caldwell 4710biv 4710biv-l spec sheet 2017 en...- csa z8000 shipping cube 3.5 gw 57 lbs ¨ 4610afv...

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. TO BE SPECIFIED Colour: n Soft White CANADA 5970 CHEDWORTH WAY, UNIT B, MISSISSAUGA. ONTARIO, CANADA L5R 4G5 | CONTRAC.CA USA 6241 NORTHWIND PARKWAY, HOBART, INDIANA, USA 46342 | CONTRAC.US REVISED JULY 2019 HYGIENIC SINK 20" WALL MOUNT SINK WITH SHROUD PRODUCT SPECS - Vitreous china with Micropolish Glaze - Single hole faucet drilling - Built-in backsplash - Offset drain located at backward position to avoid direct fall of water stream - No overflow, to prevent contamination - Slanted deck, to prevent water pooling - Mounting hardware supplied - For concealed arm carrier (provided by others) installation - Acrylic shroud leg included - Faucet not included DIMENSIONS 515mm W x 465mm D x 595mm H 20¼" W x 18¼" D x 23⅜" H COMPLIANCE CERTIFICATIONS Meets or exceeds the following: - IAPMO cUPC - ASME A112.19.2 / CSA B45.1 - CSA Z8000 SHIPPING Cube 3.5 GW 57 lbs ¨ 4610AFV Single Hole with Shroud 330mm (13") 320mm (12½") 595mm (23⅜") 71mm (2¾") 60mm (2⅜") 260mm (10¼") 275mm (10⅞") 10mm (⅜") FRONT VIEW CARRIER ARM HOLES x2 Ø60mm (2⅜") 415mm (16⅜") BACK VIEW 155mm (6⅛") 320mm (12½") 95mm (3¾") 105mm (4⅛") 220mm (8⅝") 100mm (4") MOUNTING HOLES x2 Ø10mm (⅜") MOUNTING HOLES x2 Ø16 x 22mm (⅝" x ⅞") 515mm (20¼") 465mm (18¼") 375mm (14¾") 190mm (7½") ARM LOCKING HOLES x6 Ø25mm (1") Ø35mm (1⅜") 92mm (3⅝") 130mm (5⅛") 110mm (4⅜") 115mm (4½") 415mm (16⅜") Ø68mm (2⅝") Ø43mm (1⅝") 110mm (4⅜") NOTE: CSA Z8000 requires a sink installation height of 34". (31" - 34") 842mm - 865mm 260mm (10¼") 72mm (2⅞") 60mm (2⅜") 230mm (9") (11⅜") 290mm (4¾") 120mm Min (3⅞") 98 mm FINISHED FLOOR FINISHED WALL

Upload: others

Post on 21-Oct-2020

6 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

TO BE SPECIFIED

Colour:n Soft White

C A N A DA 5970 CHEDWORTH WAY, UNIT B, MISSISSAUGA. ONTARIO, CANADA L5R 4G5 | CONTRAC.CAU S A 6241 NORTHWIND PARKWAY, HOBART, INDIANA, USA 46342 | CONTRAC.US

REVISED JULY 2019

HYGIENIC SINK20" WALL MOUNT SINK WITH SHROUD

PRODUCT SPECS- Vitreous china with Micropolish Glaze

- Single hole faucet drilling

- Built-in backsplash

- O�set drain located at backward position to avoid direct fall of water stream

- No overflow, to prevent contamination

- Slanted deck, to prevent water pooling

- Mounting hardware supplied

- For concealed arm carrier (provided by others) installation

- Acrylic shroud leg included

- Faucet not included

DIMENSIONS515mm W x 465mm D x 595mm H

20¼" W x 18¼" D x 23⅜" H

COMPLIANCE CERTIFICATIONSMeets or exceeds the following:

- IAPMO cUPC

- ASME A112.19.2 / CSA B45.1

- CSA Z8000

SHIPPINGCube 3.5

GW 57 lbs

¨ 4610AFV Single Hole with Shroud

330mm (13")

320mm(12½")

595mm(23⅜")

71mm (2¾")

60mm(2⅜")260mm

(10¼")

275mm(10⅞")

10mm (⅜")

FRONT VIEW

CARRIER ARM HOLES x2Ø60mm (2⅜")

415mm (16⅜")

BACK VIEW

155mm (6⅛")

320mm(12½")

95mm(3¾")

105mm(4⅛")

220mm(8⅝")

100mm (4")

MOUNTING HOLES x2Ø10mm (⅜")

MOUNTING HOLES x2Ø16 x 22mm (⅝" x ⅞")

515mm (20¼")

465mm(18¼")

375mm (14¾")

190mm(7½")

ARM LOCKING HOLES x6Ø25mm (1")

Ø35mm(1⅜")

92mm(3⅝") 130mm (5⅛")

110mm (4⅜")

115mm (4½")

415mm (16⅜")

Ø68mm(2⅝")

Ø43mm(1⅝") 110mm (4⅜")

NOTE: CSA Z8000 requires a sink installation height of 34".

(31" - 34")

842mm- 865mm

260mm(10¼")

72mm(2⅞")

60mm(2⅜")

230mm(9")

(11⅜")290mm

(4¾")120mm Min

(3⅞")98 mm

FINISHED FLOOR

FIN

ISH

ED W

ALL