bus ticket automation.doc

8/22/2019 Bus Ticket Automation.doc

1/3

Bus Ticket Automation

Aim: To design and develop a microcontroller based system using

which displays the to and fro stations and the fare for the same.

BLOCK DAIG:-

Bus Ticket Automation

Working:

This automated project should be used in each bus since it is

very cost-effective and reduces the burden of the passengersas well as the conductors. Keys are been assigned to each

station. The source station and destination stations are entered

using a 4X4 matrix keypad and the fare for the same is

displayed on the LCD. When the key for the source station is

pressed, microcontroller reads the EEPROM and displays the

corresponding station on the LCD, then the key for

MICROCONTROLLERKeypad_

4x4

Matrix

LCD

POWER

SUPPLY

BUZZER


2/3

destination station is pressed which is again displayed on the

LCD. After a few seconds, the fare for the source and

destination is displayed which is again read from the

EEPROM. This project can be modified by adding RTC and

printer to it, so that a ticket can be printed with the stations,

current time and fare.

The system contains following modules;

1. Microcontroller

2. LCD

3. Keypad4. Serial EEPROM

1. Microcontroller

Microcontroller is the electronic device which contains processing

Power, memory and IO ports to interact with different connected

devices. It is responsible for reading the stations according to the

keys pressed and also reading the fare from the same.

2. LCD

LCD displays the source station and the destination station and

also the required fare.

3. Keypad

Different keys are assigned to different stations. When the source

and destination station keys are pressed, LCD displays the fare for

the same.

4. Serial EEPROM

Serial EEPROM is used to store different stations and fares which

is read by the microcontroller after each key press.


3/3

Automatic bus announcer support LED displayAutomatically bus announcerMetal box more strong

Gps Bus Announcer

Features

1. Report bus station information ,advertisement or music(the voice downloaded into

SD card) automatically

2. Change voices easily by SD card reader connectiong to computer

3. Memorize the bus-line voice information up to 99 routes,two directions in each

line,maximal support 80 stations in each direction

4. Support all kinds of language report and LED Display

5. Voice message can be changed easily in SD card6. For the buses running on the same line,SD card data can be copied to other buses

from the one which already obtained the data by once practicaldriving

7. Up-Line/Down-Line Switch automatically

8. Eight levels adjustable volume

Specificatios

1 Operating Voltage DC12V to 24V

2 Standby Current

bus ticket automation.doc

Documents