cabinet, meter & dome lamps - betts...
TRANSCRIPT
39
Cabinet, Meter & Dome Lamps
PART NO. CABINET/METER/DOME SHALLOW LENS
570025 Clear, valox body incandescent bulb without switch
570325 Clear, valox body, Multi-voltage single diode LED without switch570344 Clear, valox body, Multi-voltage single diode LED with switch
PART NO. CABINET/METER/DOME DEEP LENS
570026 Clear, valox body incandescent bulb with switch
570326 Clear, valox body, Multi-voltage single diode LED with switch570342 Clear, valox body, Multi-voltage single diode LED without switch
3.500
3.250 x 4.062OVAL
(2) .187 DIA. HOLES3.625 ON CENTER
A dome, meter or cabinet lamp in a valoxbody. Lamps are available in both incandes-cent and LED versions. Incandescent ver-sions feature either a 920115 clear shallowlens, 920367 socket with a 67 bulb or a920111 clear deep lens, 920367 socketand a 1141 bulb. LED versions featureeither a 510055 clear shallow LED lensassembly or a 510056 clear deep LED lensassembly. A 920078 3 amp toggle switch isonly available in the deep lens incandescentbulb version but available in both shallowand deep LED versions.
Bodies must be drilled or tapped for wire orcable entry unless otherwise specified.
Sealed Beam flood lamps feature a par 36 style bulb available in both incandescent and LED versions. The bulb is held in place with aEPDM retaining ring with the same snap seal o ring sealing characteristics used in all Betts lighting. Bulb versions use a clear 4466 floodand a 920234 retaining grommet, LED’s use a 920775 LED bulb and a 920734 retaining grommet. This retaining grommet is differentthan the incandescent version due to the shape of the LED bulb. For additional bulb protection on the incandescent bulb versions a 920071retaining grommet has been extended to allow a 920143 clear shallow lens that provides additional protection from bulb breakage. Thisextended retaining grommet is not available in the LED version. All direct replacements for aluminum body lamps feature a ground strapthat utilizes the body as a ground.
Also available mounted in 920731 flush mount angled casting to give a 30 degree down and out illuminated viewing area when backing up.
Bodies must be drilled and tapped for wire or cable entry.
Sealed Beam Work Lamps
1.7501.656
4.750 DIA.HOLE REQ'D.
5.875DIA.
(4) .187 DIA. HOLESON 5.437 BOLT CIRCLE
3.968
5.875DIA. 5.125
DIA.
1.750
(4) .187 DIA. HOLESON 5.437 BOLT CIRCLE
4.750 DIA.HOLE REQ'D.
PART NO. SEALED BEAM FLOOD, SPOT, AND WORK LAMPS
400044 Clear, valox body incandescent bulb, flood400092 Clear, valox body incandescent bulb, flood with ground strap400072 Clear, valox body incandescent bulb with extended grommet and lens, flood400094 Clear, valox body incandescent bulb with extended grommet and lens, flood with ground strap400094 Clear, valox body incandescent bulb with extended grommet and lens, flood with ground strap400544 Clear, valox body LED flood
400072 shown450533 shown
CONTINUED ON NEXT PAGE
40
1.843 1.562
5.500DIA.
4.500 DIA.HOLE REQ'D.
(3) .187 DIA. HOLESON 4.875 BOLT CIRCLE
3.968
5.500DIA. 5.125
DIA.
1.562
4.500 DIA.HOLE REQ'D.
(3) .187 DIA. HOLESON 4.875 BOLT CIRCLE
3.343
5.875DIA.
(4) .187 DIA. HOLESON 5.437 BOLT CIRCLE
CONTINUED FROMPREVIOUS PAGE
PART NO. SEALED BEAM FLOOD, SPOT AND WORK LAMPS
450033 Clear, valox body incandescent bulb, flood450102 Clear, valox body incandescent bulb, flood with ground strap450063 Clear, valox body incandescent bulb with extended grommet and lens, flood450112 Clear, valox body incandescent bulb with extended grommet and lens, flood with ground strap
450533 Clear, valox body LED flood
PART NO. SEALED BEAM INCANDESCENT BLUB, FLOOD SPOT AND WORK LAMPS
470025 Clear, valox body
470525 Clear, valox body LED flood
PART NO. SEALED BEAM FLOOD, SPOT, AND WORK LAMPS
404000 Clear, valox body incandescent bulb, flood with 920420 wire choke seal with 920728 casting404001 Clear, valox body incandescent bulb, flood with 920420 wire choke seal and 18 inch pigtails with 920728 casting
404002 Clear, valox body LED bulb, flood with 920420 wire choke seal with 920728 casting404003 Clear, valox body LED bulb, flood with 920420 wire choke seal and 18 inch pigtails with 920728 casting
6.135
4.644BACK VIEW
404002 shown
450533 shown 450063 shown
Sealed Beam Work Lamps
41
Sealed Beam Work Lamps
PART NO. WORKLIGHT WITH (1) LEAD WIRE REGULAR GROMMET
315001 Clear, sealed beam flood315003 Clear, sealed beam flood with 920039 20 amp toggle switch
315005 Clear, halogen spot315007 Clear, halogen spot with 920039 20 amp toggle switch
315501 Clear, LED flood315503 Clear, LED flood with 920078 3 amp toggle switch
PART NO. FLOOD WITH (2) LEAD WIRES REGULAR GROMMET
325001 Clear, sealed beam flood325003 Clear, sealed beam flood with 920039 20 amp toggle switch
325005 Clear, halogen spot325007 Clear, halogen spot with 920039 20 amp toggle switch
325501 Clear, LED flood325503 Clear, LED flood with 920078 3 amp toggle switch
PART NO. WORKLIGHT WITH (1) LEAD WIRE EXTENDED GROMMET
315009 Clear, sealed beam flood315010 Clear, sealed beam flood with 920039 20 amp toggle switch
315011 Clear, halogen spot315012 Clear, halogen spot with 920039 20 amp toggle switch
PART NO. WORKLIGHT WITH (2) LEAD WIRES EXTENDED GROMMET
325009 Clear, sealed beam flood325010 Clear, sealed beam flood with 920039 20 amp toggle switch
325011 Clear, halogen spot325012 Clear, halogen spot with 920039 20 amp toggle switch
Sealed Beam flood lamps feature a par 36 style bulb available in both incandescent and LED versions. The bulb is held in place withan EPDM retaining ring with the same Snap Seal o ring sealing characteristics used in all Betts lighting. Bulb versions use a clear4466 flood or a H7616 halogen spot and a 920234 retaining grommet, LED’s use a 920775 LED bulb and a 920734 retaininggrommet. This retaining grommet is different than the incandescent version due to the shape of the LED bulb.
