V8211_03

145.00 mm

210.0

0 m

m

2016-12-26 new 版本1

vacuum cleaner

vacuum cleaner

TMTI HELPLINE 0345 604 0105If you still require further assistance, call one of our experts on

0345 604 0105

3

6

10

14

16

17

2021

22

24

vacuum cleaner

vacuum cleaner

vacuum cleaner

Ready?Let's begin

Accessories

First use of vacuum cleaner.

Using the vacuum cleaner

Cleaning

Technical specification

Care and maintenance

Toubleshooting

Help and assistance

Declaration of conformance to product

Standards

Disposal

Unpacking

Assembly 14

12

25

26

27

Electrical 8

Care and maintenance

6

WARNINGS

This appliance is intended for domestic household use only and should

not be used for any other purpose or in any other application, such as

for non-domestic use or in a commercial environment.

If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualified persons in order to avoid a hazard.

Regarding the detailed instructions for the method and frequency of

cleaning and the precautions during user maintenance, refer to the

section “Care and maitenance” on page 20 of the manual.

This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and

understand the hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without

supervision.

0345 604 0105

7

The plug must be removed from the socket-outlet before cleaning or

maintaining the appliance.

Following objects are strictly banned, otherwise the vacuum cleaner will

be damaged or fire calamity will be caused, which bring such accidents as

human body injuries:

-Don't pick up large or sharp broken such as

glasses.

-Don't pick up harming or erodent liquids (solvent,

corrosive, detergent…).

-Don't pick up inflammable or explosive substance

such as gasoline or alcohol.

-Don't pick up/ vacuum burning or glowing

objects (cigarettes, matches, hot ashes).

Electrical

!

8

vacuum cleaner

10

Vacuum cleaner

vacuum cleaner

vacuum cleaner

1.Cleaning head

2.Telescopic tubes

3.Tube socket

4.Dust container

5.Dust release button container

6.Power button

0345 604 0105

11

Vacuum cleaner

vacuum cleaner

Components

Model no

V8211_03

Specification

230V 50/60Hz 600W

Annual energy consumption

A

Hard floor

C

Carpet

E

Dust re-emission class

F

12 vacuum cleaner

1.Telescopic tubes

2.Tube socket

3.Dusting brush

4.Crevice tool

5.Cleaning head

1 2

3

4 5

Accessories

vacuum cleaner

2. Insert telescopic tube into the tube socketat the front of the cleaner until you hear a click.

4. Attach the cleaning head to the end of the telescopic tube.

To remove the cleaning head and tubes, hold each piece tightly and pull firmly apart.

To remove the from the cleaner, tube socketwhilst keeping the release tube socketbutton pressed, pull the out of the tube socketfront of the cleaner and then release the button.

ASSEMBLYAlways disconnect the appliance from the mains socket beforeassembling or disassembling accessories.

14

Lightweight Bagless Vacuum cleaner

Unpacking

1. First connect the tube socket with unit .

vacuum cleaner

3. Push forward the switch on the telescope tube.Pull the tube to desired length.Then release the switch to lock the telescope tubein place

5. Assemble of part is completed.You can use the product

vacuum cleaner

vacuum cleaner

First use of vacuum cleaner

CAUTION： Always switch off the vacuum cleaner before connecting or

disconnecting the hose/atlachments or removing and emptying the dirt

container.

IMPORTANT： The vacuum cleaner is equipped with a thermal cut-out. If for any

reason the vacuum deaner does overheat. the thermostat will automatically turn

the vacuum cleaner off. If this happens ,switch the vacuum cleaner off and unplug

from electrical socket. Remove and empty the dirt container also check the

vacuum deaner for blockages. Allow the vacuum cleaner to cool for

approximately 1 hour (if you have cleaned the filters ,please wait 24 hours for the

filters to fully dry before putting back into the machine).

16 Using your vacuum cleaner

OperationPlug the appliance into the mains socket.

Press the power button on top of the appliance

to switch on the appliance.

