade3700 E Divide | Bismarck, ND 58501 | 701.223.4307 | 800.298.0644 | www.fabricatorssupply.net
→ 7944-01 Madagascar
/Fabsupply
COMING SOON...
3700 E Divide, Bismarck, ND 58501 701.223.4307 | 800.298.0644www.fabricatorssupply.net
→ 7933K-07 Cafelle/Fabsupply
Wilsonart Contract Launch: June 2012The colors and designs of this year's launch have a distinctive, urban quality. There is a layering of ideas, materials, and eras in much of interior design. And there has been a shift to a younger generation at design firms, and a rebirth of fun, retro, graphic approach to design.
NEW TEXTURESoft Grain #12:
The Modern Woodgrain
Soft grain #12 finish is a low gloss, matte wood texture with a slight
gloss in random "ticks" which helps this finish come to life when
you walk past it. The look and feel or real veneer supports more
casual looks found in industrial chic and rustic glam
WO
ODG
RAIN
S
7964K-12 Skyline Walnut 7965K-12 Walnut Heights 7968K-12 Loft Oak 7969K-12 Warehouse Oak
7966K-12 5th Ave Elm 7967K-12 Park Elm 7970K-12 High Line 7971K-12 Uptown Walnut
QUALITY • SERVICE • SELECTION • VALUE
Sale Prices and Free Offers Expire 6-30-12 Unless Otherwise Specified Or While Supplies Last. We Reserve The Right To Correct Errors and Limit Quantities and Terminate Any Offer At Anytime.
Offer Valid on Purchase made April 1, 2012 through June 30, 2012
*FREE Battery with qualifying purchase of Makita LXDT01,
LXD211 or LXT 218.Offer Valid on Purchase made
through June 30, 2012
18V LXT Li-Ion Multi Tool
Model LMXT02Z
Purchase Select LXT Tool Kits And Get A FREE LXT Bare Tool. A $99.00 Value. Mail In Offer Expires 8/31/12 Or While Supplies Last.
18V LXT Li-Ion Recip Saw
Model BJR182Z
18V LXT Li-IonCut Off
Angle GrinderModel BGA452Z
18V LXT Li-Ion6-1/2 In.
Circular SawModel BSS611Z
18V LXT Li-Ion Cordless
Impact DriverModel LXDT04Z
18V LXT Li-Ion1/2 In. Hammer
Drill/DriverModel BHP454Z
18V LXT Li-Ion Hammer Drill/Driverand Impact Driver KitModel LXT218
18V LXT Li-Ion 1/4” Impact Driver KitModel BTD141
18V LXT Li-Ion Hammer Drill/Driverand Impact Driver KitModel LXT211
18V LXT Li-Ion 1/2 In. Hammer Drill/Driver KitModel BHP454
18V LXT Li-Ion Cordless Multi Tool KitModel LXMT025
BUY
THIS
GET
TH
ISCh
oose
Fro
m 6
Too
ls
FREEBare ToolMail In
Specials • Close-Outs • New Product UpdatesSince 1948Bismarck • 3840 E Rosser Ave.701-258-1267 • 800-472-2640
Mon-Fri 7-5:30 • Sat 8-5:30Also Located In Minot, Fargo and Grand Forks
9 Locations To Serve You in ND, MN And IA!
1-1/2 In. STRAPSHOT™ MetalConnector Nailer Kit
Model MCN150 SALE $209.99
WAS $219.99 SAVE $10• 1-1/2” fastener length• 80-120 PSI; 29 nail capacity• Exposed nail tip for precise applicationIncludes: Case
GTA3800 Miter Saw Stand ...................................................................$249.99T4B Gravity Rise Miter Saw Stand ...................................................299.99
12 In. Dual Bevel Glide Miter Saw Includes FREE 96T 12” Carbide Blade (PRO1296VFBF). A $119 Value! Limited Quantities At This Price.
Model GCM12SDK SALE $769.99
WAS $799.99 SAVE $30• 15 Amp motor; 3,800 RPM• 4” speed track sliding fences• 21” base with cast sliding extensions
Includes: 60T blade, wrenches, work clamp and dust bag
TS2000 Gravity-Rise™ Wheeled Table Saw Stand ................$199.99TS1002 Rear Outfeed Support Extension .................................34.99CB1060 10” 60T Carbide Blade.................................................39.99
10 In. Worksite Table Saw with Premium Fence, Guard and StandIncludes FREE 60T Carbide Blade (CB1060F) A $39.99 Value! Limited Quantities At This Price.
