Download - Bus Ticket Automation.doc
-
8/22/2019 Bus Ticket Automation.doc
1/3
Bus Ticket Automation
Aim: To design and develop a microcontroller based system using
which displays the to and fro stations and the fare for the same.
BLOCK DAIG:-
Bus Ticket Automation
Working:
This automated project should be used in each bus since it is
very cost-effective and reduces the burden of the passengersas well as the conductors. Keys are been assigned to each
station. The source station and destination stations are entered
using a 4X4 matrix keypad and the fare for the same is
displayed on the LCD. When the key for the source station is
pressed, microcontroller reads the EEPROM and displays the
corresponding station on the LCD, then the key for
MICROCONTROLLERKeypad_
4x4
Matrix
LCD
POWER
SUPPLY
BUZZER
-
8/22/2019 Bus Ticket Automation.doc
2/3
destination station is pressed which is again displayed on the
LCD. After a few seconds, the fare for the source and
destination is displayed which is again read from the
EEPROM. This project can be modified by adding RTC and
printer to it, so that a ticket can be printed with the stations,
current time and fare.
The system contains following modules;
1. Microcontroller
2. LCD
3. Keypad4. Serial EEPROM
1. Microcontroller
Microcontroller is the electronic device which contains processing
Power, memory and IO ports to interact with different connected
devices. It is responsible for reading the stations according to the
keys pressed and also reading the fare from the same.
2. LCD
LCD displays the source station and the destination station and
also the required fare.
3. Keypad
Different keys are assigned to different stations. When the source
and destination station keys are pressed, LCD displays the fare for
the same.
4. Serial EEPROM
Serial EEPROM is used to store different stations and fares which
is read by the microcontroller after each key press.
-
8/22/2019 Bus Ticket Automation.doc
3/3
Automatic bus announcer support LED displayAutomatically bus announcerMetal box more strong
Gps Bus Announcer
Features
1. Report bus station information ,advertisement or music(the voice downloaded into
SD card) automatically
2. Change voices easily by SD card reader connectiong to computer
3. Memorize the bus-line voice information up to 99 routes,two directions in each
line,maximal support 80 stations in each direction
4. Support all kinds of language report and LED Display
5. Voice message can be changed easily in SD card6. For the buses running on the same line,SD card data can be copied to other buses
from the one which already obtained the data by once practicaldriving
7. Up-Line/Down-Line Switch automatically
8. Eight levels adjustable volume
Specificatios
1 Operating Voltage DC12V to 24V
2 Standby Current