For additional bulb protection on the incandescent bulb versions a 920071 retaining grommet has been extended to allow a 920143clear shallow lens that provides additional protection from bulb breakage. This extended retaining grommet is not available in the LEDversion. Lamp bodies are powder coated aluminum.
Lamps feature both horizontal and vertical rotation.
Available in either a (1) abrasion resistant lead wire for body grounding or a (2) abrasion resistant lead wires for internal or commongrounding.
3.71 2.59 3.11 2.90
4.00
4.94
(2) .312 DIA. HOLES4.00" ON CENTER
8.65
2.34 2.903.59 2.59
4.004.94
(2) .312 DIA. HOLES4.00" ON CENTER
8.65
2.34 2.903.59 2.59
4.004.94
(2) .312 DIA. HOLES4.00" ON CENTER
Also available inwhite or black
Also available inwhite or black
42
PART NO. 13/16 MOUNTING STUD, REGULAR GROMMET
800014 Clear, sealed beam flood800015 Amber, sealed beam flood800018 Clear, sealed beam flood with 920039 20 amp toggle switch
800514 Clear, LED flood800518 Clear, LED flood with 920078 3 amp toggle switch
PART NO. 9/16 MOUNTING STUD, REGULAR GROMMET
800016 Clear, sealed beam flood800017 Amber, sealed beam flood
800516 Clear, LED flood
PART NO. 13/16 MOUNTING STUD, EXTENDED GROMMET
800019 Clear, sealed beam flood800020 Amber, sealed beam flood800023 Clear, sealed beam flood with 920039 20 amp toggle switch
PART NO. 9/16 MOUNTING STUD, EXTENDED GROMMET
800021 Clear, sealed beam flood800022 Amber, sealed beam flood
PART NO. ADJUSTABLE STUD MOUNT, REGULAR GROMMET
805001 Clear, sealed beam flood805002 Amber, sealed beam flood805003 Clear, sealed beam flood with 920039 20 amp toggle switch805005 Clear, sealed beam flood with 920420 wire choke seal installed805006 Amber, sealed beam flood with 920420 wire choke seal installed805021 Clear, halogen spot805022 Clear, halogen spot with 920039 20 amp toggle switch
805501 Clear, LED flood805503 Clear, LED flood with 920078 3 amp toggle switch 805505 Clear, LED flood with 920420 wire choke seal installed
PART NO. ADJUSTABLE STUD MOUNT, EXTENDED GROMMET
805011 Clear, sealed beam flood805012 Amber, sealed beam flood805013 Clear, sealed beam flood with 920039 20 amp toggle switch805014 Clear, sealed beam flood with 920420 wire choke seal installed805015 Amber, sealed beam flood with 920420 wire choke seal installed805025 Clear, halogen spot805026 Clear, halogen spot with 920039 20 amp toggle switch
4.875 DIA. 3.156
5.531
1.312
Work lights are available in either a standard fixed pedestal mount or an adjustable pedestal mount. Pedestal mountsealed beam lamp with either a 9/16” or 13/16” mounting stud. Lamps use a 4466 clear flood, H7616 clear halo-gen spot, 4415A amber sealed beam held in place with a 920234 retaining grommet. LED lamps using a 920775LED flood use a 920734 retaining grommet. Lamps come equipped with a abrasion resistant 18 inch pigtail.Adjustable pedestal mount lamps use a 9/16” mounting stud. All mounting hardware is included with lamps.
For additional bulb protection on the incandescent bulb versions a 920071 retaining grommet has been extended toallow a 920143 clear shallow lens that provides additional protection from bulb breakage. This extended retaininggrommet is not available in the LED version. Lamp bodies are powder coated aluminum.
Note: LED light utilizes a different retaining grommet than traditional PAR 36 lights due to shape of bulb.
5.125 3.718
5.656
1.312
4.875 DIA.
6.781
1.500
3.156
5.125 DIA.
6.906
1.500
3.718
Also available inwhite or black
Also available inwhite or black
Also available inwhite or black
Also available inwhite or black
Sealed Beam Work Lamps
Note: All lamps available in gray, white or black powder coating.