With handheld feature, you can clean from

floor to ceiling.

Remove the cleaning head from the tubes then attach the crevice tool to the tubes. You can also attach the crevice tool directly to the front ofthe cleaner until a click is heard. The crevice toolis used for narrow gaps and hard-to-reach places. Use this crevice tool to vacuum down the side of cushions, corners, edges or small spaces.

Use the dusting brush by attaching it to the crevice tool to clean more delicate surfaces, e.g. curtains.

Advanced functions/use

Using on wall/curtains

Using on carpet/floor brush

Use on the stairs

This machine can be used on stairs.just connect accessories:tube socket,crevice tool and dusting brush

Position1: Bristles extended

for hard floors

Position2:Bristles retracted

for carpets

0345 604 0105

17Using your vacuum cleaner

Using the vacuum cleaner

CleaningAlways switch off the appliance and unplug from the mains socket before carrying out any maintenance or cleaning.Clean the outside of the appliance with a damp cloth. Dry thoroughly before use. Never immerse the appliance in the water. Do not use abrasive or chemical cleaning agents.

Empty the Dust ContainerEmpty the dust container when the dust reaches the MAX line.Failure to do this will impair the efficiency of the cleaner.

3. After empty the container,close the cover until the click sound created from the latch is heard.

1. Press the dust release container button to remove the dust container.

2. Hold the dust over a bin container and then push the latch downward

to open the cover on the bottom of the dust to allow the dust fall out to bin.

20

Leave it to dry for 24 hours or until fully

Cleaning the HEPA Filter The high efficiency particulate air (HEPA) filter is an effective system in removing almost all indoor pollutants, dust mites, pollen and mould spores.

1. Pull the clip on the dust lid outward to remove the lid.

2. Hold the handle of the HEPA filter to rotate it anticlockwise and remove it.

3.

4. Rotate the filter housing anticlockwise and remove it out of the dust

5.

6. Place the filter housing into the dust and turn it clockwise until it locks into position.7. Place the filter in the housing and then turn it clockwise until it locks into position.8. Replace the dust lid onto the dust . 9. Attach the dust back to the appliance until a click is heard.

Filters require cleaning at least every 3-6 months(depending on the level of use). Don't use your vacuum cleaner without all the filters in place.

container

Tap the HEPA filter over a bin to remove the dust.

Wash the filter under water (max. 40 degree). DO NOT USE DETERGENTS to clean all parts.

dry before placing back in the vacuum cleaner. container

container containercontainer

container.

0345 604 0105

21

Care and maitenance

Technical Specifications

22

Model Number

Voltage

Energy efficiency class

Annual energy consumption

Carpet cleaning performance class

Hard floor cleaning performance class

Dust re-emission class

Sound power level

Rated input power

V8211_03

220-240V~50/60Hz

A

24.4kWh/annum

E

C

F

80dB(A)

600W

TROUBLESHOOTING Please check the following details before you have your appliance repaired by an authorised servicing agent.

24

1. Vacuum cleaner does not work.

You can check if the power plug is firmly inserted into the power outlet.

And if the power switch of the appliances is on.

2. Suction power becomes weak.

You can check if the brush or tube is clogged or damaged . Or check if the

dust container is full or check if the filter is clogged and if the tubes are

correctly attached. The possible solution is to immediately remove the

obstruction. Or empty the dust container or clean the filter or reassemble

the tubes.

3. Vacuum cleaner is overheating

You can check if the filter is blocked. The possible solution is to clean the filter.

4. Dust is coming out of the vacuum cleaner

You can check if the dust container is properly fitted to the cleaner. The

possible solution is to refit the dust container to the cleaner.

0345 604 0105

25

wash vacuum cleaner

0345 604 0105

Help and assistance

2014/35/EU low voltage directive2014/30/EU the EMC directive2011/65/EU the ROHS directive

26

This is a class ll appliance.

0345 604 0105

27

0345 604 0105