Model 4100-09K SALE $599.99
WAS $629.99 SAVE $30 • 15 Amp, 4.4 Hp motor• SquareLock™ rip fence• Cutting rail extends to a full 25” rip capacity• Gravity-Rise™ wheeled stand Includes: 40T blade, rip fence, miter gauge, smart guard system, push stick and stand
Xtreme™ 1 In. SDS Plus® Rotary Hammer Kit
Model 11255VSR SALE $209.99
WAS $239.99 SAVE $30• 7.2 Amps, 0-1,300 RPM, 0-5,800 BPM• Three operational modes: hammer only, rotation only, hammer and rotationIncludes: Side handle, depth gauge and case
11264EVS 1-5/8” SDS Max® Combination Hammer .............. $599.9911263EVS 1-3/4” SDS Max® Rotary Hammer with Case ......... 689.99
VS SDS-Max® Demolition Hammer Kit
Model 11316EVS SALE $749.99
WAS $789.99 SAVE $40• 14 Amp motor; 900-1,890 BPM• Front handle rotates 360° and pivots front to back for maximum comfort• Vario-Lock™ rotates and locks chisel in 12 positionsIncludes: Side handle and case
11224VSR 7/8” SDS Rotary Hammer Kit ..........................................$189.99
1-5/8 In. Spline Combination Hammer KitIncludes FREE Hammer Drill (11224VSRF). A $189.99 Value. While Supplies Last.
Model 11265EVSK SALE $579.99
WAS $599.99 SAVE $20• 13 Amps, 170-340 RPM; 1,700-2,900 BPM• Active Vibration Control™• One hand tool free SDS-Max® bit changes• 2 modes: rotary and hammer or hammer onlyIncludes: Side handle and case
FREE!
3-1/4 In. Full Head
Model NR83A2 SALE $319.99
WAS $329.99 SAVE $10• 2” to 3-1/4” range; Full round head nails• Top load magazine; 64-70 nail capacity• Steel magazine• Depth of drive adjustmentIncludes: Safety glasses and wrenches
2 In. 16 Gauge Construction Stapler
Model N5008AC2 SALE $229.99
WAS $249.99 SAVE $20 • 1” to 2” range; 7/16” crown • Top load magazine; 157 staple capacity • Quick clear nose with tool less jam release Includes: Safety glasses and wrenches
1-3/4 In. Coil Roofing Nailer
Model NV45AB2 SALE $279.99
WAS $299.99 SAVE $20• 7/8” to 1-3/4” range; Wire collated roofing nails• Side load magazine; 120 nail capacity• Depth of drive adjustment• Used for fastening fiberglass and asphalt shingles
Includes: Safety glasses and wrenches
2-1/2 In. Coil Siding Nailer Kit
Model N66C-1 $269.99
• 1-1/4” to 2-1/2” fastener length range • 70-120 PSI; 350 nail capacity • Adjustable depth control Includes: Case
3.6V 16 Gauge Gas Finish Nailer Kit
Model GFN1664K SALE $229.99
WAS $269.99 SAVE $40• 1”- 2-1/2” fastener length range; 100 capacity• Tool free depth control; Low nail lock outIncludes: Li-Ion battery, wall charger,
car charger and case
18V XRP™ 18 Gauge 2 In. Brad Nailer Kit
Model DC608K $279.99
• 5/8” to 2” fastener range; 110 nail capacity • Sequential mode for precision placing and bump mode for mass production speed Includes: 18V 2.4Ah XRP™ battery, charger, belt hook, no mar tip, glasses and case
18V XRP™ 16 Gauge 20˚ Angled Finish Nailer Kit
Model DC618K $349.99
• 1-1/4”-2-1/2” fastener length range• 120 nail capacity; 20˚ angled magazine• Sequential mode for precision placing and bump mode for mass production speedIncludes: 2.4Ah XRP™ battery, charger, belt hook, no mar tip, glasses and case
Heavy Duty Palm Nailer
Model D51180 $89.99
• 6d to 16d fastener capacity• 70 - 120 PSI operating pressure • Magnetic tip for easy nail placement • 1/4” fitting for hose attachment Includes: Leather grip and safety glasses